Aims. To determine the effectiveness of prone traction radiographs in predicting postoperative slip distance, slip angle, changes in disc height, and lordosis after surgery for degenerative spondylolisthesis of the lumbar spine. Methods. A total of 63 consecutive patients with a degenerative spondylolisthesis and preoperative prone traction radiographs obtained since 2010 were studied. Slip distance, slip angle, disc height, segmental lordosis, and global lordosis (L1 to S1) were measured on preoperative lateral standing radiographs, flexion-extension lateral radiographs, prone traction lateral radiographs, and postoperative lateral standing radiographs. Patients were divided into two groups: posterolateral fusion or posterolateral fusion with interbody fusion. Results. The mean changes in segmental lordosis and global lordosis were 7.1° (SD 6.7°) and 2.9° (SD 9.9°) respectively for the interbody fusion group, and 0.8° (SD 5.1°) and -0.4° (SD 10.1°) respectively for the posterolateral fusion-only group. Segmental lordosis (ρ = 0.794, p < 0.001) corrected by interbody fusion correlated best with prone traction radiographs. Global lumbar lordosis (ρ = 0.788, p < 0.001) correlated best with the interbody fusion group and preoperative lateral standing radiographs. The least difference in slip distance (-0.3 mm (SD 1.7 mm), p < 0.001), slip angle (0.9° (SD 5.2°), p < 0.001), and disc height (0.02 mm (SD 2.4 mm), p < 0.001) was seen between prone traction and postoperative radiographs. Regression analyses suggested that prone traction parameters best predicted correction of slip distance (Corrected Akaike’s Information Criterion (AICc) = 37.336) and disc height (AICc = 58.096), while correction of slip angle (AICc = 26.453) was best predicted by extension radiographs. Receiver operating characteristic (ROC) cut-off showed, with 68.3% sensitivity and 64.5% specificity, that to achieve a 3.0° increase in segmental lordotic angle, patients with a prone traction disc height of 8.5 mm needed an interbody fusion. Conclusion. Prone traction radiographs best predict the slip distance and disc height correction achieved by interbody fusion for lumbar degenerative spondylolisthesis. To achieve this maximum correction, interbody fusion should be undertaken if a disc height of more than 8.5 mm is attained on preoperative prone traction radiographs. Level of Evidence: Level II Prognostic Study. Cite this article: Bone Joint J 2020;102-B(8):1062–1071

Aim:. To compare the ability of fulcrum bend and traction radiographs to predict correction of AIS using pedicle screw only constructs and to compare the fulcrum bending correction index (FBCI) with a new measurement: the traction correction index (TCI). Method:. Retrospective radiographic analysis of eighty patients, average age 14 yrs, who underwent posterior correction of scoliosis using pedicle screw only construct. Analysis was carried out on the pre-op and immediate post-op PA radiographs and the pre-op fulcrum bend and traction radiographs. Correction rate, fulcrum flexibility, traction flexibility, FBCI and TCI was calculated. Results:. Preoperative mean Cobb angle of 63.9 degrees was corrected to 25.8 degrees postoperatively. The mean fulcrum bending Cobb angle was 37.6 degrees and traction Cobb angle 26.6 degrees. The mean fulcrum flexibility was 41.1%, traction flexibility 58.4% and correction rate 59.6%. The mean FBCI was 144.9% and TCI was 102.1%. Discussion:. Radiographic correction of scoliosis based on correction rate does not take into consideration the curve flexibility. It has been suggested by Cheung et al, that fulcrum bending radiographs predict curve correction in AIS. Ibrahim et al, have questioned this, and they suggested that traction radiographs are more predictive in a mixed group of patients with hybrid and screw only constructs. Conclusions:. When comparing fulcrum bend and traction radiographs, we found the latter to be more predictive of curve correction in AIS using pedicle screw constructs. The TCI better takes into account the curve flexibility than the FBCI. Conflict Of Interest Statement: No conflict of interest

To compare the ability of fulcrum bend and traction radiographs to predict correction of AIS using screw only implants and to assess the fulcrum bending correction index (FBCI) with a new measurement: the traction correction index (TCI). Retrospective radiographic analysis of case series (Level IV). Radiographic correction of scoliosis based on correction rate does not take into consideration the curve flexibility. It has been suggested that fulcrum bending radiographs predict curve correction in AIS [1]. This has been questioned [2] and has been suggested that traction radiographs are more predictive in a mixed group of patients with hybrid and screw only constructs. Twenty three patients average age 15, who underwent posterior correction of scoliosis using pedicle screw only construct. Analysis was carried out on the pre-op and immediate post-op AP radiographs and the pre-op fulcrum bend and traction radiographs. Correction rate, fulcrum flexibility, traction flexibility, FBCI and TCI was calculated. Preoperative mean Cobb angle of 66 degrees was corrected to 25 degrees postoperatively. The mean fulcrum bending Cobb angle was 38 degrees and traction Cobb angle 28 degrees. The mean fulcrum flexibility was 45%, traction flexibility 59% and correction rate 63%. The mean FBCI was 182% and TCI was112%. When comparing fulcrum bend and traction radiographs, we found the latter to be more predictive of curve correction in AIS using pedicle screw constructs. The TCI better takes into account the curve flexibility than the FBCI

Our aim in this prospective radiological study was to determine whether the flexibility rate calculated from radiographs obtained during forced traction under general anaesthesia, was better than that of fulcrum-bending radiographs before corrective surgery in predicting the extent of the available correction in patients with idiopathic scoliosis. We evaluated 33 patients with a Cobb angle > 60° on a standing posteroanterior radiograph, who had been treated by posterior correction. Pre-operative standing fulcrum-bending radiographs and those with forced-traction under general anaesthesia were obtained. Post-operative standing radiographs were taken after surgical correction. The mean forced-traction flexibility rate was 55% (. sd. 11.3) which was significantly higher than the mean fulcrum-bending flexibility rate of 32% (. sd. 16.1) (p < 0.001). We found no correlation between either the forced-traction or fulcrum-bending flexibility rates and the correction rate post-operatively (p = 0.24 and p = 0.44, respectively). Radiographs obtained during forced traction under general anaesthesia were better at predicting the flexibility of the curve than fulcrum-bending radiographs in curves with a Cobb angle > 60° in the standing position and may identify those patients for whom supplementary anterior surgery can be avoided

Aim:. The Lenke Classification for adolescent idiopathic scoliosis (AIS) classifies curves as nonstructural if they reduce to less than 25° on bending radiographs. We aimed to establish whether there is a significant difference in curves assessed as structural/ nonstructural when comparing bending radiographs to forced traction radiographs. Methods:. We undertook a retrospective database review of 100 consecutive AIS patients having undergone surgical correction by the 2 senior authors, together with radiographic review. Curves were classified according to the Lenke system including modifiers. Magnitude of the minor curves were compared on plain PA standing radiographs, bending radiographs and forced traction radiographs. Results:. There were 35 Lenke 1 curves. 24 Of the minor curves measured greater than 25° on plain PA radiographs. None of these remained greater than 25° on either bending or forced traction radiographs. There were 13 Lenke 2 curves, 11 of which had minor curves greater than 25°. None of these remained greater than 25° on either bending or forced traction radiographs. 14 Lenke 3 curves, 7 of which had minor proximal thoracic curves greater than 25°. 2 of these remained greater than 25° on bending whilst all reduced to less than 25° with traction. 8 Lenke 5 pattern curves, 5 of which had minor curves >25°. One curve remained >25° on both bending and traction radiographs. 8 Lenke 6 pattern curves none of which had a minor curve exceeding 25°. Conclusions:. Our results have shown no significant differences between curves classified as structural/ non-structural based on results obtained for bending radiographs versus forced traction radiographs for any of the Lenke curve patterns. Conflict Of Interest Statement: No conflict of interest

The aim of this study was to compare the treatment ouctomes of severe idiopathic scoliosis (IS) (>90 degrees) using the staged surgery with initial limited internal distraction and typical IS treated using segmental pedicle screw instrumentation. We hypothesized that staged surgical treatment of severe scoliosis would improve more HRQoL and pulmonary function (PF) as compared with posterior spinal fusion (PSF) for typical IS curves. It was a retrospective review of a consecutive series of 60 IS, severe group (SG) vs. moderate group (MG) with min. 2 years of follow up (FU). The mean preoperative major curve (MC) was 120° and thoracic kyphosis (TK) was 80° for the SG and 54° and 17° for the MG, respectively (p<0.001). The MC was corrected to 58° and TK to 32° for the SG; the MC to 26° and TK to 14°, for the MG, respectively (p<0.001). The mean preoperative AVT was 8.9 cm and improved to 2.8 cm at the final FU for the SG and from 6.5 cm to 2.2 cm at the final FU for the MG (p<0.001). At baseline, the FVC% & FEV1% values were significant different between the two groups (41.5% vs. 83%, p <0.001) & (41.6% vs. 77%, p <0.001). Compared the baseline for SG vs. the values at 2-year FU the FVC % values were (41.5% vs. 66.5%, p <0.001), and the baseline for MG vs. the values at 2-year FU, the FEV1 values were (77% vs. 81%, NS). At last FU, no complications were reported. Gradual traction with complicity of multilevel Ponte's osteotomies and neuromonitoring followed by staged pedicle screws instrumentation in severe IS proved to be a safe and effective method improving spinal deformity (52% correction), PF (improved percentage of predicted forced vital capacity by 49%), and health-related quality and allows to achieve progressive curve correction with no neurologic complications associated to more aggressive one-stage surgeries

Aims

To determine whether side-bending films in scoliosis are assessed for adequacy in clinical practice; and to introduce a novel method for doing so.

Aims

Surgical approaches to cervical ossification of the posterior longitudinal ligament (OPLL) remain controversial. The purpose of the present study was to analyze and compare the long-term neurological recovery following anterior decompression with fusion (ADF) and posterior laminectomy and fusion with bone graft and internal fixation (PLF) based on > ten-year follow-up outcomes in a single centre.

Dysphagia is a common complication of anterior surgery of the cervical spine. The incidence of post-operative dysphagia may be as high as 71% within the first two weeks after surgery, but gradually decreases during the following months. However, 12% to 14% of patients may have some persistent dysphagia one year after the procedure. It has been shown that female gender, advanced age, multilevel surgery, longer operating time and severe pre-operative neck pain may be risk factors. Although the aetiology remains unclear and is probably multifactorial, proposed causes include oesophageal retraction, prominence of the cervical plate and prevertebral swelling. Recently, pre-operative tracheal traction exercises and the use of retropharyngeal steroids have been proposed as methods of reducing post-operative dysphagia. We performed a systematic review to assess the incidence, aetiology, risk factors, methods of assessment and management of dysphagia following anterior cervical spinal surgery. Cite this article: Bone Joint J 2013;95-B:868–73

Purpose of study. NICE recommends 8-9 sessions of non operative therapy for back pain that has lasted for 6 weeks but less than 12 months. NICE recommended exercises, manual therapy, acupuncture and suggested that Lumbar supports, TENS, Ultrasound and Traction should not be offered. Since multiple methods and disciplines were available a survey was conducted among the local General Practitioners to determine what non operative methods they preferred and how it matched with NICE's recommendation. Methods. An online survey was conducted on . www.surveymonkey.com. among the local GPs to determine their practice and preferences in investigating low back pain. The 5 questions in the survey were “rating scale questions” on a scale of 1 and 10, where 1 = DISAgree and 10 = Agree. A request to participate in the survey was sent to all the local General Practitioners by e-mail. Results. 25 General Practitioners participated in the survey. A sample of the scores obtained were as follows. Method of treatment. Mean Score. Mobilisation exercises. 8.20. Specific Core Stability Exercises. 8.13. Physiotherapy. 7.96. Pilates. 7.21. Attending a Gymnasium. 6.32. Medications. 6.20. Yoga. 6.18. TENS (Transcutaneous electrical nerve stimulation). 5.44. Acupuncture. 5.44. Chiropractory. 5.42. Osteopathy. 5.41. Massage. 4.73. Ultrasound. 3.43. Traction. 2.75. Lumbar support. 2.65. Conclusion. This limited study demonstrates that General Practitioners prefer patients to use active modalities of treatment like exercises which require participation of the patient rather than passive methods of treatment like lumbar support and massage. The choices of the GPs are nearly in tune with the recommendations of NICE with some exceptions. TENS (not recommended by NICE) obtained a better score than Acupuncture (recommended by NICE)

Aims

The aim of this study was to assess the ability of morphological spinal parameters to predict the outcome of bracing in patients with adolescent idiopathic scoliosis (AIS) and to establish a novel supine correction index (SCI) for guiding bracing treatment.

This review provides a concise outline of the advances made in the care of patients and to the quality of life after a traumatic spinal cord injury (SCI) over the last century. Despite these improvements reversal of the neurological injury is not yet possible. Instead, current treatment is limited to providing symptomatic relief, avoiding secondary insults and preventing additional sequelae. However, with an ever-advancing technology and deeper understanding of the damaged spinal cord, this appears increasingly conceivable. A brief synopsis of the most prominent challenges facing both clinicians and research scientists in developing functional treatments for a progressively complex injury are presented. Moreover, the multiple mechanisms by which damage propagates many months after the original injury requires a multifaceted approach to ameliorate the human spinal cord. We discuss potential methods to protect the spinal cord from damage, and to manipulate the inherent inhibition of the spinal cord to regeneration and repair. Although acute and chronic SCI share common final pathways resulting in cell death and neurological deficits, the underlying putative mechanisms of chronic SCI and the treatments are not covered in this review.

Aims

The outcome following the development of neurological complications after corrective surgery for scoliosis varies from full recovery to a permanent deficit. This study aimed to assess the prognosis and recovery of major neurological deficits in these patients, and to determine the risk factors for non-recovery, at a minimum follow-up of two years.

Aims

To report the outcome of spinal deformity correction through anterior spinal fusion in wheelchair-bound patients with myelomeningocele.

Background. Low back pain (LBP) is widespread in all populations and is a worldwide health problem, which poses substantial challenges for clinical management. Individuals with LBP may reduce their symptoms by implementing self-managed at-home interventions. The theoretical design of the LumbaCurve™ promotes the principles of a passive gravity-assisted traction (PGAT) stretch of the lumbar and sacral region in order to reduce LBP. This study aimed to assess the clinical effectiveness of the LumbaCurve™ in the management of LBP when compared to a control group of standardised care. Methods. Following a screening form using Red Flags and STarT Back tools, 60 individuals with LBP were recruited to the 4-week intervention. Eligible participants completed a pre-intervention questionnaire and were randomly allocated to either ‘standardised care’ or ‘standardised care PLUS LumbaCurve™’ group. Intervention material was trialled for 4 weeks consecutively, followed by a post-intervention questionnaire. Pre and post assessments applied the Roland Morris Disability Questionnaire (RMDQ), Patient Reported Outcome Measures (PROMS). Results. Interim results suggested RMDQ values demonstrate a trend toward the classification of ‘definite improvement’ following standardised care plus LumbaCurve™ intervention. When comparing pre/post outcomes alone for the intervention of standardised care plus LumbaCurve™, significant reductions in RMDQ results occurred (p=.014). PROMS results reported a significant decrease (p=.015) in average pain rating when comparing interventions. Conclusion. Initial findings report that through a four week intervention programme, significant improvements in patient reported back pain levels are demonstrated following standardised care plus LumbaCurve™ intervention. This abstract has not been previously published in whole or substantial part and has not been previously presented at a national meeting. Conflicts of interest: No conflicts of interest. Sources of funding: Spark Ventures UK

Aims

To describe the clinical, radiological, and functional outcomes in patients with isolated congenital thoracolumbar kyphosis who were treated with three-column osteotomy by posterior-only approach.

Background. Rotatory subluxation of the atlantoaxial joint has been thoroughly documented in children. However, pure traumatic atlantoaxial rotatory subluxation (TAARS) is a rare injury in adults with only a few cases reported in the English literature. Aim. To report two cases of TAARS in adults. Methods. A case note, clinical and radiological review. Results. Both patients were female. There was a history of a motor vehicle collision in both cases. There was no neurological impairment at presentation in either case. The injury in both cases was identified by plain X-ray and confirmed by CT scan. Both were managed by conservative treatment, initially with halo traction, followed by immobilisation in a rigid collar. Final clinical reviews occurred at 7 years and 2.5 years following injury. Neither patient had signs of C1-C2 instability or impaired neurology. Both patients, however, suffered headaches and occipital neuralgia, with stiffness and reduction in cervical spine movement. Conclusion. Traumatic rotatory subluxation in adults is a rare injury. It can pose a diagnostic challenge and CT scanning is mandatory for a correct evaluation of the C1-2 complex. Reduction and stability can be achieved through conservative treatment. However, it is evident from this short series that even early diagnosis and prompt reduction may not necessarily result in a good long term outcome in adult patients with TAARS

Purpose. Patients with ankylosing spondylitis (AS) are vulnerable to cervical spine injury following relatively minor trauma. The authors present a retrospective review to determine the characteristics, treatment and outcome following cervical spine injury in these patients. Methods. Retrospective analysis of case notes and images of patients with AS admitted to the Spinal Injury Unit over a 10-year period. Results. Thirty-nine patients were identified. Records were available for 31 patients at the time of this analysis. The median age was 62 years (range 37-84). The male:female ratio was 7:1. Mechanisms of injury included falls (72%) and RTAs (7%), while 14% were unable to recall an injury. Alcohol was involved in 20% of the cases. Fracture through an ankylosed disc in the mid to low cervical spine was the commonest injury. Concomitant non-contiguous bony injury was seen in 2 patients. More than half (55%) were Grade E on ASIA impairment scale (AIS), while 14% were Grade A and 31% Grade D. Two patients required skull traction. Most patients were successfully treated by external immobilisation. Halo crown and jacket was the most common orthosis used. Twelve patients underwent surgical stabilisation. The mean duration of external immobilisation in the non-surgical group was 13 weeks (range 10-32), whereas following surgery it was 6 weeks (range 2-8). Adequate radiological evidence of fusion was seen in all 22 patients for whom this information was available at a median of 22 weeks (range 12-32). Patients with AIS Grade A and E were unchanged at discharge, while 4 patients in AIS Grade D improved to E. Conclusion. External immobilisation with halo in an effective first-line therapy in achieving fusion and stability. Surgical stabilisation can be reserved as a second-line treatment

Purpose. Patients with ankylosing spondylitis (AS) are vulnerable to cervical spine injury following relatively minor trauma. The authors present a retrospective review to determine the characteristics, treatment and outcome following cervical spine injury in these patients. Methods. Retrospective analysis of case notes and images of patients with AS admitted to the Spinal Injury Unit over a 10-year period. Results. Thirty-nine patients were identified. Records were available for 31 patients at the time of this analysis. The median age was 62 years (range 37-84). The male:female ratio was 7:1. Mechanisms of injury included falls (72%) and RTAs (7%), while 14% were unable to recall an injury. Alcohol was involved in 20% of the cases. Fracture through an ankylosed disc in the mid to low cervical spine was the commonest injury. Concomitant non-contiguous bony injury was seen in 2 patients. More than half (55%) were Grade E on ASIA impairment scale (AIS), while 14% were Grade A and 31% Grade D. Two patients required skull traction. Most patients were successfully treated by external immobilisation. Halo crown and jacket was the most common orthosis used. Twelve patients underwent surgical stabilisation. The mean duration of external immobilisation in the non-surgical group was 13 weeks (range 10-32), whereas following surgery it was 6 weeks (range 2-8). Adequate radiological evidence of fusion was seen in all 22 patients for whom this information was available at a median of 22 weeks (range 12-32). Patients with AIS Grade A and E were unchanged at discharge, while 4 patients in AIS Grade D improved to E. Conclusion. External immobilisation with halo in an effective first-line therapy in achieving fusion and stability. Surgical stabilisation can be reserved as a second-line treatment

Introduction. Halo traction, either on bed or with an accompanying vest is used commonly in Spine surgery, in a variety of clinical situations. The pins are inserted into the skull in safe anatomic zones, using wrenches that are either pre-torqued or exhibit a torque gauge to allow measurable torque application. A torque of 6 – 8 inch pounds is considered ideal for optimal pin tightening. Lesser torques may hypothetically lead to pin loosening and pin track infections, while, excessive torques could lead to pin penetration through the skull. Aim. To test the accuracy and consistency of different torque wrenches used for Halo pin insertion, using a standardised calibration device. Methodology. Three different types of torque wrenches were tested, using the MTS Systems 858 Mini Bionix II calibration device at the School of Engineering laboratory in Cardiff. Each type had four samples. Three more samples of one type, which were already in use at the Spine unit were also tested, making a total sample size of fifteen. The calibration device had a declared average error of 0.5 %. Each torque wrench was tested twenty five times to a pre set value of 6 inch pounds (0.67790897 N-m), resulting in 375 independent observations. Data was recorded electronically and was analysed for error, percentage of error and variability for each device. Results. All wrenches, regardless of model or make, failed to deliver accurate torque at the pre set value on repeated testing. There were both negative and positive errors. The average torque delivered by all wrenches together at a pre set value of 0.67790897 N-m was 0.721337 (+/- 0.116919) N-m. The average percent error for individual wrenches ranged from 4 % to 34 %. When grouped by model, the average percent error (model specific) ranged from 5 % to 29 %. When assessed for consistency, the wrenches revealed a range of values over a minimum of 0.053303 N-m to a maximum of 0.846512 N-m. The variability of all wrenches of one model type was however similar, though not identical. The best performing model had an average variation over 0.165531 N-m while the value for the worst was 0.685794 N-m. Conclusion. Torque wrenches used to tighten Halo pins appear to be neither accurate nor consistent. They deliver torques that are either less than or more than their pre set levels. Different wrenches of one model displayed a similar pattern of variability. While this study does not seek to relate this lack of accuracy and consistency to the development of specific complications like loosening or penetration, it does suggest that extreme care is advisable while using torque wrenches to minimise clinical mishaps