Questions/purposes

Is it possible to measure the linear wear rates in the non-cross-linked polyethylene liner used in the Press Fit Condylar (PFC) Sigma total knee system? Does the polyethylene wear influence on the clinical results?

Methods

Forty percent of 330 THAs for DDH were defined as shallow dysplastic hips. The Ad-BBG method was performed on 102 hips (78% of shallow hips). For the 24 remaining hips, THA was performed using the conventional interposition bulk bone grafting (8 hips)or without bone grafting by using rigid lateral osteophyte (16 hips). Operative Technique: Theresected femoral head was sectioned at 1–2-cm thickness, and a suitable size of the bulk bone graft was placed on the lateral iliac cortex and fixed by polylactate absorbable screws. Autogenous impaction morselized bone grafting, with or without hydroxyapatite granules, was performed along with the implantation of medial reduced cemented socket. Radiographic criteria used for determining loosening were migration or a total radiolucent zone between the prosthesis/bone cement and host bone. The follow-up period was 10.2 ± 2.6 (range, 6.0–15.0) years.

MATERIALS and METHODS

With modification of Crowe's classification, shallow dysplasia was defined and classified (Fig. 1). Between October 1999 and August 2008, 120 hips of 302 THAs for dysplastic hip were defined as shallow and Ad-BG was done in 96 hips (80% of shallow hips). For 24 hips with shallow dysplasia, THA were performed by using conventional type of interpositional bulk bone graft (Ip-BG) (8 hips) or without bone graft by using rigid lateral osteophyte. All patients were followed clinically using the Japanese Orthopaedic Association (JOA) score and also Merle d'Aubigne and Postel (M&P) scores in a prospective fashion, and radiographs were analyzed retrospectively. The criteria used for determining loosening were migration or total radiolucent zone between the prosthesis (or bone cement) and host bone. The mean follow-up periods were 8.0 ± 2.3 (5.0–13.5) years.

PATIENTS AND METHODS:

A total of three hundred and fifty patients (three hundred and eighty three hips) who had had a total hip arthroplasty had digital radiographs made a set of anteroposterior radiographs for each patient: one radiograph was made with the patient supine and one was made with the patient standing in full weight bearing on the replaced hip. The patients were divided into the following two groups: 1) seventy-five patients (eighty-three hips) with conventional polyethylene (CON) (group-1); 2) two hundred and seventy-five patients (three hundred hips) with highly cross-linked polyethylene (XPL) (group-2).

The set of radiograph was taken at three weeks postoperatively and at the time of semiannual follow-up. The average ceramic femoral head penetration was measured with radiographs taken in the standing or supine position at the final follow-up and compared with those of three weeks postoperatively. A single researcher with use of a computerized measurement system performed all measurements on the radiographs of the two-dimensional position of the head. Follow-up period were 13.5 ± 1.0 (range. 11.0–15.5) years in group-1 and 7.6 ± 2.1 (range. 5.0–12.6) years in group-2.

PATIENTS AND METHODS

All patients who had undergone a primary THA in our hospital from October 2010 were selected, and we excluded those with severe osteoarthritis, severe dysplasia (Crowe group), or excessive femoral neck anteversion (35°). This resulted in 60 patients (16 men and 44 women), with a mean age of 66.6 years (range, 47–83 years). The diagnoses were osteoarthritis in 42 hips, osteonecrosis in 11 hips, rheumatoid arthritis in four hips, and femoral neck fracture in three hips. A virtual hip model was generated from the preoperative CT scan and a component was virtually implanted via computer simulation software (Zed Hip, LEXI, Japan). The acetabular cup was implanted with an inclination of 45°, anteversion of 20°, and the femoral stem was implanted into the femur recreating the same head height with an anteversion of 25°. We defined three leg positions: (A) maximum flexion (B) internal rotation with hip in 90°of flexion and 20°of adduction as posterior dislocation, and (C) external rotation with hip in 0°of extension as anterior dislocation. In each leg position, range of motion up to the impingement and the type of impingement (implant or bone) was assessed with 22-, 26-, 28-, 32-, and 36 mm femoral head sizes.

PATIENTS AND METHODS

We have been collecting data on total hip arthroplasty since November, 1993. Reverse hybrid hip replacements were used mainly from February, 2001. We evaluated data on 272 reverse hybrid THAs (223 patients) from this year onward until May, 2010, and compared the results with those from 283 all-cemented THAs (237 patients) between 1993 and May, 2010. Eighty percent or more of patients had diagnosed as secondary osteoarthritis of the hip joint due to dysplasia in our hospitals. Highly cross linked ultrahigh molecular polyethylene (CLP) socket was introduced in October, 1999. We used conventional (not cross linked polyethylene) socket for 82 hips (cemented group-1) operated before October, 1999 and CLP socket for 201 hips (cemented group-2) in all-cemented cases. We used the Kaplan-Meier method for estimation of prosthesis survival and relative risk of revision. The endpoint was radiological loosening or revision. Socket linear wear rates were also assessed in radiographically. Clinical assessment was performed using the Japanese Orthopedic Association (JOA) scores and Merle d'Aubigne & Postel scores.

METHODS

Fourteen hips in 14 patients (all female; average age, 64 years) were treated with the above technique in primary (11 DDH) or revision THA (three loosened sockets). All patients were followed clinically in a prospective fashion, and radiographs were analyzed retrospectively. One initial patient had 16-year follow-up, whereas the remaining 13 patients had follow-up between four and 5.5 years.