Introduction and Objective. Pectus carinatum is a common congenital anterior chest wall deformity, characterized by outward protrusion of sternum and ribcage resulted from rib cartilage overgrowth. The protrusion may be symmetrical or asymmetrical. Pectus carinatum association with mitral valve diseases, Marfan's syndrome, and scoliosis enforces that poor connective tissue development as possible etiological factor. Despite the coexistence of pectus carinatum and scoliosis has attracted the attention of some researchers, the association between pectus carinatum and the other spinal deformities has not been studied comprehensively. The frequency of spinal deformity in patients with pectus carinatum and the mutual relationships of their subtypes are needed to be studied to determine the epidemiological character of the combined deformity and to plan patient evaluation and management. Our study aimed to investigate the association, define the incidence and evaluate the characteristics between different types of spinal deformities and Pectus carinatum. Materials and Methods. Radiological and physical examinations were performed for 117 pectus carinatum patients in Marmara university hospital/Turkey in the years between 2006 and 2013. The incidence of spinal deformity was calculated. Spinal deformities were classified as scoliosis, kyphosis, kyphoscoliosis, and spinal asymmetry, whereas pectus carinatum were subdivided into symmetric and asymmetric subgroups. The relationship between spinal deformities and the symmetrical-asymmetric subtype of pectus excavatum was statistically analyzed, Pearson chi-square test was used to compare the association of qualitative data. The significance level was accepted as p <0.05. Lastly, the angular values of the deformities of scoliosis and kyphosis patients were measured using the Cobb method. In this way, the magnitude of the deformity was given as a numerical value. Results. Spinal deformity was detected in 23 (17 symmetrical PE and 6 asymmetrical PE) of 117 pectus excavatum patients. Scoliosis and kyphosis were seen equally in symmetrical pectus carinatum, whereas scoliosis was seen in 33.3% and kyphosis in 50% in asymmetric pectus carinatum patients, respectively. However, there were no statistically significant differences in the distribution of scoliosis and kyphosis in patients with symmetrical and asymmetrical PE. Idiopathic scoliosis constituted the most common scoliosis group. Congenital kyphosis was not found in any kyphosis patient. The average Cobb angle of scoliosis patients was 32°, and the mean T2-T12 kyphosis angle of these patients was 55.5°, while the average kyphosis angle of those with kyphosis deformity was 71°. Conclusions. Patients with Pectus carinatum have a higher incidence of spinal deformities than the normal population. Such high concomitant incidence should be taken under consideration in evaluating and treating patients presenting with either deformity

Aging impairs the regenerative capacity of musculoskeletal tissues and is associated with poor healing outcomes. PolgA. D257A/D257A. (PolgA) mice present a premature aging phenotype due to the accumulation of mitochondrial DNA (mtDNA) point mutations at rates 3 – 5 fold higher compared to wild type mice. Consequently, PolgA mice exhibit the premature onset of clinically-relevant musculoskeletal aging characteristics including frailty, osteo-sarcopenia, and kyphosis. I will present our recent findings on the use of PolgA mice to investigate the effects of aging on the regenerative capacity of bone. In particular, I will focus on the mechano-sensitivity of the regenerative process in aged bone environments and the opportunities it presents for clinical translation of mechanical intervention therapies

The aim of this study was to report the restauration of the normal vertebral morphology and the absence of curve progression after removal the instrumentation in AIS patients that underwent posterior correction of the deformity by common all screws construct whitout fusion. A series of 36 AIS immature patients (Risser 3 or less) were include in the study. Instrumentation was removed once the maturity stage was complete (Risser 5). Curve correction was assessed at pre and postoperative, before instrumentation removal, just post removal, and more than two years after instrumentation removal. Epiphyseal vertebral growth modulation was assessed by a coronal wedging ratio (WR) at the apical level of the main curve (MC). The mean preoperative coronal Cobb was corrected from 53.7°±7.5 to 5.5º±7.5º (89.7%) at the immediate postop. After implants removal (31.0±5.8 months) the MC was 13.1º. T5–T12 kyphosis showed a significant improvement from 19.0º before curve correction to 27.1º after implants removal (p<0.05). Before surgery, WR was 0.71±0.06, and after removal WR was 0.98±0.08 (p<0.001). At the end of follow-up, the mean sagittal range of motion (ROM) of the T12-S1 segment was 51.2±21.0º. SRS-22 scores improved from 3.31±0.25 preoperatively to 3.68±0.25 at final assessment (p<0.001). In conclusion, fusionless posterior approach using a common all pedicle screws construct correct satisfactory scoliotic main curves and permits removal of the instrumentation once the bone maturity is reached. The final correction was highly satisfactory and an acceptable ROM of the previously lower instrumented segments was observed

In healthy subjects, respiratory maximal volumes are highly dependent on the sagittal range of motion of the T7-T10 segment. In AIS, the abolition of T7-T10 dynamics related to the stiffness induced by the apex region in Lenke IA curves could harm ventilation during maximal breathing. The aim of this study was to analyze the dynamics of the thoracic spine during deep breathing in AIS patients and in healthy matched controls. This is a cross-sectional, case-control study. 20 AIS patients (18 girls, Cobb angle, 54.7±7.9°; Risser 1.35±1.2) and 15 healthy volunteers (11 girls) matched in age (12.5 versus 15.8 yr. mean age) were included. In AIS curves, the apex was located at T8 (14) and T9 (6). Conventional sagittal radiographs of the whole spine were performed at maximal inspiration and exhalation. The ROM of each spinal thoracic functional segment (T1-T7, T7-T10, T10-T12) and the global T1-T12 ROM were measured. In healthy subjects, the mean T1-T12 ROM during forced breathing was 16.7±3.8. AIS patients showed a T1-T12 ROM of 1.1±1.5 (p<0.05), indicating a sagittal stiffness of the thoracic spine. A wide T7-T10 ROM (15.3±3.0) was found in healthy controls (91.6% of the T1–T12 ROM). AIS patients showed only 0.4±1.4 ROM at T7-T10 (36.4% of the T1-T12 ROM) (p<0.001). There was a significant positive correlation between the magnitude of T7-T10 kyphosis in maximal exhalation and both FVC (% of predicted FVC) and FEV1. In conclusion, Lenke 1A AIS patients show a restriction of the thoracic spine motion with an almost complete abolition of T7-T10 ROM, a crucial segment for deep breathing. T7-T10 stiffness could explain the ventilatory limitations found in AIS patients

Summary Statement. Paraspinal muscle contain higher proportion of slow-twich fibers. The fixation of the rat tail induced transition of muscle fiber types in the paravertebral muscles characterised by the decrease in the proportion of the slow type myosin heavy chain. Introduction. Lumbar degenerative kyphosis often accompanies back pain, easy fatigability, fatty degeneration and atrophy of back muscles. There are two types of skeletal muscle fibers according to oxidative activities: slow-twich (Type 1) and fast-twitch (Type 2) fibers. Type 2 fibers were subdivided into three types: Type 2A, 2B and 2D/X. Each fiber type primarily expresses a specific isoform of myosin heavy chain (MHC). It has been known that back muscles contain higher proportion of MHC type 1. However, the impact of kyphosis on the proportion of fiber types in the paravertebral muscles has not been fully understood. The aim of this study is to analyze the transition of muscle fiber types after kyophotic or straight fixation using a rat tail model. Methods. A rat tail was fixed in straight or kyphotic position (straight or kyphosis group) by a custom-made external fixator and wires. A group of animals which underwent only pierced wounds in their tails served as control. The gene expression profiles of isoforms of MHCs in dorsal coccygeal muscles were analyzed by quantitative RT-PCR. The fiber types of muscles were assessed using SDS-PAGE. Band densities of silver-stained gel were quantified. Results. At first, the gene expression profiles of MHCs and protein expression in the dorsal coccygeal muscles were compared with tibilis anterior and gastrocunemius muscles. Higher proportion of MHC type 1 gene and protein expression were confirmed in the dorsal coccygeal muscles than tibialis anterior and gastrocuneimus muscles. MHC type 2B protein expression was not detected in dorsal coccygeal muscles. Next, coccygeal muscles after straight or kyphotic fixation were analyzed and compared with control. Gene expression of MHC type 1 was decreased at 7 and 28 days after fixation in straight and kyphosis group. The significant difference was seen at 28 days in kyphosis group. The band densities of MHC protein type 1 and 2A plus 2D/X were decreased in both straight and kyophosis groups at 28 days after fixation while sample volume was adjusted by wet wight of dissected coccygeal muscles. The mean proportion of MHC protein type 1 separated by SDS-PAGE were decreased in straight and kyphosis group. The difference was significant in straight group. Discussion. Our results demonstrated that the fixation of the rat tail induced transition of muscle fiber types in the paravertebral muscles characterized by the decrease in the proportion of the MHC type 1. Back muscles are required to contract continuously to keep posture. Slow-twitch fibers in back muscle contribute for continuous contraction. Slow-twitch fibers utilise energy efficiently by oxidative process while fast-twitch fibers mainly consume glucose through glycolysis producing lactate acid. Not only decreased amount of MHC but also decreased proportion of MHC type 1 might be the reason of easy fatigability in lumbar degenerative kyphosis. The limitations of this study is the difference between human paravertebral and rat coccygeal muscles and short duration of observation

Currently, between 17% of patients undergoing surgery for adult spinal deformity experience severe instrumentation related problems such as screw pullout or proximal junctional failure necessitating revision surgery. Cables may be used to reinforce pedicle screw fixation as an additive measure or may provide less rigid fixation at the construct end levels in order to prevent junctional level problems. The purpose of this study is to provide insight into the maximum expected load during flexion in UHMWPE cable in constructs intended for correction of adult spine deformity (degenerative scoliosis) in the PoSTuRe first-in-man clinical trial. Following the concept of toppinoff, a new construct is proposed with screw/cable fixation of rods at the lower levels and standalone UHMWPE cables at the upper level (T11). A parametric FE model of the instrumented thoracolumbar spine, which has been previously validated, was used to represent the construct. Pedicle screws are modeled by assigning a rigid tie constraint between the rod and the lamina of the corresponding spinal level. Cables are modeled using linear elastic line elements, fixing the rod to the lamina medially at the cranial laminar end and laterally at the caudal laminar end. A Youngs modulus was assigned such that the stiffness of the line element was the same as that of the cable. An 8 Nm flexion moment was applied to the cranial endplate. The maximum value of the force in the wire (80 N) is found at the T11 (upper) level. At the other levels, forces in the cable are very small because most of the force is carried by the screw (T12) or because the wires are force shielded by the contralateral and adjacent level pedicle screws (L2, L3). The model provides first estimates of the forces that can be expected in the UHMWPE cables in constructs for kyphosis correction during movement. It is expected that this approach can help in defining the number of wires for optimal treatment

Balloon kyphoplasty (BKP) is a minimally invasive surgical technique used to correct kyphosis and vertebral compression fractures. BKP uses cement to fill a void created by the inflation of a balloon in a vertebra, it can be used as an alternative to vertebroplasty to reduce cement extravasation. Issues such as poor inter digitisation of the cement and the trabecular bone can arise with the BKP method. This can be due to a compacted layer created during the procedure which can cause complications post-surgery. The primary aim of this study was to investigate alternative cement application methods which could improve the mechanical strength of the bone-cement interface. Three alternative methods were investigated, and cylindrical bone-cement specimens were created for all methods (BKP and three alternatives). An important part of this study was to replicate the compacted layer created by the inflation of the balloon tamp in BKP. Synthetic trabecular bone specimens (Sawbones®, Pacific Research Laboratories, Vashon Island, Washington, USA) were pre-loaded in compression and the resultant compacted layers were found to replicate the compacted layers found in surgery. Mechanical testing was carried out with an MTS Model 858 Bionix. ®. Servohydraulic load frame using static tensile and torsion loads. Static tests revealed that two of the three alternative methods were an improvement on BKP, with a high statistical significance in relation to the mechanical performance of the bone-cement interface (P < 0.001). This data illustrates the potential to improve the standard BKP technique, in terms of bone-cement interface performance

Summary. Pyogenic spondylodiscitis is an uncommon but severe spinal infection. In majority of cases treatment is based on intravenous antibiotics and rigid brace immobilization. Posterior percutaneous spinal instrumentation is a safe alternative procedure in relieving pain, preventing deformity and neurological compromise. Introduction. Pyogenic spondylodiscitis (PS) is an uncommon but severe spinal infection. Patients affected by a non-complicated PS and treatment is based on intravenous antibiotics and rigid brace immobilization with a thoracolumbosacral orthosis (TLSO) suffices in most cases in relieving pain, preventing deformity and neurological compromise. Since January 2010 we started offering patients percutaneous posterior screw-rod instrumentation as alternative approach to TLSO immobilization. The aim of this study was to evaluate safety and effectiveness of posterior percutaneous spinal instrumentation for single level lower thoracic (T9-T12) or lumbar pyogenic spondylodiscitis. Materials and Methods. Retrospective cohort analysis on 27 patients diagnosed with PS who were offered to choose between 24/7 TLSO rigid bracing for 3 to 4 months and posterior percutaneous screw-rod instrumentation bridging the infection level followed by soft bracing for 4 weeks after surgery. All patients underwent antibiotic therapy. Fifteen patients chose conservative treatment, 12 patients chose surgical treatment. Patients were seen at 1, 3, 6, 9 months after diagnosis. Erythrocyte sedimentation rate (ESR), C-reactive protein (CRP) and complete blood count were measured at each follow-up visit. Segmental kyphosis was measured at diagnosis and at 9 months. VAS, SF-12, and EQ-5D questionnaires were recorded at each follow-up visit. Baseline groups’ demographic characteristics were assessed using independent sample t-tests for continuous variables and χ2 tests for frequency variables. Results. Complete healing was achieved in all patients, no difference was observed in healing time between the two groups (77.3±7.2 days vs 80.2±4.4). Instrumentation failure and screw loosening was not observed in any patient. In both group CRP and ESR decreased accordingly with response to antibiotic therapy. Surgically treated patients had significantly lower VAS scores at 1 month (3.05±0.57 in surgery group vs 5.20±1.21 in TLSO group) and 3 months (2.31±0.54 in surgery group vs 2.85±0.55 in TLSO group) post-diagnosis. Both groups had similar trends toward fast recovery in both mental (MCS) and physical components (PCS) of SF-12 questionnaire, surgically treated patients showed steeper and statistically significative improvement at 1 month (37.83±4.57 MCS in surgery group vs 24.52±3.03 MCS in TLSO group and 35.46±4.43 PCS in surgery group vs 27.07±4.45 PCS in TLSO group, p<0.001), 3 months (52.94±3.82 MCS in surgery group vs 39.45±4.92 MCS in TLSO group and 44.93±3.73 PCS in surgery group vs 35.33±6.44 PCS in TLSO group, p<0.001), and 6 months (54.93±3.56 MCS in surgery group vs 49.99±5.82 MCS in TLSO group) post-diagnosis, no statistically significant differences were detected at the other time points (9 months post-diagnosis). EQ-5D index was significantly higher in surgery patients at 1 month (0.764±0.043 in surgery group vs 0.458±0.197 in TLSO group) and 3 months (0.890±0.116 in surgery group vs 0.688±0.142 in TLSO group); no statistically significant changes were observed in segmental kyphosis between the two groups. Conclusion. Posterior percutaneous spinal instrumentation is a safe, feasible, and effective procedure in relieving pain, preventing deformity and neurological compromise. Surgical stabilization was associated with faster recovery, lower pain scores, and improved quality of life compared with TLSO conservative treatment at 1 and 3 months after diagnosis

Background. Using flexible tethering techniques, porcine models of scoliosis have been previously described. These scoliotic curves showed vertebral wedging but very limited axial rotation. In some of these techniques, a persistent scoliotic deformity was found after tether release. The possibility to create severe progressive true scoliosis in a big animal model would be very useful for research purposes, including corrective therapies. Methods. The experimental ethics committee of the main institution provide the approval to conduct the study. Experimental study using a growing porcine model. Unilateral spinal bent rigid tether anchored to two ipsilateral pedicle screws was used to induce scoliosis on eight pigs. Five spinal segments were left between the instrumented pedicles. The spinal tether was removed after 8 weeks. Ten weeks later the animals were sacrificed. Conventional radiographs and 3D CT-scans of the specimens were taken to evaluate changes in the coronal and sagittal alignment of the thoracic spine. Fine-cut CT-scans were used to evaluate vertebral and disc wedging and axial rotation. Results. After 8 weeks of rigid tethering, the mean Cobb angle of the curves was 24.3 ± 13.8 degrees. Once the interpedicular tether was removed, the scoliotic curves progressed in all animals until sacrifice. During these 10 weeks without spinal tethering the mean Cobb angle reached 50.1 ± 27.1 degrees. The sagittal alignment of the thoracic spine showed loss of physiologic kyphosis. Axial rotation ranges from 10 to 35 degrees. There was no auto-correction of the curve in any animal. A further pathologic analysis of the vertebral segments revealed that animals with greater progression had more damage of the neurocentral cartilages and epiphyseal plates at the sites of pedicle screw insertion. Interestingly, in these animals with more severe curves, compensatory curves were found proximal and distal to the tethered segments. Conclusions. Temporary interpedicular tethering at the thoracic spine induces severe scoliotic curves in pigs, with significant wedging and rotation of the vertebral bodies. As detailed by CT morphometric analysis, release of the spinal tether systematically results in progression of the deformity with development of compensatory curves outside the tethered segment. The clinical relevance of this work is that this tether release model will be very useful to evaluate both fusion and non-fusion corrective technologies in future research. Level of Evidence. Not apply for experimental studies

Summary Statement. Bilaretal epiphysiodesis of he neurocentral cartilages causes shortening of the sagittal length of the pedicles and a subsequent spinal stenosis at the operated segments, resembling that found in patients with achrondroplasia. Introduction. The introduction of pedicle screws in the immature spine may have implications for the growth of the vertebra. The effect of blocking the growth of neurocentral cartilage (NC) is not yet fully defined. Block hypothetically leads to a bilateral symmetrical alteration of the vertebral growth. Using an experimental animal model, our goal is to analyze if a bilateral epiphysiodesis of the NC using pedicle screws is able to induce narrowing of the spinal canal in the thoracolumbar spine. Experimental animals and Methods. A total of 24 domestic pigs were operated on by bilateral blocking of the NC using pedicle screws. The animals were divided into 4 groups depending on the level of blockage: A, low thoracic levels; B, thoracolumbar transitional hinge; C, upper lumbar spine; and D, blocking of the caudal lumbar level below L5 segment. Different morphological, morphometric and standard radiological parameters were analyzed at the thoracic and lumbar vertebrae of the animals. The deviation from the physiological parameters was established by comparing all parameters obtained in the NC-blocked animals with those acquired in 14 pigs without NC blocking. These animals were considered as the control group. Results. None of the animals that underwent NC epiphysiodesis showed asymmetrical spinal growth inducing deformities in the coronal plane. There was neither rotation nor wedging of the vertebral bodies. Whatever the level involved, NC epiphysiodesis caused shortening of the sagittal length of the pedicles and a subsequent decreasing of the antero-posterior diameter of the spinal canal. These features resulted in a frank spinal stenosis at the operated levels. However, the transverse diameter of the spinal canal was conserved in the coronal plane. In the sagittal plane, blocking of the neurocentral cartilage conditioned a lumbar hyperlordosis with compensatory kyphosis of the upper level to the operated vertebra. Conclusions. Symmetrical growth arresting of neurocentral cartilages induces a narrow spinal canal by decreasing the sagittal diameter similar to that observed in patients with achondroplasia. The most affected structure was the development of the vertebral pedicles

Introduction. Senile kyphosis arises from anterior ‘wedge’ deformity of thoracolumbar vertebrae, often in the absence of trauma. It is difficult to reproduce these deformities in cadaveric spines, because a vertebral endplate usually fails first. We hypothesise that endplate fracture concentrates sufficient loading on to the anterior cortex that a wedge deformity develops subsequently under physiological repetitive loading. Methods. Thirty-four cadaveric thoracolumbar “motion segments,” aged 70–97 yrs, were overloaded in combined bending and compression. Physiologically-reasonable cyclic loading was then applied, at progressively higher loads, for up to 2 hrs. Before and after fracture, and again after cyclic loading the distribution of compressive loading on the vertebral body was assessed from recordings of compressive stress along the sagittal mid-plane of the adjacent intervertebral disc. Vertebral deformity was assessed from radiographs at the beginning and end of testing. Results. Initial overload usually fractured a vertebral endplate, at 2.31 kN (STD 0.85). There was minimal anterior wedging, but pressure in the nucleus of the adjacent disc was reduced by 65.2% on average, and relatively elevated in the annulus and neural arch. Subsequent cyclic loading then caused anterior wedge deformity of the vertebral body, with the height of the anterior and posterior cortex decreasing by 34.3% (13.2) and 12.7% (7.5) respectively, and wedge angle increasing from 5.0° (3.76) to 11.4° (3.93) (all p<0.001). Discussion and Conclusion. Our hypothesis is supported: initial minor damage facilitates progressive anterior wedge deformity by transferring compressive loading on to the anterior cortex. Detecting initial endplate damage is important to minimise subsequent vertebral deformity in patients with osteoporosis. No conflicts of interest. Sources of funding: Funding was provided by a Royal College of Surgeons of England Research Fellowship and by the Gloucestershire Arthritis Trust. This work was presented at the British Orthopaedic Research Society Meeting

Purpose. To compare the efficacy and safety of balloon kyphoplasty (BKP) to non-surgical management (NSM) over 24 months in patients with acute painful fractures by clinical outcomes and vertebral body kyphosis correction and surgical parameters. Material and Methods. Three hundred Adult patients with one to three VCF's were randomised within 3 months of the acute fracture; 149 to Balloon Kyphoplasty and 151 to Non-surgical management. Subjective QOL assessments and objective functional (Timed up and go [TUG]) and vertebral body kyphotic angulation (KA), were assessed over 24 months; we also report surgical parameters and adverse events temporally related to surgery (within 30-days). Results. Kyphoplasty was associated with greater improvements in SF-36 PCS scores when averaged across the 24-month follow-up period, compared with NSM (overall treatment effect 3.24points, 95% CI, 1.47–5.01; p=0.0004)., and TUG (overall treatment effect −3.00 seconds, 95% CI, −1.0 to −5.1; p<0.0043). At 24 months, the change from baseline in KA was statistically significantly improved in the kyphoplasty group (average 3.1°of correction for BKP versus 0.8°for NSM, p=0.003). On average IBT inflation volumes were consistent with cement volumes at 2.4 cc per side. The most common adverse events within 30-days were back pain, new vertebral fracture, nausea/vomiting and UTI. BKP is calculated to be cost-effective in the UK setting. Conclusions. Compared with NSM, BKP improves patient function and QOL when averaged over 24-months and results in better improvement of index vertebral body kyphotic angulation. Author potential conflicts of interest; JVM, LB; SB, DW and JR are consultants for Medtronic Spine LLC for the FREE study; JBT is currently employed by Medtronic, Inc

Introduction. Senile kyphosis arises from anterior ‘wedge’ deformity of thoracolumbar vertebrae, often in the absence of trauma. It is difficult to reproduce these deformities in cadaveric spines, because a vertebral endplate usually fails first. We hypothesise that endplate fracture concentrates sufficient loading on to the anterior cortex that a wedge deformity develops subsequently under physiological repetitive loading. Methods. Thirty-four cadaveric thoracolumbar “motion segments,” aged 70–97 yrs, were overloaded in combined bending and compression. Physiologically-reasonable cyclic loading was then applied, at progressively higher loads, for up to 2 hrs. Before and after fracture, and again after cyclic loading the distribution of compressive loading on the vertebral body was assessed from recordings of compressive stress along the sagittal mid-plane of the adjacent intervertebral disc. Vertebral deformity was assessed from radiographs at the beginning and end of testing. Results. Initial overload usually fractured a vertebral endplate, at 2.31 kN (STD 0.85). There was minimal anterior wedging, but pressure in the nucleus of the adjacent disc was reduced by 65.2% on average, and relatively elevated in the annulus and neural arch. Subsequent cyclic loading then caused anterior wedge deformity of the vertebral body, with the height of the anterior and posterior cortex decreasing by 34.3% (13.2) and 12.7% (7.5) respectively, and wedge angle increasing from 5.0° (3.76) to 11.4° (3.93) (all p<0.001). Discussion and Conclusion. Our hypothesis is supported: initial minor damage facilitates progressive anterior wedge deformity by transferring compressive loading on to the anterior cortex. Detecting initial endplate damage is important to minimise subsequent vertebral deformity in patients with osteoporosis. 256 words (250 excluding section headings) Acknowledgements Funding was provided by a Royal College of Surgeons of England Research Fellowship and by the Gloucestershire Arthritis Trust