Articulating cartilage experiences a multitude of biophysical cues. Due to its primary function in distributing load with near frictionless articulation, it is clear that a major stimulus for cartilage homeostasis and regeneration is the mechanical load it experiences on a daily basis. While these effects are considered when performing in vivo studies, in vitro studies are still largely performed under static conditions. Therefore, an increasing complexity of in vitro culture models is required, with the ultimate aim to recreate the articulating joint as accurately as possible. We have for many years utilized a complex multiaxial load bioreactor capable of applying tightly regulated compression and shear loading protocols. Using this bioreactor, we have been able to demonstrate the mechanical induction of human bone marrow stromal cell (BMSC) chondrogenesis in the absence of exogenous growth factors. Building on previous bioreactor studies that demonstrated the mechanical activation of endogenous TGFβ, and subsequent chondrogenesis of human bone marrow derived MSCs, we have been further increasing the complexity of in vitro models. For example, the addition of high molecular weight hyaluronic acid, a component of synovial fluid, culture medium leads to reduced hypertrophy and increased glycosaminoglycan deposition. The ultimate aim of all of these endeavors is to identify promising materials and therapies during in vitro/ ex vivo studies, therefore reducing the numbers or candidates that are finally tested using in vivo studies. This 3R approach can improve the opportunities for success while leading to more ethically acceptable product development pathways.
A three-dimensional computer model of a total hip replacement was used to examine the relationship between the position of the components, the range of motion and the prosthetic joint contact area. Horizontal acetabular positions with small amounts of acetabular and femoral anteversion provide the largest contact areas, but result in limited joint movement. These data will allow surgeons to select implant positions that will provide the largest possible joint contact area for a given joint range of motion although these are conflicting goals. In some component positions a truncated spherical prosthetic head resulted in smaller contact areas than a completely spherical head.
Translational models for OA have used a variety of small (mouse, rat) and large (sheep, pig) animal models to evaluate the efficacy of a specific therapy. Clinical trials based on the results of these animal models have yielded mixed results with respect to the treatment of the disease. Due to greater stringency in EU regulations in the use of animal models for research, ex vivo models of OA (e.g. cartilage explants, bioreactors) are being developed to mimic human
Cam-type femoroacetabular impingement is caused by bone excess on the femoral neck abutting the acetabular rim. This can cause cartilage and labral damage due to increased contact pressure as the cam moves into the acetabulum. However, the damage mechanism and the influence of individual mechanical factors (such as sliding distance) are poorly understood. The aim of this study was to identify the cam sliding distance during impingement for different activities in the hip
Background. Non-contact anterior cruciate ligament (ACL) injuries occurs with a higher incidence in female athletes compared with males after the onset of puberty. One anatomical factor with clinically observable differences between males and females is lower extremity alignment. The knee joint valgus in the coronal plane, which is associated with ACL injury risk, is composed of rotation of the tibia around the stationary femur and hip rotation combined with knee flexion. The purpose of this study was to prove the difference of hip rotation between female and male handball players with or without history of ACL injury. Methods. Elite collegiate athletes on the varsity handball team (17 females and 24 males) were recruited. Whereas 8 females and 1 male had a history of ACL injury, there were 9 females and 23 males with no history of ACL injury. The 6 measures of hip
The evaluation of knee stability is fundamental for the clinical discrimination between healthy and pathological joints, for the design and evaluation of prostheses and for the definition of articular models. Knee stability can be quantified by measuring the relation between applied single-axis constant loads and corresponding tibio-femoral displacements (i.e., translations and rotations), namely the joint stiffness, at a given flexion angle. No many studies are available in the literature on this topic [1–3]. In particular, the translations/rotations along/about directions different from the loaded one were not deeply investigated. A fresh frozen lower-limb specimen (female, 63 years old, weight 68 Kg, height 158 cm) was considered. The forefoot and all soft tissues outside the knee were removed by a surgeon, keeping the knee joint capsule intact. A stereophotogrammetric system (Vicon Motion Systems Ltd.) was used to measure the femoro-tibial relative motion by two trackers fixed to the bones, thus introducing no soft-tissue artifact. The specimen was then mounted on a test rig capable to exert general loading conditions [4], and constant loads were applied to the tibia: ±100 N in antero-posterior (AP) and medio-lateral (ML) direction; ±10 Nm about abb-adduction (AA) and in-external (IE) rotations. Loads were applied approximately at the mid-point between the lateral and medial epicondyles, and were kept constant while the femur was flexed over a 135° range. Displacements were defined with respect to the
Introduction. The medial patellofemoral ligament (MPFL) is the main stabilizer of the patella and therefore mostly reconstructed in the surgical correction of patellofemoral dislocation. Various biomechanical and clinical studies have been conducted on MPFL reconstruction, while the patellofemoral contact pressure (PFCP) which is indicated as one of the predictors of retropatellar osteoarthritis was neglected. Therefore, the aim of this study was to investigate how different MPFL reconstruction approaches affect PFCP. Material & Methods. After radiographic examination and preparation six human cadaveric knee joints (52.1 ± 8.4yrs) were placed in a 6-DOF knee simulator. Three flexion-extension cycles (0–90°) were applied, while the extensor muscles (175N) and an axial joint load (200N) were simulated. PFCP was measured in knee flexion of 0°, 30° and 90° using a calibrated pressure measurement system (K-Scan, Tekscan Inc., USA). The following MPFL conditions were examined: native (P. nat. ), anatomical reconstruction (P. a. ), proximal and distal patellar single-bundle reconstruction (P. p. , P. d. ), proximal and ventral femoral reconstruction (F. p. , F. v. ). The cohesive gracillis graft of each knee was used for MPFL reconstruction. Further, the effect of three different graft pre-tensioning levels (2N, 10N, 20N) on the PFCP were compared. Nonparametric statistical analysis was performed using SPSS (IBM Inc., USA). Results. In 0° knee flexion median PFCP of the native state (P. nat. =0.46MPa) was significantly higher (p=0.04) compared to the ventral femoral fixation state (F. v. =0.24MPa). No significant differences were observed in 30° knee flexion. In 90° knee flexion PCFP of both femoral reconstructions (F. p. =1.26MPa, F. v. =1.12MPa) were significantly higher (p<0.04) compared to the native state (P. nat. =0.43MPa). Graft pre-tensioning had no significant impact (p>0.27) on the PFCP in 0°, 30° and 90° knee flexion for all pre-tensioning levels. Discussion. We investigated the PFCP of different MPFL reconstructions and compared them during continuous
Background. Severe hallux rigidus can be treated with total or hemi arthroplasty to preserve motion in the 1st metatarsophalangeal joint (MTPJ). Decreased dorsiflexion impairs the rollover motion of the 1st MTPJ and recent studies of patients with 1st MTPJ osteoarthritis show increased plantar forces on the hallux. Objectives. Our aim was to examine the plantar force variables under the hallux and the 1st, 2nd, and 3rd – 5th distal metatarsal head (MH) on patients operated with a proximal hemiarthroplasty (HemiCap) in the 1st MTPJ and compare to a control group of healthy patients. Secondary aims: To examine correlations between the force and the 1st MTPJ range of motion (ROM) and pain. Study Design & Methods. Seventy patients operated with HemiCap were invited. 41 were included, (10 men, 31 women), median operation date 2011(range 2007–2014), age 63(47–78), 37 unilateral and 4 bilateral. Dorsal ROM of the 1st MTPJ was measured by goniometer and by x-ray. Pain evaluated by visual analog scale (VAS 1–10) during daily activities (DA) and during testing (DT). Emed (Novel) Foot Pressure Mapping system was used to measure peak force (N) and force/time integral (N/s) under the hallux, 1st and 2nd and 3–5th metatarsal heads (MH). Statistics: Force variables between operated feet and control group were compared by independent two-sample t-test or Wilcoxon rank sum test. Force variables association to ROM and pain by linear regression models. Results. Median (range) for HemiCap/Control group: Peak force (N): Hallux: 12(1–26)/20(4–30), 1st MH: 17(8–41)/24(14–42), 2nd MH 24(15–37)/28(24–37), 3rd–5th MH: 27(18–36)/30(25–35). Force/time integral (N/s): Hallux: 1(1–4)/4(1–12), 1st MH: 5(2–18)/7(3–11), 2nd MH 8(4–13)/10(7–13), 3rd–5th MH: 9(6–15)/10(8–14). Significant difference between HemiCap patients and healthy controls in peak force and force/time integral was found under the hallux (p<0.01), 1st (p<0.05) and 2nd MH (p<0.05), and max force under the 3–5th MH (p<0.01). Dorsal ROM of the operated feet was 45 degrees (10–75) by goniometer and 41 degrees (16–70) by x-ray. An increase in dorsal ROM decreased the peak force and force/time integral under the hallux (p>0.05) but not under the MHs. Most patients reported no pain (VAS 1: 62% DA, 78% DT), only 2 patients reported VAS>3. No significant correlation between pain and force or force/time integral. Conclusions. A mid-term hemiarthroplasty do not restore the
Background. Biomechanical joint contact pressure distribution measurements have proven to be a very valuable tool in orthopaedic research to investigate the influence of surgical techniques such as total knee arthroplasty (TKA) on the human knee joint. Quantification of the in vitro tibiofemoral and patellofemoral contact pressure distribution before and after the intervention are an important measure to evaluate the impact of the surgery. The K scan pressure sensor from Tekscan (South Boston USA) is a commonly reported device for these in vitro pressure measurements. Despite the large interest in the sensor, the effective measurement accuracy for in vitro biomechanical joint contact measurement still remains a big question and therefore the reliability of these measurements should be questioned. Methods. Reliable contact pressure measurements can only be done if the sensor behaviour is fully understood. Therefore, a tailored multi-axial testing machine has been designed to profoundly investigate and characterise the sensor behaviour. This test setup is unique through its ability to apply a predefined tangential force or sliding velocity to the sensor's interface next to a normal force. Dynamic effects occurring in knee
Total ankle replacement (TAR) is the main surgical option in case of severe joint osteoarthritis. The high failure rate of current TAR is often associated to inappropriate prosthetic articulating surfaces designed according to old biomechanical concepts such the fixed axis of rotation, thus resulting in non-physiological
In total knee replacement (TKR), neutral mechanical alignment (NMA) is targeted in prosthetic component implantation. A novel implantation approach, referred to as kinematic alignment (KA), has been recently proposed (Eckhoff et al. 2005). This is based on the pre-arthritic lower limb alignment which is reconstructed using suitable image-based techniques, and is claimed to allow better soft-tissue balance (Eckhoff et al. 2005) and restoration of physiological joint function. Patient-specific instrumentation (PSI) introduced in TKR to execute personalized prosthesis component implantation are used for KA. The aim of this study was to report knee kinematics and electromyography (EMG) for a number lower limb muscles from two TKR patient groups, i.e. operated according to NMA via conventional instrumentation, or according to KA via PSI. 20 patients affected by primary gonarthrosis were implanted with a cruciate-retaining fixed-bearing prosthesis with patella resurfacing (Triathlon® by Stryker®, Kalamazoo, MI-USA). 17 of these patients, i.e. 11 operated targeting NMA (group A) via convention instrumentation and 6 targeting KA (group B) via PSI (ShapeMatch® by Stryker®, Kalamazoo, MI-USA), were assessed clinically using the International Knee Society Scoring (IKSS) System and biomechanically at 6-month follow-up. Knee kinematics during stair-climbing, chair-rising and extension-against-gravity was analysed by means of 3D video-fluoroscopy (CAT® Medical System, Monterotondo, Italy) synchronized with 4-channel EMG analysis (EMG Mate, Cometa®, Milan, Italy) of the main knee ad/abductor and flexor/extensor muscles. Knee
Background. Surgical resection of middle facet tarsal coalition is a well documented treatment option in symptomatic individuals that do not respond to conservative treatment. The ability to return to full recreational activity post resection may have implications on foot biomechanics and possibly degenerative changes in the subtalar and adjacent joints. Hypothesis. Open resection of middle facet tarsal coalitions should improve subtalar
This study aimed to explore the role of miR-320a in the pathogenesis of osteoarthritis (OA). Human cartilage cells (C28/I2) were transfected with miR-320a or antisense oligonucleotides (ASO)-miR-320a, and treated with IL-1β. Subsequently the expression of collagen type II alpha 1 (Col2α1) and aggrecan (ACAN), and the concentrations of sulfated glycosaminoglycans (sGAG) and matrix metallopeptidase 13 (MMP-13), were assessed. Luciferase reporter assay, qRT-PCR, and Western blot were performed to explore whether pre-B-cell leukemia Homeobox 3 (PBX3) was a target of miR-320a. Furthermore, cells were co-transfected with miR-320a and PBX3 expressing vector, or cells were transfected with miR-320a and treated with a nuclear factor kappa B (NF-κB) antagonist MG132. The changes in Col2α1 and ACAN expression, and in sGAG and MMP-13 concentrations, were measured again. Statistical comparisons were made between two groups by using the two-tailed paired Objectives
Methods