Stem loosening can be associated with a wide spectrum of bone loss and deformity that represent key factors for choosing the most appropriate revision implant. The aim of this study was to evaluate the clinical outcomes and the survivorship of a consecutive series of THA revisions using a taper rectangular cementless stem for primary implants (Alloclassic® Zweymuller®, Zimmer Warsaw US) at medium-term follow-up. We retrospectively evaluated 113 patients (115 revisions) who underwent femoral revision with Zweymuller stem with a preoperative Paprosky I (86) or II (29) defects from January 2011 to December 2020. The mean follow up was 6 years (2–10). The median age at time of surgery was 71(41–93) with 60 males and 53 females. Osteolysis/radiolucency were observed in the following Gruen zones: I (91), II (3), III (2), VII (15), V (3), VI (1). Clinical assessment was performed by means of Harris Hip Score (HHS) and Visual Analogic Scale (VAS), whereas for the radiological analysis we used conventional x-rays of the hips. The statistical analysis was performed using Graphpad Prism v5.0 and data distribution was assessed by Shapiro-Wilk test, and Wilcoxon matched paired test was used to test the differences between preoperative and postoperative score. 9 patients were lost to fu (deceased or not available), 104 (106 hips) were evaluated. The mean HHS and VAS significantly improved at final follow-up, going from 33,84 and 5,78 preoperatively to 66,42 and 2,05 postoperatively, respectively. 28 patients (25%) showed unprogressive radiolucent lines in Gruen zones 1 and 7 with no other radiological nor clinical signs of loosening. One patient suffered from recurrence of the infection. The survivorship with stem revision as endpoint was 100%. Alloclassic Zweymüller primary stem showed good medium-term results and survival rate in revision THA for aseptic loosening and second stages of two stage revisions.
The analysis of synovial fluid has proved to be of crucial importance in the diagnostic process of prosthetic joint infections (PJI), suggesting the presence of an infection before the microbiological culture results. In this context, several studies illustrated the efficacy of synovial calprotectin in supporting the diagnosis of PJI [1, 2]. However, several testing methods have been explored to detect synovial calprotectin levels, emphasizing the need to use a standardized, rapid and rapid test. In this study, synovial calprotectin was analyzed by means of a commercial stool test [3] to explore whether the detected levels might predict PJIs and, therefore, being a promising tool for the fast and reliable diagnosis of this complication. The synovial fluid of 55 patients underwent to revision of the prosthetic implant were analyzed. The measurement of calprotectin was carried out by of commercial stool test, following the protocol for liquid samples. Calprotectin levels were then compared to other synovial biomarkers of PJI such as leucocyte esterase and count and percentage of polymorphonuclear cells. Data analysis were performed using R software v4.1.1 (R Core Team) and package “pROC” [4]. Receiver operator characteristics curves were designed using culture test as gold standard to evaluate the area under curve (AUC) of each method (with DeLong method for confidence-interval calculation). Thresholds were calculated to maximize Youden's index; sensitivity and specificity were reported. One-to-one Pearson's correlations coefficient were calculated for each pair of methods. P value <0.05 were considered statistically significant.Aim
Method
The transition from shutdown of elective orthopaedic services to the resumption of pre-COVID-19 activity presents many challenges. These include concerns about patient safety, staff safety, and the viability of health economies. Careful planning is necessary to allow patients to benefit from orthopaedic care in a safe and sustainable manner. Cite this article:
Leucocyte esterase (LE) has been shown to be an accurate marker of prosthetic joint infection (PJI), and has been proposed as an alternative to frozen section (FS) histology for intraoperative diagnosis. In this study, the intraoperative assessment of LE was compared with FS histology for the diagnosis of prosthetic hip infection. A total of 119 patients undergoing revision total hip arthroplasty (THA) between June 2015 and December 2017 were included in the study. There were 56 men and 63 women with a mean age of 66.2 years (27 to 88). Synovial fluid was collected before arthrotomy for the assessment of LE using enzymatic colourimetric strips. Between five and six samples were stained with haematoxylin and eosin for FS histology, and considered suggestive of infection when at least five polymorphonuclear leucocytes were found in five high-power fields.Aims
Patients and Methods
Leukocyte esterase (LE) has shown to be an accurate marker of prosthetic joint infections and has been proposed as an alternative to frozen section (FS) for intra-operative diagnosis. In this study, intra-operative determination of LE was compared with FS for the diagnosis of periprosthetic hip infections. One hundred and nineteen patients undergoing hip revision surgery due to prosthetic joint failure from June 2015 to December 2017 were considered. Joint fluids were collected before the arthrotomy for determination of LE which was performed by using enzymatic colorimetric strips. Four to six samples were stained with hematoxylin eosin for FS and considered suggestive for infection when at least 5 polymorphonuclear leukocytes in 5 fields at high power fields were found. Sensitivity and specificity of LE were 100% and 93.8 %, respectively. The positive predictive value was 79.3 %, while the negative predictive value was 100%. Time from collection to response was 20.1 ± 4.4 minutes. Sensitivity and specificity of FS were 83.3 % and 92.1 %, respectively. The positive and negative predictive values were 84.6 % and 97.1%. Time from sample collection response was 27.2 ± 6.9 minutes. LE showed a higher sensitivity and a slightly lower specificity and the same diagnostic accuracy of intraoperative FS. The faster turnaround time (about 20 minutes from receiving of sample by the laboratory), its ease of use and the low costs make this test a valuable alternative to frozen sections and is going to replace FS in our clinical practice.
Previous studies showed that a fast-resorbable antibacterial hydrogel coating (DAC®, Novagenit Srl, Mezzolombardo, TN, Italy) composed of covalently linked hyaluronan and poly-D, L-lactide, is able to reduce early post-surgical infection both after joint replacement and osteosynthesis. Aim of the present report is to investigate medium-term safety and efficacy of the coating in patients undergoing primary and revision cementless total hip replacement (THR). We designed a two-phases study. In both phases, DAC was prepared according to manufacturer's instructions. In brief, the syringe prefilled with 300 mg of sterile DAC powder was mixed, at the time of surgery, with a solution of 5 mL of sterile water and with the tailored antibiotics, at a concentration ranging from 25 mg/mL to 50 mg/mL. The resulting antibacterial hydrogel was then spread on the outer surface of the prosthesis just before implantation. In the first phase, safety was assessed. Forty-six patients (13 primary and 33 revision THR) were treated with DAC between 2013 and 2015 and evaluated at a 2.8 ± 0.7 years follow up (FU). Antibiotics used for DAC reconstruction were Vancomycin in 33 cases, Vancomycin + Meropenem in 10, Vancomycin + Rifampicin, Teicoplanin or Ceftazidime in 1 case, respectively. Patients were evaluated at 3, 6, 12 months and yearly after with a clinical and radiographic FU. No evidence of infection and no failure/loosening of the prosthesis were observed. No adverse events were reported. The second phase was designed to evaluate efficacy of DAC in preventing infection recurrences after a two stage revision for infected THR. Twenty-seven patients, treated with DAC coating, were compared with a control group of 32, treated in the same time period, without the coating. Demographics, host type and and identified bacteria were similar in the two groups (18.6% of MRSA in DAC group vs 18.5% MRSA in no-DAC group). Patients were evaluated clinically and radiographically at 3, 6, 12 months and yearly thereafter. At a minimum 2 years FU (mean 2.7), we observed 1 dislocation in each group and 2 cases of loosening in the no-DAC group. 4 cases (11%) of recurrence of infection in the no-DAC group (1 MRSA and 3 St. Epidermidis) and no infection recurrences in the DAC group. Due to the small cohort of patients this difference is not statistically significant (Fisher's exact test, p=0.18). This is, to our knowledge, the longest observation concerning the safety and efficacy of the DAC antibacterial coating, applied to hip replacement. The results are in line with those previously reported and point out the absence of side effects of the antibacterial coating in this application and the tendency to reduce re-infection in second stage. This finding needs to be confirmed by a larger dataset.
Reliability of microbiological diagnosis of prosthetic joint infection [PJI] strongly depends on the ability to dislodge microorganisms from biofilm and on the rate of contaminating samples during collection in the operating room and processing. The aim of a correct protocol is to avoid false negative and false positive results in order to adapt the correct therapy for each patient. The object of the present study was to evaluate the impact of a novel closed bag system designed for samples collection and processing based on dithiothreitol (DTT), which is a sulfydryl compound able to remove bacteria from biofilm (MicroDTTect, 4i, Italy), on isolation of contaminant microorganisms in hip prostheses. Specimens (prostheses, spacers, periprosthetic tissues) were aseptically collected according to a standard protocol into the device, which was transported to the laboratory for culture. Three different models of the system were prospectively evaluated, each being a development of the previous one. The first generation device consisted in an “open” system (DTT eluate was collected with a syringe and dispensed into sterile tubes), the second generation device in a “partially closed” system (DTT eluate collected directly in sterile vacuum tubes) and the third generation device in a “completely closed system” (DTT reservoir directly connected with sealed tubes inside the device). PJI was diagnosed following criteria established by MSIS. The overall contamination rate, sensitivity and specificity of the first generation “open” system MicroDTTect were respectively 2.6% (1/39), 82.3% and 95.4% in 39 hips. The second generation “partially closed” device was characterized by a contamination rate of 1.96% (1/51), a sensitivity of 84% and a specificity of 96.1% in 51 hips. Contamination rate further decreased in the third generation “closed” system (1.89%, 2/106), while sensitivity (91.3%) and specificity (96.7%) improved in 106 hips. Differences have been also observed in hips (106) when compared to knees (70 cases) prosthetic infections (sensitivity 91.3% vs 89.3% and specificity 96.7% vs 100%). Our data show as, thanks to its ease of use, low contamination rate and high sensitivity, MicroDTTect can represent a useful tool for improving the microbiological diagnosis of PJIs in hip revisions and has replaced sonication in our practice.
Trabecular Titanium™ (TT) is a novel material with a structure similar to trabecular bone, already used for prosthetic clinical applications. Being the bone-implant interface the weakest point during the initial healing period, the association of TT with a hydrogel enriched with progenitor cells and osteoinductive factors may represent a promising strategy to improve prosthesis osteointegration. In a previous in vitro study we evaluated the ability of an ammidated carboxymethylcellulose hydrogel (CMCA) and of TT enriched with CMCA to support bone marrow mesenchymal stem cells (BMSCs) viability and osteogenic differentiation [1]. The aim of this study was to evaluate in vivo if the association of TT with CMCA enriched with strontium chloride (SrCl2) and BMSCs could ameliorate TT osteointegration. This study combines TT with CMCA, SrCl2 and BMSCs. To mimic prosthesis-bone implants, TT discs were seeded with human BMSCs predifferentiated in osteogenic medium, then press-fit into engineered bone. A total of 36 athymic mice were implanted subcutaneously, each animal received 2 constructs as un-seeded TT and TT+CMCA or cell seeded TT+BMSCs and TT+CMCA+BMSCs. After 4, 8 and 12 weeks, osteodeposition, bone mineral density (BMD) and osteointegration were evaluated by fluorescence imaging, micro-CT, SEM, histology and pull-out tests.INTRODUCTION
METHODS
This paper offers a summary of the ethical guide
for the European orthopaedic community; the full report will be
published in the EFORT Journal. Cite this article:
Many patients who underwent a THA, report a feeling of more “physiological” hip and of faster recovery when bigger heads are used. The aim of this study is to evaluate the walking recovery of patients after THA with different head diameters by the means of gait analysis. A prospective, randomized, blind study was conducted on 60 patients operated by THA at our Institution. Inclusion criteria were: primary hip arthritis, women, age between 55 and 70 years. Exclusion criteria were: other problems influencing walking ability (previous operations of the lower limbs, spine disorders, knee or controlateral hip arthritis). The same uncemented stem, same uncemented press-fit cup, same surgical technique and approach (posterolateral), same surgeons, same postoperative protocol and rehabilitation were employed. The only difference was the head diameter. The patients were randomized into three groups, of twenty patients each one (28mm Cer-on-XPE, 36mm Cer-on-XPE, >42mm Met-on-Met). The gait evaluation have been performed at three temporal steps: preoperatively, two months postoperatively and four months postoperatively. Kinematic parameters were acquired with Elite opto-electronic system (BTS, Milan, Italy) equipped with 6 cameras at 100 Hz frame rate. The system is integrated with a force platform (Kistler, CH) and a synchronic video system using two cameras (BTS, Milan, Italy). Data acquisition and processing were carried out using passive markers positioned according to Davis protocol. At least ten trials for each session were collected in order to assess the repeatability of the results. Gait analysis included kinematic parameters (temporal-spatial parameters and joint angular values) and kinetic parameters (ground interaction forces during walking). Articular moments and powers were computed on the basis of data obtained from dynamometric platform along with those given by kinematic analysis. All patients were compared to a control group. Wilcoxon signed rank test was employed for statistical evaluation.BACKGROUND
MATERIALS AND METHODS
The hips operated before 1985 were 14. The patients were 10, in 4 cases the operation was bilateral. There were 9 females and 1 male. The average age of the patients at the time of the operation was 19.3 years. All the patients had a DDH without X-ray signs of osteoarthritis and had a mild or absent pain. In 9 cases the isolated periacetabular osteotomy was performed and in 5 cases a femoral varus osteotomy was associated at the same time. The osteotomies were Wagner type I in 12 cases and Wagner type III in 2 cases. We always used a Smith-Petersen approach. The periacetabular osteotomy was made by special spherical chisels of different diameter under X-rays control. The fixation of the osteotomy was made in 8 cases according to the original technique with a special double horn plate fixed by screws to the ileum and in 6 cases only with the help of Kirsches wires, as actually we prefer. 10 cases with a clinical and X-ray follow-up longer than 20 years have been controlled. 4 cases are lost to follow-up. Occurrence and type of pain, walking, limp, range of motion were evaluated. Wiberg CE angle, signs of osteoarthritis and centre of rotation of the head are observed on the X-rays.
