Treatment for delayed wound healing resulting from peripheral vascular diseases and diabetic foot ulcers remain a challenge. A novel surgical technique named Tibial Cortex Transverse Transport has been developed for treating peripheral ischaemia, with encouraging clinical effects. However, its underlying mechanisms remain unclear. In present study, we aimed to explore the wound healing effects after undergoing this novel technique via multiple ways. A novel rat model of Tibial Cortex Transverse Transport was established with a designed external fixator and effects on wound healing were investigated. All rats were randomized into 3 groups, with 12 rats per group: sham group (negative control), fixator group (positive control) and Tibial Cortex Transverse Transport group. Laser speckle perfusion imaging, vessel perfusion, histology and immunohistochemistry were used to evaluate the wound healing processes. Gross and histological examinations showed that Tibial Cortex Transverse Transport technique accelerated wound closure and enhanced the quality of the newly formed skin tissues. In Tibial Cortex Transverse Transport group, HE staining demonstrated a better epidermis and dermis recovery, while immune-histochemical staining showed that Tibial Cortex Transverse Transport technique promoted local collagen deposition. Tibial Cortex Transverse Transport technique also benefited to angiogenesis and immunomodulation. In Tibial Cortex Transverse Transport group, blood flow in the wound area was higher than that ofother groups according to laser speckle imaging with more blood vessels observed. Enhanced neovascularization was seen in the Tibial Cortex Transverse Transport group with double immune-labelling of CD31 and α-SMA. The M2 macrophages at the wound site in the Tibial Cortex Transverse Transport group was also increased. Tibial cortex transverse transport technique accelerated wound healing through enhanced angiogenesis and immunomodulation

We examined the placement of the stem in relation to the medial tibial cortex when using total knee replacements (TKRs) with medially-offset tibial stems in Korean patients. Measurements were performed on the pre- and post-operative radiographs of 246 osteoarthritic knees replaced between January 2005 and May 2006 using the Genesis II or E-motion TKR with a medially-offset stem. Pre-operatively, we measured the distance between the mechanical axis and that of the tibial shaft and post-operatively, that between the midline of the tibial stem and the axis of the shaft. Knees were identified in which there was radiological contact between the tip of the stem and the medial tibial cortex. The mechanical axis was located medial to the axis of the shaft in 203 knees (82.5%). Post-operatively, the midline of the tibial stem was located medial to the tibial shaft axis in 196 knees (79.7%). In 16 knees (6.5%) there was radiological contact between the tibial stem or cement mantle and the medial tibial cortex. Our study has shown that the medially-offset stem in the tibial component may not be a good option for knees undergoing replacement for advanced osteoarthritis in some Korean patients

Objective. The purpose of the present study was to compare the clinical and radiographic results after TKA using a patellofemoral design modified prosthesis and its predecessor. The other purpose was to investigate whether the use of the recent prosthesis increase the risk of posterior tibial cortex injury or patellar fracture. Materials and Methods. The clinical and radiographic results of 300 knees which underwent TKA using the Attune®prosthesis (group A) were compared with those in a paired match-control group who underwent TKA using the P.F.C. Sigma® prosthesis (group B). The preoperative demographic data between the 2 groups did not differ significantly. The WOMAC, Feller and Kujala scores, and range of motion (ROM) were compared. The minimal distance between the tibial component stem to posterior tibial cortex, and the remnant patella thickness were compared. Results. The postoperative WOMAC score was better in the group A than in the group B (17.7 vs. 18.8, p=0.004). The postoperative ROM was greater in the group A than in the group B (131.4° vs. 129.0°, p=0.008). The postoperative Feller score was not different, but postoperative Kujala score was better in the group A. The minimal distance between the tibial component stem and posterior tibial cortex was significantly shorter in group A than in the group B (6.3mm vs 7.0mm, p<0.001). The proportion of high risk group for posterior tibial cortical injury, which had the minimal distance less than 4mm, was higher in the group A (20.0% vs 10.7%, p=0.002). The remnant patella was thinner in the group A than in the group B (14.8mm vs 15.7mm, p<0.001). The proportion of high risk group for patella fracture with remnant thickness of <12mm was higher in the group A (7.5% vs 2.1%, p=0.003). Conclusion. When comparing the clinical and radiographic results after TKA using the two prostheses of a design modified prosthesis and its predecessor, TKA using the recent prosthesis provided better satisfactory results. However, the risk of injury in the posterior cortex of the tibial metaphysis or remnant patella should be considered in this design modified prosthesis. Level of Evidence. Level III

The anterior curve of the tibial plateau cortex represents a realiable and reproducible landmark which may help aligning the tibial component with the femoral component and the extensor mechanism. Few studies analyzed the tibial component rotational alignment during total knee arthroplasty. Malrotation can affect both patello-femoral and tibio-femoral postoperative function. We evaluated the rotational relationship between femur and tibia, and we investigated which tibial landmark consistently matches the rotation of the femoral epicondylar axis in full extension (Fig 1). Axial magnetic resonance images of 124 normal knees (statistical power 1-beta=0.8) were analyzed separately by three authors. Scanograms were obtained with the knee in full extension and with the long axis of the foot (second metatarsal bone) aligned on the neutral sagittal plane. The surgical epicondylar axis was drawn and projected over the proximal tibia and tibial tuberosity slices. Multiple anatomical tibial rotational landmarks were drawn and symmetric tibial component digital templates of different sizes were aligned according to each landmark. Alignment of the virtual tibial components was then compared to that of the projected femoral epicondylar axis (Fig 2). The best antero-posterior line to achieve rotational matching between the components was drawn on the proximal tibia slice of each patient. Results of rotation (positive = external rotation, negative = internal) relative to the epicondylar axis were (Fig 3): (a) Medial third-to the middle third of the tibial tubercle 1.2°+/−5.7, (b) Akagi's line (centre of the posterior cruciate ligament tibial insertion to the most medial part of the tibial tubercle) -11.5+/−6.5, (c) The anterior curved tibial plateau cortex (curve-on-curve matching between the tibial template and the anterior cortex) 1.0+/−2.9. Intraclass correlation coefficient resulted 0.923, 0,881, and 0.949 for the Akagi's line, Middle third of tibial tubercle, and the curve-on-curve reference respectively. The anterior curve of the tibial plateau cortex represents a realiable and reproducible landmark which may help aligning the tibial component with the femoral component and the extensor mechanism (Fig 4, 5)

Aims

Treatment for delayed wound healing resulting from peripheral vascular diseases and diabetic foot ulcers remains a challenge. A novel surgical technique named ‘tibial cortex transverse transport’ (TTT) has been developed for treating peripheral ischaemia, with encouraging clinical effects. However, its underlying mechanisms remain unclear. In the present study, we explored the potential biological mechanisms of TTT surgery using various techniques in a rat TTT animal model.

Aims. Higher osteoblastic bone activity is expected in aseptic loosening and painful unicompartmental knee arthroplasty (UKA). However, insights into normal bone activity patterns after medial UKAs are lacking. The aim of this study was to identify the evolution in bone activity pattern in well-functioning medial mobile-bearing UKAs. Methods. In total, 34 patients (13 female, 21 male; mean age 62 years (41 to 79); BMI 29.7 kg/m. 2. (23.6 to 42.1)) with 38 medial Oxford partial UKAs (20 left, 18 right; 19 cementless, 14 cemented, and five hybrid) were prospectively followed with sequential 99mTc-hydroxymethane diphosphonate single photon emission CT (SPECT)/CT preoperatively, and at one and two years postoperatively. Changes in mean osteoblastic activity were investigated using a tracer localization scheme with volumes of interest (VOIs), reported by normalized mean tracer values. A SPECT/CT registration platform additionally explored cortical tracer evolution in zones of interest identified by previous experimental research. Results. Significant reduction of tracer activity from the preoperative situation was found in femoral and anteromedial tibial VOIs adjacent to the UKA components. Temporarily increased osteoblastic bone activity was observed in VOIs comprising the UKA keel structure at one year postoperatively compared to the preoperative activity. Persistent higher tracer uptake was found in the posterior tibial cortex at final follow-up. Multivariate analysis showed no statistical difference in osteoblastic bone activity underneath cemented or cementless components. Conclusion. Well-functioning medial mobile-bearing UKAs showed distinct changes in patterns of normalized bone tracer activity in the different VOIs adjacent to the prosthetic components, regardless of their type of fixation. Compared to the preoperative situation, persistent high bone activity was found underneath the keel and the posterior tibial cortex at final follow-up, with significant reduced activity only being identified in femoral and anteromedial tibial VOIs. Cite this article: Bone Joint J 2022;104-B(1):34–44

Aims. A fracture of the medial tibial plateau is a serious complication of Oxford mobile-bearing unicompartmental knee arthroplasty (OUKA). The risk of these fractures is reportedly lower when using components with a longer keel-cortex distance (KCDs). The aim of this study was to examine how slight varus placement of the tibial component might affect the KCDs, and the rate of tibial plateau fracture, in a clinical setting. Methods. This retrospective study included 255 patients who underwent 305 OUKAs with cementless tibial components. There were 52 males and 203 females. Their mean age was 73.1 years (47 to 91), and the mean follow-up was 1.9 years (1.0 to 2.0). In 217 knees in 187 patients in the conventional group, tibial cuts were made orthogonally to the tibial axis. The varus group included 88 knees in 68 patients, and tibial cuts were made slightly varus using a new osteotomy guide. Anterior and posterior KCDs and the origins of fracture lines were assessed using 3D CT scans one week postoperatively. The KCDs and rate of fracture were compared between the two groups. Results. Medial tibial fractures occurred after surgery in 15 patients (15 OUKAs) in the conventional group, but only one patient (one OUKA) had a tibial fracture after surgery in the varus group. This difference was significant (6.9% vs 1.1%; p = 0.029). The mean posterior KCD was significantly shorter in the conventional group (5.0 mm (SD 1.7)) than in the varus group (6.1 mm (SD 2.1); p = 0.002). Conclusion. In OUKA, the distance between the keel and posterior tibial cortex was longer in our patients with slight varus alignment of the tibial component, which seems to decrease the risk of postoperative tibial fracture. Cite this article: Bone Joint J 2022;104-B(10):1118–1125

Background. Rotational alignment is important for the long-term success and good functional outcome of total knee arthroplasty (TKA). While the surgical transepicondylar axis (sTEA) is the generally accepted landmark on the distal femur, a precise and easily identifiable anatomical landmark on the tibia has yet to be established. Our aim was to compare five axes on the proximal tibia in normal and osteoarthritic (OA) knees to determine the best landmark for determining rotational alignment during TKA. Methods. One hundred twenty patients with OA knees and 30 without knee OA were recruited for the study. Computed tomography (CT) images were obtained and converted through multiplanar reconstruction so the angles between the sTEA and the axes of the proximal tibia could be measured. Five AP axes were chosen: the line connecting the center of the posterior cruciate ligament(PCL) and the medial border of the patellar tendon at the cutting level of the tibia (PCL-PT), the line from the PCL to the medial border of the tibial tuberosity (PCL-TT1), the line from the PCL to the border of the medial third of the tibia (PCL-TT2), the line from the PCL to the apex of the tibia (PCL-TT3), and the AP axis of the tibial prosthesis along with the anterior cortex of the proximal tibia (anterior tibial curved cortex, ATCC). Results. In OA knees, the mean angles were less than those in normal knees for all 5 axes tested. In normal knees, the angle of the ATCC axis had the smallest mean value (1.6° ± 2.8°) and the narrowest range. In OA knees, the angle of the PCL-TT1 axis had the smallest mean value (0.3° ± 5.5°); however, the standard deviation (SD) and range were wider than that of the angle of the ATCC axis. The mean angle of the ATCC axis was larger (0.8° ± 2.7°) than the angle of the PCL-TT1 axis, but the difference was not statistically significant (P =0.461). The angle of the ATCC axis had the smallest SD and the narrowest range. Conclusion. In OA knees, the AP axis of the proximal tibia showed greater internal rotation compared with normal knees. In our study, the ATCC was found to be the most reliable and useful anatomical landmark for tibial rotational alignment in TKA

Objectives. Little biomechanical information is available about kinematically aligned (KA) total knee arthroplasty (TKA). The purpose of this study was to simulate the kinematics and kinetics after KA TKA and mechanically aligned (MA) TKA with four different limb alignments. Materials and Methods. Bone models were constructed from one volunteer (normal) and three patients with three different knee deformities (slight, moderate and severe varus). A dynamic musculoskeletal modelling system was used to analyse the kinematics and the tibiofemoral contact force. The contact stress on the tibial insert, and the stress to the resection surface and medial tibial cortex were examined by using finite element analysis. Results. In all bone models, posterior translation on the lateral side and external rotation in the KA TKA models were greater than in the MA TKA models. The tibiofemoral force at the medial side was increased in the moderate and severe varus models with KA TKA. In the severe varus model with KA TKA, the contact stress on the tibial insert and the stress to the resection surface and to the medial tibial cortex were increased by 41.5%, 32.2% and 53.7%, respectively, compared with MA TKA, and the bone strain at the medial side was highest among all models. Conclusion. Near normal kinematics was observed in KA TKA. However, KA TKA increased the contact force, stress and bone strain at the medial side for moderate and severe varus knee models. The application of KA TKA for severe varus knees may be inadequate. Cite this article: S. Nakamura, Y. Tian, Y. Tanaka, S. Kuriyama, H. Ito, M. Furu, S. Matsuda. The effects of kinematically aligned total knee arthroplasty on stress at the medial tibia: A case study for varus knee. Bone Joint Res 2017;6:43–51. DOI: 10.1302/2046-3758.61.BJR-2016-0090.R1

Objectives. Proximal tibial fracture is one of the most common postoperative complications of unilateral knee arthroplasty (UKA). The objective of the present study is to investigate the risk factors of these fractures, occurred after UKA in our facility. Method. We performed 314 UKAs between May 2006 and December 2013. All cases were done using Oxford UKA. Proximal tibial fractures were observed in 5 cases. 4 cases were female and 1 case was male, and the age at the operation ranged from 73 to 90. All cases were osteoarthritis. 4 cases were diagnosed as stress fracture with minimum displacement, and 1 case was fracture with displacement. We investigated the risk factors of the tibial fracture among those 5 cases. Low bone mineral density(BMD), the presence of medial tibial cortex pinhole, excessive vertical cut, and adjacence of keel and posterior tibia cortex were estimated as risk factors. Results. The loss in BMD was seen in all cases. Medial tibial cortex pinhole was recognized in 2 cases. Excessive vertical cut was recognized in 3 cases. Adjacence of keel and posterior tibia bone cortex was recognized in 3 cases, and the distance between keel and posterior tibia bone cortex was less than 3mm in all of these 3 cases. 4 cases those diagnosed as stress fractures, healed spontaneously with conservative treatment, but the case with displaced fragment needed ORIF. Discussion. Loss in BMD was seen in all cases as predicted, and this is one of the highest risk factors in UKA patient. Preoperative PTH use is recommended when low BMD was seen. Other risk factors are, medial tibial cortex pinhole, excessive vertical cut, and adjacence of keel and posterior tibial cortex. These risk factors are preventable if some cares are taken during the operation. Medial inclination of the tibial plateau should be checked preoperatively to avoid excessive vertical cut. If the distance between keel and posterior tibial cortex is less than 3mm at the preoperative planning, we should consider converting the implant. Furthermore, it is important to pay attention to intraoperative procedures. We should not use heavy hammer and avoid excessive varus force during cementing. For the prevention of tibial fractures after UKA, both strict preoperative planning and prevention of intraoperative errors are important

The purpose of this study was to determine the incidence of graft-tunnel mismatch (GTM) when performing anatomic anterior cruciate ligament reconstruction (ACLR) using bone-patella tendon-bone (BPTB) grafts and anteromedial portal drilling. Beginning in November 2018, 100 consecutive patients who underwent ACLR by two sports fellowship-trained, orthopedic surgeons using BPTB autograft and anteromedial portal drilling were prospectively identified. The BPTB graft dimensions and the femoral tunnel distance, tibial tunnel distance, intra-articular distance, and total distance were measured. Surgeons determined the depth and angle of tunnels based on the patella tendon graft length dimensions in each case. After passage of the graft, the distance from the distal graft tip to the tibial cortex aperture was measured. GTM was defined as the need for additional measures to obtain satisfactory tibial graft fixation (< 1 5e20 mm of bone fixation). The incidence of mismatch was 6/100 (6%). Five cases involved the graft being too long, with the tibial bone plug protruding excessively from the tibial tunneld4/5 had a patella tendon length ? 50 mm. Three cases were managed with femoral tunnel recession, and two were treated with a free bone plug technique. One patient with a patella tendon length of 35 mm had a graft that was too short, with the tibial bone plug recessed in the tibial tunnel. Of patients whose tibial tunnel distance was within 5 mm of the patella tendon length, only 1/46 (2%) patients had mismatch, whereas 5/54 (9%) of patients who had >5 mm difference had mismatch. The incidence of grafttunnel mismatch after anatomic ACLR using BTPB and anteromedial portal drilling in this study is 6%. To limit the occurrence of GTM where the graft is too long, surgeons should drill tibial tunnel distances within 5 mm of the patella tendon length

Aims. Arthroplasty has become increasingly popular to treat end-stage ankle arthritis. Iatrogenic posterior neurovascular and tendinous injury have been described from saw cuts. However, it is hypothesized that posterior ankle structures could be damaged by inserting tibial guide pins too deeply and be a potential cause of residual hindfoot pain. Methods. The preparation steps for ankle arthroplasty were performed using the Infinity total ankle system in five right-sided cadaveric ankles. All tibial guide pins were intentionally inserted past the posterior tibial cortex for assessment. All posterior ankles were subsequently dissected, with the primary endpoint being the presence of direct contact between the structure and pin. Results. All pin locations confer a risk of damaging posterior ankle structures, with all posterior ankle structures except the flexor hallucis longus tendon being contacted by at least one pin. Centrally-aligned transcortical pins were more likely to contact posteromedial neurovascular structures. Conclusion. These findings support our hypothesis that tibial guide pins pose a considerable risk of contacting and potentially damaging posterior ankle structures during ankle arthroplasty. This study is the first of its kind to assess this risk in the Infinity total ankle system. Cite this article: Bone Jt Open 2021;2(7):503–508

Aims. Cementless unicompartmental knee arthroplasty (UKA) has advantages over cemented UKA, including improved fixation, but has a higher risk of tibial plateau fracture, particularly in Japanese patients. The aim of this multicentre study was to determine when cementless tibial components could safely be used in Japanese patients based on the size and shape of the tibia. Methods. The study involved 212 cementless Oxford UKAs which were undertaken in 174 patients in six hospitals. The medial eminence line (MEL), which is a line parallel to the tibial axis passing through the tip of medial intercondylar eminence, was drawn on preoperative radiographs. Knees were classified as having a very overhanging medial tibial condyle if this line passed medial to the medial tibial cortex. They were also classified as very small if a size A/AA tibial component was used. Results. The overall rate of fracture was 8% (17 out of 212 knees). The rate was higher in knees with very overhanging condyles (Odds ratio (OR) 13; p < 0.001) and with very small components (OR 7; p < 0.001). The OR was 21 (p < 0.001) in those with both very overhanging condyles and very small components. In all, 69% of knees (147) had neither very overhanging nor very small components, and the fracture rate in these patients was 1.4% (2 out of 147 knees). Males had a significantly reduced risk of fracture (OR 0.13; p = 0.002), probably because no males required very small components and females were more likely to have very overhanging condyles (OR 3; p = 0.013). 31% of knees (66) were in males and in these the rate of fracture was 1.5% (1 out of 66 knees). Conclusion. The rate of tibial plateau fracture in Japanese patients undergoing cementless UKA is high. We recommend that cemented tibial fixation should be used in Japanese patients who require very small components or have very overhanging condyles, as identified from preoperative radiographs. In the remaining 69% of knees cementless fixation can be used. This approach should result in a low rate of fracture. Cite this article: Bone Joint J 2020;102-B(7):861–867

Introduction. A stem extension improves fixation stability of a tibial component. We need caution not to contact the tibial cortex with an offset adaptor. A symmetric tibial stem design often requires the component's re-positioning with negative effects. Therefore, the objective of this study was to validate clinical efficacy of a tibial baseplate with asymmetric stemmed position (TB-ASP) using aligning outlier rate. We hypothesized that TB-ASP design will be better aligned without unessential offset adaptor than a tibial baseplate with symmetric stemmed position (TB-SSP). Methods. TB-ASP was designed based on the anthropometric standard model (58 female cadavers, 54.7±11.4 years)(Figure 1.). To validate the stem position, 3D bone models of 20 OA patients (71.8±7.2 years) was reconstructed. All virtual surgery has done by one surgeon with consistent surgical procedure for the analysis criteria. An analysis of TB-ASP's aligning outlier was proceeded by following steps; 1) aligning tibial baseplate to the line from medial 1/3 tuberosity to the center of PCL, 2) selecting tibial baseplate's size for maximal bone coverage without problematic overhang, 3) trying to displace tibial baseplate and stem extension(120mm long) not to contact tibial cortex. A case invading tibial cortex was considered to be an outlier. The ratio using offset adaptor was compared to those of TB-SSP. Statistical analysis was performed using paired t-test. Results. TB-ASP's stem was optimized 31% AP position from the anterior and 45% ML position from the lateral. Its aligning outlier rate was decreased by 35% comparing to that of TB-SSP. For the offset from tibial medullary center to the stem extension center, there was no significant difference(p=0.66<0.05) between TB-ASP(3.60±3.05) & TB-SSP(3.8±2.30). Discussion and Conclusion. TB-ASP design based on the standard model was better aligned with a proposed position of tibial stem. The findings from this study suggest that asymmetric tibial stem will improve the alignment without offset adaptor in total knee replacement. Significance. TB-ASP design can show better outlier rate and alignment comparing to TB-SSP. Our study results can expect to be used as basic data for TB-ASP design

Introduction: Anthropometric anatomical factors may influence mechanical and functional stability of joints. An increased posterior tibial slope places the anterior cruciate ligament at a theroretical biomechanical disadvantage. An increased posterior tibial slope can potentially alter forces during landing tasks by either increasing anterior tibial translation and/or ACL loading. The purpose of this study is to investigate the relationship between posterior tibial slope and anterior cruciate ligament injuries. It is hypothesized that subjects with an ACL injury have an increased posterior tibial slope compared to a normal population. Methods: Posterior tibial slope in 211 patients (154 male, 57 female) aged 15–49 who underwent anterior cruciate ligament reconstruction was measured using the posterior tibial cortex as reference. A matched control group was used for comparison. Results: The average posterior tibial slope in the ACLR population was 6.1 degrees while the control group had average values of 5.4 degrees. This finding nearly reached statistical significance (p=0.057). In the male population average values were 5.5 degrees in the ACLR group and 5.9 in the control group. This was not significant (p=0.21). However there was a significant difference (p=0.04) in the female group. ACLR females had higher values 6.5 degrees whereas the control group had average values of 5.2 degrees. Discussion: Increased posterior tibial slope decreases the inclination of the ACL and potentially decreases vector force during dynamic tasks. It may further result in suboptimal length-tension relationships of agonistic muscles, increases in electromechanical delays and result in lower force development further leading to increased vector forces on the ACL. Posterior tibial slope angles were slightly smaller than with other published studies. However by using the posterior tibial cortex as reference an average of 3 degrees must be added to the measured values. We could not confirm the results of previous studies demonstrating an increased degree of posterior tibial slope in ACL injured patients. However we demonstrated a significant difference in tibial slope in females. Based on our results an increased posterior tibial slope is not a risk factor in males but possibly contributes to ACL injuries in females. Increased posterior tibial slope may be one of the reasons why females have a higher incidence of ACL injuries

Aim: To determine the quantity and the quality of the bone bridge between the bone tunnels, in both the femoral and tibial side, after double-bundle anterior cruciate ligament (ACL) reconstruction. Material and methods: Twenty-seven patients undergoing primary double-bundle ACL reconstruction with hamstring tendon autograft were included in this prospective study. Computed tomography (CT) was performed in all patients at a mean of 13 months postoperatively. The amount of the bone bridge between the bone tunnels was measured, in both the femoral and tibial side, on an axial plane at three locations:. at the level of the joint line. at the mid-portion of the bone bridge and. at the base of the bone bridge. In addition, the bone density of the bone bridge was measured in Hounsfield units (HU) in the same locations. Bone density of the anterior tibial cortex lateral femoral condyle, and adjacent cancellous area, and were measured for comparisons. Results: CT confirmed that the bone bridge was triangular in shape in all cases in both the femoral and tibial side. On the femoral side, at the level of joint line (apex of the bone bridge) the mean thickness of the bone bridge was 1.7 mm, at the mid-portion the mean thickness of the bone bridge was 3.7 mm and at the base of the bone bridge the mean thickness was 7.1 mm. On the tibal side, at the level of joint line (apex of the bone bridge) the mean thickness of the bone bridge was 1.5 mm, at the mid-portion the mean thickness of the bone bridge was 3.2 mm and at the base of the bone bridge the mean thickness was 6.5 mm. Bone density at the mid-portion and at the base of the bone bridge was similar to the cancellous bone for both the femoral and tibial side. However, the bone density of the bone bridge, at the level of the joint line, for the femoral side was 860 HU and this was not statistically significant in comparison to the density of the lateral femoral cortex (960 HU). Similarly, the bone density of the bone bridge, at the level of the joint line, for the tibial side was 885 HU and this was not statistically significant in comparison to the density of the anterior tibial cortex (970 HU). Conclusions: Our study demonstrated one year after double-bundle ACL reconstruction the thickness of the triangular bone bridge between the bone tunnels is sufficient at the mid-portion and at the base of the triangle but is thin at the level of the joint line. However, the bone bridge at the apex of the triangle is very strong since its density is similar to that of cortical bone. We believe that the “corticalization” of the bone bridge at the level of the joint line on both the femoral and tibial side is important and contributes significantly to avoid communication of the bone tunnels

The use of autograft bone is the best option when undertaking a procedure that requires bone graft because it is osteogenic, osteoconductive and osseo-inductive. Pain, morbidity and complications associated with harvesting iliac or non-iliac sites occur in between 6% and 30% of cases. An alternative source of graft with possibly a lower morbidity is the intramedullary canal. In this study, 28 patients undergoing 30 arthrodesis procedures on the hindfoot had a mean of 48 cm. 3 . (43 to 50) of bone harvested locally from the hindfoot or the tibial shaft by antegrade or retrograde reaming. No patient sustained a fracture of the calcaneum, talus or tibia. There was no morbidity except for one complication when the reamer breached the medial tibial cortex. This healed uneventfully. . This method of using the reamer–irrigator–aspirator system is an extension of the standard technique of intramedullary reaming of the lower limb: it produces good-quality bone graft with viable growth factors consistent with that of the iliac crest, and donor site morbidity is low. This is an efficient method of obtaining autologous bone for use in arthrodesis of the ankle or hindfoot

Introduction: Unicomparmental knee replacements have a long clinical history of success as well as failure. Recently, in Australia some 40% of knee surgery performed consists of unicompartmental knees for the treatment of medial compartment OA. This increased use of unicompartmental knees is in part due to advances in surgical technique through a minimally invasive approach. Loading conditions at the tibia-implant interface will play an important role in the stress/strain distributions at the proximal tibia. The use of an all PE tibial insert versus a metal backed component may provide a different strain disribution to the proximal tibia. This study examined the influence of metal backed and polyethylene tibial components in unicompartmental knee replacements with and without cement fixation on the initial strain distributions under various loading conditions. Materials and Methods: Three cadaveric tibias (mean age 47 years old) were cleaned of all soft tissue and strain gauged. Rosette strain gauges (TML Ltd., Tokyo, Japan) were placed at 2 levels on the tibial cortex. The intact tibia were embedded in a low melting point alloy at a standard height and tested using an MTS 858 Bionix testing machine (MTS Systems, Min., MI). The tibia were tested in nuetral, varus and valgus positions at zero and sixty degrees of flexion. A 1500N was applied for 15 seconds and the strains measured. A K-Scan sensor (Tekscan, Boston, MA) was used to confirm the varus and valgus loading positions and to obtain a contact footprint and pressure for the intact and reconstructed tibias under the loading conditions (Fig. 1). Following intact testing, the tibias were templated and reconstructed by a surgeon familiar with the technigue. The implants were investigated with and without cement fixation and compared to their respective all polyethylene component if it was available using the same loading regime as the intact tibias. Principal strains were calculated. Results: Tibial cortical strain distributions were significantly different at the proximal and distal sites under the loading conditions examined. The strain distribution for metal backed components was greater than the all PE design. Increasing flexion angle shifted the peak strains posteriorly. Metal backing and all PE tibial inserts presented different strain distributions on the medial side under nuetral and varus loading. Lateral compartment strains did not differ between designs, were higher proximal and decreased dramatically at the distal gauges. Cementless fixation tended to overload compared to the intact condition. Figure 2 presents the strain distribution for a typical metal backed and all poly unicompartmental knee in the nuetral position. Discussion: Metal backed unicompartmental components overloaded the proximal cortex of the tibia. All polyethylene tibial inserts did not overload the proximal cortex and had similar strain distribution to the intact tibia. Cemented fixation allows the transfer of load to the distal tibial cortex via the proximal cortex and subchondral bone, provided that the bone cement has inter-digitised the subchondral bone

Introduction. Mid-flexion stability is believed to be an important factor influencing successful clinical outcomes in total knee arthroplasty. The post of a posterior-stabilizing (PS) knee engages the cam in >60° of flexion, allowing for the possibility of paradoxical mid-flexion instability in less than 60° of flexion. Highly-conforming polyethylene insert designs were introduced as an alternative to PS knees. The cruciate-substituting (CS) knee was designed to provide anteroposterior stability throughout the full range of motion. Methods. As part of a prospective, randomized, five-year clinical trial, we performed quantitative stress x-rays on a total of 65 subjects in two groups (CS and PS) who were more than five years postoperative with a well-functioning total knee. Antero-posterior stability of the knee was evaluated using stress radiographs in the lateral position. A 15 kg force was applied anteriorly and posteriorly with the knee in 45° and 90° of flexion. Measurements of anterior and posterior displacement were made by tracing lines along the posterior margin of the tibial component and the posterior edge of the femoral component, which were parallel to the posterior tibial cortex. (Figures 1–4). Results. In both 45° and 90° of flexion, the PS group demonstrated significantly less total anterior/posterior displacement compared to the CS group, (45°: 7.33 mm vs 12.44 mm, p ≤ 0.0001, 90°: 3.54 mm vs. 9.74 mm, p ≤ 0.0001). (Figures 5,6) The only statistically significant outcomes score difference was seen with the KSS function score in the female subset, with the CS score lower (81.8) compared to the PS score (94.7). (Figure 7) All of the other scores, KSS pain/motion and KSS function scores, as well as the LEAS and FJS scores, were all similar statistically, as was the range of motion and the long axis x-ray alignment. Discussion & Conclusion. The post and cam posterior-stabilized knee has traditionally been thought to be the best choice for providing stability for knee replacement with PCL-insufficiency or sacrifice. However, this difference in stability as measured with stress xrays did not correlate with any detectible differences in any of the clinical outcomes measurements collected (Knee Society Score, Forgotten Joint Score, Lower Extremity Activity Scale) or in the range of motion or coronal alignment, with the exception of the female subgroup KSS function score. In summary, the CS knee demonstrates greater total antero-posterior laxity compared to the PS knee, as measured by stress radiographs, but there is not a strong correlation with clinical outcomes measurements. A greater number of subjects and/or a younger, higher demand population studied with this protocol might produce greater differences in the outcomes, especially in the FJS score. For any figures or tables, please contact the authors directly

Aims

Accurate identification of the ankle joint centre is critical for estimating tibial coronal alignment in total knee arthroplasty (TKA). The purpose of the current study was to leverage artificial intelligence (AI) to determine the accuracy and effect of using different radiological anatomical landmarks to quantify mechanical alignment in relation to a traditionally defined radiological ankle centre.