Articular cartilage damaged through trauma or disease has a limited ability to repair. Untreated, these focal lesions progress to generalized changes including osteoarthritis. Musculoskeletal disorders including osteoarthritis are the most significant contributor to disability globally. There is increasing interest in the use of mesenchymal stem cells (MSCs) for the treatment of focal chondral lesions. There is some evidence to suggest that the tissue type from which MSCs are harvested play a role in determining their ability to regenerate cartilage We carried out a systematic literature review on the effectiveness of synovium-derived MSCs (sMSCs) in cartilage regeneration in Abstract
Objective
Methods
3D printing of synthetic scaffolds mimicking natural bone chemical composition, structure, and mechanical properties is a promising approach for repairing bone injuries. Direct ink writing (DIW), a type of 3D printing, confers compatibility with a wide range of materials without exposing these materials to extreme heat. Optimizing ink properties such as filament formation capabilities, shear-thinning, and high storage modulus recovery would improve DIW fabrication characteristics. In this study, composite inks based on biodegradable polycaprolactone (PCL), reinforced with nano-hydroxyapatite (HAp), and loaded with vancomycin were designed and evaluated for their rheological properties, wettability, mechanical properties, and antimicrobial properties. The formulated composite inks displayed a shear-thinning behaviour exhibited storage modulus recovery percentages above 80% for all formulations, which is essential for extrusion deposition by DIW at room temperature. Ink formulations were able to form fully interconnected lattice scaffolds with porosities ranging from 42% to 65%. Increasing the HAp concentrations from 55% to 85% w/w increased the shear thinning behaviour and reduced the printed filament width to more closely match the nozzle diameter; this indicates higher HAp proportion reduces ink shrinkage. The scaffold had high wettability at HAp proportions above 65% w/w and the compressive elastic modulus of DIW printed scaffolds exhibited within the range of trabecular bone. Antimicrobial activity was apparent from the agar diffusion assay; zones of inhibition ranging from 15.82 ± 0.25 mm and 20.06 ± 0.25 mm were observed after 24 hr for composite scaffolds loaded with 3% and 9% w/w vancomycin respectively. Vancomycin-loaded PCL/HAp composite inks were developed, displaying good printability, wettability, mechanical properties, and antimicrobial properties, making them an attractive choice for bone repair and regeneration. (b) declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research reported:I declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research project.Abstract
Declaration of Interest
The stable inhibition of miR-214 in the aged osteoporotic rats induced by OVX could be achieved by periodic administration of AntagomiR-214 at a dosage of 4 mg/kg and at an interval of 7 days, which will provide a potential bone anabolic strategy for treatment of osteoprosis. MiR-214 has a crucial role in suppressing bone formation and miR-214 inhibition in osteogenic cells may be a potential anabolic strategy for ameliorating osteoporosis (Wang X, et al. 2013). An aged ovariectomised rat has been regarded as a golden model to test bone anabolic agents for reversing established osteoporosis in aged postmenopausal women (Li X, et al. 2009). However, there is still lack of evidence to demonstrate bone anabolic potential of therapeutic inhibition of miR-214 within osteogenic cells in the golden model. So, it should be necessary to establish RNAi-based administration protocol toward stable inhibition of miR-214 at a low level in the golden model. A targeted delivery system specifically facilitating Antagomir-214 approaching osteogenic cells, Summary Statement
Introduction
