The lastest biomechanical studies have shown that the load in the proximal femur is transferred not only medially but also laterally. Following these new philosophies, an original ultra-short stem with extensive proximal load transfer was developed. The main features of this implant are: an almost complete absence of the diaphyseal portion of the stem; a well defined lateral flare with load transfer also on the lateral column of the femur; and a high femoral neck cut which allows the preservation of most of the anterior, posterior and medial wall of the femoral neck (giving a complete proximal circumferencial bone in-growth). The implant, which we began to use in 1995 as a custom made prosthesis based on pre-operative CT data (140 cases), and later as a standard prosthesis (Proxima Hip 347 cases) was, in the first years, recommended only for young and active patients before being extended with very large indications also to elderly ones. Purpose of this paper is to present clinical and radiological results of 487 implants with an 7 yrs average follow-up. (14 yrs to 3 months). Harris Hip Score (HHS) formed the basis of the clinical assessment. Serial post-operative AP and lateral radiographs were taken for all patients.

Excellent results were reported: patients were followed-up for up to 14 years in all the series there were no revisions for aseptic loosening and only one case was revised for a deep infection. The mean HHS increased from 44.8 pre-operatively to 98.6 post-operatively at the latest follow-up. Tight pain was recorded only in one case. Other complications included 3 dislocations and 2 superficial wound infections. Radiographically good periprosthetic bone remodelling with increase of the bone stock around the implant. No radiolucent lines, subsidence or loosening have been observed.

In conclusion after a 14 year experience we can assert that neck preservation combined with a proximal lateral flare support guarantees a more natural loading of the femur and large indications. The absence of the stem makes this implant ideal not only for conventional surgical approach but also for MIS.

Bone preservation and physiological distribution of forces on the proximal femur are key elements in introducing a successful uncemented total hip replacement. In order to achieve this, in the mid 1990s, we developed an ultra short proximal loading custom-made component with a lateral flare, a high femoral neck osteotomy and without a diaphyseal stem.

We report the outcome of 129 custom-made hydroxyapatite-coated uncemented short femoral components inserted into 109 patients between June 1995 and May 2004. The mean age of the patients was 51 years (21 to 71) and the mean follow-up was eight years (4.9 to 14.1). Bone behaviour around the implant was studied on the post-operative radiographs. The mean Harris hip score improved from 44 (8 to 66) pre-operatively to 95 (76 to 100) at final follow-up. The Western Ontario MacMaster University Osteoarthritis index was 93 of 100 at final review. None of the patients reported thigh pain. A total of five hips were revised, three for polyethylene liner exchange and two for complete revision of the acetabular component. No femoral components were revised. The radiological changes in the proximal femur were generally good, as evidenced by spot welds both on the medial and lateral aspects of the femur. No component migrated. The presence of a lateral flare and use of a high osteotomy of the femoral neck provided good clinical and radiological results. The absence of a diaphyseal portion of the stem did not impair stability.

Introduction: Bone resorption in the proximal femur is commonly seen after cementless total hip arthroplasty (THA). One of the main determinants of bone remodeling seems to be prosthesis design. With DXA, the amount of bone mass after THA can be precisely determined. We evaluated the BMD behavior of two different ultra-short implants with proximal load transfer, in order to study how a design can affect femoral bone remodeling. The rationale behind these designs is the experimental evidence that loading the medial and the lateral flare effectively preserves in time metaphyseal bone stock. Moreover, biomechanical tests have confirmed that this kind of stress distribution allows to remove the diaphyseal portion of the stem.

Methods: A total of 33 patients operated with a cementless femoral implant were included in this study. Two slightly different designs were tested: Type 1 (Stanmore Orthopaedics), featuring an extremely short distal stem (n=10), and Type 2 (DePuy International Ltd), where distal stem was virtually absent (n=23). All implants were customized based on pre-operative CT data. The main features of these implants were the ultra-short stem and the large lateral flare. The rationale was to preserve bone stock and gain a more physiologic load transfer to the proximal femur thus preventing stress-shielding. DXA examination was performed on all patients 3 years after THA. Due to the peculiar design, a specific protocol of analysis with five regions of interest (ROI) was developed: ROI1 (greater trochanter), ROI2 and ROI4 (respectively lateral and medial of the ultra-short stem), ROI3 (below the tip) and ROI5 (calcar). The same protocol was applied to the non-operated contralateral femur and percentage contralateral BMD was calculated with the following formula: (BMD of operated hip/BMD of contralateral hip)×100. A standard DXA of contralateral hip and lumbar spine was also performed to evaluate the skeletal bone mineralization.

Results: No differences were found in the anthropometric data and sex between the two groups. Age was found lower (p=0.001) in Type 2. BMD of lumbar spine and contralateral femur from standard DXA were not different in the two groups. BMD was higher in Type 2 in ROI4 and ROI5 (p< 0.001). The calculated percentage contralateral BMD was higher in Type 2 in ROI2 (p=0.009), ROI4 (p< 0.001) and ROI5 (p=0.01).

Conclusions: This study confirms that progressive shortening of femoral stem produces a more proximal loading, which effectively preserves in time metaphyseal bone stock and increases periprosthetic BMD in the medial ROIs. The increased BMD in periprosthetic lateral and medial proximal regions in the operated hip respect to the contralateral femur seems to be due not only to the increased weight-bearing, but also to the specific ultra-short stem design.

Aims: Bone stock preservation is crucial when performing THR in young patients. Previous experiments have confirmed that a physiologic load transfer to the proximal femur has several advantages. First, there is experimental evidence (Fetto et al) that loading the medial and lateral flare effectively preserves in time metaphyseal bone stock. Second, biomechanical tests (Walker et al) have confirmed that with this kind of stress distribution it is possible to remove the diaphyseal portion of the stem.

Following this philosophy, an original ultra-short stem with extensive proximal load transfer was developed. Purpose of this paper is to present clinical and radiological results at 4 yrs average follow up.

Methods: Since June 1995, we implanted 118 stems in 101 patients. Average age at the time of surgery was 51 yrs (30-63) All operations were performed by the senior Author (FFS). Particular care was taken in preserving all the femoral neck and the trochanteric muscles. All implants were customised based on pre-operative CT data. Harris Hip Score (HHS) formed the basis of the clinical assessment. Serial post-operative AP and lateral radiographs were taken for all patients.

Result: Patients were followed-up for up to 9 years (mean follow-up 45 months) and results showed no stem related revisions or infections. The mean HHS increased from 44.8 pre-operatively to 98.6 post-operatively at the latest follow-up. Tight pain was recorded only in one case. Other complications included 2 dislocations, one trapped drain and 2 superficial wound infections. All stems appeared radiografically stable with a well maintained proximal bone stock. No radiolucent lines have appeared around the stem.

Conclusions: Results obtained in this group of relatively young patients have been encouraging. Clinical and radiographic results validate the assumption that torsional loads can be controlled even without the diaphy-seal portion of the stem. Neck preservation combined with lateral flare support guarantees a more natural loading of the femur. The absence of the stem makes this implant ideal for less invasive surgery.

Hip arthroscopy is a well-established technique becoming more and more an indispensable tool in institutions specialized in hip diseases. Several surgeons around the world have developed and refined the proper instruments and the surgical technique for this operation. By now, the indications have been well formulated for both diagnostic and interventional purposes.

My personal experience is of 98 hip arthroscopies performed in the last 6 years. Most common preoperative indication has been chronic hip pain after failure of conservative treatment. Other indications or arthroscopic findings have been: labral pathology, hip dysplasia, synovial chondromatosis, initial osteoarthritis, calcium pyrophosphate disease, ligamentum teres damage, chondral damage, post-traumatic loose bodies, avascular necrosis, sepsis, villonodular synovitis.

More recent, indications for hip arthroscopy are staging of avascular necrosis of the femoral head and shaving of polyethylene debris after total hip replacement.

Contraindications to arthroscopy include recent fracture of the pelvis osteoarthritis with osteophytosis, AVN with head collapse.

Hip arthroscopy can facilitate both comprehensive access to and treatment of an evolving series of conditions that affect the hip joint. Purpose of this presentation is to show the surgical technique and present the results obtained. New indications and potential future evolutions are also discussed.

Purpose: Operative treatment of diaphyseal humeral fractures is indicated for transverse displaced fractures, pathological or impending fractures, non unions, fractures with radial nerve palsy and oblique fractures after conservative treatment failure.

Different techniques are available but many surgeons have recently expressed a preference for retrograde nailing. We present our results with new generation retrograde self-locking nail.

Methodology: From 1998 to 2004, we treated 112 patients with the cannulated retrograde EXP nail (LIMA LTO). All patient have been operated in the prone position on a conventional orthopaedic table.

Proximal locking, in this device, is obtained by the angled protrusion of a wire from the nail proximal extremity. Experimental tests in the lab have confirmed the excellent torsion stability of this mechanism.

Distally, the EXP nail has two little wings shaped to sit on the medial and lateral columns of the olecranic fossa and to thus provide an effective rotational and traction control.

We treated 67 traumatic fracture, 15 pathological fractures, 10 impending fracture and 20 a non-unions. 10 patients in this series were obese.

Results: Average surgical time was 40 minutes (min 30 – max 110). Average radiation exposure was 1 minute and 15 seconds (20 seconds for proximal locking).

Union was obtained in all the 67 primary fractures and stability was secured for all the impending and pathological cases. All but 1 non-union healed after an average of 2.6 months. In 2 patients of the primary fractures and in 3 patients of the non-union group we had a delayed union. The 3 non-union patients healed after 5, 7 and 9 months respectively. Overall 9 of the 10 obese patients healed. No patients suffered shoulder pain. In 8 cases a reduction of less than 10 degrees of elbow extension was detected. Forty-five nails have been removed so far after an average of 11 months after nailing. No major problems in nail removal have been encountered.

Conclusions: Retrograde nailing of the humerus presents significant advantages over other techniques and is meeting more and more consensus. The nail employed in this series provides satisfactory stability, it is cannulated and requires minimal radiation exposure.

Aims: Most diaphyseal humeral fractures must be treated conservatively. Surgery is indicated for transverse displaced fractures, pathological or impending fractures, non unions, fractures with radial nerve palsy and oblique fractures after conservative treatment failure. Methods: Between March 1998 and July 2001 we operated on 80 patients with a diaphyseal humeral fracture. The cannulated retrograde EXP nail (LIMA LTO) was always employed. Proximal locking is obtained through the nail by causing angled protrusion of a wire from the proximal end of it and into the spongious (cancellous) bone of the humeral head. Distally the EXP nail has two little wings shaped to sit on the medial and lateral columns of the olecranic fossa and to thus provide a very effective rotational and traction control. In 51 cases it was a traumatic fracture; transverse, oblique unstable or polytrauma. In 10 cases a pathological fractures, in 7 an impending fracture, in 12 a nonunion. Nonunion cases had had a previous average of 2.5 operations. 10 patients were obese. Results: Average surgical time was 40 minutes. Average radiation exposure was 1 minute and 40 seconds. Union was obtained in all the 51 primary fractures and stability was secured for all the impending and pathological cases. All but 1 of the non-unions healed after an average of 2.6 months. The one failure was in an obese 65 yrs old lady with an oblique unstable non-union. No patients suffered shoulder pain. In 4 cases a reduction of less than 10 degrees of elbow extension was detected. Conclusions: The EXP humeral nail provides satisfactory stability, it is cannulated and requires minimal radiation exposure.

Aims: Stemmed cup is the evolution of Ring cup. The iliac stem is positioned in direction of sacro-iliac sin-condrosis, in axis with weight-bearing lines. It allows an optimal stability in the iliac bone avoiding the dameged acetabular region. The stemmed cup is indicated:

Ð in CDH primary implant

Ð in revision surgery (grade 2–4 according to Paproskyñs classiþcation). In severe bone loss cases (grade 3–4) we preferred to use auto or homologous bone grafts impacted to þll the bone defect. Methods:We report about 168 stemmed cup implants in 159 patients (9 bilateral cases). 37 CDH was treated as a primary implant (6 bilateral patients). The average age is 69 years (range 38–87). The mean follow up is 36 months (range 6 months Ð 6 years). 21 cases were lost at follow up. We evaluated all patients by X-rays at 1,3,6 months and every year and CT in some cases to check the iliac stem position. Results: 13 patients died because of non-related surgery. Superþcial infections 5 cases; deep infections 6 cases (two-stages revision); proximal migration < 1 cm. In 9 cases without loosening; malpositioning of the stem 7 cases; sciatic nerve palsy 5 cases (1 permanent case); DVT 3 cases.

Radiolucency around stem < 2 mm. 19 cases, radiolucency around the cup in 11 cases; bone grafts resorption 10 out of 57 cases. Mean preoperative Harris Hip Score was 60; mean postoperative HHS 85. Conclusions: The good mid-term results reported conþrm that stemmed cup is a valid solution in revision surgery with mid and severe bone loss but also in CDH when conventional cup are not indicated.

Aims: Avascular necrosis of the femoral head (AVN) evolves in destruction of the hip joint. Treatment of this disease is controversial. Early stages are treated with core decompression whilst in later stages þbular grafting, rotational osteotomy or THR are recommended. Purpose of this study is the evaluation of a new combined approach. Methods: We present a series of 147 AVN in 108 patients treated with the combination of core decompression, bone grafting and electrical stimulation. All surgery were performed with a minimal invasive technique and a dedicated set of instruments which allow for accurate and complete removal of the necrotic bone.

In 30 cases the disease was in Steinberg stage I, 58 stage II, 42 stage III and 17 stage IV. All patients were kept non weight bearing for 6 weeks and partial weight bearing for further 6 to 8 weeks. PEMF were used for 8 ours daily for 3 months. Average follow-up was 37 months (min 12 months, max 108). Both clinical and radiological results were evaluated. Results: We had a good radiographic result in 96% of cases in stage I, 85% stage II, 45% stage III and 27% stage IV. Clinically, we obtained good results in 87% stage I, in 81% stage II, in 65% stage III and in 48% stage IV. Clinical failure was deþned as the performance of a subsequent operation. None of the patients in stage I or II required further surgical treatment. Nine cases in stage III and 5 in stage IV required THR after an average of 19 months. Conclusions: Core decompression with bone grafting and electrical stimulation is a safe and effective procedure in Stage I and Stage II AVN. Promising results were obtained also in stage III and Stage IV.

Aims: Bone stock preservation is thought to be essential when performing THR in young patients. For this purpose we developed a new CAD-CAM titanium cementless femoral stem to be implanted with minimal femoral resection. This implant is constructed to þll completely the proximal metaphysis transferring loads on both the lateral ßare and the calcar. This allows the elimination of the diaphyseal portion of the stem which is prolonged only till approximately 1 centimetre below the lesser tro-canter. Methods: Since 1995, we implanted 76 stems in 71 patients. Average age was 51 yrs (30–63), 34 females and 37 males. Mean follow-up is 45 months (min.12, max 84 months). In all cases we employed an hemispherical pressþt cup. Metal to polyethylene interface was used in the þrst 30 implants whilst metal to metal coupling was chosen for the latter 46 hips. Clinically patients were evaluated with Harris Hip Score. All patients ware evaluated by X-ray 1, 3, 6 and every year postoperative. Results: Average preoperative value of HHS was 42,4, postoperative 98. Tight pain was never recorded. All the stems appear stable radiograþcally, we had no subsidence, no radiolucent lines, no stress shielding, no osteolisis. In 26,4% of cases we had mild proximal calcar resorption. Conclusions: Clinical and radiographic results conþrm that axial and torsional loads can be properly controlled even without the distal portion of the stem. We believe that maximal bone stock preservation in young patients undergoing THR is mandatory in view of the high possibility for these patients to require multiple revisions in the future.

Introduction: Stem alignment and cement mantle thickness influence stress distribution on the cement-bone and the bone-cement interfaces. Malposition of the implant and an incomplete cement mantle can lead to suboptimal long-term results. The proximal and distal centralisers that are currently available have shown severe limitations in their clinical application and do not centralise the stem in the lateral plane.

Aim: To evaluate a new stem-positioning system.

Method: One hundred Friendly (Lima LTO) stems implanted between October 1999 and October 2000 have been evaluated radiographically for stem centralisation and cement mantle thickness in both projections. One surgeon used the same technique in all patients and employed a newly designed set of proximal and distal centralisers.

Results: All cases had an acceptable and complete cement mantle. In only seven cases cement thickness was below 2mm in Gruen zone 14. Stem-bone contact was never observed. No patient had migration of the distal plug during pressurisation or complete cement defects. In eight cases mild (2 degrees to 4 degrees) valgus deviation of the stem was found. None of the distal centralisers failed whilst one of the proximal centralisers broke during insertion of the stem without influencing the final result.

Discussion: Cementing the stem is the most delicate phase of cemented total hip replacement. The use of proximal and distal centralisers is mandatory to prevent malposition which in turn results in incomplete cement mantle. The system employed in this series appears accurate and reproducible for stem alignment.

Introduction: Most diaphyseal humeral fractures can be successfully treated with conservative treatment. Nailing is indicated for transverse displaced fractures, pathological or impending fractures, non-unions, fractures with a radial nerve palsy and oblique fractures after failure of conservative treatment. Most surgeons prefer the distal retrograde approach to the humeral canal because of the high incidence of chronic shoulder pain after proximal nailing. However, when using such an approach targeting the holes for proximal static locking is demanding and time consuming. The EXP nail (LIMA LTO) is cannulated and has an original self-looking mechanism that is designed to match the advantages of the retrograde approach. These include rapid proximal locking and reduced radiation exposure.

The proximal locking is achieved by the protrusion of a wire into the medullary bone of the humeral head. Distally the EXP nail has two small wings shaped to sit on the medial and lateral columns of the olecranon fossa.

Cases: We implanted 56 EXP nails in 56 patients. The average surgical time was 40 minutes (min 30, max 110). The average radiation exposure was one minute and 40 seconds (20 seconds for proximal locking). In all cases we obtained fracture union and no patients suffered shoulder pain. In four cases elbow extension was reduced by less than 10. In one case the nail broke but the fracture united.

Conclusions: The EXP humeral nail provides satisfactory stability, it is cannulated and requires minimal radiation exposure.

We performed a randomised controlled study to compare heparin with the A-V Impulse System in the prevention of deep-vein thrombosis (DVT) in 132 consecutive patients undergoing total hip replacement. After the operation, all patients had compression stockings, 65 were treated with calcium heparin and 67 with the intermittent plantar pump. DVT was diagnosed by Doppler ultrasound and thermography, followed by phlebography. There were 23 cases of DVT (35.4%) in the heparin group, with 16 major and seven minor thromboses. In the impulse pump group there were nine cases (13.4%) with three major and six minor thromboses. The differences for all thromboses and for major thromboses were both significant at p < 0.005. In the heparin group there was one fatal pulmonary embolism and nine patients (13.8%) had excessive bleeding or wound haematomas, as against none in the impulse pump group.