Non-invasive sampling of tumor-derived genetic material in circulation through liquid biopsy may be very beneficial for an accurate diagnosis and evaluation of response to treatment in patients with malignant and benign soft tissue tumors. We previously showed that tumor-derived genomic aberrations can be detected in plasma of patients with leiomyosarcoma (LMS) and leiomyoma (LM). In LMS patients, we also showed that the levels of circulating tumor DNA (ctDNA) correspond with response to treatment. We developed an approach tailored to genomic profile of LMS (characterized by intermediate levels of point mutations and copy number alterations, CNAs). Based on TCGA data, we designed a panel of 89 most frequently mutated genes in LMS, which we profiled in plasma DNA by deep sequencing. In parallel, plasma samples were analyzed by shallow whole genome sequencing for detection of CNAs. With this approach, we detected ctDNA in 71% (20/28) of samples from 6/7 patients with advanced disease with >98% specificity. The combination approach for orthogonal profiling of point mutations and CNAs proved to increase the sensitivity of ctDNA detection. Currently, we seek to further improve the sensitivity of ctDNA detection by refining our capture panel and tracking LMS-specific DNA methylation markers in circulation, in addition to point mutations and CNAs. The ultimate goals of our ctDNA studies are 1) to develop a highly sensitive assay for evaluation of response to therapy and long-term surveillance for patients with LMS, and 2) to develop a blood-based test for accurate pre-operative distinction between LMS and LM.

To identify LMS-specific DNA methylation markers, we analyzed a test cohort of 76 LM, 35 uterine LMS and 31 extra-uterine LMS by Illumina Infinium EPIC arrays. We identified differentially methylated CpGs between LM and uterine LMS, and between LM and all LMS using a newly developed custom pipeline in R. The results of this analysis are currently being validated in a new dataset of 41 LM and 153 LMS generated by our group. Recently published (PMID: 34301934) genomic data from new 53 LMS samples are used to refine the panel of the most frequently mutated genes that we identified previously in the LMS TCGA data.

Our preliminary analysis of test cohort revealed >270 differentially methylated CpGs between LM and uterine LMS, and >1000 differentially methylated CpGs between LM and all LMS. The preliminary analysis of genomic data shows that the initial panel of 89 frequently mutated genes could be substantially narrowed down to cover only selected tumor suppressor genes. Once validated, these results will be used to refine the ctDNA assay for LMS and LM.

Our results point to multiple epigenetic markers that could be used for ctDNA profiling, in addition to point mutations or CNAs. Further validation will allow us to select the most reliable LMS- and LM-specific DNA methylation markers and the most frequently mutated regions across independent datasets, and these markers will be incorporated into our new ctDNA test for a concurrent detection of point mutations, CNAs and DNA methylation markers in circulation.

Aims

To determine the value of scoliosis surgery, it is necessary to evaluate outcomes in domains that matter to patients. Since randomized trials on adolescent idiopathic scoliosis (AIS) are scarce, prospective cohort studies with comparable outcome measures are important. To enhance comparison, a core set of patient-related outcome measures is available. The aim of this study was to evaluate the outcomes of AIS fusion surgery at two-year follow-up using the core outcomes set.

Abstract

Abstract

Aims

The aim of this meta-analysis is to assess the association between exchange of modular parts in debridement, antibiotics, and implant retention (DAIR) procedure and outcomes for hip and knee periprosthetic joint infection (PJI).

Patients with cancer and bone metastases can have an increased risk of fracturing their femur. Treatment is based on the impending fracture risk: patients with a high fracture risk are considered for prophylactic surgery, whereas low fracture risk patients are treated conservatively with radiotherapy to decrease pain. Current clinical guidelines suggest to determine fracture risk based on axial cortical involvement of the lesion on conventional radiographs, but that appears to be difficult. Therefore, we developed a patient-specific finite element (FE) computer model that has shown to be able to predict fracture risk in an experimental setting and in patients. The goal of this study was to determine whether patient-specific finite element (FE) computer models are better at predicting fracture risk for femoral bone metastases compared to clinical assessments based on axial cortical involvement on conventional radiographs, as described in current clinical guidelines.

45 patients (50 affected femurs) affected with predominantly lytic bone metastases who were treated with palliative radiotherapy for pain were included. CT scans were made and patients were followed for six months to determine whether or not they fractured their femur. Non-linear isotropic FE models were created with the patient-specific geometry and bone density obtained from the CT scans. Subsequently, an axial load was simulated on the models mimicking stance. Failure loads normalized for bodyweight (BW) were calculated for each femur. High and low fracture risks were determined using a failure load of 7.5 × BW as a threshold. Experienced assessors measured axial cortical involvement on conventional radiographs. Following clinical guidelines, patients with lesions larger than 30 mm were identified as having a high fracture risk. FE predictions were compared to clinical assessments by means of diagnostic accuracy values (sensitivity, specificity and positive (PPV) and negative predictive values (NPV)).

Seven femurs (14%) fractured during follow-up. Median time to fracture was 8 weeks. FE models were better at predicting fracture risk in comparison to clinical assessments based on axial cortical involvement (sensitivity 100% vs. 86%, specificity 74% vs. 42%, PPV 39% vs. 19%, and NPV 100% vs. 95%, for the FE computer model vs. axial cortical involvement, respectively). We concluded that patient-specific FE computer models improve fracture risk predictions of femoral bone metastases in advanced cancer patients compared to clinical assessments based on axial cortical involvement, which is currently used in clinical guidelines. Therefore, we are initiating a pilot for clinical implementation of the FE model.

Infections are among the main complications connected to implantation of biomedical devices, having high incidence rate and severe outcome. Since their treatment is challenging, prevention must be preferred. For this reason, solutions capable of exerting suitable efficacy while not causing toxicity and/or development of resistant bacterial strains are needed. To address infection, inorganic antibacterial coatings, and in particular silver coatings, have been extensively studied and used in the clinical practice, but some drawbacks have been evidenced, such as scarce adhesion to the substrate, delamination, or scarce control over silver release.

Here, antibacterial nanostructured silver-based thin films are proposed, obtained by a novel plasma-assisted technique, Ionized Jet Deposition (IJD). Coatings are obtained by deposition of metallic silver targets. Films thickness is selected based on previous results aimed at measuring extent and duration of silver release and at evaluating toxicity to host cells (fibroblasts). Here, composition (grazing incidence XRD) and morphology (SEM) of the obtained coatings are characterized for deposition onto different substrates, both metallic and polymeric. For heat sensitive substrates, possible alterations caused by coatings deposition in terms of morphology (SEM) and composition (FT-IR) is assessed. Then, a proof-of-concept study of the capability of these films to inhibit microbial biofilm formation is performed by using two different supports i.e., the Calgary Biofilm Device and the microplates. To the best of the Authors knowledge, this is the first study describing the application of specific anti-biofilm analyses to nanostructured coatings. In particular, anti-biofilm activities are tested against the following pathogenic strains: Escherichia (E.) coli NCTC12923, Staphylococcus (S.) aureus ATCC29213 and S. aureus 86. Among these, the strain 86 is not only pathogen but it also possesses several antibiotic resistance genes, allowing the evaluation of the utilization of nanostructured coatings as an alternative anti-microbial system to face the global threat of antibiotic resistance.

Results indicate that films deposited from silver targets are composed of nanosized aggregates of metallic silver, indicating a perfect transfer of composition from the deposition target to the coatings.

Results obtained here indicate that the films have significant antibacterial and antibiofilm activity. In addition, they prove that the system can be successfully applied for evaluation of coatings antibacterial efficacy for biomedical applications.

Calcium phosphates-based coatings have been widely studied to favour a firm bonding between orthopaedic implants and the host bone. To this aim, thin films (thickness below 1 μm) having high adhesion to the substrate and a nanostructured surface texture are desired, capable of boosting platelet, proteins and cells adhesion. In addition, a tunable composition is required to resemble as closely as possible the composition of mineralized tissues and/or to intentionally substitute ions having possible therapeutic functions. The authors demonstrated nanostructured films having high surface roughness and a composition perfectly resembling the deposition target one can be achieved by Ionized Jet Deposition (IJD). Highly adhesive nanostructured coatings were obtained by depositing bone-apatite like thin films by ablation of deproteinized bovine bone, capable of promoting host cells attachment, proliferation and differentiation. Here, biomimetic films are deposited by IJD, using biogenic and synthetic apatite targets. Since IJD deposition can be carried out without heating the substrate, application on heat sensitive polymeric substrate, i.e. 3D printed porous scaffolds, is investigated.

Biogenic apatite coatings are obtained by deposition of deproteinized bone (bovine, ovine, equine, porcine) and compared to ones of stoichiometry hydroxyapatite (HAp). Coatings composition (FT-IR-ATR, FT-IR microscopy, XRD, EDS) and morphology (SEM, AFM) are tested for deposition onto metallic and 3D-printed polymeric substrates (polyurethane (PU)). Different post-treatment annealing procedures for metallic substrates are compared (350–425°C), to optimize crystallinity. Then, uniformity of substrate coverage and possible damage caused to the polymeric substrate are studied by SEM, DSC and FT-IR microscopy.

Biogenic coatings are composed by carbonated HAp (XRD, FT-IR). Trace ions Na⁺ and Mg²⁺ are transferred from deposition target to coating. All coatings are nanostructured, composed by nano-sized globular aggregates, of which morphology and dimensions depend on the target characteristics. As-deposited coatings are amorphous, but crystallinity can be tuned by post-treatment annealing. A bone-like crystallinity can be achieved for heating at ≥400°C, also depending on duration. When deposited on 3D-printed PU scaffolds, coatings, owing to sub-micrometric thickness, coat them entirely, without altering their fibre shape and porosity.

Obtained biomimetic bone apatite coatings can be deposited onto a variety of metallic and polymeric biomedical devices, thus finding several perspective applications in biomedical field.

Abstract

Aims

The aim of this study was to report the results of three forms of reconstruction for patients with a ditsl tibial bone tumour: an intercalary resection and reconstruction, an osteoarticular reconstruction, and arthrodesis of the ankle.

Introduction

In the United States, cementless femoral fixation remains the dominant mode of fixation for femoral neck fractures, despite strong worldwide registry data that supports cemented fixation. The reason for this discrepancy remains unknown, controversial and often difficult to compare due to multiple variables. The purpose of this study was to evaluate a matched cohort of patients undergoing arthroplasty for femoral neck fractures and assess outcomes of revisions, periprosthetic fractures and mortality.

Introduction

Reverse total shoulder arthroplasty (RTSA) is rapidly being adopted as the standard procedure for a growing number of shoulder arthropathies. Though short-term outcomes are promising, mid- and long-term follow-ups present a number of complications – among them, humeral stem and glenosphere component loosening. Though not the primary complication, previously reported aseptic loosening required revision in 100% of cases. As the number of patients undergoing RTSA increases, especially in the younger population, it is important for surgeons to identify and utilize prostheses with stable long-term fixation. It has previously been shown in the hip and knee literature that implant migration in the first two years following surgery is predictive of later failure due to loosening in the 5=10-year postoperative window. The purpose of this study is to, for the first time, evaluate the pattern and total magnitude of implant migration in reverse shoulder arthroplasty using the gold standard imaging technique radiostereometric analysis (RSA).

Introduction

Reverse total shoulder arthroplasty (RTSA) is a semi-constrained joint replacement with an articulating cobalt-chromium glenosphere and ultra-high molecular weight polyethylene (PE). Because of its limited load bearing, surgeons and implant manufacturers have not elicited the use of highly cross-linked PE in the shoulder, and to date have not considered excessive PE wear in the reverse shoulder a primary concern. As the number of shoulder procedures is expected to grow exponentially in the next decade, however, it is important to evaluate how new designs and bearing materials interact and to have an understanding of what is normal in well-functioning joint replacements. Currently, no in vivo investigation into RTSA PE wear has been conducted, with limited retrieval and simulation studies. In vitro and in silico studies demonstrate a large range in expected wear rates, from 14.3 mm³/million cycles (MC) to 126 mm³/MC, with no obvious relationship between wear rate and polyethylene diameter. The purpose of this study is to evaluate, for the first time, both volumetric and linear wear rates in reverse shoulder patients, with a minimum six-year follow-up using stereo radiographic techniques.

Purpose of the study and background

A 2011 Cochrane review concluded that spinal manipulative therapy (SMT) is no better than other interventions for reducing pain and improving function in chronic low back pain (CLBP). Using individual participant data (IPD) from trials has advantages, among others: a more precise estimate of the effect and the potential to identify moderators. Our objective was to assess the effect of SMT in adults with CLBP and to identify relevant moderators.

Introduction

Total shoulder arthroplasty is the fastest growing joint replacement in recent years, with projected compound annual growth rates of 10% for 2016 through 2021 – higher than those of both the hip and knee combined. Reverse total shoulder arthroplasty (RTSA) has gained particular interest as a solution for patients with irreparable massive rotator cuff tears and failed conventional shoulder replacement, for whom no satisfactory intervention previously existed. As the number of indications for RTSA continues to grow, so do implant designs, configurations, and fixation techniques. It has previously been shown that continuous implant migration within the first two years postoperatively is predictive of later loosening and failure in the hip and knee, with aseptic loosening of implant components a guaranteed cause for revision in the reverse shoulder. By identifying implants with a tendency to migrate, they can be eliminated from clinical practice prior to widespread use. The purpose of this study is to, for the first time, evaluate the pattern and magnitude of implant component migration in RTSA using the gold standard imaging technique radiostereometric analysis (RSA).

Aim

There is a theoretical advantage for immediate postoperative start of rifampicin after debridement, antibiotics and implant retention (DAIR). Anti-biofilm treatment may be mostly needed during the first postoperative days in order to prevent new biofilm formation. However, there are concerns with regard to development of rifampicin resistance if rifampicin is started too early. Rifampicin monotherapy will rapidly result in rifampicin resistance, but this may not occur when prescribed as part of combination antimicrobial therapy and after thorough surgical debridement. We hypothesized that in this setting the probability of development of rifampicin resistance is very low. We evaluated the frequency of development of rifampicin resistance in patients with acute staphylococcal PJI who were treated with DAIR followed by immediate postoperative start of rifampicin in combination with a betalactam or glycopeptide.

Aim

Early discharge of patients after joint arthroplasty leaves patients responsible for monitoring their postoperative wound by themselves. This might result in a delayed presentation of postoperative complications. The use of a mobile woundcare app by patients after arthroplasty might result in (1) earlier report of complications, (2) an increase in patient satisfaction and (3) insight in the incidence and duration of postoperative wound leakage. Therefore, the ease of use and perceived usefulness of using a postoperative mobile woundcare app in patients after joint arthroplasty was investigated.

Osteoarthritis (OA) is a leading cause of joint deformity and functional limitation. An imbalance of anabolic and catabolic activity results in destruction of the extracellular matrix of articular cartilage. There is evidence to support the role of DNA methylation in the pathogenesis of OA, but the effect of other epigenetic modifiers is yet to be described. This study looks at the effect of novel epigenetic modulators, PFI-1, a bromodomain inhibitor, and SGC707, a histone methytransferase inhibitor, and their effects on gene expression in the pathogenesis of OA. Chondrocytes were extracted from OA femoral heads (n=6), cultured and incubated. Samples were treated with media alone (control), interleukin 1-beta (IL-1β) plus oncostatin M (OSM) alone, or in combination with increasing concentrations of PFI-1 or SGC707. Levels of expression of iNOS, COX2, IL8, IL1B, matrix metalloproteinase-13 (MMP13), RUNX2 and COL9A1 were measured using qRT-PCR, and expressed relative to GAPDH. PFI-1 (0.5 and 5µM) suppressed expression of catabolic genes in OA chondrocytes, at basal levels and when co-stimulated with IL-1β+OSM. Catabolic gene expression decreased (iNOS, COX2, IL-8, IL-1β and MMP), and RUNX2 expression was also supressed. There was no effect on expression of the anabolic gene COL9A1. SGC707 (0.1 and 1µM) did not induce a reduction in expression of all the catabolic genes. This study has demonstrated that PFI-1 has a potent protective effect against cartilage degradation, by modulating the expression of catabolic genes in OA chondrocytes. This further validates the role of epigenetics in OA, with implications for therapeutic interventions in the future.

INTRODUCTION

The goal of the study was to perform quality control with a commercially available navigation system when introducing PST technique at our academic department. The learning curve was assessed by the Cumulative Sum (CUSUM) test. We hypothesized that the PST process for TKA was immediately under control after its introduction when analyzed with the CUSUM technique.

INTRODUCTION

The patient-specific templates (PST) for total knee arthroplasty (TKA) have been developed to improve accuracy of implantation, decrease operating time and decrease costs. There remains controversy about the accuracy of PST in comparison with either navigated or conventional instruments. Furthermore, the learning curve after introducing PST has not been well defined. The goal of the present study was to perform quality control with a commercially available navigation system and the CUCUM test when introducing PST technique at our academic department.