Purpose

The effects of Acetabular Rim Osteophytes (ARO) in Total Hip Arthroplasty (THA), has not been quantified. During THA their presence and location is variable, and the effect on post-operative Range of Motion (ROM) is unknown. The purpose of this study was to evaluate the ROM of a modern hip implant in five cadaver models utilizing computerized virtual surgery, and to analyze the effect of AROs given their location on the acetabulum, and position of the prosthesis during motion.

We performed a meta-analysis of modern total joint replacement (TJR) to determine the post-operative mortality and the cause of death using different thromboprophylactic regimens as follows: 1) no routine chemothromboprophylaxis (NRC); 2) Potent anticoagulation (PA) (unfractionated or low-molecular-weight heparin, ximelagatran, fondaparinux or rivaroxaban); 3) Potent anticoagulation combined (PAC) with regional anaesthesia and/or pneumatic compression devices (PCDs); 4) Warfarin (W); 5) Warfarin combined (WAC) with regional anaesthesia and/or PCD; and 6) Multimodal (MM) prophylaxis, including regional anaesthesia, PCDs and aspirin in low-risk patients. Cause of death was classified as autopsy proven, clinically certain or unknown. Deaths were grouped into cardiopulmonary excluding pulmonary embolism (PE), PE, bleeding-related, gastrointestinal, central nervous system, and others (miscellaneous). Meta-analysis based on fixed effects or random effects models was used for pooling incidence data.

In all, 70 studies were included (99 441 patients; 373 deaths). The mortality was lowest in the MM (0.2%) and WC (0.2%) groups. The most frequent cause of death was cardiopulmonary (47.9%), followed by PE (25.4%) and bleeding (8.9%). The proportion of deaths due to PE was not significantly affected by the thromboprophylaxis regimen (PA, 35.5%; PAC, 28%; MM, 23.2%; and NRC, 16.3%). Fatal bleeding was higher in groups relying on the use of anticoagulation (W, 33.8%; PA, 9.4%; PAC, 10.8%) but the differences were not statistically significant.

Our study demonstrated that the routine use of PA does not reduce the overall mortality or the proportion of deaths due to PE.

Particles generated at the non articulating surface (backside) of modular acetabular components have been implicated in the development of periprosthetic osteolysis after total hip arthroplasty. Several design changes have been introduced in modern uncemented acetabular cups in an attempt to reduce backside wear, including the use of so called “non-modular cups”. We compared the backside wear of retrieved cementless non-modular cups, with modular cups of first and second generation designs.

Nine retrieved non-modular cups (Implex) were match paired for time in situ, patient age and weight, with 9 retrieved Trilogy cups, 9 Harris-Galante 1, and 9 Harris-Galante 2. The average time in situ was 2.5 years (1 to 7). The backside was divided in quadrants and each rated utilizing a score with a value from 0 (absence of wear) to 3 (severe backside wear) for a total ranging from 0 to 12. The score was validated for intra and inter observer reproducibility.

Among 36 quadrants in the HG1 group there were 3 rated 1, 23 rated 2, and 10 rated 3. In the HG2 group, there was 1 quadrant rated 0, 16 rated 1, 14 rated 2, and 5 rated 3. In the Trilogy group, there were 6 quadrants rated 0, 27 rated 1, and 3 rated 2. In the Implex group, there were 15 quadrants rated 0, 21 rated 1. The average total backside wear score and 95%CI were 8.4 (7.6–9.3); 7.3 (5.5–9.1); 3.7 (3.2–4.1); and 2.3 (1.3–3.4) respectively. The HG1 and HG2 groups demonstrated similar backside wear scores (p=0.3). The HG1 and HG2 designs demonstrated significantly more backside wear than the Trilogy and Implex (p< 0.01). The differences between the Trilogy and the Implex were not significant in this cohort.

A comparison of the “in vivo” backside wear of first generation and modern acetabular cups has not been published to date. Despite the limitations imposed by the small sample studied, the presence of multiple screw holes in the HG retrievals, and sub-optimal matching for sex, height, and varied indication for revision, we detected significant reduction in the backside wear of modern modular and non-modular acetabular cups when compared to first generation modular designs.

First generation uncemented modular cups reproduciblyfixed to bone but they were associated with unacceptable rates of pelvicosteolysis and mechanical failure. Consequently, second generation cups weredeveloped with shells having a limited number of holes or no holes, and improved conformity and locking mechanisms with the liner. The purpose of this study is to report the clinical and radiographic results of a second generation acetabular component for primary total hip arthroplasty.

297 patients who underwent 335 consecutive primary total hip arthroplasties by a single surgeon with the Trilogy modular acetabular component were followed clinically with the Hospital for Special Surgery Hip Scoring System and radiographs, for 4 to 7 years. All cups were implanted with a press-fit technique.

This second generation acetabular cup design achieved predictable fixation and was associated with a low prevalence of revision for loosening and low prevalence of osteolysis at an intermediate follow up.

The role of surface finish on the survivorship of cemented stems is controversial. The purpose of this study is to prospectively evaluate the mid-term clinical and radiographic performance of a cohort of patients who underwent total hip replacement with two identical cemented femoral stems differing only in surface finish (VerSys, Zimmer, Warsaw, IN).

64 total hip replacements with a rough stem (Ra: 70–100 micro inches) and 138 total hip replacements with a satin finish stem (Ra: 20–25 micro inches) were followed clinically and radio graphically for 4 to 7 years. All surgeries were performed by one surgeon, during a period of 1 year, utilizing the same surgical approach and technique, ace tabular cup, cement type and cementing technique. The groups had similar demographics, diagnosis, preoperative clinical score, cement mantle quality, alignment, and length of follow up.

The preoperative and postoperative Hospital for Special Surgery Hip Score at last follow up of the patients with a successful operation was not significantly different among the two groups. Five hips in the rough group and none in the satin group developed aseptic loosening and required revision (p=0.0009). The femoral bone-cement interface revealed progressive radiolucent lines or osteolysis in 8 out of 64 rough stems and in 3 out of 138 satin stems (p=0.01). There were progressive radiolucenciesor osteolysis in 44 out of possible 448 Gruen zones in the rough surface group and in 8 out of possible 966 Gruen zones in the satin finish group(p< 0.001).

A rough, textured stem is more likely to fail at intermediate follow-up than a satin surface stem. We recommend that the surface of cemented stems should be satin or polished, with a Ra of less than 20 micro inches.

Particles generated at the non articulating surface (backside) of modular acetabular components have been implicated in the development of periprosthetic osteolysis after THA. Several design changes have been introduced in modern acetabular cups in an attempt to reduce backside wear, including the use of “non-modular cups”. We compared the backside wear of retrieved cementless non-modular cups, with modular cups of first and second generation designs. Nine retrieved non-modular cups (Implex) were match-paired for time-in-situ, patient age and weight, with 9 retrieved Trilogy cups, 9 Harris-Galante 1, and 9 Harris-Galante 2. The average time in situ was 2.5 years (1–7). The backside was divided in quadrants and each rated with a value from 0 (absence of wear) to 3 (severe backside wear) for a total ranging from 0 to 12. This new score was validated for intra and inter observer reproducibility. Among 36 quadrants in the HG1 group there were 3 rated 1, 23 rated 2, and 10 rated 3. In the HG2 group, 1 quadrant was rated 0, 16 rated 1, 14 rated 2, and 5 rated 3. In the Trilogy group, 6 quadrants were rated 0, 27 rated 1, and 3 rated 2. In the Implex group, 15 quadrants were rated 0, 21 rated 1. The average backside wear score and 95%CI were 8.4 (7.6–9.3); 7.3 (5.5–9.1); 3.7 (3.2–4.1); and 2.3 (1.3–3.4) respectively. The HG cups demonstrated more severe backside wear than the Trilogy and Implex (p< 0.02). There was a tendency towards less backside wear in the Implex cup when compared to the Trilogy (p=0.04). The difference between the HG1 and HG2 was not significant. We detected significant reduction in the backside wear of modern modular and non-modular acetabular cups when compared to first generation modular designs.

The role of surface finish on the survivorship of cemented stems is controversial. The purpose of this study is to prospectively evaluate the mid-term clinical and radiographic performance of a cohort of patients who underwent total hip replacement with two identical cemented femoral stems differing only in surface finish (VerSys, Zimmer, Warsaw, IN). 64 total hip replacements with a rough stem (Ra: 70–100 microinches) and 138 total hip replacements with a satin finish stem (Ra: 20–25 microinches) were followed clinically and radiographically for 4 to 7 years. All surgeries were performed by one surgeon during a period of 1 year, utilizing the same surgical technique, acetabular cup, cement type and cementing technique. The groups had similar demographics, diagnosis, preoperative clinical score, cement mantle quality, alignment, and length of follow up. The preoperative and postoperative Hospital for Special Surgery Hip Score at last follow up of the patients with a successful operation was not significantly different among the two groups. Five hips in the rough group and none in the satin group developed aseptic loosening (p=0.0009). The femoral bone-cement interface revealed progressive radiolucent lines or osteolysis in 8 out of 64 rough stems and in 3 out of 138 satin stems (p=0.01). There were progressive radiolucencies or oste-olysis in 44 out of possible 448 Gruen zones in the rough surface group and in 8 out of possible 966 Gruen zones in the satin finish group (p< 0.001). A rough, textured stem is more likely to fail at intermediate follow-up than a satin surface stem. We recommend that the surface of cemented stems should be satin or polished, with a Ra of less than 20 microinches.

We evaluated the safety and efficacy of a multimodal approach for prophylaxis of thromboembolism after THA, which includes preoperative autologous blood donation; hypotensive epidural anesthesia; intravenous administration of heparin during surgery, before femoral preparation when the thrombogenesis is maximally activated; expeditious surgery, minimizing femoral vein occlusion and blood loss; pneumatic compression; and early mobilization after surgery. 1946 consecutive, non-selected patients (2016 THAs) who received multimodal thromboembolic prophylaxis were followed prospectively for 3 months. Only patients with history of thrombocytopenia (platelet count < 100.000) or adverse reaction to heparin were excluded. The average age was 65 years (14 to 93), ASA classification was 1 in 14%, 2 in 48%, 3 in 37% and 4 in 1% of patients. There was a history of DVT in 86 patients and PE in 35. After surgery, the patients also received pharmacologic prophylaxis for 6 weeks (aspirin 83%; warfarin 17%). The incidence of asymptomatic DVT assessed by ultrasound in the first 198 consecutive patients was 7.1% (14 of 198). The incidence of clinical DVT in the subsequent 1748 patients was 1.8% (32 of 1748). Symptomatic PE occurred in 0.56% (11 of 1946), none of them fatal. The rate of PE in patients receiving aspirin was 0.49% (8 of 1615) and warfarin 0.9% (3 of 331). There was 1 PE among 95 patients with a prior history of PE or DVT (1%). One morbidly obese patient died of a cardiac arrhythmia confirmed by autopsy. There was only one major bleeding complication: one patient with a history of coagulopathy developed hematuria requiring a bladder flush and five units of blood, with an uneventful recovery. No patients developed epidural hematoma following administration of intraoperative heparin. A multimodal approach to prevent thromboembolic disease, showed results that compare favorably with the literature, and with our historic control of 2592 THRs without intraoperative heparin (PE rate of 1%; 0.04% fatal). This multimodal approach appears safe and efficacious as thromboembolic prophylaxis. Our low rate of PE does not support routine anticoagulation prophylaxis with drugs with a significant risk of bleeding.

We report a prospective study of the liner-metal interfaces of modular uncemented acetabular components as sources of debris. We collected the pseudomembrane from the screw-cup junction and the empty screw holes of the metal backing of 19 acetabula after an average implantation of 22 months. Associated osteolytic lesions were separately collected in two cases. The back surfaces of the liners and the screws were examined for damage, and some liners were scanned by electron microscopy. The tissues were studied histologically and by atomic absorption spectrophotometry to measure titanium content. The pseudomembrane from the screw-cup junction contained polyethylene debris in seven specimens and metal debris in ten. The material from empty screw holes was necrotic tissue or dense fibroconnective tissue with a proliferative histiocytic infiltrate and foreign-body giant-cell reaction. It contained polyethylene debris in 14 cases and metal in five. The two acetabular osteolytic lesions also showed a foreign-body giant-cell reaction to particulate debris. The average titanium levels in pseudomembranes from the screw-cup junction and the empty screw holes were 959 micrograms/g (48 to 11,900) and 74 micrograms/g (0.72 to 331) respectively. The tissue from the two lytic lesions showed average titanium levels of 139 and 147 micrograms/g respectively. The back surfaces of the PE liners showed surface deformation, burnishing, and embedded metal debris. All 30 retrieved screws demonstrated fretting at the base of the head and on the proximal shaft. Non-articular modular junctions create new interfaces for the generation of particulate debris, which may cause granulomatous reaction.

We reviewed 19 revision hip arthroplasties in which the new femoral component had been recemented into the old, intact cement mantle. The mean time from the first operation to revision was 64 months and the average follow-up was 59 months. There were 7 excellent, 11 good, and one fair result. No femoral component had been revised for loosening and all the stems appeared radiographically stable. Complications included intraoperative perforation of the femur on two occasions and one dislocation. The use of the cement-within-cement technique requires that the old cement surface be dry and roughened to increase the surface area and that the cement be injected in the liquid phase to prevent lamination. The indications for this technique include a broken stem with an intact distal cement mantle, the removal of a femoral component for revision of a loose cup to improve exposure and/or increase offset, recurrent dislocation secondary to component malposition, and debonding of the femoral component within an intact cement mantle.

We reviewed the plain radiographs, bone scans and hip aspiration results of 54 patients with painful hip arthroplasties which had been explored surgically, to compare the results of the investigations with the operative findings. For acetabular loosening, the sensitivity and specificity of bone scanning were 87% and 95%, with an accuracy of 90%: for serial plain radiography sensitivity was 95%, specificity 100% and accuracy 97%. For femoral component loosening, bone scan sensitivity was 85%, specificity 100% and accuracy 89%: the sensitivity of plain radiography was 100%, with specificity 92% and accuracy 98%. Technetium bone scanning did not provide additional information with regard to loosening and is not necessary in the routine investigation of a painful hip arthroplasty. Serial pain radiography is the most effective method of detecting loosening, and bone scanning is useful only when radiography is inconclusive with regard to loosening or infection.

Reports of differing failure rates of total hip prostheses made of various metals prompted us to measure the size of metallic and polyethylene particulate debris around failed cemented arthroplasties. We used an isolation method, in which metallic debris was extracted from the tissues, and a non-isolation method of routine preparation for light and electron microscopy. Specimens were taken from 30 cases in which the femoral component was of titanium alloy (10), cobalt-chrome alloy (10), or stainless steel (10). The mean size of metallic particles with the isolation method was 0.8 to 1.0 microns by 1.5 to 1.8 microns. The non-isolation method gave a significantly smaller mean size of 0.3 to 0.4 microns by 0.6 to 0.7 microns. For each technique the particle sizes of the three metals were similar. The mean size of polyethylene particles was 2 to 4 microns by 8 to 13 microns. They were larger in tissue retrieved from failed titanium-alloy implants than from cobalt-chrome and stainless-steel implants. Our results suggest that factors other than the size of the metal particles, such as the constituents of the alloy, and the amount and speed of generation of debris, may be more important in the failure of hip replacements.