Summary

45S5 bioactive glass combined with hMSC did not permit de novo ectopic bone formation. Such absence of osteogenicity was most likely due to the alkalinization of the 45S5 microenvironment that affects adversely the osteogenic differentiation of stem/precursor cells.

Bone marrow stromal cells (BMSCs) are capable of bone formation and can promote the repair of osseous defects when implanted in appropriate scaffolds. The most promising biomaterials for application in bone tissue engineering (TE) are hydroxyapatite (HA), tricalcium phosphate (TCP), calcium carbonate (coral) ceramics or bioactive glasses (BG) because of their osteoconductive properties and ability to enhance bone formation. However, information regarding the osteogenic potential of hBMSCs in combination with BG scaffolds is strikingly lacking in the TE field. The present study focused on evaluating the osteogenicity of bone constructs prepared from particles of 45S5 BG combined with hBMSCs in comparison with biphasic HA/TCP or coral particles, in a mouse ectopic model.

The in vivo osteogenicity was then correlated with various aspects of the effects of the scaffold materials tested on hBMSCs functions pertinent to bone tissue formation. Particular attention was given to the pH in the microenvironment where the cells reside in TE constructs and its effect on the osteoblastic differentiation of hBMSCs. In vivo experiments evidenced that 45S5 BG constructs with hBMSCs failed to form ectopic bone. In contrast, the cell constructs prepared with either HA/TCP or coral ceramics displayed great and consistent capacity for the ectopic bone formation. The cytocompatibility of hBMSCs on BG material was addressed and no differences were evidenced between HA/TCP and coral substrates related to the adhesion of hBMSCs and their proliferation in vitro. The hBMSCs viability was even higher within the 45S5 BG-containing constructs compared to the other two types of material constructs tested both in vitro and in vivo. These findings indicated that the absence of de novo bone formation in the hBMSCs-containing 45S5 BG constructs was not the result of cytotoxic effects of the BG material.

The potential of osteogenic differentiation of hBMSCs cultured on material substrates was next addressed and the ALP activity of hBMSCs was significantly diminished when these cells were cultured on 45S5 BG as compared to either HA/TCP or coral substrates. Because BG materials are well-known for causing external alkalinisation, the pH was specifically measured in TE constructs. The pH inside the cell-containing BG constructs, measured ex vivo, was 8.0 (i.e. 0.4–0.5 units more alkaline than that measured in the coral- or HA/TCP-constructs). The impact of such external alkalinisation on the osteogenic differentiation of hBMSCs was assessed by culturing the cells over a wide range of alkaline pH. The hBMSCs expression of osteogenic markers, ALP activity and mineralization were not significantly affected at moderate external alkaline pH (≤ 7.90) but were dramatically inhibited at higher pH.

Altogether, these findings provided evidence that despite 45S5 BG are reported to be good osteoconductive materials, they are not necessarily good scaffolds for TE, most likely due to the alkalinization of the 45S5 microenvironment that affects adversely the osteogenic differentiation of precursor cells. Controlling the shifts of pH in the local engineered extracellular environment is a critical issue for the development of bioactive TE scaffolds.

Human bone-marrow mesenchymal stem cells have an important role in the repair of musculoskeletal tissues by migrating from the bone marrow into the injured site and undergoing differentiation. We investigated the use of autologous human serum as a substitute for fetal bovine serum in the ex vivo expansion medium to avoid the transmission of dangerous transfectants during clinical reconstruction procedures. Autologous human serum was as effective in stimulating growth of bone-marrow stem cells as fetal bovine serum. Furthermore, medium supplemented with autologous human serum was more effective in promoting motility than medium with fetal bovine serum in all cases. Addition of B-fibroblast growth factor to medium with human serum stimulated growth, but not motility. Our results suggest that autologous human serum may provide sufficient ex vivo expansion of human bone-marrow mesenchymal stem cells possessing multidifferentiation potential and may be better than fetal bovine serum in preserving high motility

While high-performance ceramics like alumina and zirconia exhibit excellent wear resistance, they provide poor osseointegration capacity. As osseointegration is crucial for non-cemented joint prostheses, new techniques have been successfully developed for biofunctionalizing high-performance ceramic surfaces. Stable cell adhesion can be achieved by covalently bound specific peptides. In this study we investigate the effect of sterilization processes on organo-chemically functionalized surfaces. To enhance the performance of alumina-toughened zirconia ceramics (ATZ), a 3-aminopropyldiisopropylethoxysilane (APDS) monolayer was applied and coupled with cyclo-RGD peptides (cRGD) by using bifunctional crosslinker bis(sulfosuccinimidyl)suberat (BS³). The samples were sterilized using e-beam or gamma-sterilization at 25 kGy, either before or after biofunctionalization with cRGD. Functionalization stability was investigated by contact angle measurements. The functionality of cRGD after sterilization was demonstrated using proliferation tests and cytotoxicity assays. Immunofluorescence staining (pFAK, Actin, DAPI) was conducted to evaluate the adhesion potential between the samples and human mesenchymal stem cells (hMSCs). Functionalized samples before and after sterilization showed no significant difference regarding their contact angles. A proliferation test demonstrated that the cells on functionalized samples proliferate significantly more than on untreated samples before and after sterilization. hMSCs showed a significant higher proliferation on gamma sterilized samples compared to all other groups after 14 days. It was confirmed that the samples did not exhibit cytotoxic behavior before or after sterilization. Fluorescence microscopy demonstrated that both, cells on sterilized and on non-sterilized samples, expressed high levels of pFAK-Y397. The investigated functionalization enables improved adhesion and proliferation of hMSCs and is stable against the investigated sterilization processes. This is of importance as the option of having a sterile product enables the start of the translation of this biofunctional coating towards preclinical and subsequently first-in-man applications. Acknowledgments: We acknowledge the financial support of the Federal Ministry of Education and Research, BMBF (13GW0452A-C)

The regenerative capacity of hyaline cartilage is greatly limited. To prevent the onset of osteoarthritis, cartilage defects have to be properly treated. Cartilage, tissue engineered by mean of bioactive glass (BG) scaffolds presents a promising approach. Until now, conventional BGs have been used mostly for bone regeneration, as they are able to form a hydroxyapatite (HA) layer and are therefore, less suited for cartilage reconstruction. The aim of this study is to compare two BGs based on a novel BG composition tailored specifically for cartilage (CAR12N) and patented by us with conventional BG (BG1393) with a similar topology. The highly porous scaffolds consisting of 100% BG (CAR12N, CAR12N with low Ca2+/Mg2+ and BG1393) were characterized and dynamically seeded with primary porcine articular chondrocytes (pACs) or primary human mesenchymal stem cells (hMSCs) for up to 21 days. Subsequently, cell viability, DNA and glycosaminoglycan contents, cartilage-specific gene and protein expression were evaluated. The manufacturing process led to a comparable high (over 80%) porosity in all scaffold variants. Ion release and pH profiles confirmed bioactivity for them. After both, 7 and 21 days, more than 60% of the total surfaces of all three glass scaffold variants was densely colonized by cells with a vitality rate of more than 80%. The GAG content was significantly higher in BG1393 colonized with pACs. In general, the GAG content was higher in pAC colonized scaffolds in comparison to those seeded with hMSCs. The gene expression of cartilage-specific collagen type II, aggrecan, SOX9 and FOXO1 could be detected in all scaffold variants, irrespectively whether seeded with pACs or hMSCs. Cartilage-specific ECM components could also be detected at the protein level. In conclusion, all three BGs allow the maintenance of the chondrogenic phenotype or chondrogenic differentiation of hMSCs and thus, they present a high potential for cartilage regeneration

Bone homeostasis is a highly regulated process involving pathways in bone as WNT, FGF or BMP, but also requiring support from surrounding tissues as vessels and nerves. In bone diseases, the bone-vessel-nerve triad is impacted. Recently, new players appeared as regulators of bone homeostasis: microRNAs (miRNA). Five miRNAs associated with osteoporotic fractures are already known, among which miR-125b is decreasing bone formation by downregulating human mesenchymal stem cells (hMSCs) differentiation. Other miRNAs, as miR-214 (in cluster with miR-199a), are secreted by osteoclasts to regulate osteoblasts and inhibit bone formation. This forms a very complex regulatory network. hMSCs and osteoblasts (n=3) were transfected with mimic/antagomiR of miR-125b, miR-199a-5p or miR-214, or with a scrambled miRNA (negative control) in osteogenic differentiation calcium-enriched medium (Ca++). Mineralization was assessed by Alizarin Red/CPC staining, miRNA expression by qPCR and protein by western blotting. Exposure of hMSCs or osteoblasts to Ca++ increased mineralization compared to basal medium. hMSCs transfected with miR-125b mimic in Ca++ presented less mineralization compared to scramble. This correlated with decreased levels of BMPR2 and RUNX2. hMSCs transfected with miR-125b inhibitor presented higher mineralization. Interestingly, hMSCs transfected with miR-214 mimic in Ca++ presented no mineralization while miR-214 inhibitor increased mineralization. No differences were observed in hMSCs transfected with miR-199a-5p modulators. On the contrary, osteoblasts transfected with miR-199a-5p mimic present less mineralization than scrambled-transfected and same was observed for miR-214 and miR-125b mimics. We highlight that miR-125b and miR-214 decrease mineralization of hMSCs in calcium-enriched medium. We noticed that miR-199a-5p is able to regulate mineralization in osteoblasts but not in hMSCs suggesting that this effect is cell-specific. Interestingly, the cluster miR-199a/214 is known as modulator of vascular function and could thus contribute to bone remodeling via different ways. With this work we slightly open the door to possible therapeutic approaches for bone diseases

Minimally invasive surgery for the restoration of bone tissues lost due to diseases and trauma is preferred by the health care system as the related costs are continuously increasing. Recently, efforts have been paid to optimize injectable calcium phosphate (CaP) cements which have been recognized as excellent alloplastic material for osseous augmentation because of their unique combination of osteoconductivity, biocompatibility and mouldability. The sol-gel synthesis approach appears to be the most suitable route towards performing injectable calcium phosphates. Different strategies used to prepare bioactive and osteoinductive injectable CaP are reported. CaP gels complexed with phosphoserine-tethered poly(ε-lysine) dendrons (G3-K PS) designed to interact with the ceramic phase and able to induce osteogenic differentiation of human mesenchymal stem cells (hMSCs) is discussed. Recently, attention has been given to the modification of hydroxyapatite with Strontium (Sr) due to its dual mode of action, simultaneously increasing bone formation (stimulating osteoblast differentiation) while decreasing bone resorption (inhibiting osteoclast differentiation). The effect of systems based on strontium modified hydroxyapatite (Sr-HA) at different composition on proliferation and osteogenic differentiation of hMSC is described. One more approach is based on the use of antimicrobial injectable materials. It has been demonstrated that some imidazolium, pyridinium and quaternary ammonium ionic liquids (IL) have antimicrobial activity against some different clinically significant bacterial and fungal pathogens. Here, we report several systems based on IL at different alkyl-chain length incorporated in Hydroxyapatite (HA) through the sol-gel process to obtain an injectable material with simultaneous opposite responses toward osteoblasts and microbial proliferation

Summary. Within hours after exposure to hypoxic circumstances hMSCs start producing AGFs. Initially hypoxia does not affect hMSC proliferation and metabolic activity, but after 7 days both are decreased, compared to hMSCs cultured under ambient oxygen conditions. Introduction. At the moment of implantation of a large cell seeded scaffold, usually a vascular network is lacking within the scaffold. Therefore, the cells seeded on the scaffold are exposed to hypoxic circumstances. Human mesenchymal stem cells (hMSCs) exposed to hypoxic circumstances, start to produce angiogenic factors (AGF). 1. and to proliferate faster than at ambient oxygen levels. 2. Under severe, continued hypoxia, hMSC metabolism slows down and ultimately stops. 3. We hypothesise that there is a threshold oxygen level above which hMSCs at hypoxia will both produce AGF and still proliferate, and below which cells slow down their metabolism. If hMSCs are provided with oxygen levels just above this threshold, effective tissue regeneration, which requires cell proliferation and vascular ingrowth, may be accomplished. Methods. Human mesenchymal stem cells (hMSCs) were isolated using Ficoll density gradient centrifugation from reaming debris that was collected during total hip replacement. Experiments were performed in a hypoxic chamber at 5% CO. 2. and 1%, 2%, 3%, 4%, 6%, 8% and 10% O. 2. , temperature was 37°C and humidity was 100%. The cells were transfected with a pCDNA\HRE-luciferase 2 plasmid to find the oxygen range at which hMSCs start producing AGF. Subsequently, AGF production was quantified using qPCR. Cell proliferation and cell metabolism rate under hypoxic circumstances was assayed using the CyQuant DNA quantification method and a (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, respectively. Results. In hMSCs cultured at 1% O. 2. , the hypoxia responsive element was activated. A selection of AGFs was expressed at 1%, 2% and 3% O. 2. AGF production started four hours after exposure to hypoxic circumstances commenced. Initially, at 1 day of exposure to hypoxia, cell proliferation and cell metabolic activity were not influenced by hypoxia. After 7 days, hMSC proliferation and metabolic activity were lower in cells grown under hypoxic circumstances than in cells grown under ambient oxygen circumstances. Discussion/Conclusion. The threshold level above which hMSCs at hypoxia will both produce AGF and still proliferate seems lower than 1% O. 2. Within hours after exposure to hypoxic circumstances hMSCs start producing AGFs. Initially, hMSC proliferation and metabolic activity were not affected by hypoxia, but after 7 days both proliferation and metabolic activity were decreased compared to hMSCs cultured under ambient oxygen circumstances

Objectives. Regenerative medicine is an emerging field aimed at the repair and regeneration of various tissues. To this end, cytokines (CKs), growth factors (GFs), and stem/progenitor cells have been applied in this field. However, obtaining and preparing these candidates requires invasive, costly, and time-consuming procedures. We hypothesised that skeletal muscle could be a favorable candidate tissue for the concept of a point-of-care approach. The purpose of this study was to characterize and confirm the biological potential of skeletal muscle supernatant for use in regenerative medicine. Methods. Semitendinosus muscle was used after harvesting tendon from patients who underwent anterior cruciate ligament reconstructions. A total of 500 milligrams of stripped muscle was minced and mixed with 1 mL of saline. The collected supernatant was analysed by enzyme-linked immunosorbent assay (ELISA) and flow cytometry. The biological effects of the supernatant on cell proliferation, osteogenesis, and angiogenesis in vitro were evaluated using human mesenchymal stem cells (hMSCs) and human umbilical cord vein endothelial cells (HUVECs). Results. The supernatant contained several GFs/CKs, with especially high levels of basic fibroblast growth factor, and CD34+ cells as the stem/progenitor cell fraction. With regard to biological potential, we confirmed that cell proliferation, osteoinduction, and angiogenesis in hMSCs and HUVECs were enhanced by the supernatant. Conclusions. The current study demonstrates the potential of a new point-of-care strategy for regenerative medicine using skeletal muscle supernatant. This attractive approach and readily-available material could be a promising option for tissue repair/regeneration in the clinical setting. Cite this article: M. Yoshikawa, T. Nakasa, M. Ishikawa, N. Adachi, M. Ochi. Evaluation of autologous skeletal muscle-derived factors for regenerative medicine applications. Bone Joint Res 2017;6:277–283. DOI: 10.1302/2046-3758.65.BJR-2016-0187.R1

The use of stem cells transplanted into the intervertebral disc (IVD) is a promising regenerative approach to treat intervertebral disc degeneration (IDD). The aim of this study was to assess the effect of a hydrogel composed of hyaluronic acid (HA) and platelet-rich plasma (PRP) loaded with human mesenchymal stem cells (hMSCs), on IVD extracellular matrix synthesis and nucleus pulposus (NP) marker expression in a whole IVD culture model. HA was blended with batroxobin (BTX), a gelling agent activated in presence of PRP to construct a hydrogel. Bovine IVDs (n=25) were nucleotomised and filled with 1×10. 6. or 2×10. 6. hMSCs suspended in ∼150 mL of the PRP/HA/BTX hydrogel. IVDs harvested at day 0 and nucleotomised IVDs with no hMSCs and/or hydrogel were used as controls. hMSCs alone or encapsulated in the hydrogel were also cultured in well plates to examine the effect of the IVD microenvironment on hMSCs. After 1 week, tissue structure, scaffold integration and gene expression of anabolic (collagen type I, collagen type II and aggrecan), catabolic (matrix metalloproteinase 3 – MMP-3 –, MMP-13 and a disintegrin and metalloproteinase with thrombospondin motifs 4) and NP cell (cytokeratin 19, carbonic anhydrase 12, cluster of differentiation 24) markers were assessed. Histological analysis showed a good integration of the scaffold within the NP area with cell repopulation. At the gene expression level, the hMSC-loaded hydrogels demonstrated to increase disc cell anabolic and catabolic marker expression and promoted hMSC differentiation towards a NP cell phenotype. This study demonstrated that the HA/PRP/BTX may represent a valid carrier for hMSCs being capable of stimulating cell activity and NP marker expression as well as achieving a good integration with the surrounding tissues

Introduction and Objective. Alveolar bone resorption following tooth extraction or periodontal disease compromises the bone volume required to ensure the stability of an implant. Guided bone regeneration (GBR) is one of the most attractive technique for restoring oral bone defects, where an occlusive membrane is positioned over the bone graft material, providing space maintenance required to seclude soft tissue infiltration and to promote bone regeneration. However, bone regeneration is in many cases impeded by a lack of an adequate tissue vascularization and/or by bacterial contamination. Using simultaneous spray coating of interacting species (SSCIS) process, a bone inspired coating made of calcium phosphate-chitosan-hyaluronic acid was built on one side of a nanofibrous GBR collagen membrane in order to improve its biological properties. Materials and Methods. First, the physicochemical characterizations of the resulting hybrid coating were performed by scanning electron microscopy, X-ray photoelectron, infrared spectroscopies and high-resolution transmission electron microscopy. Then human mesenchymal stem cells (MSCs) and human monocytes were cultured on those membranes. Biocompatibility and bioactivity of the hybrid coated membrane were respectively evaluated through MSCs proliferation (WST-1 and DNA quantification) and visualization; and cytokine release by MSCs and monocytes (ELISA and endothelial cells recruitment). Antibacterial properties of the hybrid coating were then tested against S. aureus and P. aeruginosa, and through MSCs/bacteria interactions. Finally, a preclinical in vivo study was conducted on rat calvaria bone defect. The newly formed bone was characterized 8 weeks post implantation through μCT reconstructions, histological characterizations (Masson's Trichrome and Von Kossa stain), immunohistochemistry analysis and second harmonic generation. Biomechanical features of newly formed bone were determined. Results. The resulting hybrid coating of about 1 μm in thickness is composed of amorphous calcium phosphate and carbonated poorly crystalline hydroxyapatite, wrapped within chitosan/hyaluronic acid polysaccharide complex. Hybrid coated membrane possesses excellent bioactivity and capability of inducing an overwhelmingly positive response of MSCs and monocytes in favor of bone regeneration. Furthermore, the antibacterial experiments showed that the hybrid coating provides contact-killing properties by disturbing the cell wall integrity of Gram-positive and Gram-negative bacteria. Its combination with MSCs, able to release antibacterial agents and mediators of the innate immune response, constitutes an excellent strategy for fighting bacteria. A preclinical in vivo study was therefore conducted in rat calvaria bone defect. μCT reconstructions showed that hybrid coated membrane favored bone regeneration, as we observed a two-fold increase in bone volume / total volume ratios vs. uncoated membrane. The histological characterizations revealed the presence of mineralized collagen (Masson's Trichrome and Von Kossa stain), and immunohistochemistry analysis highlighted a bone vascularization at 8 weeks post-implantation. However, second harmonic generation analysis showed that the newly formed collagen was not fully organized. Despite a significant increase in the elastic modulus of the newly formed bone with hybrid coated membrane (vs. uncoated membrane), the obtained values were lower than those for native bone (approximately 3 times less). Conclusions. These significant data shed light on the regenerative potential of such bioinspired hybrid coating, providing a suitable environment for bone regeneration and vascularization, as well as an ideal strategy to prevent bone implant-associated infections

Human mesenchymal stem cells (MSCs) are multipotent stem cells with the ability to differentiate into mesoderm-type cells such as osteoblasts, chondroblast, tenocytes etc. They can be retrieved by different sources, but the number of cells obtained suggested the adipose tissue as a primary harvest site of MSCs. Cells can be harvested using the Coleman procedure, obtaining stromal vascular fraction (SVF), enriched with MSCs, after collagenase digestion. The availability of SVF storage has been envisioned for multiple treatments of the degenerated tissue. Indeed, the use of SVF has been introduced into clinical trials for tissue regeneration for orthopaedic patients. Difficulties of a selective delivery of SVF locally have been previously discussed. Thus, the use of biological scaffolds in order to better localize SVF in the tissue site has been studied. The methodological evolution for the use of SVF in the best possible biological conditions is a milestone for good clinical results

Numerous implanted hip and knee joint arthroplasties have to be replaced due to early or late loosening of the implant, a failure of osteointegration with fibrous tissue at the bone-implant-interface. This could be counteracted by ensuring that cells which attach to the implant surface differentiate towards bone cells afterwards. For this reason, human mesenchymal stem cells (hMSCs) will be included in this study. These cells are naturally available at the bone-implant-interface, multipotent and therefore ideal to study the osteoinductivity of a material. The goal of this pilot study was to test the cell response towards three different titanium grades with a novel surface structuring, as a first step towards achieving an improved implant surface for enhanced osteointegration. Disk-shaped titanium scaffolds with a diameter of 12 mm and a height of 1.2 mm were used. The surface topography (500 µm × 500 µm × 300 µm pores) was generated via laser treatment of the surface. By using nanosecond pulsed laser technique, a rough surface with micro- and nanostructural (titanium droplets) features was automatically formed. Three different batches made of commercially pure titanium grades 1 and 2 (Ti1/Ti2) or Ti6Al4V alloy grade 5 (Ti5) were produced. Four cell types were analysed on these batches: primary hMSCs from one donor (m, 25 y), periosteum derived cells (PDCs), human osteoblasts (hOBs) and periodontal ligament cells (PDLs). Cells were seeded on Ti1, Ti2 and Ti5 scaffolds in triplicates. Resazurin assay to examine cell viability was conducted with all cell types. Measurements were executed on several days after seeding, from day one up to day 14. Actin staining as well as live/dead staining was performed with hMSCs cultured on titanium for 1, 3, 5 or 7 days. The cell viability assay revealed early turning points of growth for osteogenic hOBs (day 3) and PDCs (day 7). HMSCs grew steadily on the material and non-osteogenic PDLs stayed in plateau throughout the cultivation period. With respect to the material, cells demonstrated better proliferation on Ti1 and Ti2 than on Ti5. Live/dead staining showed a high survival rate of hMSCs at each time point and on all three titanium grades, with a neglectable number of dead cells. Actin staining confirmed an enhanced spreading and stretching of hMSCs on Ti1 and Ti2 compared to hMSCs on Ti5. Our pilot data indicates that cells react to different titanium compositions, revealed by increased proliferation on commercially pure titanium (Ti1/2). Furthermore, our results demonstrate that osteogenic cells prefer the novel surface structuring in comparison to non-osteogenic PDL cells, which stayed in plateau. The turning points of growth (hOBs/PDCs) suggest an osteosupportiveness of the surface. Although hMSCs did not show a turning point in growth, their growth was steady and resulted in the highest number of cells along with a well stretched morphology. Due to their good proliferation and response to the material, hMSCs are currently being used for evaluating the osteogenic potential of the novel scaffolds

Cells directly probe and respond to the physicomechanical properties of their extracellular environment, a dynamic process which has been shown to play a key role in regulating both cellular adhesive processes and differential function. Recent studies indicate that stem cells show lineage-specific differentiation when cultured on substrates approximating the stiffness profiles of specific tissues. Although tissues are associated with ranging Young's modulus values for bulk rigidity, at the sub-cellular level, and particularly at the micro- and nanoscales, tissues are comprised of heterogeneous distributions of rigidity. Lithographic processes have been widely explored in cell biology for the generation of analytical substrates to probe cellular physicomechanical responses. In this work, we show for the first time that that direct-write e-beam exposure can significantly alter the rigidity of elastomeric PDMS substrates and develop a new class of two-dimensional elastomeric substrates with controlled patterned rigidity ranging from the micron to the nanoscale. The mechano-response of human mesenchymal stem cells to e-beam patterned substrates was subsequently probed in vitro and significant modulation of focal adhesion formation and osteochondral lineage commitment was observed as a function of both feature diameter and rigidity, establishing the groundwork for a new generation of biomimetic material interfaces

The recent description of progenitor/stem cells in degenerated intervertebral discs (IVDs) raised the possibility of harnessing their regenerative capacity for endogenous repair. The aim of this work is to develop an intradiscal polysaccharide microbead-based delivery system for the sequential release of chemokines and nucleopulpogenic factors. This delivery system would sequentially contribute to 1) the recruitment of resident progenitors (CXCL12 or CCL5), 2) the differentiation of the mobilized progenitors (TGF-β1 and GDF5), and 3) the subsequent regeneration of NP. To determine the effects of chemokines on in vitro cell recruitment, human mesenchymal stem cells (MSC) were cultured in Transwells for 4h, with or without CXCL12 or CCL5. In parallel, pullulan microbeads (PMBs) (100µm) were prepared by a simultaneous crosslinking protocol coupled to a water-in-oil emulsification process. Freeze-dried PMBs were loaded with biological factors then release assays were performed at 37°C for 21 days and supernatant concentrations were measured by ELISA. As compared to untreated MSC, MSC migration was improved with a 3.9 (CXCL12) and 7.5 (CCL5) fold increase, respectively. All factors were successfully adsorbed on PMBs and a burst release within the 1. st. day was observed. At day 7, 27.5% and 83% of CXCL12 and CCL5 were released, respectively and at day 21, 20% and 100% of TGF-β1 and GDF5 were released, respectively. Currently, released cytokine bioactivity is being analysed and an ex vivo ovine IVD model is developed to determine the repair potential of this controlled release approach

Human mesenchymal stem cells are considered the golden standard for clinical application in regenerative medicine for their multilineage differentiation potential, best candidates to treat diseases such as osteoarthritis and osteogenesis imperfecta. In the past few years several molecules have been described to induce the hMSCs differentiation into osteo cell progenitors, mainly discovered by screening of single metabolites bioactivity. However, hMSCs osteogenic differentiation potential is still poor, and the discovery of differentiation inducers with high efficiency is needed. Thanks to automated processes, High Throughput Screening (HTS) strategies shorten the metabolites bioactivity investigation timeline, allowing testing of many molecules simultaneously. In this work, reliable assays for natural products bioactivity investigation detection were developed using HTS methodologies and validated by testing 15 purified compounds derived by marine fungi and sponges. The HTS cytotoxicity investigation using HepG2 cells allowed to test in a single experiment, 15 metabolites in 4 concentrations ranging from 1 to 20µM. Low cytotoxicity was detected for metabolites concentrations from 1 to 10µM and so set as treatment concentrations to be tested in further assays. Anti-inflammatory bioactivity was tested on THP1 cells triggered by LPS. Five out of 15 metabolites showed to prevent the LPS induced THP1 inflammatory activation by lowering the TNF-α production. The metabolites pro-osteogenic potential was investigated using hMSCs: their differentiation was evaluated by calcium mineralization after 10 days differentiation. Pro-osteogenic molecules were not detected in this screening, but the method validation represents a powerful tool for future natural product and synthetic molecules libraries screenings

Bone regenerative medicine aims at designing biomimetic biomaterials able to guide stem cells fate towards osteoblast lineage and prevent orthopaedic common pathogen adhesion. Owing to bone inorganic/organic composition, we herein report, using a versatile process based on simultaneous spray coating of interacting species, a calcium phosphate (CaP) / chitosan (CHI) / hyaluronic acid (HA) functionalized collagen membrane as a new strategy for bone regenerative medicine. Physicochemical characterizations of CaP-CHI-HA coating were performed by scanning electron microscopy, X-ray photoelectron and infrared spectroscopies and high-resolution transmission electron microscopy, revealing the formation of a thin coating mainly composed of non-stoichiometric crystalline hydroxyapatite dispersed into polymorphic organic film. Biocompatibility of CaP-CHI-HA coated membrane, evaluated after 7 days in contact with human mesenchymal stem cells (MSCs), showed spread, elongated and aligned cells. Metabolic activity and DNA quantification studies showed an increase in MSCs proliferation on coated membrane compared to uncoated membrane over the study time. Similarly, cytokines (IL-6, IL-8, osteoprotegerin) and growth factors (VEGF, bFGF) release in supernatant, as well as endothelial cells recruitment, were significantly increased in presence of CaP-CHI-HA coated membrane. Thus, CaP-CHI-HA coated membrane provides a suitable environment for MSCs to induce bone healing. Moreover, pro-inflammatory cytokines (IL-1β and TNF-α) secretion by human monocytes was significantly reduced on CaP-CHI-HA coating compared to LPS stimulation. CaP-CHI-HA coating also reduced significantly Staphylococcus aureus and Pseudomonas aeruginosa adhesion on the membrane, conferring a bacterial anti-adhesive surface. Based on our results, CaP-CHI-HA functionalized collagen membrane provides an interesting material for bone regeneration

Polyether ether ketone (PEEK) has been increasingly employed as biomaterials for trauma, orthopeadic, and spinal implants. However, concern has been raised about the inertness of PEEK which limits bone integration. In this study, we have coated PEEK with a functional material seeking to promote osteogenic differentiation of human mesenchymal stem cells (hMSC). We have used spray drying to coat poly(ethyl acrylate) (PEA) as a coating on PEEK. This technique is simple, allows a range of controlled coating thicknesses (from hundred nm to a few um), cost effective and easily translatable to scaffolds or implant surfaces for existing or new orthopaedic applications. PEA induces the organisation of fibronectin (FN) into nanonetworks upon simple adsorption from protein solutions. These FN nanonetworks on PEA represent a microenvironment for efficient growth factor binding and presentation in very low but effective doses. In this study we show cell adhesion and stem cell differentiation towards an osteogenic lineages when bone morphogenetic protein 2 (BMP2) was adsorbed on these engineered PEEK/PEA/FN microenvironments in very low doses. Overall, the developed functional coatings on PEEK has the potential to allow the translation of this material into orthopaedic applications

The current procedures being applied in the clinical setting to address osteoporosis-related delayed union and nonunion bone fractures have been found to present mostly suboptimal outcomes. As a result, bone tissue engineering (BTE) solutions involving the development of implantable biomimetic scaffolds to replace damaged bone and support its regeneration are gaining interest. The piezoelectric properties of the bone tissue, which stem primarily from the significant presence of piezoelectric type I collagen fibrils in the tissue's extracellular matrix (ECM), play a key role in preserving the bone's homeostasis and provide integral assistance to the regeneration process. However, despite their significant potential, these properties of bone tend to be overlooked in most BTE-related studies. In order to bridge this gap in the literature, novel hydroxyapatite (HAp)-filled osteoinductive and piezoelectric poly(vinylidene fluoride-co-tetrafluoroethylene) (PVDF-TrFE) electrospun nanofibers were developed to replicate the bone's fibrous ECM composition and electrical features. Different HAp nanoparticle concentrations (1–10%, wt%) were tested to assess their effect on the physicochemical and biological properties of the resulting fibers. The fabricated scaffolds displayed biomimetic collagen fibril-like diameters, while also presenting mechanical features akin to type I collagen. The increase in HAp presence was found to enhance both surface and piezoelectric properties of the fibers, with an improvement in scaffold wettability and increase in β-phase nucleation (translating to increased piezoelectricity) being observed. The HAp-containing scaffolds also exhibited an augmented bioactivity, with a more comprehensive surface mineralization of the fibers being obtained for the scaffolds with the highest HAp concentrations. Improved osteogenic differentiation of seeded human mesenchymal stem/stromal cells was achieved with the addition of HAp, as confirmed by an increased ALP activity, calcium deposition and upregulated expression of key osteogenic markers. Overall, our findings highlight, for the first time, the potential of combining PVDF-TrFE and HAp to develop electroactive and osteoinductive nanofibers for BTE. Acknowledgements: The authors thank FCT for funding through the projects InSilico4OCReg (PTDC/EME-SIS/0838/2021), OptiBioScaffold (PTDC/EME-SIS/4446/2020) and BioMaterARISES (EXPL/CTM-CTM/0995/2021), the PhD scholarship (2022.10572.BD) and to the research institutions iBB (UIDB/04565/2020 and UIDP/04565/2020) and Associate Laboratory i4HB (LA/P/0140/2020)

Bone defects can result from different incidents such as acute trauma, infection or tumor resection. While in most instances bone healing can be achieved given the tissue's innate ability of self-repair, for critical-sized defects spontaneous regeneration is less likely to occur, therefore requiring surgical intervention. Current clinical procedures have failed to adequately address this issue. For this reason, bone tissue engineering (BTE) strategies involving the use of synthetic grafts for replacing damaged bone and promoting the tissue's regeneration are being investigated. The electrical stimulation (ES) of bone defects using direct current has yielded very promising results, with neo tissue formation being achieved in the target sites in vivo. Electroactive implantable scaffolds comprised by conductive biomaterials could be used to assist this kind of therapy by either directing the ES specifically to the damaged site or promoting the integration of electrodes within the bone tissue as a coating. In this study, we developed novel conductive heat-treated polyacrylonitrile/poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PAN/PEDOT:PSS) nanofibers via electrospinning capable of mimicking key native features of the bone tissue's extracellular matrix (ECM) and providing a platform for the delivery of exogenous ES. The developed scaffolds were doped with sulfuric acid and mineralized in Simulated Body Fluid to mimic the inorganic phase of bone ECM. As expected, the doped PAN/PEDOT:PSS nanofibers exhibited electroconductive properties and were able to preserve their fibrous structure. The addition of PEDOT:PSS was found to improve the bioactivity of the scaffolds, with a more significant in vitro mineralization being obtained. By seeding the scaffolds with MG-63 osteoblasts and human mesenchymal stem/stromal cells, an increased cell proliferation was observed for the mineralized PAN/PEDOT:PSS nanofibers, which also registered an increased expression of key osteogenic markers (e.g Osteopontin). Our findings appear to corroborate the promising potential of the generated nanofibers for future ES-based BTE applications. Acknowledgements: The authors thank FCT for funding through the projects InSilico4OCReg (PTDC/EME-SIS/0838/2021), BioMaterARISES (EXPL/CTM-CTM/0995/2021) and OptiBioScaffold (PTDC/EME-SIS/32554/2017, POCI-01- 0145-FEDER- 32554), the PhD scholarship (2022.10572.BD) and through institutional funding to iBB (UIDB/04565/2020 and UIDP/04565/2020), Associate Laboratory i4HB (LA/P/0140/2020) and IT (UIDB/50008/2020)

Introduction. Human Mesenchymal stem cells (hMSCs) are a promising source for articular cartilage repair. Unfortunately, under in vitro conditions, chondrogenically differentiated hMSCs have the tendency to undergo hypertrophy similar to growth plate chondrocytes. Retinoic acid (RA) signalling plays a key role in growth plate hypertrophy. Whilst RA agonists block chondrogenesis and foster hypertrophy during later stages, RAR inverse agonists (IA) enhance chondrogenesis when applied early in culture. Therefore, we hypothesized that treatment with RAR IA will attenuate hypertrophy in chondrogenically differentiated hMSCs. To test this hypothesis, we analysed early (initial chondrogenic differentiation) and late treatment (hypertrophy stage) of hMSCs with an RAR IA. Methods. Pellets of passage 2 hMSCs were formed in V-bottom well plates by centrifugation and pre-differentiated in a chemically defined medium containing 10ng/mL TGFß (CM+) for 14 days. Thereafter, pellets were cultured for an additional 14 days under 6 conditions: CM+, CM- (w/out TGFß), and hypertrophic medium (CM- with 25 ng/ml BMP 4, w/out dexamethasone). Each of these first three conditions was additionally supplemented with the RA receptor (RAR) inverse agonist BMS493 (BMS) at 2μM after 14 days of chondrogenic pre-differentiation. One additional BMP4 group was supplemented with BMS from the beginning of chondrogenic differentiation until day 14. The pellets were assessed for gene expression (Col 2, Col 10, Col 1 and MMP13) and histologically using dimethyl methylene blue (DMMB), alkaline phosphatase staining (ALP) and collagen II and X immunohistochemistry. Results. Hypertrophy was reduced by addition of BMS at day 14 and further reduced by addition from the beginning. BMS treatment resulted in smaller cells under hypertrophic conditions, higher collagen II content in chondrogenic groups and reduction in collagen X production and ALP activity in every condition. Gene expression data for hypertrophic markers, collagen X and MMP13, were upregulated under the influence of BMP4 but a distinct downregulation in MMP13 expression was shown upon addition of BMS during the late stage differentiation and further reduced upon addition during early stage chondrogenesis. Furthermore, Collagen X expression was reduced by early BMS treatment. Discussion. The treatment with the RAR IA, BMS, attenuated hypertrophic changes in chondrogenically differentiated hMSCs as demonstrated by histology, immunohistochemistry and PCR. These findings suggest an additional approach to attenuate hypertrophy in chondrogenically differentiated hMSCs. Current studies are exploring the timing and dose of BMS to most efficaciously prevent hypertrophy