In cartilage tissue engineering (TE),new solutions are needed to effectively drive chondrogenic differentiation of mesenchymal stromal cells in both normal and inflammatory milieu. Ultrasound waves represent an interesting tool to facilitate chondrogenesis. In particular, low intensity pulsed ultrasound (LIPUS)has been shown to regulate the differentiation of adipose mesenchymal stromal cells. Hydrogels are promising biomaterials capable of encapsulating MSCs by providing an instructive biomimetic environment, graphene oxide (GO) has emerged as a promising nanomaterial for cartilage TE due to its chondroinductive properties when embedded in polymeric formulations, and piezoelectric nanomaterials, such as barium titanate nanoparticles (BTNPs),can be exploited as nanoscale transducers capable of inducing cell growth/differentiation. The aim of this study was to investigate the effect of dose-controlled LIPUS in counteracting inflammation and positively committing chondrogenesis of ASCs embedded in a 3D piezoelectric hydrogel.

ASCs at 2*10⁶ cells/mL were embedded in a 3D VitroGel RGD^® hydrogel without nanoparticles (Control) or doped with 25 µg/ml of GO nanoflakes and 50 µg/ml BTNPs.The hydrogels were exposed to basal or inflammatory milieu (+IL1β 10ng/ml)and then to LIPUS stimulation every 2 days for 10 days of culture. Hydrogels were chondrogenic differentiated and analyzed after 2,10 and 28 days. At each time point cell viability, cytotoxicity, gene expression and immunohistochemistry (COL2, aggrecan, SOX9, COL1)and inflammatory cytokines were evaluated.

Ultrasound stimulation significantly induced chondrogenic differentiation of ASCs loaded into 3D piezoelectric hydrogels under basal conditions: COL2, aggrecan and SOX9 were significantly overexpressed, while the fibrotic marker COL1 decreased compared to control samples. LIPUS also has potent anti-inflammatory effects by reducing IL6 and IL8 and maintaining its ability to boost chondrogenesis.

These results suggest that the combination of LIPUS and piezoelectric hydrogels promotes the differentiation of ASCs encapsulated in a 3D hydrogel by reducing the inflammatory milieu, thus representing a promising tool in the field of cartilage TE.

Acknowledgements: This work received funding from the European Union's Horizon 2020 research and innovation program, grant agreement No 814413, project ADMAIORA (AdvanceD nanocomposite MAterIals for in situ treatment and ultRAsound-mediated management of osteoarthritis).

Introduction

Articular cartilage injuries have a limited potential to heal and, over time, may lead to osteoarthritis, an inflammatory and degenerative joint disease associated with activity-related pain, swelling, and impaired mobility. Regeneration and restoration of the joint tissue functionality remain unmet challenges. Stem cell-based tissue engineering is a promising paradigm to treat cartilage degeneration. In this context, hydrogels have emerged as promising biomaterials, due to their biocompatibility, ability to mimic the tissue extracellular matrix and excellent permeability. Different stimulation strategies have been investigated to guarantee proper conditions for mesenchymal stem cell differentiation into chondrocytes, including growth factors, cell-cell interactions, and biomaterials. An interesting tool to facilitate chondrogenesis is external ultrasound stimulation. In particular, low-intensity pulsed ultrasound (LIPUS) has been demonstrated to have a role in regulating the differentiation of adipose mesenchymal stromal cells (ASCs). However, chondrogenic differentiation of ASCs has been never associated to a precisely measured ultrasound dose. In this study, we aimed to investigate whether dose-controlled LIPUS is able to influence chondrogenic differentiation of ASCs embedded in a 3D hydrogel.

Synovitis has been shown to play a role in pathophysiology of OA promoting cartilage destruction and pain. Synovium is mainly composed of synovial fibroblast (SF) and macrophage (SM) that guide synovial inflammation. Adipose stromal cells (ASC) promising candidate for cell therapy in OA are able to counteract inflammation. Two different subsets of macrophages have been described showing a pro-inflammatory (M1) and an anti-inflammatory (M2) phenotype. Macrophage markers: CD68, CD80 (M1-like) and CD206 (M2-like) were evaluated in osteoarthritic synovial tissue. GMP-clinical grade ASC were isolated from subcutaneous adipose tissue and M1-macrophages were differentiated from CD14+ obtained from peripheral blood of healthy donors. ASC were co-cultured in direct and indirect contact with activated (GM-CSF+IFNγ)-M1 macrophages for 48h. At the end of this co-culture we analyzed IL1β, TNFα, IL6, MIP1α/CCL3, S100A8, S100A9, IL10, CD163 and CD206 by qRT-PCR or immunoassay. PGE2 blocking experiments were performed. In moderate grade OA synovium we found similar percentages of CD80 and CD206. M1-activated macrophage factors IL1β, TNFα, IL6, MIP1α/CCL3, S100A8 and S100A9 were down-modulated both co-culture conditions. Moreover, ASC induced the typical M2 macrophage markers IL10, CD163 and CD206. Blocking experiments showed that TNFα, IL6, IL10, CD163 and CD206 were significantly modulated by PGE2. We confirmed the involvement of PGE2/COX2 also in CD14+ OA synovial macrophages. In conclusion we demonstrated that ASC are responsible for the switching of activated-M1-like to a M2-like anti-inflammatory phenotype, mainly through PGE2. This suggested a specific role of ASC as important determinants in therapeutic dampening of synovial inflammation in OA.

Mesenchymal stromal cells (MSCs) are promising candidate for cell therapy in osteoarthritis (OA) patients since that they exert anti-inflammatory, immunomodulatory, anti-fibrotic and anti-hypertrophic effects in the joint tissues. However, little is known about the OA milieu factors that could enhance the migration and tissue specific engraftment of exogenously injected MSC for successful regenerative cell therapy. GMP-clinical grade adipose stromal cells (ASC) were evaluated both in normoxic and hypoxic (2%O₂) conditions, with or without OA synovium milieu. We found that both OA synovial fluids and OA synoviocytes derived conditioned medium (CM) contain approximately the same amounts of different cytokines/chemokines (i.e. IL6, CXCL8, CXCL10, CXCL12, CCL2, CCL3, CCL4, CCL5, CCL11). ASC migration was significantly increased by both OA synovium milieu and not affected by normoxic or hypoxic condition. We identify that ASC migration was mainly influenced by different macrophage chemokines (i.e. CCL2, CCL3, CCL4). In hypoxic condition basal GMP-ASC showed an increase of CXCR3 and CCR3, a decrease of CCR1 and CCR5 receptors, while CXCR1, CXCR4, CXCR7, CCR2 and IL6R were not modulated. The addition of OA synovium milieu induced CCR3, CXCR3 and IL6R and decreased CCR1 and not affected CCR2, CCR5, CXCR1, CXCR4, CXCR7 in hypoxic condition. Our data demonstrated that GMP-ASC chemotaxis was mainly induced by macrophage chemokines. Moreover, we evidenced that hypoxia, as better condition to mimic the OA milieu, affected some GMP-ASC cytokine/chemokine receptors, suggesting the involvement of specific chemokine-receptor axis.

In clinical orthopedics suitable materials that induce and restore biological functions together with the right mechanical properties are particularly needed for the regeneration of musculoskeletal tissue. An innovative solution to answer this need is represented by tissue engineering. This technique could overcome the limits of traditional approaches involving the use of homologous, autologous or allogenetic tissue (e.g. tissue availability, immune rejection and pathogen transfer). In this field, rapid prototyping techniques are emerging as the most promising tool to realize three-dimensional tissue constructs with highly complex geometries.

Based on CAD/CAM technology, rapid prototyping allows development of patient-specific 3D scaffolds from digital data obtained with latest generation imaging tools. These structures can be realized in different materials, tailoring their mechanical properties and architectural features. Most rapid prototyping techniques allow the creation of acellular 3D scaffolds, which must be subsequently seeded with cells. Conversely, 3D bioprinting can deposit bio-ink containing molecules/cells, providing desired spatial distribution of growth factors/cells within the scaffold. The need of printable materials suitable for processing with inkjet, dispensing, or laser-print technologies, forces the use of matrices within a specific range of viscosity. However, these materials have low mechanical features. To overcome this problem and to obtain a final construct with good mechanical properties, bioprinting tissue fabrication can rely on the alternate deposition of thermoplastic materials and cell-laden hydrogels. Since mechanical performance is determined not only by the material properties but also by the geometry (microarchitecture) of the structure, printing parameters can be modified to obtain the desired features.

The new 3D platform available at Rizzoli Orthopaedic Institute, consisting of a Computer Tomography (GE Medical Systems, Milano, Italia) and a 3D Bio-Printer (RegenHU, Villaz-St-Pierre, Switzerland) is used to address the above-mentioned issues. Preliminary results showed that it is possible to modify the microarchitecture of the printed structures adjusting their apparent density and stiffness in the range of the trabecular bone tissue. Additionally, it has been proven that the calcium phosphate based paste, used as bioink, allows cell attachment and proliferation. Therefore, the platform allows to print scaffolds with open and interconnected porosities and suitable mechanical properties. They can be filled with different components such as cells or soluble growth factors at specific locations.

Aim of study: The development of tissue engineering techniques evidenced that the healing of injured ligaments require the interactions of different cell types, local cellular environment and the use of devices. In order to gain new information on the complex interactions between mesenchymal stem cells (MSCs) and biodegradable scaffold, we analysed in vitro the proliferation, vitality and phenotype of MSCs grown onto a multilayered-woven-cylindric-array of Hyaff-11A8 fiber configured as ligament scaffold.

Methods: Sheep MSCs were isolated from bone marrow aspirates and grown at two different density (7,5x106/cm and 15x106/cm) in the scaffold. At different time points (2, 4, 6 days) cellular proliferation was analysed by MTT test and cellular viability by calcein-AM immunofluorescence dye and confocal microscopy analysis. Moreover, hyaluronic acid receptor (CD44) and typical matrix ligament proteins (collagen type I, III, laminin, fibronectin, actin) were evaluated by immunohistochemistry.

Results: MSCs growth was cell density-dependent and cells were uniformly distributed inside and along the scaffold. Confocal analysis showed that MSCs completely wrap the fibers at both cell concentrations analysed and were all viable both outside and inside the scaffolds only using the lower cell concentration. Moreover, MSCs expressed CD44, collagen type I, III, laminin, fibronectin and actin.

Conclusion: These data demonstrate that MSCs well survive in a hyaluronic acid-configured ligament scaffold expressing a protein important for scaffold interaction, like CD44, and proteins responsible of the functional characteristic of the ligaments.