Advertisement for orthosearch.org.uk
Results 1 - 5 of 5
Results per page:
Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_30 | Pages 60 - 60
1 Aug 2013
Leung A Smith I Spadaccino A Muir A Simpson A
Full Access

Bone cutting produces heat which macroscopically leads to charring and the formation of bone dust. As part of a project to design a novel bone cutting device, we studied the extent of histological thermal damage from bone cutting with different cutting blades.

Three blades were used: a bone hacksaw made in the nineteenth century which was used for amputation, a sagittal saw blade made by Ortho Solutions, and a sagittal saw blade made by Stryker. Sheep femurs were harvested from recently euthanised animals and cuts were made with these three devices, producing ring-shaped bone specimens. Specimens were immediately stored in formaldehyde, decalcified, and stained with hematoxylin and eosin. The edge of the specimens was then photographed microscopically, and the images examined with the computer programme Axiovision (Carl Zeiss AG, Oberkochen, Germany). Visual examination allowed identification of live and dead osteocytes, and also to measure their depth from the surface.

A minimal of 7 images was obtained per blade. The hacksaw specimens had the highest percentage of live osteocytes (n=214, 59.8%), and with the shortest average depth where live osteocytes were located (169μm, SD 78.15). In comparison, the percentage of live osteocytes for the Ortho Solutions (n=156, 17.4%) and Stryker (n=168, 29.5%) blades were much lower. The difference in average depths where live osteocytes were located was statistically significant between the three groups (p < 0.001). The average depths of dead osteocytes were shallowest for the Stryker (115μm, SD 67.56) and hacksaw (118.28 μm, SD 75.16) groups with no statistical difference between them.

In conclusion the hacksaw appeared to produce the least thermal damage histologically during cutting. The results reflect a relationship between certain features in cutting blade designs and the extent of thermal damage. Future experiments to directly measure heat produced during cutting are planned.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_13 | Pages 56 - 56
1 Mar 2013
Leung A Smith I Spadaccino A Muir A Simpson A
Full Access

Bone cutting produces heat which macroscopically leads to charring and the formation of bone dust. As part of a project to design a novel bone-cutting device, we studied the extent of histological thermal damage from different cutting blades. Three blades were used: a nineteenth century bone hacksaw, and modern sagittal saw blades manufactured by Ortho Solutions and Stryker. Sheep femurs were harvested from recently euthanised animals and cuts were made with these blades. Specimens were immediately stored in formaldehyde, decalcified, and stained with hematoxylin and eosin. The edge of the specimens was then photographed microscopically, and the images examined with Axiovision software (Carl Zeiss AG, Oberkochen, Germany). Visual examination allowed identification of live and dead osteocytes, and also to measure their depth from the surface. A minimal of 7 images was obtained per blade. The hacksaw specimens had the highest percentage of live osteocytes (n=214, 59.8%), and the shortest average depth where live osteocytes were located (169 μm, SD 78.15). In comparison, the percentage of live osteocytes for the Ortho Solutions (n=156, 17.4%) and Stryker (n=168, 29.5%) blades were much lower. The difference in average depths where live osteocytes were located was statistically significant between the three groups (p<0.001). In conclusion the hacksaw appeared to produce the least thermal damage histologically during cutting. The results reflect a relationship between certain features in cutting blade designs and the extent of thermal damage. Future experiments to monitor heat produced during cutting are planned.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXVIII | Pages 25 - 25
1 Jun 2012
Gillespie A Leung A Miller R Moir J
Full Access

Complex Regional Pain Syndrome (CRPS) is regarded as an uncommon clinical complication to orthopaedic surgery. Few have looked into its prevalence in foot and ankle surgery.

This is a retrospective cohort study of all patients undergoing foot and ankle surgery, operated on by the foot and ankle team in our department in 2009. The objectives of this study was to determine the prevalence CRPS in these patients post-operatively and to examine the associated factors.

17 patients from 390 (4.4%) were identified as meeting the IASP (International Association for the Study of Pain) criteria for the diagnosis of CRPS. Of these, the majority were female (n = 14, 82.4%) and the average age was 47.2 (SD 9.7). All were elective patients. The majority involved operating on the forefoot (n = 9, 52.9%), followed by the hindfoot and ankle (3 cases each, 17.6%). Most of these patients had new onset CRPS (n = 12, 70.6%), with no previous history of the condition. 3 patients (17.6%) had documented nerve damage and therefore suffered from CRPS Type 2. Blood results were available for 14 (82.4%) patients at a minimum of 3 months post-operatively, and none had elevated inflammatory markers. 5 of the patients (29.4%) were smokers and 8 (47.1%) had a pre-existing diagnosis of anxiety or depression.

At present, based on our findings, we recommend that middle-aged women, with a history of anxiety or depression, undergoing elective foot surgery be specifically counselled on the risk of developing CRPS at consenting. We recommend similar studies to be undertaken in other West of Scotland orthopaedic units.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXVIII | Pages 22 - 22
1 Jun 2012
Leung A Hawthorn B Simpson A
Full Access

The treatment of chronic osteomyelitis requires both appropriate surgical and antibiotic management. Prolonged intravenous antibiotic therapy followed by oral therapy is widely adopted. Despite this, the long-term recurrence rate is around 20% to 30%.

The aim of this cohort study was to examine the effectiveness of surgical marginal resection in combination with local application of antibiotics (Collatamp G - gentamicin in a collagen fleece). Post-operatively this was followed by a short course of intravenous antibiotics, then oral antibiotics, to 6 weeks in total.

A cohort of 50 patients from a 10-year period, 2000 to 2010, with chronic osteomyelitis was identified. Most were male (n= 35, 70%) and the average age is 40.9 years (SD 15.9). The mean follow-up duration was 3.2 years (SD 1.8). The average length of admission was 9.8 days (SD 11.4). 6 patients (12%) suffered recurrence of infection requiring further treatment. We used the Cierny and Mader classification to further stratify the patients. ‘A’ hosts had a shorter duration of admission (7.1 days) than ‘B’ hosts (12.3 days). There was no significant difference between recurrence rates of ‘A’ and ‘B’ hosts. Where available, we found pre-operative C-reactive protein (CRP) and erythrocyte sedimentation rate (ESR) levels had no correlation with disease recurrence. Disease-free probability for this cohort compared favourably with a cohort treated with prolonged systemic and oral antibiotics (Simpson and colleagues, JBJS Br 2001).

We believe local administration of gentamicin in a collagen fleece is a useful component in the management of chronic osteomyelitis.


The Journal of Bone & Joint Surgery British Volume
Vol. 90-B, Issue 4 | Pages 520 - 526
1 Apr 2008
Yau WP Leung A Liu KG Yan CH Wong LS Chiu KY

We have investigated the errors in the identification of the transepicondylar axis and the anteroposterior axis between a minimally-invasive and a conventional approach in four fresh-frozen cadaver knees. The errors in aligning the femoral prosthesis were compared with the reference transepicondylar axis as established by CT.

The error in the identification of the transepicondylar axis was significantly higher in the minimal approach (4.5° of internal rotation, sd 4) than in the conventional approach (3° of internal rotation, sd 4; p < 0.001). The errors in identifying the anteroposterior axis in the two approaches were 0° (sd 5) and 1.8° (sd 5) of internal rotation, respectively (p < 0.001).