Adult reconstructive orthopedic surgery in the United States is facing an imminent logjam due to the increasing divergence of the demand for services and the ability for the community to supply those services. In combination with several other factors, a perfect storm is brewing that may leave the system overtaxed and the patient population suffering from either a lack of treatment, or treatment by less qualified providers. A key component to improving the overall efficiency of surgical care is to introduce enabling technologies that can effectively increase the throughput while simultaneously improving the quality of care. One such enabling technology that has proven itself in many industries is robotics, which has recently been introduced in surgery with even more recent applications in orthopedic surgery. A surgeon interactive robotic arm has been developed for partial knee arthroplasty (PKA) and total hip arthroplasty (THA). This study aims to analyse the efficiency of a new robotic technology for use in orthopaedic surgery. 18 robotic arm assisted PKA's across 10 sites were recorded to accurately capture the timeline elemental tasks throughout the procedure. Two camera angles were set up to capture both surgical staff group dynamics and individual procedural steps. 17 tasks were identified and measured from video data. (Fig 1) The robotic arm specific tasks were analyzed for correlation to total surgical time (measured as first incision to last suture). The tasks for the surgeons with the shortest and longest total times were compared directly to determine areas of opportunity.INTRODUCTION
METHODS
Total hip arthroplasty (THA) is regarded as one of the most successful surgeries in medicine. However, recent studies have revealed that ideal acetabular cup implantation is achieved less frequently than previously thought, as little as 50% of the time. It is well known that malalignment of the acetabular component in THA may result in dislocation, reduced range of motion, or accelerated wear. This study reports accuracy of a tactile robotic arm system to ream the acetabulum and impact an acetabulur cup compared to manual instrumentation. 12 fresh frozen cadaveric acetabulae were pre-operatively CT scanned and 3D templating was used to plan the center of rotation, and anteversion and inclination of the cup. Each specimen received THA, six prepared manually and six prepared with robotic arm guidance. Tactile, visual, and auditory feedback was provided through robotic guidance as well as navigated guided reaming and cup impaction. The robotic guidance constrained orientation of instruments thus constraining anteversion, inclination, and center of rotation for reaming, trialing, and final cup impaction. Post-operative CT scans were taken of each specimen to determine final cup placement for comparison to the pre-operative plans.INTRODUCTION
METHODS
Unicompartmental knee arthroplasty (UKA) was first described over 30 years ago and allows replacement of a single compartment in patients who have isolated osteoarthritis.1 However, UKA is more technically challenging than total knee arthroplasty due to limited exposure as a minimally invasive procedure. In addition to component alignment and fixation, ligament balancing plays an important role in implant survival.2 Some failures of early UKA systems were attributed to a failure to adequately balance the knee. The development of robots to aid in performing the procedure has lead to renewed interest in this surgical technique. The use of a robot-assisted system allows the orthopaedic surgeon to verify that balancing sought pre-operatively correlates with that obtained at surgery. Some studies have shown good post-operative mechanical alignment utilizing this method.3 The aim of this study was to examine the variation in pre-operative templated ligament balance and that obtained during the operation. Data were prospectively collected on 52 patients (51 knees) undergoing robot-assisted unicompartmental knee arthroplasty by a single surgeon. For pre-operative planning, dynamic ligament balancing was obtained of the operative knee under valgus stress, prior to any bony cuts. Final intra-operative images with the prosthesis in place were taken without valgus stress. Positive values denoted loose ligamentous balancing while negative values indicated ligament tightness.Introduction
Methods
