Abstract
Introduction: Accelerated rehabilitation programs following ACL reconstruction require adequate fixation strength. Staple fixation of grafts outside the tibial tunnel has been shown to have fixation strength comparable to interference screws. The use of bioresorbable polymer implants has potentially significant advantages especially if revision is required. The purpose of this study was to evaluate a new bioresorbable fixation staple using an ovine model.
Materials and Methods: Forty-eight mature sheep underwent unilateral cranial cruciate ligament (CrCl) reconstruction. The reconstruction comprised a loop of superficial digital flexor tendon (autograft) joined to a prosthetic ligament (LK-15). Femoral fixation was by endobutton. Tibial fixation of the LK-15 was with either a new Poly-L-lactic acid (PLLA) staple (Zimmer Japan/Gunze Ltd.) or a Cobalt-chrome (CoCr) staple. Biomechanical and histological responses were evaluated at 0, 6, 12 and 24 weeks.
Results: At all times post-reconstruction there were no significant differences between staple types for construct strength or stiffness (p> 0.05). The staple was not the site of reconstruction failure, and there were no adverse tissue reactions, for either staple type. Fibrous tissue was more often found at the interface of the CoCr staple.
Conclusions: The PLLA staple performed biomechanically as well as the metal staple for tibial fixation of cruciate ligament reconstructions. There were no significant observable adverse histological responses over the time intervals examined.
The abstracts were prepared by Professor Jegan Krishnan. Correspondence should be addressed to him at the Flinders Medical Centre, Bedford Park 5047, Australia.