Aims

This study aims to assess the relationship between history of pseudotumour formation secondary to metal-on-metal (MoM) implants and periprosthetic joint infection (PJI) rate, as well as establish ESR and CRP thresholds that are suggestive of infection in these patients. We hypothesized that patients with a pseudotumour were at increased risk of infection.

Introduction. Pseudotumors have been reported following metal-on-metal total hip arthroplasty (THA); however, the natural history and longitudinal imaging findings of pseudotumors have yet to be fully analyzed. Our hypothesis was that pseudotumor size might change over time following metal-on-metal THA. This hypothesis was studied longitudinally using magnetic resonance imaging (MRI). Materials and Methods. Screening for pseudotumors was performed using MRI after large-diameter metal-on-metal THA. Initial MRI was conducted at a mean of 36 months postoperatively. Follow-up MRI was performed at a mean of 20 months after the detection of 24 pseudotumors in 20 asymptomatic patients. Pseudotumors were classified as cystic, solid, and mixed types. Fourteen hips were characterized as cystic type and 10 hips were defined as mixed type. There were three men and 17 women with a mean age of 63 years. Pseudotumor size was determined on MRI by manually outlining the greatest size of the mass. Serum cobalt and chromium ion levels were measured in nine patients with unilateral THA at the time of MRI. Statistical analysis was performed using the Kruskal-Wallis test and chi square test to compare age, gender, BMI, head diameter, cup inclination, cup anteversion, and pseudotumor type among changes of pseudotumor size. We compared the pseudotumor size for the three groups (increase in size, no change, decrease in size) using Kruskal-Wallis test and Mann-Whitney U test. Wilcoxon signed-rank test was used to compare median serum metal ion levels over time. A p value < 0.05 was considered significant. This study was approved by the ethics committee of our institution, and all patients provided informed consent. Results. The mean pseudotumor size changed from 729 mm. 2. to 877 mm. 2. Among the 24 hips, pseudotumors increased in size (Fig. 1) in eight (three cystic and five mixed) and decreased in size in six (four cystic and two mixed). Ten hips showed no changes in size (seven cystic and three mixed). We found no significant differences between changes of pseudotumor size and patient characteristics. The mean initial size of pseudotumor was bigger in pseudotumors with increased in size (1002 ± 309 mm. 2. ) than in those with decreased in size (542 ± 295 mm. 2. , p = 0.020) or no change (622 ± 448 mm. 2. , p = 0.041). The median cobalt ion levels at initial MRI and follow-up MRI were 2.0 µg/L and 1.8 µg/L, respectively. The median chromium ion levels at initial MRI and follow-up MRI were 2.0 µg/L and 3.1 µg/L, respectively. No significant differences were observed between the levels of either metal at initial and subsequent MRI. Conclusions. The present results suggest that pseudotumors frequently change in size in asymptomatic patients, and our hypothesis was verified. The initial size of pseudotumor was bigger in pseudotumors with increased in size than in those with decreased in size or no change. And we might predict that bigger pseudotumors would tend to increase in size

Background:. Metal-on-metal total hip arthroplasty (THA) implants have been widely debated due to the adverse wear issue related to the bearing surfacing. However, more recent studies have shown that the high metal ion problems that occur after surgery with this type of implant may not be exclusively related to the all metal bearing surfaces, but mainly due to the recently modified connecting tapers. Biomet is one of few companies who have not changed their original taper design for their THA implants. The purpose of this study was to present our up to eight-year clinical results. Method:. Between November 2004 and April 2011, all of the 196 cases in 167 patients (77 male vs. 89 female) performed by a single surgeon were included in this study. The Biomet Magnum/Jumbo metal-on-metal total hip arthroplasty implants were utilized for all of the cases. The average age was 59 ± 11 years at the time of surgery. Thirteen patients deceased from causes unrelated to THA. The primary diagnosis was OA in 124 cases; followed by AVN in 41 cases, dysplasia in 12 cases and other causes in the remaining 19 cases. The average acetabular component sizes were 54 ± 4 mm. Clinical and radiographic examinations were performed prospectively, and the results were analyzed. Results:. The mean duration of follow-up was 5 ± 2 years. There were four revisions: 1) one was due to an adverse wear issue with a cobalt level of 109 μg/l and a chromium level of 77 μg/l. The primary diagnosis was OA for this case. The acetabular inclination angle was 65°. The acetabular component was revised using the Biomet Magnum Tri-Spike component with the acetabular inclination angle of 41°; one year after the surgery, the metal ion level results showed a cobalt level of 2.4 μg/l and a chromium level of 9.7 μg/l with a Harris hip score of 100. This patient also has a total knee replacement on the same side. 2) one due to acetabular component loosening; the HHS was 100 two years after the revision 3) twodue to deep infection; the HHS was 93 at one year and 100 atbthree years after the revision correspondingly. The metal ion results were available for 114 patients at the time of this study. Four patients had metal ion levels ≥ 7 μg/l; three out of these four patients' levels were ≥10 μg/l and one out of these four had levels ≥15 μg/l. Using failure of any component as the end point, the Kaplan-Meier Survival rate was 99.5% at five years and 96.7% at eight years for the whole group. Conclusions:. This study suggests that Biomet metal-on-metal THA showed a high success rate with a low adverse wear rate. Our clinical results may suggest that all metal bearing surfaces may not be the key to the recent adverse wear issue. The surgical technique and taper problems in other implants may be the major causes. Further studies need to confirm our results

Aims. Metal-on-metal total hip replacements (MoM THRs) are frequently revised. However, there is a paucity of data on clinical outcomes following revision surgery in this cohort. We report on outcomes from the largest consecutive series of revisions from MoM THRs and consider pre-revision factors which were prognostic for functional outcome. Materials and Methods. A single-centre consecutive series of revisions from MoM THRs performed during 2006–2015 was identified through a prospectively maintained, purpose-built joint registry. The cohort was subsequently divided by the presence or absence of symptoms prior to revision. The primary outcome was functional outcome (Oxford Hip Score (OHS)). Secondary outcomes were complication data, pre- and post-revision serum metal ions and modified Oxford classification of pre-revision magnetic resonance imaging (MRI). In addition, the study data along with demographic data was interrogated for prognostic factors informing on post-revision functional outcome. Results. 180 revisions in 163 patients were identified at a median follow-up of 5.48 (2–11.7) years. There were 152 (84.4%) in the symptomatic subgroup and 28 (15.6%) in the asymptomatic group. Overall median OHS improved from 29 to 37 with revision (P<0.001). Symptomatic patients experienced greater functional benefit (DOHS 6.5 vs. 1.4, p=0.012) compared to asymptomatic patients, though they continued to report inferior outcomes (OHS 36.5 vs 43, p=0.004). The functional outcome of asymptomatic patients was unaffected by revision surgery (pre-revision OHS 41, post-revision OHS 43, p=0.4). Linear regression analysis confirmed use of a cobalt-chrome (CoCr)-containing bearing surface (MoM or metal-on- polyethylene) at revision and increasing BMI were predictive of poor functional outcome (R. 2. 0.032, p=0.0224 and R. 2. 0.039, p=0.015 respectively). Pre- and post-revision serum metal ions and pre-revision MRI findings were not predictive of outcome. The overall complication rate was 36% (n=65) with a re-revision rate of 6.7%. The most common complication was ongoing adverse reaction to metal debris (ARMD, defined as positive post-revision MRI) in 21.1%. The incidence of ongoing ARMD was not significantly different between those with CoCr reimplanted and those without (p=0.12). Conclusions. To our knowledge, our study represents the largest single-centre consecutive series of revision THRs from MoM bearings in the literature. Symptomatic patients experience the greatest functional benefit from revision surgery but do not regain the same level of function as patients who were asymptomatic prior to revision. The re-implantation of CoCr as a primary bearing surface and increasing BMI was associated with poorer functional outcome

This study reports the mid-term results of a large-bearing hybrid metal-on-metal total hip replacement in 199 hips (185 patients) with a mean follow-up of 62 months (32 to 83). Two patients died of unrelated causes and 13 were lost to follow-up. In all, 17 hips (8.5%) have undergone revision, and a further 14 are awaiting surgery. All revisions were symptomatic. Of the revision cases, 14 hips showed evidence of adverse reactions to metal debris. The patients revised or awaiting revision had significantly higher whole blood cobalt ion levels (p = 0.001), but no significant difference in acetabular component size or position compared with the unrevised patients. Wear analysis (n = 5) showed increased wear at the trunnion-head interface, normal levels of wear at the articulating surfaces and evidence of corrosion on the surface of the stem. The cumulative survival rate, with revision for any reason, was 92.4% (95% confidence interval 87.4 to 95.4) at five years. Including those awaiting surgery, the revision rate would be 15.1% with a cumulative survival at five years of 89.6% (95% confidence interval 83.9 to 93.4). This hybrid metal-on-metal total hip replacement series has shown an unacceptably high rate of failure, with evidence of high wear at the trunnion-head interface and passive corrosion of the stem surface. This raises concerns about the use of large heads on conventional 12/14 tapers

Purpose: Metal-on-metal articulations in total hip arthroplasty (THA) have been recently re-introduced for the treatment of osteoarthritis. There have been excellent short-term clinical outcomes reported. The long-term clinical results of these implants are still unknown. In this study, we examined the four to ten -year results of metal-on-metal total hip arthroplasty at our institution. Method: All patients receiving a metal-on-metal prosthesis were prospectively registered in a computerized database. The period July 1997 – May 2003 was selected for analysis. This group contained 251 cases (207 patients) and had an average follow-up of 6.8 years. Of the 251 implants the femoral head components were either Metasul. ™. (203) or Ultamet. ™. (48) and the acetubular component Fitek. ™. (12), Interop. ™. (191) or Pinnacle. ™. (48). All patients were assessed with the Harris hip and UCLA activity scores at routinely scheduled follow-up visits. The mean age of patients at surgery was 52 years (18 to 70 years old). The average follow-up was of 6.8 years (4.2–10 years). No patients were lost to follow-up. Results: The mean UCLA and Harris hip score pre-operatively were 3.6 (1–8) and 42 (15–81), respectively. Values of the UCLA and the Harris hip scores on the most recent follow-up visit were 7.0 (60% of patients had a score equal to or greater than 7) and 85 (70% of patients had a score equal to or greater than 85), respectively. Thirteen hips (5.1%) were revised in total: 1 (0.4%) for early deep infection, 1 (0.4%) for revision of undersized stem and 11 (4.3%) for acetabular revisions due to manufacturing defects. Radiological results showed no osteolysis and 9 non-progressive radiolucency. Conclusion: At four to ten year follow-up, metal-on-metal total hip replacement provides consistently good clinical and radiographic results with a low revision rate. They provide longstanding pain alleviation and improved function and activity levels in patients suffering from osteoarthritis

Metal-on-metal total hip replacement has been targeted at younger patients with anticipated long-term survival, but the effect of the production of metal ions is a concern because of their possible toxicity to cells. We have reviewed the results of the use of the Ultima hybrid metal-on-metal total hip replacement, with a cemented polished tapered femoral component with a 28 mm diameter and a cobalt-chrome (CoCr) modular head, articulating with a 28 mm CoCr acetabular bearing surface secured in a titanium alloy uncemented shell. Between 1997 and 2004, 545 patients with 652 affected hips underwent replacement using this system. Up to 31 January 2008, 90 (13.8%) hips in 82 patients had been revised. Pain was the sole reason for revision in 44 hips (48.9%) of which 35 had normal plain radiographs. Peri-prosthetic fractures occurred in 17 hips (18.9%) with early dislocation in three (3.3%) and late dislocation in 16 (17.8%). Infection was found in nine hips (10.0%). At operation, a range of changes was noted including cavities containing cloudy fluid under pressure, necrotic soft tissues with avulsed tendons and denuded osteonecrotic upper femora. Corrosion was frequently observed on the retrieved cemented part of the femoral component. Typically, the peri-operative findings confirmed those found on pre-operative metal artefact reduction sequence MRI and histological examination showed severe necrosis. Metal artefact reduction sequence MRI proved to be useful when investigating these patients with pain in the absence of adverse plain radiological features

A-70-year old woman underwent uncomplicated total hip arthroplasty using a titanium modular stem with a 46mm CoCr femoral head, a titanium shell, and a metal linear (Wright Medical Technology). Eight years after implantation, she presented with a painful left hip. A pelvic radiograph revealed adequate positioning of both hip implants without any signs of wear of loosening. CT scanning confirmed the presence of a 5 × 5 cm soft tissue mass in the ilium above the cup component accompanied by the iliac fracture. The patient was diagnosed as having an adverse reaction to metal debris (ARMD) after a metal-on-metal THA and revision was performed. Perioperatively?tissue necrosis and partial destruction of the abductor mechanism were found in the absence of any macroscopic infection. Both the neck trunnion and bore of the head showed slight signs of corrosion. The modular neck was revised with a ceramic 28mm head and a new dual-mobility liner(Zimmer Biomet). The iliac fracture was fixed with a porous trabecular metal augment(Zimmer Biomet). The histopathology of tissue sample revealed extensively necrotic material with focal cellular areas of inflammatory cells containing macrophages and neutrophilas. Metalic debris was also scattered in the necrotic materials. After the revision, the patient was recovered without pain or dislocation, and iliac fracture was well fixed. Instability is a substantial problem in the revision of ARMD. Extensive necrosis with gross deficiency of the abductor mechanism is associated with postoperative dislocation. Revision of failed MoM THA a dual-mobility device an effective strategy

Second-generation metal-on-metal bearings have been used since the late 1980s as alternative bearings to eliminate aseptic loosening due to polyethylene wear. The aim of the present study was to evaluate the long-term results of a series of Metasul (Zimmer GmbH, Winterthur, Switzerland) metal-on-metal total hip arthroplasty (THA). Between January 1993 and September 1996, 149 cementless THAs with a 28 mm Metasul articulation were performed in 111 consecutive patients. Implant survivorship was calculated and clinical and radiographic evaluations were performed on 82 hips still available for follow-up at a mean of 18 years postoperatively. Nine hips (6.0%) were revised. The cumulative probability of survival of the overall implant at 18 years postoperatively with revision for any reason as the end point, was 0.937 (95% confidence interval, 0.888 to 0.985). The cumulative probability of survival of Metasul with revision for any reason as the end point, was 0.956 (95% confidence interval, 0.916 to 0.997). Various degrees of radiolucencies and osteolysis were found proximally around the femoral components of 25 hips (20%). Cementless Metasul THA showed high survival at 18 years postoperatively

We have performed 466 metal-on-metal total hip replacements (THR) in our hospital, since November 1993. Forty-seven of these have been the TPP (Thrust plate prosthesis - Sulzer Medica). We present here the results of our experience with this prosthesis when used for the “younger” patient. Forty-two patients received 47 THRs The age was 40 years (range: 21 – 53 years) There were 25 female patients. At the latest review: one patient (with two THRs) had died from a pulmonary embolus one patient had a revision for an aseptic loosening (one hip) one patient was lost to follow-up (one hip). The remainder were satisfactory although two hips had subsided into a varus position. The early results were satisfactory in this high-demand group of patients

Aim. The aim of this study is to estimate the medium-term results with the Zweymueller metal-on-metal THA in the osteoarthritis of the hip. Material & Methods. A total of 266 consecutive patients, received 350 third-generation Zweymueller-SL total hip arthroplasties with metal-on-metal articulation for primary or secondary osteoarthritis. The age of the patients at the time of surgery was 55+9 years, (range 25–70 years). Seven (3%) patients did not return for their last follow-up evaluation and they excluded. Results. The mean follow-up was 67 months (range 49–102 months). The preoperative Harris hip score was 45±19 and increased to 87±4 postoperatively. The invalidity of the patients was significantly improved postoperatively (p< 0.001). In all, 97% of the patients were satisfied or very satisfied with the result of the operation. There was no aseptic loosening noted in this series. Revision was done in 6 (1.8%) hips because of septic loosening (n=5, 1.5%) or technical error (n=1, 0.3%) during implantation. Dislocation of the prosthesis occurred in the early postoperative period in 2 (0.6%) hips because of technical errors during implantation. Periarticular ossification was observed in 30% of the hips (5% Brooker grades III and IV), but without associated disability. During revision surgery, no macroscopic metalosis could be identified in the newly formed hip joint membrane; how ever microscopic evidence for metalosis (Mirra grades 1 and 2) was seen in all revised hips. The survival for Zweymueller screw socket and stem 7.6 years after implantation was 99.4% and 96.8%, respectively. Conclusion. The reasons of the loosening of Metal-on-Metal Zweymueller THA were the infection or the technical errors during implantation of the socket and nothing about the metal-on-metal articulation

We investigated the incidence of soft-tissue lesions after small head metal-on-metal total hip replacement (MoM THR). Between December 1993 and May 1999, 149 patients (195 hips) underwent primary cementless MoM THR. During the follow-up period, three patients (five THRs) died and eight patients (14 THRs) were lost to follow-up. We requested that all patients undergo CT evaluation. After exclusion of five patients (six THRs) who had undergone a revision procedure, and 22 (28 THRs) who were unwilling to take part in this study, 111 patients (142 THRs) were evaluated. There were 63 men (88 THRs) and 48 women (54 THRs) with a mean age of 45.7 years (37 to 56) at the time of surgery. The mean follow-up was 15.4 years (13 to 19). A soft-tissue lesion was defined as an abnormal peri-prosthetic collection of fluid, solid lesion or asymmetrical soft-tissue mass. At final follow-up, soft-tissue lesions were found in relation to 28 THRs (19.7%), including 25 solid and three cystic lesions. They were found in 20 men and eight women; 26 lesions were asymptomatic and two were symptomatic. The mean maximal diameter of the soft-tissue lesion was 42.3 mm (17 to 135). The relatively high rate of soft-tissue lesions observed with small head MoM THR remains a concern. Cite this article: Bone Joint J 2014;96-B:1594–9

Objectives. Hips with metal-on-metal total hip arthroplasty (MoM THA) have a high rate of adverse local tissue reactions (ALTR), often associated with hypersensitivity reactions. Dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) measures tissue perfusion with the parameter Ktrans (volume transfer constant of contrast agent). Our purpose was 1) to evaluate the feasibility of DCE-MRI in patients with THA and 2) to compare DCE-MRI in patients with MoM bearings with metal-on-polyethylene (MoP) bearings, hypothesising that the perfusion index Ktrans in hips with MoM THA is higher than in hips with MoP THA. Methods. In this pilot study, 16 patients with primary THA were recruited (eight MoM, eight MoP). DCE-MRI of the hip was performed at 1.5 Tesla (T). For each patient, Ktrans was computed voxel-by-voxel in all tissue lateral to the bladder. The mean Ktrans for all voxels was then calculated. These values were compared with respect to implant type and gender, and further correlated with clinical parameters. Results. There was no significant difference between the two bearing types with both genders combined. However, dividing patients by THA bearing and gender, women with MoM bearings had the highest Ktrans values, exceeding those of women with MoP bearings (0.067 min. −1. versus 0.053 min. −1. ; p-value < 0.05) and men with MoM bearings (0.067 min. −1. versus 0.034 min. −1. ; p-value < 0.001). Considering only the men, patients with MoM bearings had lower Ktrans than those with MoP bearings (0.034 min. −1. versus 0.046 min. −1. ; p < 0.05). Conclusion. DCE-MRI is feasible to perform in tissues surrounding THA. Females with MoM THA show high Ktrans values in DCE-MRI, suggesting altered tissue perfusion kinematics which may reflect relatively greater inflammation. Cite this article: Dr P. E. Beaule. Perfusion MRI in hips with metal-on-metal and metal-on-polyethylene total hip arthroplasty: A pilot stud. Bone Joint Res 2016;5:73–79. DOI: 10.1302/2046-3758.53.2000572

In a randomised study, 28 patients with a mean age of 62.2 years (32 to 81) with osteoarthritis or avascular necrosis of the hip received either a ceramic-on-ceramic or a metal-on-metal total hip replacement. Apart from the liners the acetabular and femoral components were made of Ti-Al-Nb alloy. The serum aluminium and cobalt levels were measured before, and at one year after surgery. The 15 patients in the ceramic-on-ceramic group had a median pre-operative aluminium level of 1.3 μg/l (0.25 to 8.4) and a cobalt level below the detection limit. At one year the aluminium level was 1.1 μg/l (0.25 to 2.3) and the cobalt level was 0.4 μg/l (0.15 to 0.7). The 13 patients in the metal-on-metal group had a median pre-operative aluminium level of 1.9 μg/l (0.25 to 4.4) and a cobalt level below the detection limit. At one year the median aluminium level was 0.9 μg/l (0.25 to 3.9) whereas the cobalt level was 1.4 μg/l (0.5 to 10.5). This increase in the cobalt level at one year was significant (p < 0.001). Our findings indicate that ceramic-on-ceramic bearings do not cause elevated levels of serum aluminium in the first post-operative year

Purpose: A significant increase in serum cobalt level has been reported after metal-on-metal total hip arthroplasty with wide individual variability related to activity level, mechanical conditions of the implant, and urinary elimination of cobalt. We studied serum cobalt levels over time to further analyse these factors. Material and methods: The Metazul® prosthesis was implanted in 119 patients (72 men and 47 women, 12 bilateral implantations) (131 implants). We selected 50 patients (27 men and 23 women, mean age 53 years) who had two blood samples after the procedure allowing an assessment of the serum cobalt kinetics. Other chromium-cobalt implants, vitamin B12 intake, renal failure, or haematological disorders were recorded. An activity questionnaire was filled out by the patients at the time of the blood sample. Samples were drawn with a special kit to avoid metal contamination. The detection limit was 1 nmol/L (0.06 μg/L) with direct electrothermic atomic spectrometric absorption. Results: In the overall series, serum cobalt level was 44 nmol/L for a physiological level in a control population of 4.28 nmol/L. The difference was significant (p < 0.0001) between the levels observed before surgery and after 18 months implantation. There was no significant correlation with the indication for arthroplasty, presence of dislocation or subdislocation, functional outcome or radiographic findings. Activity level the week before sampling did not influence the results. For the 50 cases evaluated longitudinally, four groups of patients could be identified. The first group (29 patients) had a serum cobalt level below 50 nmol/L over the entire study period. The second group (nine patients) had a level greater than 50 nmol/L followed by a decline ending with a final level below 50 nmol/L. In the third group (six patients) serum cobalt was greater than 50 nmol/L with no trend to a decline. In the fourth group (six patients) the cobalt levels were very high (greater than 150 nmol/L). Discussion: The six patients in the fourth group were very particular. There were three patients with secondary bilateral implants with a late peak in serum cobalt, one with an impingement on the acetabular rim, one with renal failure, and one who had a very high level of physical activity. The first group had what appears to be a favourable course, similar to the second group where a stabilisation phenomenon could be operating. An explanation in the third group is difficult but could involve a third segment abrasion phenomenon. Conclusion: Longitudinal analysis of serum cobalt levels provides more information than point measures in patients with metal-on-metal arthroplasties. Intercurrent mechanical phenomena can be detected; unexpected behaviour of the metal-on-metal junction can be suspected in certain patients

Purpose. To determine whether there is a difference in the metal ion levels among three different metal-on-metal total hip systems: two monoblock large heads and one modular metal-on-metal total hip replacement system in patients who received these implants in our region. Method. A group of 56 patients were recruited that had either undergone total hip replacement (THR) with a Birmingham resurfacing socket, the Durom resurfacing socket, or a Pinnacle metal-on-metal bearing surface. All patients recruited were at least one year following their surgery in order that their ion levels had reached a steady state. We reviewed every patient clinically, radiographically as well as biochemically. Blood was obtained for cobalt (Co) and chromium (Cr) levels. Current radiographs were arranged to assess the stability and mechanics of the total hip systems. All patients signed an informed consent and completed three questionnaires, The Western Ontario and McMaster Universities (WOMAC) index, the Short Form 36 (SF36) and UCLA activity score. A Harris Hip score was completed in order to assess individual hip function. Statistical analysis was performed on the collected data to assess whether there were any other potential influence on the mean levels of Co and Cr. Results. The blood metal ion levels in the larger non modular acetabular sockets were significantly raised compared to the Pinnacle group. For Co, 1.95 parts per billion (ppb) and 2.70 ppb in the Durom and Birmingham groups respectively compared to only 0.52 ppb in the Pinnacle group (P< 0.001). Cr levels were the same in the two monoblock systems, 1.9 ppb compared to the Pinnacle sockets 1.2 ppb (P<0.001). In all groups however these levels were within an acceptable safe range. The mean head size used in the Birmingham group was 53.2mm (Range 44mm to 56mm), and in the Durom group, 47.1 (Range 42 to 54mm). The mean head size used in the modular group was 37.3mm (Range 36–44mm). There was no difference between the three groups in terms of functional outcome and patient demographics were similar in all three groups. There was no statistical difference between the groups in terms of anteversion and abduction angles. There was also a smaller spread in this group in terms of range of angles. There was also no relationship between these values and the metal ion levels. Conclusion. All three total hip systems demonstrated average metal ion whole blood levels in a safe range. Larger diameter metal on metal bearings had higher ion levels

Aims

Large-diameter metal-on-metal (MoM) total hip arthroplasty (THA) has demonstrated unexpected high failure rates and pseudotumour formation. The purpose of this prospective cohort study is to report ten-year results in order to establish revision rate, prevalence of pseudotumour formation, and relation with whole blood cobalt levels.

We present two patients with swelling of the groin following metal-on-metal total hip replacement without radiological signs of component loosening. MRI in both patients showed a round shaped intrapelvic lesion ventral to the femoral head. During surgery we found cystic structures filled with fluid and necrotic masses. After resection the metal head and insert were changed to a ceramic head and a polyethylene insert. Although two different kinds of CoCrMo alloy were used in the metal-on-metal THR (Sikomet: low carbon content-Metasul: high carbon content) histopathological analysis in both cases showed typical morphological signs of hypersensetively determined inflammation. Despite the distinct soft tissue reaction bony component integration was unaffected. In our opinion open resecion of the cystic lesion and changing of the metal-on-metal articulation is the treatment of choice. As we do not have any reliable testing for clinical use to predict a hypersensitive reaction to metal wear after implantation of metal-on-metal THR this articulation surface should not be used in cases where allergy to metal is suspected

Background: Patients with femoral head osteonecrosis usually tend to be younger and more active when compared with osteoarthritis patients. Second generation metal-on-metal THA was reintroduced to reduce poly-ethylene-induced wear debris, and therefore increase longevity of implants. The aim of this retrospective study was to compare full blood cobalt-chrome levels, patient activity, clinical/radiological outcome and implant survival in patients with osteonecrosis and osteoarthritis after a minimum follow up of 12 years. Methods: Full blood cobalt-chrome levels of a consecutive series of 125 patients, consisting of 40 patients (38 male, 2 female, average age 35 years, range 28 to 46 years) with osteonecrosis (ON group) and 85 patients (60 male, 25 female, average age 58 years, range 52 to 68 years) with osteoarthritis (OA group) as primary diagnosis were retrospectively compared. Patient activity level was assessed using UCLA Score and clinical outcome was evaluated using HHS. Radiological outcome and implant survival (Kaplan Meyer analysis) was determined in both groups. Results: Patients with osteonecrosis of the femoral head showed significant higher UCLA scores when compared to OA group (4 versus 7) (p < 0.05). Despite this higher patient activity no significant difference was found between cobalt-chrome full blood levels (2.1/1.6 μg/l, ON group, 1.9/1.8 μg/l OA group, respectively) (p > 0.05). No positive correlation between patient activity, acetabular cup abduction angle and cobalt-chrome levels was found (r. 2. < 0.01). Clinical and radiological outcome were equal in both groups. Harris hip score was 91 points in the OA and 92 in the ON group (p > 0.05). Average cup inclination angle was 47° (range 32° to 55°) and 44° (range 30° to 56°) respectively (p > 0.05). Implant survival at 12 years follow up was 96% in the OA and 97% in the ON group. Conclusion: After a minimum follow up of 12 years, we could not find increased metal levels in osteonecrosis patients when compared to the osteoartrithis group. Regarding our clinical and radiological outcome we cannot confirm previously published reports showing suboptimal results of THA in patients with osteonecrosis. Implant survival data did not differ among both group. Metal on metal THA seems to be an effective and safe treatment option for these patients

Introduction

In recent years, an increasing number of reports related to adverse reactions to metal debris (ARMD) following metal-on-metal (MOM) total hip arthroplasty (THA) have been published. Some patients who experience ARMD require revision surgery.