Background. Loss of muscle mass (sarcopenia) and function in ageing are associated with reduced functional ability, quality of life and reduced
Several different algorithms attempt to estimate
One out of nine Canadian males would suffer prostate cancer (PC) during his lifetime.
Nationally, experimental estimated Indigenous
Intro. Across much of medicine, activity levels predict
Since the market withdrawal of the ASR hip resurfacing in August 2010 because of a higher than expected revision rate as reported in the Australian Joint Replacement Registry (AOAJRR), metal-on-metal hip resurfacing arthroplasty (MoMHRA) has become a controversial procedure for hip replacement. Failures related to destructive adverse local tissue reactions (ALTR) to metal wear debris have further discredited MoMHRA. Longer term series from experienced resurfacing specialists, however, demonstrate good outcomes with excellent 10- to 15-year survivorship in young and active men. Besides, all hip replacement registries report significantly worse survivorship of total hip arthroplasty (THA) in patients under 50 compared to older ages. The triad of a well-designed device, implanted accurately, in the correct patient has never been more critical than with MoMHRA implants. The surgical objectives of MoMHRA were to preserve bone stock, maintain normal anatomy and mechanics of the hip joint and to approximate the normal stress transmission to the supporting femoral bone. The functional objectives were better sports participation, less thigh pain and limp, less perception of a leg length difference and a greater perception of a normal hip. Cobb reported that patients with MoMHRA were able to walk faster and with more normal stride length than patients with well performing hip replacements. They also show that function following hip replacement is very good, with high satisfaction rates, but the use of a patient centered outcome measure (PCOM), and objective measures of function reveal substantial inferiority of THA over MoMHRA in two well-matched groups. When coupled with the very strong data regarding
Background. As
The burden of metastatic bone disease (MBD) in our Canadian cancer population continues to increase. MBD has a significant effect on patient morbidity, mortality, and health-related quality of life (HRQOL). There are various technical options used to surgically stabilize MBD lesions, surgical decision-making is variable and largely dependent on anatomic and surgeon-based factors. There is a paucity of research examining how surgical decision-making for MBD can be modified or individualized to improve quality of life (QOL) and functional outcomes, while more accurately aligning with patient-reported goals and expectations. The objective of this study was tosurvey MBD patients, support persons, physicians, and allied health care providers (HCP) with the goal of identifying 1) important contributors to HRQOL, 2) discordance in peri-operative expectations, and 3) perceived measures of success in the surgical management of MBD. This project is a longitudinal patient-engaged research initiative in MBD. A survey was developed based on HRQOL themes in the literature and based on feedback from our patient research partners. Participants were asked to identify 1) important contributors to HRQOL and 2) perceived measures of success relevant to the surgical management of MBD. Participants were asked to rank themes from ‘extremely important’ to ‘not important at all’. Using open-ended questions, participants were asked to identify areas of improvement. Responses from the open-ended questions were analyzed by an experienced qualitative researcher using conventional content analysis. Participant's demographics were calculated using descriptive statistics. Concordance or discordance of perceived measure of success was assessed via a Chi-Square test of independence. All statistical analyses were performed using IBM SPSS® software. Nine patients, seven support persons, 23 orthopaedic surgeons, 11 medical oncologists, 16 radiation oncologists, 16 nurses, and eight physiotherapists completed the survey. Regarding perceived measures of success, increased
Background. Over 10% of total hip arthroplasty (THA) surgeries performed in England and Wales are revision procedures. 1. Malorientation of the acetabular component in THA may contribute to premature failure. Yet with increasingly younger populations receiving THA surgery (through higher incidences of obesity) and longer
Introduction. The global rapid growth of the aging population has some likelihood to create a serious crisis on health-care and economy at an unprecedented pace. To extend Healthy
Total knee replacements are being more commonly performed in active younger and obese patients. Fifteen-year survivorship studies demonstrate that cemented total knee replacements have excellent survivorship, with reports of 85 to 97%. Cemented knee arthroplasties are doomed to failure due to loss of cement-bone interlock over time. Inferior survivorship occurs in younger patients and obese patients who would be expected to place increased stress on the bone-cement interfaces. Roentgen stereophotogrammetric analysis (RSA) studies have indicated that cementless fixation should perform better than cemented fixation. However, cementless fixation for total knee replacement has not gained widespread utilization due to the plethora of poor results reported in early series. The poor initial results with cementless total knee replacement have occurred due to poor implant designs such as cobalt chrome porous interfaces, poor initial tibial component stability, lack of continuous porous coating, poor polyethylene, and use of metal-backed patellae. I have used cementless fixation for total knee replacements for young, active, and heavy patients since 1986 when durability over 20 years is desirable. My series of over 1,300 cementless TKAs represents about 20% of the 6,500 total knees I have performed from 1986 to 2017. I have seen initial failures in my series due to the use of metal-backed patellae with thin polyethylene, older generation polyethylene, and use of screws with the tibial components which provide access to the metaphyseal bone for polyethylene wear debris. Overall implant fixation failures were still significantly low due to the use of a highly porous titanium surface on both the tibial and femoral components. With the advent of utilizing implants with continuous porous surfaces and highly crosslinked polyethylene, and elimination of use of metal-backed patellae and tibial screws, I have only had one revision due to aseptic loosening or osteolysis in the last 1,071 cases performed since 2002. Almost 50% of total knees are now performed on patients under the age of 65. A 55-year-old patient has a 30 year
Background. Acromegaly, which stems from high level of serum growth hormone secreted by a benign tumour in the anterior pituitary gland, is likely to cause severe peripheral joint pains due to hypertrophic changes in such joints. Recently, the
Hip resurfacing presents advantages and disadvantages compared to total hip arthroplasty. Dislocation and leg length discrepancy, common complaints with total hips, are unusual following resurfacing. Bone stock in the proximal femur is retained, and revision options on the femoral side of a resurfacing are much better. Concerns persist regarding adverse tissue reactions to metal debris. Conflicting data abounds regarding ultimate hip function, patient satisfaction, durability, etc. Yet all of these would be rendered irrelevant if resurfacing carried with it greater
Pathologic fractures about the hip are an uncommon, but increasingly prevalent, clinical scenario encountered by orthopaedic surgeons. These fractures about the hip usually necessitate operative management.
Significant hip osteoarthritis has been reported in 8–28% of patients with Down Syndrome. The prolonged
Purpose. The results of ceramic-on-ceramic (CoC) bearing surfaces in primary total hip arthroplasty (THA) were well known. However, it was not known in revision THA. The purpose of this study is to report the results of revision THA with ceramic articulation. Materials and Methods. 112 revision THAs with ceramic articulation were evaluated. The mean age at the time of surgery was 58.3 years (28 to 97). The mean duration of the follow-up periods was 6.4 years (2 to 11.8 years). Results. The Harris hip scores improved from an average of 79.0 at the index surgery to an average of 91.1 at the last follow-up. (P<0.001) None of hips showed osteolysis or ceramic head fracture. One hip shows aseptic loosening in the acetabular components with squeaking that caused a re-revision. There were nine cases of dislocation. The overall survival rate of the implants was 85.1% (95% confidence interval, 61.7% to 94.0%) at ten years with revision for any reason as the end point. Conclusion. The ceramic articulation is one of good bearing options for revision THA in patients with a long
There is an increased incidence of dislocation, dysplasia, slipped epiphysis, Perthes’ disease, and avascular necrosis leading to degenerative arthritis which occurs in up to 28% of Down's syndrome patients. As the
While total hip arthroplasty (THA) has been shown successful at relieving pain and improving function in patients with coxarthrosis, wear and instability remain leading causes for revision surgery. Highly crosslinked polyethylene (HXPE) has significantly reduced wear and osteolysis but volumetric wear associated with the use of larger diameter ball heads may be an issue in the long-term. Finally, concerns with femoral taper corrosion have increased the utilization of ceramic ball heads in recent years. Ceramic on ceramic articulations are optimised for both minimizing implant wear and instability. It is biocompatible, wettable, and possesses the lowest in vitro and in vivo wear rates among all bearing couples. In fact, wear rates are lowest when the ceramic ball head size is maximised. Additionally, modern ceramic on ceramic THA designs have had an excellent clinical track record with low rates of loosening, failure, and no reports of osteolysis in even highly active, young patients. Concerns with ceramics center around issues related to fracture risk, squeaking, and cost. While the phenomenon of squeaking remains poorly understood, the reliability of ceramic implants have steadily improved with better materials, design, and manufacturing. The fracture risk for modern pure alumina implants and the newer alumina matrix composite ceramics are 1 in 5000 and 1 in 100,000, respectively. The advantages of ceramic on ceramic THAs will not be realised on every patient and therefore, should be selectively used. However, with expected increases in
In properly chosen patients, cementless total knee arthroplasty has achieved success rates equal to cemented designs. The initial variable results of early cementless total knee replacements were a function of design, surgical technique and patient selection. Important design considerations that have enhanced biologic ingrowth include the use of commercially pure titanium with optimal pore size and porosity, and avoidance of porous-coated stems and plugs that cause stress shielding of the bone-implant interface. Factors in surgical technique that enhance bone ingrowth include precise bone cuts that maximise bone-implant contact, and the application of autogenous bone slurry to cut surfaces. Additional factors are restoration of normal alignment, appropriate ligament balance, and the reproduction of the patient's native tibial slope in order to prevent tibial component subsidence. Young and active patients are ideal biological hosts for the use of cementless knee fixation. Their relatively dense cancellous bone and rich blood supply provides for robust purchase for initial fixation and the appropriate milieu for long-term biologic fixation. With increasing
Significant hip osteoarthritis has been reported in 8–28% of patients with Down Syndrome. The prolonged