Cement-induced thermal osteonecrosis is well documented, as is the potential for nerve injury from thermal energy. Cement is often used to augment fixation following excision of humeral metastases. Porcine femurs were used as a model. We sought to find out the maximum temperatures that would be reached in various parts of the bone during the cement setting process, to explore what negative effects this might have on neighbouring bone and nerve. A 12mm by 12mm window was cut from 12 porcine femoral shafts, and Palacos R+D cement injected into the defect. As cement set, bone surface temperature was measured using infra-red thermal imaging and thermocouples used to measure temperatures at the bone-cement interface, 5mm from the cement bolus, 10mm from cement bolus and an area running around the shaft replicating radial nerve. Bone surface temperature rose to a maximum of 34.0 C (on average), and 32.9 C in the ‘radial nerve’ thermocouple. Notably, in two bones there were fractures during specimen preparation, and maximum temperatures in these two areas exceeded 41 degrees C. Average maximum temperatures were 58.1 C, 36.5 C and 30.1 C at the bone cement interface, 5mm and 10mm from the cement bolus respectively.
Cement-in-cement femoral component revision is a useful and commonly practised technique. Onerous and hazardous re-shaping of the original cement mantle is required if the new stem does not seat easily. Furthermore, without removing the entirety of the original cement mantle, the freedom to alter anteversion or leg length is difficult to predict preoperatively. We present data from in vitro experiments testing the compatibility of the top cemented stems according to UK registry figures (NJR 2013). This data augments preoperative planning by indicating which revision stems require minimal or no cement reshaping when being inserted into another stem's mantle. We also present the maximum shortening and anteversion that can be achieved without reshaping the original cement mantle.
In September 2011 our departmental protocol for peri-operative prophylactic antibiotic administration was altered from cefuroxime to gentamicin/flucloxacillin, in response to reported links between cephalosporin use and Clostridium difficile (C. diff) infection. As both gentamicin and flucloxacillin are known to be nephrotoxic in some patients, we investigated whether the new regimen increases the risk of Acute Kidney Injury (AKI) in patients undergoing elective and trauma hip and knee surgery, classified by severity (AKI Network criteria). The incidence of C. diff was noted. 10 out of 202 (5%) patients receiving cefuroxime (group A) developed AKI, compared with 23 of 210 (11%) patients receiving gentamicin and flucloxacillin (group B) (p=0.012). The severity of the renal injury was higher in the group B patients with 16 sustaining stage II/III AKI, whereas in Group A only one patient sustained a stage II injury and none stage III. The increased AKI rate in group B was observed equally in hip fracture patients and elective hip/knee replacement patients. However, 3 of 80 (4%) patients with hip fractures who received doses of cefuroxime developed C. diff, with none in the other groups (p=0.04). The choice of prophylactic antibiotics depends on a careful assessment of benefits and risks. Our data suggests that whereas hip fracture patients may have benefitted from the protocol change with reduced C. diff incidence, elective hip and knee replacement patients sustained additional harm. Different antibiotic regimens may be appropriate for these two groups.
Total Shoulder Resurfacing (TSR) provides a reliable solution for the treatment of glenohumeral arthritis. It confers a number of advantages over traditional joint replacement with stemmed humeral components, in terms of bone preservation and improved joint kinematics. This study aimed to determine if humeral reaming instruments produce a thermal insult to subchondral bone during TSR. This was tested in vivo on 13 patients (8 with rheumatoid arthritis and 5 with osteoarthritis) with a single reaming system and in vitro with three different humeral reaming systems on saw bone models. Real-time infrared thermal video imaging was used to assess the temperatures generated. Synthes Epoca instruments generated average temperatures of 40.7°C (SD 0.9°C) in the rheumatoid group and 56.5°C (SD 0.87°C) in the osteoarthritis group (p = 0.001). Irrigation with room temperature saline cooled the humeral head to 30°C (SD 1.2°C). Saw bone analysis generated temperatures of 58.2°C (SD 0.79°C) in the Synthes (Epoca) 59.9°C (SD 0.81°C) in Biomet (Copeland) and 58.4°C (SD 0.88°C) in the Depuy (CAP) reamers (p=0.12). Humeral reaming with power driven instruments generates considerable temperatures both in vivo and in vitro. This paper demonstrates that a significant thermal effect beyond the 47°C threshold needed to induce osteonecrosis is observed with humeral reamers, with little variation seen between manufacturers. Irrigation with room temperature saline cools the reamed bone to physiological levels, and should be performed regularly during this step in TSR.
There is controversy regarding the optimum method of stabilising traumatic anterior pelvic ring injuries. This study aimed to evaluate the role of pubic symphysis plating. All patients who underwent pubic symphysis plating in a regional pelvic and acetabular unit were studied. Fracture classification, type of fixation, complications, and incidence of metalwork failure were recorded. Out of 178 consecutive patients, 159 (89%) were studied for a mean of 37.6 months. There were 121 males and 38 females (mean age 43 years). Symphysis pubic fixation was performed in 100 AO-OTA type B and 59 type C injuries using a Matta symphyseal plate (n=92), reconstruction plate (n=65), or DCP (n=2). Supplementary posterior pelvic fixation was performed in 102 patients. 5 patients required revision for failure of fixation or symptomatic instability of the pubic symphysis. A further 7 patients had metalwork removed for other reasons. Metalwork breakage occurred in 63 patients (40%). 62 of these 63 patients were asymptomatic and metalwork was left in situ.Methods
Results
Long-term prospective RCT comparing hemiarthroplasty (HEMI) and total hip arthroplasty (THA) for the treatment of intracapsular neck of femur fracture. 81 previously mobile, independent, orientated patients were randomised to receive THA or HEMI after sustaining a displaced neck of femur fracture. Patients were followed up with radiographs, Oxford hip score (OHS), SF-36 scores and their walking distance. At a mean follow up of 8.7 years, overall mortality following THA was 32.5% compared to 51.2% following HEMI (p=0.09). Following THA, patients died after a mean of 63.6 months compared to 45 months following HEMI (p=0.093). Patients with THA walked further and had better physical function. No HEMIs dislocated but three (7.5%) THAs did. Four (9.8%) HEMI patients were revised to THA, but only one (2.5%) THA required revision. All surviving HEMI patients had acetabular erosion and all surviving THA patients had wear of the cemented polyethylene cup. Patients with THA have better function in the medium-term and survive longer.
Metal-on-metal resurfacing offers an alternative strategy to hip replacement in the young active patient with severe osteoarthritis of the hip. The aim of this study was to compare functional outcomes, failure rates and impending revisions in hybrid total hip arthroplasties (THAs) and Birmingham Hip Resurfacings (BHRs) in young active patients. We compared the 5-7 year clinical and radiological results of the metal-on-metal BHR with hybrid THA in two groups of 54 hips each, matched for sex, age, body mass index and activity. Function was excellent in both groups as measured by the Oxford hip score (median 13 in the BHRs and 14 in the THAs, p=0.14), but the resurfacings had higher UCLA activity scores (median 9 v 7, p=0.001) and better EuroQol quality of life scores (0.90 v 0.78, p=0.003). The THAs had a revision or intention to revise rate of 8% and the BHRs 6%. Both groups demonstrated impending failure on surrogate end-points. 12% of THAs had polyethylene wear and osteolysis under observation, and there was femoral component migration in 8% of resurfacings. Polyethylene wear was present in 48% of hybrid hips without osteolysis. Of the femoral components in the resurfacing group which had not migrated, 66% had radiological changes of unknown significance (classification proposed). In conclusion, the early to mid-term results of resurfacing with the BHR appear at least as good as those of hybrid THA. Only by longer term follow-up will we establish whether the change of practice recorded here represents a true advance.
