Thoracic hyperkyphosis (TH – Cobb angle >40°) is correlated with rotator cuff arthropathy and associated with anterior tilting and protraction of scapula, impacting the glenoid orientation and the surrounding musculature. Reverse total shoulder arthroplasty (RTSA) is a reliable surgical treatment for patients with rotator cuff arthropathy and recent literature suggests that patients with TH may have comparable range of motion after RTSA. However, there exists no study reporting the possible link between patient-reported outcomes, humeral retroversion and TH after RTSA. While the risk of post-operative complications such as instability, hardware loosening, scapular notching, and prosthetic infection are low, we hypothesize that it is critical to optimize the biomechanical parameters through proper implant positioning and understanding patient-specific scapular and thoracic anatomy to improve surgical outcomes in this subset of patients with TH. Patients treated with primary RTSA at an academic hospital in 2018 were reviewed for a two-year follow-up. Exclusion criteria were as follows: no pre-existing chest radiographs for Cobb angle measurement, change in post-operative functional status as a result of trauma or medical comorbidities, and missing component placement and parameter information in the operative note. As most patients did not have a pre-operative chest radiograph, only seven patients with a Cobb angle equal to or greater than 40° were eligible. Chart reviews were completed to determine indications for RTSA, hardware positioning parameters such as inferior tilting, humeral stem retroversion, glenosphere size/location, and baseplate size. Clinical data following surgery included review of radiographs and complications. Follow-up in all patients were to a period of two years. The American Shoulder and Elbow Surgeons (ASES) Shoulder Score was used for patient-reported functional and pain outcomes. The average age of the patients at the time of RTSA was 71 years old, with six female patients and one male patient. The indication for RTSA was primarily rotator cuff arthropathy. Possible correlation between Cobb angle and humeral retroversion was noted, whereby, Cobb angle greater than 40° matched with humeral retroversion greater than 30°, and resulted in significantly higher ASES scores. Two patients with mean Cobb angle of 50° and mean humeral retroversion 37.5° had mean ASES scores of 92.5. Five patients who received mean humeral retroversion of 30° had mean lower ASES scores of 63.7 (p < 0 .05). There was no significant correlation with glenosphere size or position, baseplate size, degree of inferior tilting or lateralization. Patient-reported outcomes have not been reported in RTSA patients with TH. In this case series, we observed that humeral stem retroversion greater than 30° may be correlated with less post-operative pain and greater patient satisfaction in patients with TH. Further clinical studies are needed to understanding the biomechanical relationship between RTSA, humeral retroversion and TH to optimize patient outcomes

In multilevel posterior cervical instrumented fusions, extending the fusion across the cervico-thoracic junction at T1 or T2 (CTJ) has been associated with decreased rate of re-operation and pseudarthrosis but with longer surgical time and increased blood loss. The impact on patient reported outcomes (PROs) remains unclear. The primary objective was to determine whether extending the fusion through the CTJ influenced PROs at 3 and 12 months after surgery. Secondary objectives were to compare the number of patients reaching the minimally clinically important difference (MCID) for the PROs and mJOA, operative time duration, intra-operative blood loss (IOBL), length of stay (LOS), discharge disposition, adverse events (AEs), re-operation within 12 months of the surgery, and patient satisfaction. This is a retrospective analysis of prospectively collected data from a multicenter observational cohort study of patients with degenerative cervical myelopathy. Patients who underwent a posterior instrumented fusion of 4 levels of greater (between C2-T2) between January 2015 and October 2020 with 12 months follow-up were included. PROS (NDI, EQ5D, SF-12 PCS and MCS, NRS arm and neck pain) and mJOA were compared using ANCOVA, adjusted for baseline differences. Patient demographics, comorbidities and surgical details were abstracted. Percentafe of patient reaching MCID for these outcomes was compared using chi-square test. Operative duration, IOBL, AEs, re-operation, discharge disposittion, LOS and satisfaction were compared using chi-square test for categorical variables and independent samples t-tests for continuous variables. A total of 206 patients were included in this study (105 patients not crossing the CTJ and 101 crossing the CTJ). Patients who underwent a construct extending through the CTJ were more likely to be female and had worse baseline EQ5D and NDI scores (p> 0.05). When adjusted for baseline difference, there was no statistically significant difference between the two groups for the PROs and mJOA at 3 and 12 months. Surgical duration was longer (p 0.05). Satisfaction with the surgery was high in both groups but significantly different at 12 months (80% versus 72%, p= 0.042 for the group not crossing the CTJ and the group crossing the CTJ, respectively). The percentage of patients reaching MCID for the NDI score was 55% in the non-crossing group versus 69% in the group extending through the CTJ (p= 0.06). Up to 12 months after the surgery, there was no statistically significant differences in PROs between posterior construct extended to or not extended to the upper thoracic spine. The adverse event profile did not differ significantly, but longer surgical time and blood loss were associated with construct extending across the CTJ

Thoracic Outlet Syndrome (TOS) is a complex of symptoms representing neurovascular compression in the supraclavicular area and shoulder girdle. Arterial thoracic outlet syndrome represents only 1% of all TOS's. We present two cases of arterial TOS's following internal fixation of clavicular fractures. Two cases of clavicular fractures managed with internal fixation and subsequently diagnosed with symptomatic, position dependent arterial occlusion are presented. The first case of a 16-year-old male treated with an intramedullary compression screw. He developed symptoms and was diagnosed with TOS using dynamic duplex examination performed by a vascular surgeon. Revision surgery was planned to decompress the subclavian artery from the hypertrophic callus at the fracture site. Before this could be performed the patient re-fractured his clavicle and bent the intramedullary screw. This resulted in resolution of the TOS symptoms. Following this second injury the patient went on to unite the fracture. The second case was of a 48-year-old male. He was initially treated non- operatively until the patient reported sensory and motor disturbances involving the hand and forearm. Excess callus was excised and the fracture was fixed using a locking plate. The symptoms improved, but worsened again eight weeks post operatively. Angiogram revealed vascular occlusion on arm abduction. Repeat surgery was performed in conjunction with a vascular surgeon. The plate was removed, vascular structures were released from fibrous tissue in the region of the fracture, and the posterior edge of the clavicle was debrided with a burr to reduce future impingement on vascular structures. Post operatively the TOS symptoms did not recur. Arterial thoracic outlet syndrome is an uncommon complication of trauma involving the clavicle. It can present in the presence or absence of surgical intervention, but can require surgical intervention to resolve

Introduction:. Trauma is endemic in South Africa. The upper thoracic spine is extremely difficult to image and assess clearly with frontline x-rays resulting in up to 22% of proximal fractures being missed. Aim:. To review a series of patients with proximal thoracic fractures. Methods:. Thirty-three patients with proximal thoracic fractures in the T1–T4 area managed in a spinal unit were identified. A retrospective review of medical records and radiology was undertaken. Demographic data, mechanism of injury, diagnostic modalities, level and type of fracture, neurological status, associated injuries, hospital stay, management, complications and outcome was recorded. Results:. There were 21 males and 12 females, with a median age of 31.8 years. Aetiology was 21 MVA passengers, 8 drivers, 1 pedestrian, 1 assault, 1 bicycle and 1 hanglider accident. Delay in diagnosis was 1 day in 8, 2–5 days in 2 and greater than 2 weeks in 5. The fractures were A1 in 7, A3 in 14, B1 in 7, C1 in 2 and C2 in 2. Twenty three patients had neurological compromise, 13 being complete. Twenty-three had associated chest and head injuries. Hospital stay was a mean of 27 days (maximum 246) and ICU stay median 14 (maximum 115) days. Twenty-six patients underwent surgery, posterior instrumented fusion being the commonest procedure. Although the surgery did not change the median kyphosis (25° preop to 20°at 1 year and 21°at 2 years), the most kyphotic patients were improved (55°to 45°). Conclusion:. A high index of suspicion for proximal thoracic fractures needs to be maintained in high energy injuries, especially MVA passengers, where there is chest injury. Prompt exclusion by appropriate special investigations is mandatory. Once recognized, they can be adequately managed with posterior instrumented fusion, although these patients are resource intensive due to the associated neurological impairment and chest injuries

Aim:. Historically, anterior decompression followed by posterior fusion has been the surgical management of choice in spinal tuberculosis. Due to theatre time being at a premium, we have evolved to performing anterior only debridement, allograft strut reconstruction and instrumentation for tuberculosis in the adult thoracic spine. The aim of this study is to review the safety and the efficacy of this treatment. Methods:. Twenty-eight adult thoracic tuberculosis patients were identified where anterior only surgery had been performed. These were all in the mid-thoracic spine as circumferential surgery is still favoured in thoracolumbar disease. The surgery was performed by a single surgeon at a tertiary hospital. Following transthoracic aggressive debridement, allograft humeral shafts were cut to size and inserted under compression and the spines instrumented with the use of screw-rod constructs into the body above and below. A retrospective review of clinical notes and radiological studies was performed. Results:. Twenty-seven of the patients presented with altered neurology; 2 had only sensory changes while 25 presented with paraparesis; 22 of these patients were unable to walk. The average surgical time was 2 hours 20 minutes with a median blood loss of 726 ml. The majority of patients had 2 vertebral bodies involved and required an average of a 4 body fusion. Surgical complications included inadvertent opening of the diaphragm in 1 patient and 1 patient deteriorated neurologically post operatively. 21 of 28 patients recovered to independent mobility at their latest follow-up appointment. 1 patient showed no recovery, 3 had some motor recovery that was not useful, 1 had some sensory but no motor recovery. 16 of 28 patients have documented bony fusion with no evidence of instrumentation failure in any patients. Conclusion:. Anterior only debridement, allograft strut reconstruction and instrumented fusion for the treatment of thoracic spinal tuberculosis is a safe and effective alternative to circumferential surgery in the adult patient

Hemorrhage and transfusion requirements in spine surgery are common. This is especially true for thoracic and lumbar fusion surgeries. The purpose of this papersi to determine predictive factors for transfusion and their effect on short-term post-operative outcomes for thoracic and lumbar fusions. The American College of Surgeons National Surgical Quality Improvement Program (ACS-NSQIP) database was used to identify patients that underwent lumbar or thoracic fusion surgery from 2010 to 2013. Univariate and multivariate regression analysis was used to determine predictive factors and post-operative complications associated with transfusion. A total of 14,249 patients were included in this study; 13,586 had lumbar fusion and 663 had thoracic fusion surgery. The prevalence of transfusion was 35% for thoracic fusion and 17.5% for lumbar fusion. The multivariate analysis showed that age between 50–60 (OR 1.38, CI: 1.23–1.54), age between 61–70 (OR 1.65, CI: 1.40–1.95), dyspnea (OR 1.11, CI: 1.02–1.23), hypertension (OR 1.14, CI: 1.02–1.27), ASA class (OR 1.73, 1.18–1.45), pre-operative blood transfusion (OR 1.91, CI: 1.04–3.49), and extended surgical time (OR 4.51, CI: 4.09–4.98) were predictors of blood transfusion requirements for lumbar fusion. While only pre-operative BUN (OR 1.04, CI: 1.01–1.06) and extended surgical time (OR 4.70, CI: 3.12–6.96) were predictors of transfusion for thoracic fusion. In contrast, higher pre-operative hematocrit was protective against transfusion. Patients transfused who underwent lumbar fusion had an increased risk to develop superficial wound infection, deep wound infection, venous thromboembolism, myocardial infarction and had longer length of hospital stay. Patients transfused who underwent thoracic fusion were more likely to have venous thromboembolism and extended length of hospital stay. However, mortality was not associated with blood transfusion. This study used a large database to characterise the incidence, predictors and post-operative complications associated with blood transfusion in thoracic and lumbar fusion surgeries. Pre- and post-operative planning for patients deemed to be at high-risk of requiring blood transfusion should be considered to reduce post-operative complication in this population

We prospectively studied the use of intercostal EMG monitoring as an indicator of the accuracy of the placement of pedicle screws in the thoracic spine. We investigated 95 thoracic pedicles in 17 patients. Before insertion of the screw, the surgeon recorded his assessment of the integrity of the pedicle track. We then stimulated the track using a K-wire pedicle probe connected to a constant current stimulator. A compound muscle action potential (CMAP) was recorded from the appropriate intercostal or abdominal muscles. Postoperative CT was performed to establish the position of the screw. The stimulus intensity required to evoke a muscle response was correlated with the position of the screw on the CT scan. There were eight unrecognised breaches of the pedicle. Using 7.0 mA as a threshold, the sensitivity of EMG was 0.50 in detecting a breached pedicle and the specificity was 0.83. Thoracic pedicle screws were accurately placed in more than 90% of patients. EMG monitoring did not significantly improve the reliability of placement of the screw

The posterior midline approach used in spinal surgery has been associated with a significant rate of wound dehiscence. This study investigates anatomical study of the arterial supply of the cervical and thoracic spinal muscles and overlying skin at each vertebral level. It aimed to provide possible anatomical basis for such wound complications. A dissection and angiographic study was undertaken on 8 cadaveric neck and posterior torso from 6 embalmed and 2 fresh human cadavers. Harvested cadavers were warmed and hydrogen peroxide was injected into the major arteries. Lead oxide contrast mixture was injected in stepwise manner into the subclavian and posterior intercostal arteries of each specimen. Specimens were subsequently cross-sectioned at each vertebral level and bones elevated from the soft tissue. Radiographs were taken at each stage of this process and analysed. The cervical paraspinal muscles were supplied by the deep cervical arteries, transverse cervical arteries and vertebral arteries. The thoracic paraspinal muscles were supplied by the superior intercostal arteries, transverse cervical arteries and posterior intercostal arteries. In the thoracic region, two small vessels provide the longitudinal connection between the segmental arteries and in the cervical region, deep cervical arteries provide such connection from C3 to C6. The arterial vessels supplying the paraspinal muscles on the left and right side anastomose with each other, posterior to the spinous processes in all vertebral levels. At cervical vertebral levels, source arteries travel near the surgical field and are not routinely cauterised; Haematoma is postulated to be the cause of wound complications. At thoracic levels, source arteries travel in the surgical field and tissue ischemia is a contributing factor to wound complications, especially in operations over extensive levels. Post-operative wound complications is a multi-factorial clinical problem, the anatomical findings in this study provide possible explanations for wound dehiscence in the posterior midline approach. It is postulated that drain tubes may reduce the incidence of haematoma in the cervical level

Introduction. There are controversies in the literature about thoracoplasty and its effect on lung function changes. The aim of the study was to evaluate the effect and outcome of thoracoplasty in conjunction with pedicle screw construct in the treatment of thoracic adolescent idiopathic scoliosis on lung functions. Materials and methods. It is a retrospective study of consecutive series of 62 patients with thoracic adolescent idiopathic scoliosis surgically treated by single surgeon between 2007 and 2008 at a tertiary referral Orthopaedic Spinal unit. Posterior spinal fusion and thoracoplasty (n=32, all but one girls) were compared with 30 without thoracoplasty (all but one girls). Clinical and radiographic analysis was performed, including the SRS-30 questionnaire and Pulmonary Function Tests (PFT). Absolute and percent-predicted values of forced expiratory volume in 1 second (FEV1), forced vital capacity (FVC), and total lung capacity (TLC) were evaluated preoperatively and at 3-months, 1 year and/or 2-year follow-up, and comparisons were made between two groups. The minimum follow-up was one year. Results. No statistical differences were found between the two groups in PFT's both pre-operatively and at latest follow up ranging 1 to 3 years. Our findings suggest that thoracoplasty did not adversely affected long-term PFT's in AIS patients compared to patients treated by posterior spinal fusion alone. Three-month postoperative pulmonary function test values in both groups experienced 15–30% decline which returned to the preoperative baseline at 1 year in > 90% patients. In thoracoplasty group, 5 to 8 ribs were resected and used for bone graft. Chest complications were observed in 2 patients requiring chest drainage. Prolonged donor site morbidity was noted in 3 patients. Conclusions. Thoracoplasty showed comparable clinical and radiological correction without any significant pulmonary function compromise. Pulmonary function test values returned to the preoperative baseline at 1 year in > 90% patients

Summary. Optimum position of pedicle screws can be determined preoperatively by CT based planning. We conducted a comparative study in order to analyse manually determined pedicle screw plans and those that were obtained automatically by a computer software and found an agreement in plans between both methods, yet an increase in fastening strengths was observed for automatically obtained plans. Hypothesys. Automatic planning of pedicle screw positions and sizing is not inferior to manual planning. Design. Prospective comparative study. Introduction. Preoperative planning in spinal deformity surgery starts by a proper selection of implant anchors throughout the instrumented spine, where pedicle screws provide the optimum choice for bone fixation. In the case of severe spinal deformities, dysplastic pedicles can limit screw usage, and therefore studying the anatomy of vertebrae from preoperative images can aid in achieving the safest screw position through optimal fastening strength. The purpose of this study is to compare manually and automatically obtained preoperative pedicle screw plans. Materials and Methods. CT scans of 17 deformed thoracic spines were studied by two experienced spine deformity surgeons, who placed 316 pedicle screws in 3D using a software positioning tool by aiming for the safest trajectory that permitted the largest possible screw sizes. The resulting manually obtained screw sizes, trajectory angles, entry points and normalised fastening strengths were compared to those obtained automatically by a dedicated computer software that, basing on vertebral anatomy and bone density in 3D, determined optimal screw sizes and trajectories. Results. Statistically significant differences were observed between manually and automatically obtained plans for screw sizes (p < 0.05) and trajectory angles (p < 0.001). However, for automatically obtained plans, screws were not smaller in diameter (p < 0.05) or shorter in length (p < 0.001), while screw normalised fastening strengths were higher (p < 0.001). Conclusions. In comparison to manual planning, automatically obtained plans did not result in smaller screw diameters or shorter screw lengths, which is in agreement with the definition of the pull-out strength, but in different screw trajectory angles, which is reflected by higher normalised fastening strengths. Captions. Fig. 1. Visual comparison among automatically obtained (green colour) and manually defined pedicle screw placement plans by two experienced spine surgeons (red and blue colour) for three different patients with adolescent idiopathic scoliosis, shown from top to bottom in a three-dimensional view, left sagittal, right sagittal and coronal view. Fig. 2. Histograms of differences between observers and (left column), between observer and automated method (middle column), and between observer and automated method (right column), shown from top to bottom for differences in pedicle screw pedicle screw diameter, sagittal inclination, and normalised fastening strength. For figures/tables, please contact authors directly.

Introduction. Luk (Luk et al. Spine vol 23(21) 2303-2307 1998) has shown that in posterior surgery, the correction achieved can be predicted by fulcrum bending films. The relevance to anterior correction has been disputed, as this commonly involves shortening the spine by the removal of intervertebral discs. The aim of the study was to see whether the pre-operative bending angle reflected the degree of correction achieved. Method. 91 patients with a structural thoracic curve had an anterior endoscopic correction using a single rod. The mean age was 16.1 years. (range 10-46) The majority of curves were Lenke type 1 (79%) or Type 2 (8%). In all cases disc clearance and bone grafting were performed. All had pre-operative fulcrum bending films. The mean Cobb angle achieved at the pre-operative bending film was compared with the post-operative correction at 2 months. The FBCI (Fulcrum Bending Correction Index) and correction rates were also calculated. The FBCI is calculated by dividing the correction rate by the fulcrum flexibility and expressed as a percentage. It takes into account the pre-operative flexibility of the curve. Results. The mean Cobb angle achieved at the pre-operative bending film was 20.4 degrees. The mean Cobb angle of the corrected curve at 2 months following surgery was 20.4 degrees, (p=0.96). The mean FBCI was 107%. The overall correction rate was 60.1%. Conclusion. In our series fulcrum bending films have been highly predictive of the correction achieved following anterior endoscopic correction. The correction rate of 60.1% is in keeping with other series. In addition, the FBCI was 107%. The instrumentation had corrected to the flexibility achieved at the time of the pre-operative bending films. This implies that the discectomies performed at time of surgery had not significantly increased the correction achieved

Thoracic kyphosis increases with age. The resultant increase in compression forces on the anterior vertebral bodies leads to further kyphotic deformity and, an increased likelihood of vertebral collapse. This study aimed to determine the relative efficacy of two therapeutic strategies commonly used to treat hyperkyphosis. 69 subjects (26 male: 43 female) were randomised into 4 groups: strengthening, postural re-education (PEd), both and control. The strengthening group attended a gym 3 times a week for 12 weeks to perform seated extension exercises. The PEd group had 3 physiotherapy sessions within a 12 week period in which they received postural assessment and a home exercise programme. The combined group received both interventions while the control group received neither. Outcome measurements were assessed at baseline and 12 weeks. They included static (inclinometer) and 6-hour angular measurements (using flexible electrogoniometer (FEG)) and physical function tests. There were no significant differences between the marginal means of the angular measurements for any of the intervention groups. However, the group which received both interventions demonstrated reduced kyphosis as measured by the FEG angles (apex of the curve between T3 and T11), while the strengthening group showed reduced inclinometer angles (between T1 and T12). The strengthening group showed improvement in back extensor strength (BES) (0.6 +/− 0.2 N/kg, p < 0.01), time to walk 10 metres (−0.3 +/− 0.6 s, p < 0.05), and time to stand and sit 5 times (−0.9 +/− 0.6 s, p < 0.05). However, there was no relationship between change in BES and change in kyphotic angle. The PEd group showed the greatest improvement in the timed up and go test but this was not significant. Improvement in inclinometer angle over the 12 weeks was associated with degree of kyphosis at baseline (upright inclinometer r = −0.47, p=0.0001) but this relationship was not apparent in the FEG measurements. Both the FEG and inclinometer angles showed a marked decrease in degree of improvement in subjects aged >70. (50/50). A combination of strengthening and PEd was most effective at reducing hyperkyphosis. BES was improved with resisted strengthening but not with home-based postural exercises. However, increased BES was not associated with decreased kyphosis. Larger baseline kyphosis was associated with greater angular improvement. Subjects aged >70 were less likely to improve

The use of cervical pedicle screws as anchors in posterior reconstruction surgery has not been widely accepted due to the neurological or vascular injury. We thus sought to investigate the accuracy of free-handed pedicle screw placement in the cervical and upper thoracic spine at the early stage of clinical application. Eight patients (five males and three females) were included in this study. Mean age was 63 years (31 to 78 years). There were three patients with rheumatoid arthritis, three with cervical fracture-dislocation, and two with spinal metastasis. Twenty-four pedicle screws (3.5 mm diameter: Vertex, Medtronic Sofamordanek) were placed into the pedicle from C2 to T2 level by free-handed technique2). Grade of breaching of pedicle cortex was divided into four groups (Grade 0–3). In addition, screw axis angle (SAA) were calculated from the horizontal and sagittal CT images and compared with pedicle transverse angle (PTA). Furthermore, perioperative complications were also examined. Our free-handed pedicle screw placement with carving technique is as follows: A longitudinal gutter was created at the lamina-lateral mass junction and then transverse gutter perpendicular to the longitudinal gutter was made at the lateral notch of lateral mass. The entry point of the pedicle screw was on the midline of lateral mass. Medial pedicle cortex through the ventral lamina was identified using the probes to create the hole within the pedicle. The hole was tapped and the screw was gently introduced into the pedicle to ensure the sagittal trajectory using fluoroscopy. In the transverse direction, 22 out of 24 screws (92%) were entirely contained within the pedicle (Grade 0). In contrast, only teo screws (8%) produced breaches less than half the screw diameter (Grade 1). In the sagittal direction, all screws were within the pedicle (Grade 0). Screw trajectories were not consistent with anatomical pedicle axis angle; the mean SAA were smaller than the mean PTA at all levels. The pedicle diameter ranged from 3.9 to 9.2 mm. The mean value gradually increased toward the caudal level. There were no neurological and vascular complications related to screw placement

Adolescent idiopathic scoliosis is a three-dimensional deformity of the spine, affecting 1–3% of the population. Most cases are treated conservatively. Curves exceeding 45° in the thoracic spine and 40° in the lumbar spine may require correction and fusion surgery, to limit the progression of the curve and prevent restrictive pulmonary insufficiency (curves above 70°). When fusion is required, it may be performed either by posterior or anterior approaches. Posterior is useful for thoracic (Lenke I) curves, notably to correct the thoracic hypokyphosis frequently observed in AIS. Anterior approaches by thoraco-lombotomies allow an effective correction of thoraco-lumbar and lumbar curves (Lenke V and VI), with fewer levels fused than with posterior approaches. However, the approach requires diaphragm splitting and one may be concerned about the long-term pulmonary consequences. The literature provides conflicting insight regarding the consequences of the approach in anterior scoliosis correction, the interpretation of the results being difficult knowing that the correction of the scoliosis itself may improve pulmonary function. This is a retrospective observational study done at a Tertiary Institution. The HRQOL scores have been collected as a prospective cohort. Clinical and radiographic data was collected from patients charts and analysed by two senior surgeons. A cohort of 64 patients were operated in the given time period. 50 patients met the inclusion criteria. No major complications were reported. The Union rate was 100% and no post operative complications were noted. Pre and post SRS scores improved in all patients. The Anterior approach for Lenke V AIS gives great surgical exposure and allows for excellent correction of Cobb angle with minimal risk to the patient

Clinically significant proximal junctional kyphosis (PJK) occurs in 20% of children treated with posterior distraction-based growth friendly surgery. In an effort to identify modifiable risk factors, it has been theorized biomechanically that low radius of curvature (ROC) implants (i.e., more curved rods) may increase post-operative thoracic kyphosis, and thus may pose a higher risk of developing PJK. We sought to test the hypothesis that EOS patients treated with low ROC (more curved rods) distraction-based treatment will have a greater risk of developing PJK as compared to those treated with high ROC (straighter) implants. This is a retrospective review of prospectively collected data obtained from a multi-centre EOS database on children treated with rib-based distraction with minimum 2-year follow-up. Variables of interest included: implant ROC at index (220 mm or 500 mm), patient age, pre-operative scoliosis, pre-operative kyphosis, and scoliosis etiology. In the literature, PJK has been defined as clinically significant if revision surgery with superior extension of the upper instrumented vertebrae was performed. In 148 scoliosis patients, there was a higher risk of clinically significant PJK with low ROC (more curved) rods (OR: 2.6 (95%CI 1.09-5.99), χ2 (1, n=148) = 4.8, p = 0.03). Patients had a mean pre-operative age of 5.3 years (4.6y 220 mm vs 6.2y 500 mm, p = 0.002). A logistic regression model was created with age as a confounding variable, but it was determined to be not significant (p = 0.6). Scoliosis etiologies included 52 neuromuscular, 52 congenital, 27 idiopathic, 17 syndromic with no significant differences in PJK risk between etiologies (p = 0.07). Overall, patients had pre-op scoliosis of 69° (67° 220mm vs 72° 500mm, p = 0.2), and kyphosis of 48° (45° 220mm vs 51° 500mm, p = 0.1). The change in thoracic kyphosis pre-operatively to final follow up (mean 4.0 ± 0.2 years) was higher in patients treated with 220 mm implants compared to 500 mm implants (220 mm: 7.5 ± 2.6° vs 500 mm: −4.0 ± 3.0°, p = 0.004). Use of low ROC (more curved) posterior distraction implants is associated with a significantly greater increase in thoracic kyphosis which likely led to a higher risk of developing clinically-significant PJK in EOS patients

Hip instability is one of the most common causes for total hip arthroplasty (THA) revision surgery. Studies have indicated that lumbar fusion (LF) surgery is a risk factor for hip dislocation. Instrumented spine fusion surgery decreases pelvic tilt, which might lead to an increase in hip motion to accommodate this postural change. To the best of our knowledge, spine-pelvis-hip kinematics during a dynamic activity in patients that previously had both a THA and LF have not been investigated. Furthermore, patients with a combined THA and LF tend to have greater disability. The purpose was to examine spine-pelvis-hip kinematics during a sit to stand task in patients that have had both THA and LF surgeries and compare it to a group of patients that had a THA with no history of spine surgery. The secondary purpose was to compare pain, physical function, and disability between these patients. This cross-sectional study recruited participants that had a combined THA and LF (n=10; 6 females, mean age 73 y) or had a THA only (n=11; 6 females, mean age 72 y). Spine, pelvis, and hip angles were measured using a TrakSTAR motion capture system sampled at 200 Hz. Sensors were mounted over the lateral thighs, base of the sacrum, and the spinous process of the third lumbar,12th thoracic, and ninth thoracic vertebrae. Participants completed 10 trials of a standardized sit-to-stand-to-sit task. Hip, pelvis, lower lumbar, upper lumbar, and lower thoracic sagittal joint angle range of motion (ROM) were calculated over the entire task. In addition, pain, physical function, and disability were measured with clinical outcomes: Hip Disability Osteoarthritis Outcome Score (pain and physical function), Oswestry Low Back Disability Questionnaire (disability), and Harris Hip Score (pain, physical function, motion). Physical function performance was measured using 6-Minute Walk Test, Stair Climb Test, and 30s Chair Test. Angle ROMs during the sit-to-stand-to-sit task and clinical outcomes were compared between THA+LF and THA groups using independent t-tests and effect sizes (d). The difference in hip ROM was approaching statistical significance (p=0.07). Specifically, the THA+LF group had less hip ROM during the sit-to-stand-to-sit task than the THA only group (mean difference=11.17, 95% confidence interval=-1.13 to 23.47), which represented a large effect size (d=0.83). There were no differences in ROM for pelvis (p=0.54, d=0.28) or spinal (p=0.14 to 0.97; d=0.02 to 0.65) angles between groups. The THA+LF group had worse clinical outcomes for all measures of pain, physical function, and disability (p=0.01 to 0.06), representing large effect sizes (d=0.89 to 2.70). Hip ROM was not greater in the THA+LF group, and thus this is unlikely a risk factor for hip dislocation during this specific sit-to-stand-to-sit task. Other functional tasks that demand greater excursions in the joints should be investigated. Furthermore, the lack of differences in spinal and pelvis ROM were likely due to the task and the THA+LF group had spinal fusions at different levels. Combined THA+LF results in worse clinical outcomes and additional rehabilitation is required for these patients

Adolescent idiopathic scoliosis (AIS) is a complex three-dimensional deformity of the spine characterized by a Cobb angle of at least 10 degrees. The goal of surgery is to not only prevent progression but restore sagittal and coronal balance, protecting cardiopulmonary function and improving cosmesis. We reviewed the impact of deformity correction surgery in terms of radiology and patient reported outcome(PROMs). The senior authors prospectively maintained database from 2003 –2022 was retrospectively analysed in terms of pre- and post-operative patient reported outcome measures (SRS 22) as well as radiological parameters. 44 patients with AIS were identified with pre and post op PROMS. The average age at surgery was 15yrs with 84% female. 38% had a Lenke 1 curve and 3 patients had Lenke 6 curves. 73% had posterior surgery. There was a total improvement in SRS 22 scores by 7.8%. Patients reported significant satisfaction with treatment 4.8/5 and improvement in self-image with a change of 0.4 (p<0.001). However, no difference in function, pain and mental health were recorded. Overall, proximal thoracic (PT) curves improved from 24 degrees to 11 degrees (p<0.001), Main thoracic (MT) curve 55 degrees to 19 degrees and Thoracolumbar/Lumbar curves (TL/L) 45 degreesto 11 degrees. Pre-operative flexibility and post-operative correction were 0.40 and 0.41 respectively for PT curve. MT was 0.32 and 0.67. That for TL/L was 0.57 and 0.71 respectively. Surgery yields significant main curve correction correlating with high patient reported satisfaction rate. Although total SRS 22 score yielded 7.8% improvement, sub-analysis of self-image showed the most significant improvement

Acute spinal cord injury (SCI) is most often secondary to trauma, and frequently presents with associated injuries. A neurological examination is routinely performed during trauma assessment, including through Advanced Trauma Life Support (ATLS). However, there is no standard neurological assessment tool specifically used for trauma patients to detect and characterize SCI during the initial evaluation. The International Standards for Neurological Classification of Spinal Cord Injury (ISNCSCI) is the most comprehensive and popular tool for assessing SCI, but it is not adapted to the acute trauma patients such that it is not routinely used in that setting. Therefore, the objective is to develop a new tool that can be used routinely in the initial evaluation of trauma patients to detect and characterize acute SCI, while preserving basic principles of the ISNCSCI. The completion rate of the ISCNSCI during the initial evaluation after an acute traumatic SCI was first estimated. Using a modified Delphi technique, we designed the Montreal Acute Classification of Spinal Cord Injuries (MAC-SCI), a new tool to detect and characterize the completeness (grade) and level of SCI in the polytrauma patient. The ability of the MAC-SCI to detect and characterize SCI was validated in a cohort of 35 individuals who have sustained an acute traumatic SCI. The completeness and neurological level of injury (NLI) were assessed by two independent assessors using the MAC-SCI, and compared to those obtained with the ISNCSCI. Only 33% of patients admitted after an acute traumatic SCI had a complete ISNCSCI performed at initial presentation. The MAC-SCI includes 53 of the 134 original elements of the ISNCSCI which is 60% less. There was a 100% concordance between the severity grade derived from the MAC-SCI and from the ISNCSCI. Concordance of the NLI within two levels of that obtained from the ISNCSCI was observed in 100% of patients with the MAC-SCI and within one level in 91% of patients. The ability of the MAC-SCI to discriminate between cervical (C0 to C7) vs. thoracic (T1 to T9) vs. thoraco-lumbar (T10 to L2) vs. lumbosacral (L3 to S5) injuries was 100% with respect to the ISNCSCI. The rate of completion of the ISNCSCI is low at initial presentation after an acute traumatic SCI. The MAC-SCI is a streamlined tool proposed to detect and characterize acute SCI in polytrauma patients, that is specifically adapted to the acute trauma setting. It is accurate for determining the completeness of the SCI and localize the NLI (cervical vs. thoracic vs. lumbar). It could be implemented in the initial trauma assessment protocol to guide the acute management of SCI patients

Acute spinal cord injury (SCI) is most often secondary to trauma, and frequently presents with associated injuries. A neurological examination is routinely performed during trauma assessment, including through Advanced Trauma Life Support (ATLS). However, there is no standard neurological assessment tool specifically used for trauma patients to detect and characterize SCI during the initial evaluation. The International Standards for Neurological Classification of Spinal Cord Injury (ISNCSCI) is the most comprehensive and popular tool for assessing SCI, but it is not adapted to the acute trauma patients such that it is not routinely used in that setting. Therefore, the objective is to develop a new tool that can be used routinely in the initial evaluation of trauma patients to detect and characterize acute SCI, while preserving basic principles of the ISNCSCI. The completion rate of the ISCNSCI during the initial evaluation after an acute traumatic SCI was first estimated. Using a modified Delphi technique, we designed the Montreal Acute Classification of Spinal Cord Injuries (MAC-SCI), a new tool to detect and characterize the completeness (grade) and level of SCI in the polytrauma patient. The ability of the MAC-SCI to detect and characterize SCI was validated in a cohort of 35 individuals who have sustained an acute traumatic SCI. The completeness and neurological level of injury (NLI) were assessed by two independent assessors using the MAC-SCI, and compared to those obtained with the ISNCSCI. Only 33% of patients admitted after an acute traumatic SCI had a complete ISNCSCI performed at initial presentation. The MAC-SCI includes 53 of the 134 original elements of the ISNCSCI which is 60% less. There was a 100% concordance between the severity grade derived from the MAC-SCI and from the ISNCSCI. Concordance of the NLI within two levels of that obtained from the ISNCSCI was observed in 100% of patients with the MAC-SCI and within one level in 91% of patients. The ability of the MAC-SCI to discriminate between cervical (C0 to C7) vs. thoracic (T1 to T9) vs. thoraco-lumbar (T10 to L2) vs. lumbosacral (L3 to S5) injuries was 100% with respect to the ISNCSCI. The rate of completion of the ISNCSCI is low at initial presentation after an acute traumatic SCI. The MAC-SCI is a streamlined tool proposed to detect and characterize acute SCI in polytrauma patients, that is specifically adapted to the acute trauma setting. It is accurate for determining the completeness of the SCI and localize the NLI (cervical vs. thoracic vs. lumbar). It could be implemented in the initial trauma assessment protocol to guide the acute management of SCI patients

Acute spinal cord injury (SCI) is most often secondary to trauma, and frequently presents with associated injuries. A neurological examination is routinely performed during trauma assessment, including through Advanced Trauma Life Support (ATLS). However, there is no standard neurological assessment tool specifically used for trauma patients to detect and characterize SCI during the initial evaluation. The International Standards for Neurological Classification of Spinal Cord Injury (ISNCSCI) is the most comprehensive and popular tool for assessing SCI, but it is not adapted to the acute trauma patients such that it is not routinely used in that setting. Therefore, the objective is to develop a new tool that can be used routinely in the initial evaluation of trauma patients to detect and characterize acute SCI, while preserving basic principles of the ISNCSCI. The completion rate of the ISCNSCI during the initial evaluation after an acute traumatic SCI was first estimated. Using a modified Delphi technique, we designed the Montreal Acute Classification of Spinal Cord Injuries (MAC-SCI), a new tool to detect and characterize the completeness (grade) and level of SCI in the polytrauma patient. The ability of the MAC-SCI to detect and characterize SCI was validated in a cohort of 35 individuals who have sustained an acute traumatic SCI. The completeness and neurological level of injury (NLI) were assessed by two independent assessors using the MAC-SCI, and compared to those obtained with the ISNCSCI. Only 33% of patients admitted after an acute traumatic SCI had a complete ISNCSCI performed at initial presentation. The MAC-SCI includes 53 of the 134 original elements of the ISNCSCI which is 60% less. There was a 100% concordance between the severity grade derived from the MAC-SCI and from the ISNCSCI. Concordance of the NLI within two levels of that obtained from the ISNCSCI was observed in 100% of patients with the MAC-SCI and within one level in 91% of patients. The ability of the MAC-SCI to discriminate between cervical (C0 to C7) vs. thoracic (T1 to T9) vs. thoraco-lumbar (T10 to L2) vs. lumbosacral (L3 to S5) injuries was 100% with respect to the ISNCSCI. The rate of completion of the ISNCSCI is low at initial presentation after an acute traumatic SCI. The MAC-SCI is a streamlined tool proposed to detect and characterize acute SCI in polytrauma patients, that is specifically adapted to the acute trauma setting. It is accurate for determining the completeness of the SCI and localize the NLI (cervical vs. thoracic vs. lumbar). It could be implemented in the initial trauma assessment protocol to guide the acute management of SCI patients