Introduction. Unstable dorsal fracture/dislocation of PIP joint is a complex injury and difficult to treat. Different treatment methods have been described with varying results. We describe a novel technique to combine fracture fixation with volar plate repair using micro anchor suture. Material and methods. Between July and December 2005, 11 consecutive patients with unstable dorsal PIP joint dislocations underwent open reduction and volar plate repair using our technique. Nine patients had dorsal fracture dislocations and two had open dislocations. All patients were males and their average age was 26 years. All patients were reviewed with the minimum follow up of 12 months. The pain score, range of movements and grip strength were recorded and compared to the normal side. Operative Technique. Volar approach was made using a semi Brunar incision. One or two micro bioabsorbable anchors (Mitek, Ethicon Ltd, UK) were used to stabilise the joint and repair the volar plate. Additional anchor was used to repair the collateral ligament when indicated. Post-operatively the hand was rested in Edinburgh functional splint for 10 days followed by active and assisted range of movements under hand physiotherapist supervision. Results. 10 out 11 patients had excellent pain relief. The average range of movement of the PIP joint was 100 degrees. One patient with neglected PIP joint fracture dislocation for 10 weeks had mild residual pain and stiffness. The mean grip strength was 87% of that of contralateral normal side. All patients returned to their same work as before. 8 out of 9 patients returned to play their regular sports at the same level. All patients were satisfied with the functional outcome. Conclusion. Combined fracture fixation and volar plate repair through anterior approach using micro bioabsorbable anchors appears to be very effective way of treating this otherwise complex unstable fracture/dislocation of PIP joint

Techniques for fixation of the lateral malleolus have remained essentially unchanged since the 1960s, but are associated with complication rates of up to 30%. The fibular nail is an alternative method of fixation requiring a minimal incision and tissue dissection, and has the potential to reduce complications. We reviewed the results of 105 patients with unstable fractures of the ankle that were fixed between 2002 and 2010 using the Acumed fibular nail. The mean age of the patients was 64.8 years (22 to 95), and 80 (76%) had significant systemic medical comorbidities. Various different configurations of locking screw were assessed over the study period as experience was gained with the device. Nailing without the use of locking screws gave satisfactory stability in only 66% of cases (4 of 6). Initial locking screw constructs rendered between 91% (10 of 11) and 96% (23 of 24) of ankles stable. Overall, seven patients had loss of fixation of the fracture and there were five post-operative wound infections related to the distal fibula. This lead to the development of the current technique with a screw across the syndesmosis in addition to a distal locking screw. In 21 patients treated with this technique there have been no significant complications and only one superficial wound infection. Good fracture reduction was achieved in all of these patients. The mean physical component Short-Form 12, Olerud and Molander score, and AAOS Foot and Ankle outcome scores at a mean of six years post-injury were 46 (28 to 61), 65 (35 to 100) and 83 (52 to 99), respectively. There have been no cases of fibular nonunion. Nailing of the fibula using our current technique gives good radiological and functional outcomes with minimal complications, and should be considered in the management of patients with an unstable ankle fracture

Sacral fractures are often underdiagnosed, but are frequent in the setting of pelvic ring injuries. They are mostly caused by high velocity injuries or they can be pathological in aetiology. We sought to assess the clinical outcomes of the surgically treated unstable sacral fractures, with or without neurological deficits. unstable sacral fractures were included in the study. Single centre, prospectively collected data, retrospective review of patients who sustained vertically unstable fractures of the sacrum who underwent surgical fixation. out of a total of 432 patients with pelvis and acetabulum injuries. fifty six patients met the inclusion criteria. 18 patients had sustained zone one injuries. 14 patients had zone 2 injuries and 10 patients had zone 3 injurie. Operative fixation was performed percutaneously using cannulated screws in 18 patients.. Open fixation of the sacrum using the anterior approach in 6 patients. Posterior approach was indicates in all 10 of the zone 3 injuries of the sacrum. While in 4 patients, combined approaches were used. 3 patients had decompression and spinopelvic fixation. Neurological deficits were present in 16% of the patients. 2 patients presented with neurgenic bladder. Of the 4 patients who had neurological fall out, 3 resolved with posterior decompression and posterior fixation. All 4 neurological deficits were due to taction or compression of the nerve roots. No hardware failures or non unions observed. The rate of neurological deficit was related more to the degree of pelvic ring instability than to a particular fracture pattern. Low rates of complications and successful surgical treatment of sacral fractures is achiavable. Timeous accurate diagnosis mandatory

The purpose of this study was to investigate the effectiveness of casting in achieving acceptable radiological parameters for unstable ankle injuries. This retrospective observational cohort study was conducted involving the retrieval of X-rays of all ankles taken over a 2 year period in an urban setting to investigate the radiological outcomes of cast management for unstable ankle fractures using four acceptable parameters measured on a single X- ray at union. The Picture Archiving and Communication System (PACS) was used, the X-rays were measured by a single observer. From the 1st of January 2020 to the 31st of December 2021, a total of 1043 ankle fractures were treated at the three hospitals with a male to female ratio of 1:1.7. Of the 628 unstable ankle injuries, 19% of patients were lost to follow up. 190 were managed conservatively with casts, requiring an average of 4 manipulations, with a malunion rate of 23.2%. Unstable ankle injuries that were treated surgically from the outset and those who failed conservative management and subsequently converted to surgery had a malunion rate of 8.1% and 11.0% respectively. Unstable ankle fractures pose a challenge with a high rate of radiological malunion, regardless of the treatment Casting surgery from the outset or converted to surgery, with rates of 23% and 8% and 11% respectively. In this multivariate analysis we found that conservative management was the only factor influencing the incidence of malunion, age, sex and type of fracture did not have a scientific significant influence

The purpose of this study was to determine whether there have been changes in the complexity of femoral fragility fractures presenting to our Dunedin Orthopaedic Department, New Zealand, over a period of ten years. Patients over the age of 60 presenting with femoral fragility fractures to Dunedin Hospital in 2009 −10 (335 fractures) were compared with respect to demographic data, incidence rates, fracture classification and treatment details to the period 2018-19 (311 fractures). Pathological and high velocity fractures were excluded. The gender proportion and average age (83.1 vs 83.0 years) was unchanged. The overall incidence of femoral fractures in people over 60 years in our region fell by 27% (p<0.001). Intracapsular fractures (31 B1 and B2) fell by 29% (p=0.03) and stable trochanteric fractures by 56% (p<0.001). The incidence of unstable trochanteric fractures (31A2 and 31A3) increased by 84.5% from 3.5 to 6.4/10,000 over 60 years (p = 0.04). The proportion of trochanteric fractures treated with an intramedullary (IM) nail increased from 8% to 37% (p <0.001). Fewer intracapsular fractures were treated by internal fixation (p<0.001) and the rate of acute total hip joint replacements increased from 13 to 21% (p=0.07). The incidence of femoral shaft fractures did not change significantly with periprosthetic fractures comprising 70% in both cohorts. While there has been little difference in the numbers there has been a decrease in the incidence of femoral fragility fractures likely due to the increasing use of bisphosphonates. However, the incidence of unstable trochanteric fractures is increasing. This has led to the increased use of IM nails which are increasingly used for stable fractures as well. The increasing complexity of femoral fragility fractures is likely to have an impact on implant use, theatre time and cost

Neer Type-IIB lateral clavicle fractures are inherently unstable fractures with associated disruption of the coracoclavicular (CC) ligaments. A novel plating technique using a superior lateral locking plate with antero-posterior (AP) locking screws, resulting in orthogonal fixation in the lateral fragment has been designed to enhance stability. The purpose of this study was to biomechanically compare three different clavicle plating constructs. 24 fresh-frozen cadaveric shoulders were randomised into three groups (n=8 specimens). Group 1: lateral locking plate only (Medartis Aptus Superior Lateral Plate); Group 2: lateral locking plate with CC stabilisation (Nr. 2 FiberWire); and Group 3: lateral locking plate with two AP locking screws stabilising the lateral fragment. Data was analysed for gap formation after cyclic loading, construct stiffness and ultimate load to failure, defined by a marked decrease in the load displacement curve. After 500 cycles, there was no statistically significant difference between the three groups in gap-formation (p = 0.179). Ultimate load to failure was significantly higher in Group 3 compared to Group 1 (286N vs. 167N; p = 0.022), but not to Group 2 (286N vs. 246N; p = 0.604). There were no statistically significant differences in stiffness (Group 1: 504N/mm; Group 2: 564N/mm; Group 3: 512N/mm; p = 0.712). Peri-implant fracture was the primary mode of failure for all three groups, with Group 3 demonstrating the lowest rate of peri-implant fractures (Group 1: 6/8; Group 2: 7/8, Group 3: 4/8; p = 0.243). The lateral locking plate with orthogonal AP locking screw fixation in the lateral fragment demonstrated the greatest ultimate failure load, followed by the lateral locking plate with CC stabilization. The use of orthogonal screw fixation in the distal fragment may negate against the need for CC stabilization in these types of fractures, thus minimizing surgical dissection around the coracoid and potential complications

A prospective, randomized, controlled trial was performed to compare the outcome of treatment of unstable fractures of the proximal part of the femur with either a sliding hip screw or a short proximal femoral nail antirotation (PFNA-XS, Synthes). Eighty one patients (April 2007 – May 2008) presenting with unstable fracture of the proximal part of the femur were randomized, at the time of admission, to fixation with use of either a short proximal femoral nail antirotation (n=42) or a sliding hip screw (n= 39). The primary outcome measure was reoperation within the first postoperative year and mortality at the end of one year. Operative time, fluoroscopy time, blood loss, and any intra-operative complication were recorded for each patient. Follow-up was undertaken at 3, 6, and 12 postoperative months and yearly thereafter. Plain AP and lateral radiographs were obtained at all visits. All changes in the position of the implant, complications, or fixation failure were recorded. Hip range of motion, pain about the hip and the thigh, walking ability score and return to work status were used to compare the outcomes. There was no significant difference between 1 year mortality rates for the two groups. Mean Operative time was significantly less in PFNA group (Mean 25 min, range 19 – 56 min) than DHS group (Mean 38 min, range 28 – 70 min). Patients treated with a PFNA experienced a shorter fluoroscopy time and less blood loss. 6 patients in DHS group had implant failure as compared to none in PFNA group. The functional outcome was also better in PFNA group. When compared to DHS, PFNA-XS provides better functional outcome for unstable trochanteric fractures with less operative time, less blood loss and less complications, however one year mortality rate remains the same

The most common classification of periprosthetic femoral fractures is the Vancouver classification. The classification has been validated by multiple centers. Fractures are distinguished by location, stability of the femoral component, and bone quality. Although postoperative and intraoperative fractures are classified using the same three regions, the treatment algorithm is slightly different. Type A fractures involve the greater and lesser trochanter. Fractures around the stem or just distal to the stem are Type B and subcategorised depending on stem stability and bone quality. Type C fractures are well distal to the stem and are treated independent of the stem with standard fixation techniques. The majority of fractures are either B1 (stable stem) or B2 (unstable stem). The stem is retained and ORIF of the fracture performed for B1 fractures. B2 and B3 fractures require stem revision with primary stem fixation distal to the fracture. Intraoperative fractures use the same A, B, C regions but are subtyped 1–3 as cortical perforations, nondisplaced, and displaced unstable fractures, respectively. With the exception of A1 intraoperative fractures all other intraoperative fractures require surgical treatment. A recent publication utilizing a New York state registry highlighted the patient risk of mortality associated with periprosthetic hip fractures. One month, 6 month and 1 year mortality was 3.2%, 3.8% and 9.7%, respectively. The mortality risk was lower for periprosthetic fractures treated with ORIF at 1 and 6 months compared to fractures requiring revision total hip

Prospective Randomised Control trial of 300 patients over a period of 3 years, 1 year post op follow up. Local ethic approval was attained for the study. Inclusion criteria: Age > 60, Consented to Participate in the study, Unstable Inter trochanteric fracture a) Sub trochanteric b) Medial Comminution c) Reverse Obliquity D)Severe Osteoporosis. Patients selected were randomized to Intra medullary Nail vs Hips screw. Variety of markers have been assessed: Pre OP: - Mechanism of injury, Mobility status, Pre OP ASA, Pre Op haemoglobin, living Conditions. Intra OP:- I.I Time, Time taken, Surgeon experience, Intra OP complications. Post OP:- Haemoglobin, mobility, radiographic analysis-Fracture stability and Tip Apex Distance, Thrombo embolic Complications. Follow up: - 6 weeks, 3,6,12 month follow up. There is considerable debate in literature regarding superiority of Compression Hip screw over Intra medullary nail for fixation of stable per trochanteric fractures of the femur. Biomechanical studies have shown superiority of Intra medullary device over a Compression Hip screw. Tenser et all showed an advantage over combined bending and compression failure. Mohammad et al found unstable subtrochanteric fractures with a gamma nail were stiffer. Kerush-Brinker showed that gamma nail had significantly greater fatigue strength and fatigue life. In unstable fractures Baumgartner et al found less intra op complications and less fluoroscopic time for a compression hip screw compared to a short intra medullary nail. There have been significant reports of fracture at the Tip of a short intra medullary nail. We think this complication can be avoided by using a long intra medullary device. Both in Australia and abroad the choice of which device to use depends largely on the preference of the surgeon

Socially deprived patients face significant barriers that reduce their access to care, presenting unique challenges for orthopaedic surgeons. Few studies have investigated the outcomes of surgical fracture care among those socially deprived, despite the increased incidence of fractures, and the inequality of care received in this group. The purpose of this study was to evaluate whether social deprivation impacted the complications and subsequent management of marginalized/homeless patients following ankle fracture surgery. In this retrospective, population-based cohort study involving 202 hospitals in Ontario, Canada, we evaluated 45,444 patients who underwent open reduction internal fixation for an ankle fracture performed by 710 different surgeons between January 1, 1994, and December 31, 2011. Socioeconomic deprivation was measured for each patient according to their residential location by using the “deprivation” component of the Ontario Marginalization Index (ON-MARG). Multivariable logistic regression models were used to assess the relationship between deprivation and shorter-term outcomes within 1 year (implant removal, repeat ORIF, irrigation and debridement due to infection, and amputation). Multivariable cox proportional hazards (CPH) models were used to assess longer-term outcomes up to 20 years (ankle fusion and ankle arthroplasty). A higher level of deprivation was associated with an increased risk of I&D (quintile 5 vs. quintile 1: odds ratio (OR) 2.14, 95% confidence interval (CI), 1.25–3.67, p = 0.0054) and amputation (quintile 4 vs. quintile 1: OR 3.56, 95% CI 1.01–12.4, p = 0.0466). It was more common for less deprived patients to have their hardware removed compared to more deprived patients (quintile 5 vs. quintile 1: OR 0.822, 95% CI 0.76–0.888, p < 0.0001). There was no correlation between marginalization and subsequent revision ORIF, ankle fusion, or ankle arthroplasty. Marginalized patients are at a significantly increased risk of infection and amputation following operatively treated ankle fractures. However, these complications are still extremely rare among this group. Thus, socioeconomic deprivation should not prohibit marginalized patients from receiving operative management for unstable ankle fractures

Introduction. Failure of intertrochanteric fracture fixation often occurs in patients, who have poor bone quality, severe osteoporosis, or unstable fracture patterns. Hip arthroplasty is a good replacement procedure even though it involves technical issues such as implant removal, bone loss, poor bone quality, trochanteric nonunion and difficulty of surgical exposure. The purpose of this study is to evaluate the outcomes of total hip arthroplasty (THA) as the replacement for failed fixation of intertrochanteric fractures of the femur. Patients and Methods. 203 patients of failed intertrochanteric fractures between April 2009 and October 2014 were included in the study. All of them underwent total hip arthroplasty through direct lateral approach. 150 patients were male (73.8%) and 53 patients (26.1%) were female and the mean of age was 59.02±10.34 years old (range: 56–90 years). The indications of the failure were nail cut out in 174 (85.7%), non-union in 15 (7.3%), plate failure in 14 cases (6.8%). One patient underwent two-stage protocol due to infection. We evaluated the possible clinical and radiological complications and measured functional outcome with modified Harris hip score (MHHS). We used cementless cup in nearly all of patients (95.2%), cementless long stem in 88.1% of patients. Results. We followed patients for the mean time of 4.43±1.11 years (range 3–5 years). The mean (MHHS) was improved from 45.32±12.41 (range 40–49) to 89.37±7.41 (range 85–98) significantly (P=0.002). There was no infection, no reoperation, no dislocation, no nerve palsy, no avascular necrosis, no pulmonary embolism (PTE) and deep vein thrombosis (DVT). There was only one intra-operative fracture which was treated. All patients were ambulatory at the final follow up. There were no significant differences in hospital stay, operating time, and transfusion volume between the 2 groups (P>0.05). Conclusions. We showed in a large population study that functional outcome can be achieved by hip arthroplasty excellently in elderly patients with failed intertrochanteric fractures. Though technically demanding, properly performed hip arthroplasty can be a good replacement option for this patient group

Proximal humeral fractures occur frequently, with fixed angle locking plates often being used for their treatment. However, the failure rate of this fixation is high, ranging between 10 and 35%. Numerous variables are thought to affect the performance of the fixation used, including the length and configuration of screws used and the plate position. However, there is currently limited quantitative evidence to support concepts for optimal fixation. The variations in surgical techniques and human anatomy make biomechanical testing prohibitive for such investigations. Therefore, a finite element osteosynthesis test kit has been developed and validated - SystemFix. The aim of this study was to quantify the effect of variations in screw length, configuration and plate position on predicted failure risk of PHILOS plate fixation for unstable proximal humerus fractures using the test kit. Twenty-six low-density humerus models were selected and osteotomized to create a malreduced unstable three-part fracture AO/OTA 11-B3.2 with medial comminution which was virtually fixed with the PHILOS plate. In turn, four different screw lengths, twelve different screw configurations and five plate positions were simulated. Each time, three physiological loading cases were modelled, with an established finite element analysis methodology utilized to evaluate average peri-screw bone strain, this measure has been previously demonstrated to predict experimental fatigue fixation failure. All three core variables lead to significant differences in peri-screw strain magnitudes, i.e. predicted failure risk. With screw length, shortening of 4 mm in all screw lengths (the distance of the screw tips to the joint surface increasing from 4 mm to 8 mm) significantly (p < 0 .001) increased the risk of failure. In the lowest density bone, every additional screw reduced failure risk compared to the four-screw construct, whereas in more dense bone, once the sixth screw was inserted, no further significant benefit was seen (p=0.40). Screw configurations not including calcar screws, also demonstrated significant (p < 0 .001) increased risk of failure. Finally, more proximal plate positioning, compared to the suggested operative technique, was associated with reduced the predicted failure risk, especially in constructs using calcar screws, and distal positioning increased failure risk. Optimal fixation constructs were found when placing screws 4 mm from the joint surface, in configurations including calcar screws, in plates located more proximally, as these factors were associated with the greatest reduction in predicted fixation failure in 3-part unstable proximal humeral fractures. These results may help to provide practical recommendations on the implant usage for improved primary implant stability and may lead to better healing outcomes for osteoporotic proximal fracture patients. Whilst prospective clinical confirmation is required, using this validated computational tool kit enables the discovery of findings otherwise hidden by the variation and prohibitive costs of appropriately powered biomechanical studies using human samples

Periprosthetic fractures around a TKA typically involve the distal femur above a well-fixed femoral component. ORIF is typically indicated, using a retrograde nail or some form of locked plating. Tibial fractures after TKA are quite rare. In distinction to femoral fractures, fractures around a tibial component are typically associated with a loose prosthesis. Revision is indicated in this situation. Dealing with bone loss with augments, sleeves, cones, or allograft as well as stem bypass is typically necessary. Varus malalignment is often noted in these situations and should be corrected. More distal fractures can be managed with closed treatment if displacement and angulation is acceptable. A period of time in a long leg cast followed by conversion to a short leg or so-called PTB cast can be effective. More unstable fractures can be managed with plating techniques. Percutaneous so called MIPPO techniques can be particularly useful. Modern locking plates allow polyaxial proximal fixation that can be effective around the keels of tibial components. Malalignments are common so careful fluoroscopic scrutiny is necessary when using percutaneous techniques

Purpose of study:. The presence of an L5 transverse process fracture is reported in many texts to be a marker of pelvis fracture instability. There is paucity of literature to support this view. Available studies have been performed on patients who were already known to have a pelvis fracture. No study has attempted to document the presence of this lesion in the absence of a pelvis fracture. Primary aim: To identify the correlation between the presence of a L5 transverse process fracture and an unstable pelvic ring injury. Secondary aim: To establish whether a L5 transverse process fracture can occur in the absence of a pelvis fracture. Methods:. We conducted a retrospective review of all CT scans performed in patients who presented to a Level 1 Trauma Unit for blunt abdomino-pelvic trauma between January 1, 2012 and August 28, 2013. A total of 203 patients met our inclusion criteria. Results:. Fifty four of these 203 patients (26%) sustained a pelvis fracture. Of these 54 patients 26 (48%) had an unstable fracture pattern according to the AO classification. Five of these 26 patients (19%) had an associated L5 transverse process fracture. Seven (12%) had an L5 transverse process fracture associated with a stable fracture pattern. Three patients (1.4%) had an isolated L5 transverse process fracture in the absence of a pelvis fracture. Conclusion:. This study confirms the association between the presence of a L5 transverse process fracture and an unstable pelvis fracture pattern. This injury is rarely seen in the absence of a pelvis fracture so its presence should alert the treating clinicians to the existence of a pelvis fracture

The most important determinant in the treatment of malleolar fractures is stability. Stable fractures have an intact deep deltoid ligament and do not displace with functional treatment. If the deep deltoid/medial malleolar complex is disrupted, the talus is at risk of displacement. Weber (2010) showed that weightbearing radiographs predicted stability in patients with undisplaced ankle fractures. We developed clinical criteria for potential instability and applied them to a prospective series of patients. Criteria included: medial clear space of < 4mm; medial tenderness, bruising or swelling; a fibular fracture above the syndesmosis; a bimalleolar or trimalleolar fracture; an open fracture; a high-energy fracture mechanism. A consecutive, prospectively documented series of 37 patients chose functional brace treatment of potentially unstable fractures. Weightbearing radiographs were performed in the brace before treatment, and free of brace at clinical union (6–9 weeks in all patients). Patients were encouraged to bear full weight and actively exercise their ankles in the brace. All fractures healed without displacement. The risk of displacement was 0% (95% CI 0–11.2%). This preliminary series gives support for the use of weightbearing radiographs to guide treatment of undisplaced ankle fractures

Pelvic fractures in children are rare and potentially disastrous injuries. Using medical records and radiographs over a three year period from January 2008 to March 2011 at an academic hospital we retrospectively analysed the incidence, the associated data and management of these injuries. Results. During this time period 633 paediatric patients where admitted with trauma related injuries; only 19 had pelvic fractures, an incidence of 0.03%. The majority of these patients (13) were involved in PVA's; while MVA (3), fall from height (1) and sports injuries (1) made up the rest. Males (13) were injured more commonly and the average age of the patients was 9 years (3–14). There is debate of over the ideal paediatric pelvic fracture classification system in the literature. However, 13 pelvic fractures were classified stable; 3 were unstable fractures with disruption of the pelvic ring. In addition 2 iliac wing fractures and 1 avulsion (apophyseal) fracture were found. 58% of the patients had associated injuries, however, only 2 of the 19 had associated abdominal viscus injuries. Neither of these required exploratory laparotomy and were managed conservatively. The treatment of these pelvic fractures in our unit was patient specific and largely conservative. 17 patients' pelvic fractures were treated with bed rest, analgesia and mobilisation as pain allowed while the remaining 2 had pelvic external fixators. No ORIF's were performed. Associated orthopaedic injuries were managed accordingly. The average hospital stay of a patient with a pelvic fracture was 15 days (3–48 days). There were no mortalities during this time period

The aim of this study was to establish any association between implant cut-out and a Tip Apex Distance (TAD), ≥25mm, in proximal femoral fractures, following closed reduction and stabilisation, with either a Dynamic Hip Screw (DHS) or Intramedullary Hip Screw (IMHS) device. Furthermore, we investigated whether any difference in cut-out rate was related to fracture configuration or implant type. WE conducted a retrospective review of the full clinical records and radiographs of 65 consecutive patients, who underwent either DHS or IMHS fixation of proximal femoral fractures. The TAD was measured in the standard fashion using the combined measured AP and lateral radiograph distances. Fractures were classified according to the Muller AO classification. 35 patients underwent DHS fixation and 30 patients had IMHS fixation. 5 in each group had a TAD≥25mm. There were no cut-outs in the DHS group and 3 in the IMHS group. 2 of the cut-outs had a TAD≥25mm. The 3 cut-outs in the IMHS group had a fracture classification of 31-A2, 31-A3 and 32-A3.1 respectively. In addition, the fractures were inadequately reduced and fixed into a varus position. A TAD<25mm would appear to be associated with a lower rate of cut-out. The cut-out rate in the IMHS group was higher than the DHS group. Contributing factors may have included an unstable fracture configuration and inadequate closed fracture reduction at the time of surgery

Introduction. To investigate if the gap index measured in the follow-up X-rays predicts the reduction of swelling in the plaster cast thereby increasing the risk of re-displacement of fracture treated by manipulation alone. Materials/Methods. We selected for this study a cohort of children who presented with a traumatic displaced fracture of distal radius at the junction of metaphysis and diaphysis who were treated with manipulation alone. This cohort was chosen because of the high risk of re-displacement following closed manipulation of this unstable fracture and to maintain uniformity of the fracture type. Cast index and Gap index was measured in the intra-operative radiograph and at two-weeks to note the change in these indices. Gap index which is measured by summing radial and ulnar translation/inner diameter of cast in the AP X-ray and similar translation on the lateral x-ray/inner diameter of cast, with a measure of <0.15 considered to be a satisfactory cast. Results. Forty-one children with a mean age of 9 years (mode-8, range 4–15 yrs) admitted between Jan 2008 and Feb 2010 with the above described fracture and were treated with manipulation alone were included in this study. Serial radiographs show a gradual loss of reduction in 34 (83%) children and 17 (41%) of these children required re-manipulation. As the plaster cast was not changed the cast index remained same while the gap index increased in the follow-up x-rays as the swelling subsided. In those children whose reduction remained satisfactory, the initial gap index was 0.14 which changed to 0.18 (n=7, p>0.05) while in children in whom the fracture lost reduction, the initial gap index was 0.18 and changed to 0.25 (n=34, p=0.0092) at two weeks. Conclusion. Gap index can easily be calculated on follow-up radiographs and can be used to assess the adequacy of plaster cast. From this study we can conclude that it is effective in assessing the adequacy of plaster cast as the swelling subsides

Introduction. Lag screw cut-out following fixation of unstable intertrochanteric fractures in osteoporotic bone remains an unsolved challenge. A novel new device is the X-Bolt which is an expanding type bolt that may offer superior fixation in osteoporotic bone compared to the standard DHS screw type device. Aims. The aim of this study was to test if there was a difference in cut-out using the X-Bolt implant compared with the standard DHS system. Methods. Specimens of low density surrogate bone (5pcf) were inserted into a simplified biomechanical fracture model and had either an X-Bolt or DHS implant inserted. There were eight samples in each group. The fracture model was tested with an incremental cyclical loading programme in a Material Test System. Displacement, cycle count and force exerted were continuously recorded until cut-out of the implant. Results. All of the specimens failed by varus collapse with superior cut-out and resulted in an automatic stop of the MTS. Specimens with the X-Bolt implant inserted lasted longer on cyclical count and withstood a greater force at cut-out compared with DHS specimens. The mean number of cycles to cutout in the DHS specimens was 4345 and in specimens with the X-Bolt inserted was 6898. The mean force at which cutout occurred in the DHS group was 1.025kN and in specimens with the X-Bolt inserted was 1.275kN. A statistically significant difference was observed with a P-value of 0.005 and a power of 87.2% with respect to cycle count and a P-value of 0.008 and power 84.8% with respect to force exerted at failure when comparing between the two groups. Conclusion. This study shows that the X-Bolt device demonstrated superior cut-out resistance and withstood greater loads compared to the DHS in low density surrogate bone in an unstable fracture model under cyclical axial loading

Introduction. Early identification and conservative management of paediatric Monteggia fractures has been shown to correlate with good results. Nevertheless, several authors advocate more aggressive management with open reduction and internal fixation (ORIF) for unstable fractures. We herein present the experience of a tertiary paediatric hospital in the management of Monteggia fractures. Methods. 41 patients with Monteggia fractures (26 male and 15 female) were admitted and treated over a period of 20 years (1989 to 2009). The age of the patients ranged between 3 and 14 years (mean 7.5 years). Based on the Bado Classification, 29 fractures were type I, 3 were type II, 8 type III and 1 fracture was classified as type IV. Out of the 41 patients, 32 were managed with manipulation under anaesthesia (MUA) and above elbow plaster, whereas 9 underwent open reduction and internal fixation (ORIF) of the ulna. Results. In order to assess outcomes, the Bruce, Harvey and Wilson scoring system was used. Assessment of range of movement, pain and deformity are evaluated to class an outcome as excellent, good, fair or poor. Patients were followed up for an average of 4.6 years (range 1 to 7). All the patients in the MUA group had excellent results. In the ORIF group 8 out of 9 patients had good results. The only patient with a fair outcome was presented 3 weeks post injury and was managed with osteotomy and ORIF of the ulna. Discussion and conclusion. According to our recorded experience conservative management of Monteggia fractures, when indicated, results in excellent outcomes. In cases where emergency MUA fails to achieve or maintain reduction, the choice of ORIF has also demonstrated good results. Early diagnosis and management are of paramount importance as mismanaged cases demonstrate the less satisfactory results