In this study we present our experience with four generations of uncemented total knee arthroplasty (TKA) from Smith & Nephew: Tricon M, Tricon LS, Tricon II and Profix, focusing on the failure rates correlating with each design change. Beginning in 1984, 380 Tricon M, 435 Tricon LS, 305 Tricon 2 and 588 Profix were implanted by the senior author. The rate of revision for loosening was 1.1% for the Tricon M, 1.1% for the Tricon LS, 0.5% for the Tricon 2 with a HA coated tibial component, and 1.3% for the Profix TKA. No loosening of the femoral component was seen with the Tricon M, Tricon LS or Tricon 2, with no loosening seen of the tibial component with the Profix TKA. Regarding revision for wear, the incidence was 13.1% for the Tricon M, 6.6% for the Tricon LS, 2.3% for the Tricon 2, and 0% for the Profix. These results demonstrate that improvements in the design of uncemented components, including increased polyethylene thickness, improved polyethylene quality, and the introduction of hydroxyapatite coating, has improved the outcomes of uncemented TKA over time.

A moderator and panel of five experts led an interactive session in discussing five challenging and interesting patient case presentations involving surgery of the hip. The hip pathologies reviewed included failed open reduction internal fixation of subcapital femoral neck fracture, bilateral hip disease, evaluation of pain after metal-on-metal hip arthroplasty, avascular necrosis, aseptic loosening secondary to osteolysis and polyethylene wear, and management of ceramic femoral head fracture.

Introduction: Architectural changes in the proximal femur after THA continue to be a problem. In an attempted, to reduce these changes some surgeon designers have advocated the concept of neck sparing stem designs.

To-date neck-sparing stems have been disappointing in their ability to maintain the calcar. A new approach was undertaken to improve load transfer and to create a tissue-sparing stem that would be simple in design, reproducible in technique and provide for fine-tuning joint mechanics while maintaining compressive loads to the calcar.

Methods: Review of previous published work was evaluated along with FEA modeling in creating a new approach to neck sparing stems for THA. The MSA^™ Stem is a simple curved stem with a unique lateral T-back designed for torsional stability, ease of preparation and insertion. The proximal design has a novel proximal conical shape designed to transfer compressive forces to the calcar.

A modular neck provides for fine-tuning joint mechanics.

Results: FEA modeling will be reviewed. Strain patterns for the MSA^™ stem demonstrated better patterns vs. long stems or the short Biodynamic stem.

Discussion: In theory neck retaining devices provide or:

Bone and Tissue sparring

We are encouraged and believe there are advantages in the concept of neck sparing stems. Clinical/surgical evaluation is now underway and will be reported on in the future.

Introduction: Cemented stems are still widely used in THA; however, there remain concerns with hip dislocation and wear debris. Restoring joint mechanics is essential for soft tissue balance and reduction of mechanical impingement. These concerns have lead to the development of a modular neck for cemented THA.

Material and methods: 200 R-120™ cemented stems were implanted in 190 patients since 2001. The shape of the stem is trapezoidal with a large collar that provides for impaction and compression of the cement. The stem collar is made with a cavity where a self-locking taper and a positive indexing mechanism provide 12 different positions to ensure proper restoration of joint mechanics.

One to five years follow up with a mean of 2.8 years. Two-thirds were female and one- third male. Age ranged from 39 to 87 with a mean of 73. Majority was treated for OA. A c.c. head (28mm or 32mm) and poly bearing in a cementless cup were used for all patients. Selection of neck position was recorded for all patients.

Results: 635 of all head-neck positions were other than neutral. There were 0 dislocations, no significant leg length discrepancies (+/− 5mm), and 0 infections. There was one stem removed due to a post-op peri-prosthetic fracture at 3 years that was treated with a long cement-less stem. 1 death due to a PE ten days post-op. 1 intra-operative calcar fracture wired and healed uneventfully. 1 intra-op greater trochanter fracture that was treated with screws. 2 neck fractures revised to cementless stems.

Conclusions: Modular neck design aids in fine tuning joint mechanics after stem insertion, and allows for ease and access in case of revisions. This modular neck design has eliminated (to date) hip dislocations and we remain optimistic about its long-term potential to improve outcomes. Fatigue properties have been significantly improved and no additional neck fractures have occurred.

The management of osteoarthritis of the knee associated with patellar instability secondary to external tibial torsion > 45° is challenging. Patellofemoral biomechanics in these patients cannot be achieved by intra-articular correction using standard techniques of total knee replacement.

We reviewed seven patients (eight knees) with recurrent patellar dislocation and one with bilateral irreducible lateral dislocation who had undergone simultaneous total knee replacement and internal tibial derotational osteotomy. All had osteoarthritis and severe external tibial torsion. The mean follow-up was for 47.2 months (24 to 120).

The mean objective and functional Knee Society scores improved significantly (p = 0.0001) from 29.7 and 41.5 pre-operatively to 71.4 and 73.5 post-operatively, respectively. In all patients the osteotomies healed and patellar stability was restored.

Excessive external tibial torsion should be identified and corrected in patients with osteoarthritis and patellar instability. Simultaneous internal rotation osteotomy of the tibia and total knee replacement is a technically demanding but effective treatment for such patients.

1. Thirty-nine patients with synovial sarcoma have been reviewed.

2. The average rate of five-year survival was 45 per cent; of ten-year survival, 30 per cent; and of survival for more than ten years, 10 per cent.

3. The only important factor influencing the long-term results was the method of treatment; primary amputation was by far the best.