Advertisement for orthosearch.org.uk
Results 1 - 2 of 2
Results per page:
Applied filters
Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_I | Pages 33 - 33
1 Mar 2010
Prayson MJ Markert RJ Peters PG Laughlin RT Manternach AL Randall KL
Full Access

Purpose: Surgical site infection remains a common concern in orthopaedic surgery. A multitude of factors contribute to colonization of the operative site, not all of which are controllable. This study investigates the time-dependent contamination of sterile C-arm covers as a potentially modifiable risk factor during routine fracture surgery.

Method: A consecutive fracture case study was performed from the two senior authors’ orthopaedic practices. Cultures were obtained from the top and side of the image intensifier cover after initial draping and every 20 minutes until the end of the operation. Survival time analysis was performed to evaluate the median time to first contamination.

Results: Twenty-five cases were enrolled with a mean operative time of 91.8 ± 42.9 minutes and an average people/hour/case of 9.6 ± 1.5. Time to contamination is correlated with person hours per case at 0.52 (p=0.07). The median survival time was 20 minutes (95% CI =12 to 68 minutes). There was 17% contamination upon initial draping, 50% at 20 minute, 57% at 40 minutes, 73% at 60 minutes and 80% by 80 minutes. Of the 30 cases, only 5 did not become contaminated during the surgery. The bacteria detected were Staphylococcus (59%), Corynebacterium (31%), Micrococcus (7%), and other (3%). There were no post-operative wound infections that required medical treatment.

Conclusion: A rapid and significant rate of contamination for C-arm drapes during orthopaedic fracture surgery was recorded. Based on these findings, the surgeon should not touch the C-arm cover to manipulate the machine. If contact with the C-arm cover is necessary, then a change of gloves is warranted to minimize contamination risk.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_I | Pages 33 - 33
1 Mar 2010
Prayson MJ Manternach AL Imbrogno B Sensiba PR Griffith DO Venkatarayappa I
Full Access

Purpose: Surgical staples are routine in closure of surgical incisions. Staples allow for expeditious closure and removal compared to suture materials. Concern exists, however, in obtaining an MRI scan when staples are present. The study analyzes common issues related to MRI scanning in the presence of surgical staples.

Method: Thirty pig feet had one-inch surgical incisions made and repaired with five standard stainless steel surgical staples. Two parameters were analyzed: temperature change on the skin surface and staples displacement. Once placed, each skin staple position was marked for later referencing. A surface temperature laser device (Fluke 62 Mini) recorded pre-scan skin surface temperature. A 35-minute MRI scan was performed using a 1.5 Tesla magnet with a standard knee coil for each of the pig feet in an MRI suite at ambient room temperature. Immediately afterwards, the skin surface temperature was recorded and distance measurements were made in relation to the pen markings. A paired T-test was utilized to analyze the pre and post-scan data.

Results: The mean temperature before the scans was 16.45 degrees Celsius with a standard deviation of 0.7 degrees. The median pre-scan temperature was 16.4 degrees. The minimum temperature was 14.6 degrees and maximum was 18.2 degrees. After scanning, the mean temperature was 16.02 degrees Celsius with a standard deviation of 0.63 degrees. The median post-scan temperature was 15.8 degrees. The minimum temperature was 15.0 and maximum temperature 17.6 degrees. The skin surface temperature showed a significant drop of 0.43 degrees Celsius (p=0.001). No change was recorded in staple position for any of the thirty pig feet pre-scan compared to post-scan.

Conclusion: Occasionally, patients require MRI scans after having surgery where staples have been used to repair the incision(s). Concern exists over heat generation or movement of the staples during the magnetic process. This study demonstrated no recordable increase in skin surface temperature or displacement of staple position after a standard extremity MRI scan. Based on the findings of this study, MRI scanning in the presence of surgical staples appears safe.