Introduction. Periprosthetic medial tibial plateau fractures (TPF) are rare but represent a serious complication in unicompartmental knee arthroplasty (UKA). Most common treatment of these fractures is osteosynthesis with canulated screws or plates. Aim. The aim of this study was to evaluate these two different treatment options of periprosthetic fractures. The hypothesis was that osteosynthetic treatment with plates show significantly higher maximum fracture loads than fixation with cannulated screws. Materials and Methods. 12 matched paired fresh frozen tibias with periprosthetic tibial plateau fractures were used for this study. In group A osteosyntheses with angle-stable plates were performed, whereas in group B cannulated screws were utilized to fixate the periprosthetic fractures. DEXA bone density measurement and standard X-rays (ap and lateral) were accomplished before loading the tibias under standardised conditions with a maximum load of up to 10.0kN. Results. In the plate group all tibias fractured with a median load of Fmax=2.64 (0.45–5.68) kN, whereas in the group with cannulated screws fractures occurred at a mean load of Fmax=1.50 (0.27–3.51) kN. The difference was statistically significant with p<0.05. Discussion. Angle-stable plates showed significantly higher fracture load resistance than fixation with cannulated screws. Therefore osteosynthesis with angle-stable plates in periprosthetic tibial plateau fractures should be recommended. MULTIPLE DISCLOSURES

Background and aim. Implant-associated osteomyelitis is one of the most feared complications following orthopedic surgery. Although the risk is low it is crucial to achieve adequate antibiotic concentrations proximate to the implant for a sufficient amount of time to protect the implant surface and ensure tissue integration. The aim of this study was to assess steady-state piperacillin concentrations in the proximity of an orthopedic implant inserted in cancellous bone. Method. Six female pigs received an intravenous bolus infusion of 4 g/0.5 g piperacillin/tazobactam over 30 min every 6 h. Steady state was assumed achieved in the third dosing interval (12–18 h). Microdialysis catheters were placed in a cannulated screw in the proximal tibial cancellous bone, in cancellous bone next to the screw, and in cancellous bone on the contralateral tibia. Dialysates were collected from time 12 to 18 h and plasma samples were collected as reference. Results. Time above the minimal inhibitory concentration (fT>MIC) was evaluated for MIC of 8 (low target) and 16 μg/mL (high target). For the low piperacillin target (8 μg/mL), comparable mean fT>MIC across all the investigated compartments (mean range: 54–74%) was found. For the high target (16 μg/mL), fT>MIC was shorter inside the cannulated screw (mean: 16%) than in the cancellous bone next to the screw and plasma (mean range: 49–54%), and similar between the two cancellous bone compartments. Conclusions. To reach more aggressive piperacillin fT>MIC targets in relation to the implant, alternative dosing regimens such as continuous infusion may be considered

For the management of displaced patellar fractures, surgical fixation using cannulated screws along with anterior tension band wiring is getting popular. Clinical and biomechanical studies have reported that using cannulated screws and a wire instead of the modified tension band with Kirschner wires improves the stability of fractured patellae. However, the biomechanical effect of screw proximity on the fixed construction remains unclear. The aim of this study was to evaluate the mechanical behaviors of the fractured patella fixed with two cannulated screws and tension band at different depths of the patella using finite element method. A patella model with simple transverse fracture [AO 34-C1] was developed; the surgical fixation consisted of two 4.0-mm parallel partial-threaded cannulated screws with a figure-of-eight anterior tension band wiring using a 1.25-mm stainless steel cable. Two different locations, including the screws 5-mm and 10-mm away from the leading edge of the patella, were used. A tension force of 850 N was applied on the patellar apexes at two loading angles (45° and 0° [parallel] to the long axis) to simulate different loading conditions while knee ambulation. The proximal side (base) of the patella was fixed, and the inferior articular surface was defined as a compression-only support in ANSYS to simulate the support from distal femur condyles. Compression-only support enables the articular surfaces of the present patella to only bear compression and no tension forces. Under different loading conditions, the fixed fractured patella yielded higher stability during 0° loading of tension force than during 45° loading. When the screws were parallel placed at the depth of 5 mm away from the patellar surface, the deformation of patellar fragment and maximum gap opening at the fracture site were smaller than those obtained by screws placed at the depth of 10 mm away from the patellar surface. Compared to the superficial screw placement, the deeper placement (10 mm) increased the maximum gap opening at the fracture site by 1.56 times under 45° loading, and 1.58 times under 0° loading. The load on the tension band wire of the 10-mm screw placement was 3.12 times (from 230 to 717 N) higher than that of the 5-mm placement. Under the wire, the contact pressure on the patellar surface was higher with the 10-mm screw placement than the 5-mm screw placement. The peak bone contact pressures with the 10-mm placement were 7.7 times (99.5 to 764 MPa) higher. This is the first numerical study to examine the biomechanical effects of different screw locations on the fixation of a fractured patella using screws and tension band. Based on a higher stability and lower cable tension obtained by the superficial screws placement, the authors recommended the superficial screw placement (5 mm below the leading edge of the patella) rather than the deep screws while fixing the transverse patellar fracture with cannulated screws and cable

Gunshot-induced fractures of the proximal femur typically present with severe comminution and bone loss. These fractures may also be associated with local damage to soft tissue, neurovascular structures and injuries to abdominal organs. The aim was to evaluate the outcomes of civilian gunshot injuries to the proximal femur at a major trauma center in South Africa. A retrospective review of all patients who sustained gunshot-induced proximal femur fractures between January 2014 and December 2017 was performed. Patients with gunshot injuries involving the hip joint, neck of femur or pertrochanteric fractures were included. Patient demographics, clinical- treatment and outcome data were collected. Results are reported as appropriate given the distribution of continuous data or as frequencies and counts. Our study included 78 patients who sustained 79 gunshot-induced proximal femur fractures. The mean age of patients was 31 ± 112, and the majority of patients were male (93.6%). Pertrochantenteric fractures were the most common injuries encountered (73.4%). Treatment included cephalomedullary nail (60.8%), arthrotomy and internal fixation (16.4%) and interfragmentary fixation with cannulated screws (6%). One case of complete neck of femur fracture had fixation failure, which required conversion to total hip arthroplasty. The overall union rate was 69.6%, and 6.3% of patients developed a fracture-related infection in cases who completed follow-up. The study shows an acceptable union rate when managing these fractures and a low risk of infection. As challenging as they are, individual approaches for each fracture and managing each fracture according to their merits yield acceptable outcomes

Fibular head avulsion fractures represent a significant injury to the posterolateral corner of the knee. There is a high rate of concomitant injuries including rupture of the cruciate ligaments. Surgical fixation is indicated to restore stability, protect repaired or reconstructed cruciate ligaments and possibly decrease the likelihood of degenerative change. The current presentation describes a novel technique which provides secure fixation to the fibular head, restoring integrity of the posterolateral ligament complex and facilitating early motion. We also present a case series of our experience by a single surgeon at our tertiary referral center. Twenty patients underwent open reduction and internal fixation between 2006 and 2016 using a large fragment cannulated screw and soft tissue washer inserted obliquely from the proximal fibula to tibia. Fixation was augmented with suture repair of the lateral collateral ligament and biceps tendon. The orientation of the fracture was assessed based on preoperative imaging. Repair / reconstruction of concomitant injuries was performed during the same procedure. Early range of motion was initiated at 2 weeks postoperatively under physical therapy guidance. All patients returned for clinical and radiographic assessment (average 3.5 years). All fractures went on to bony union. There were no reoperations for recurrent instability. All patients regained functional range of motion with mean extension of 0.94 degrees and mean flexion of 121.4 degrees. Two patients underwent hardware removal. One patient developed a late local infection, which occurred greater than 5 years after surgery. Eleven patients underwent postoperative varus stress radiographs which demonstrated less than 1 mm difference between the operated and contralateral side. Fracture morphology typically demonstrated an oblique pattern in the coronal plane and a transverse pattern in the sagittal plane. This study represents a novel surgical technique for the repair of fibular head avulsion fractures with a large fragment cannulated screw placed obliquely from the fibula to tibia. Fixation is augmented with a soft tissue washer and suture repair. Our results suggest that this technique allows for early range of motion with maintenance of reduction, high rates of union, and excellent postoperative stability

Sacral fractures are often underdiagnosed, but are frequent in the setting of pelvic ring injuries. They are mostly caused by high velocity injuries or they can be pathological in aetiology. We sought to assess the clinical outcomes of the surgically treated unstable sacral fractures, with or without neurological deficits. unstable sacral fractures were included in the study. Single centre, prospectively collected data, retrospective review of patients who sustained vertically unstable fractures of the sacrum who underwent surgical fixation. out of a total of 432 patients with pelvis and acetabulum injuries. fifty six patients met the inclusion criteria. 18 patients had sustained zone one injuries. 14 patients had zone 2 injuries and 10 patients had zone 3 injurie. Operative fixation was performed percutaneously using cannulated screws in 18 patients.. Open fixation of the sacrum using the anterior approach in 6 patients. Posterior approach was indicates in all 10 of the zone 3 injuries of the sacrum. While in 4 patients, combined approaches were used. 3 patients had decompression and spinopelvic fixation. Neurological deficits were present in 16% of the patients. 2 patients presented with neurgenic bladder. Of the 4 patients who had neurological fall out, 3 resolved with posterior decompression and posterior fixation. All 4 neurological deficits were due to taction or compression of the nerve roots. No hardware failures or non unions observed. The rate of neurological deficit was related more to the degree of pelvic ring instability than to a particular fracture pattern. Low rates of complications and successful surgical treatment of sacral fractures is achiavable. Timeous accurate diagnosis mandatory

Purpose of Study:. In situ fixation with cannulated screws, is the most common surgical management of Slipped Capital Femoral Epiphysis. Surgeons are wary of the consequences to the epiphysis with any manipulation of the hip. The purpose of this study, was to evaluate the use of a single cannulated screw, inserted with imaging done in the standard AP position, and gentle positioning for a frog lateral X-ray, and the risk of slip progression. Description:. A retrospective radiological review was done on 18 patients between the ages of 9–14 treated for unstable slips from 2006–2014. All patients were treated with a single partially threaded, cannulated screw inserted from the anterior aspect of the neck perpendicular to the epiphysis. Intraoperative imaging included an AP image, and thereafter the hip was gently abducted and externally rotated for a frog lateral view. Radiological comparison of the preoperative, postoperative and subsequent follow up X-rays was done. Follow up ranged from 6 months to 8 years. Results:. Radiographs showed no significant slip progression post op. Conclusion:. Gentle positioning for a frog lateral image during screw placement, and a single screw technique appears to be a safe in the management of unstable slips in Slipped Capital Femoral Epiphysis

Introduction. Fracture of the proximal femur frequently occur in children with osteogenesis imperfecta(O.I.) or fibrous dysplasia and may lead to progressive coxa vara and a “shepherds crook” deformity. In adults, these changes introduce difficulties that are not ordinarily encountered with routine osteosynthesis. There is minimal literature on this topic and the cases reported are few in number. Objective. The purpose of this case report was to describe a intertrochanteric fracture in a elderly woman with O.I. successfully treated by 115 degrees hip osteotomy plate and cannulated screws. Methods. We present a case of a 82-year-old female who was injured by falling. She had O.I. type â�£ A according to Sillence. Radiographs showed a intertrochanteric fracture of the femur with severe deformity. The femoral shaft had 25 degrees angular deformity and moderate rotation at the proximal. The angle between femoral neck and shaft was 105 degrees (severe coxa vara) and the proximal femur had a “shepherds crook” deformity (See Figure 1). She had presented 70 years previously ipsilateral fractures of the femur which had healed. These mal-united fracture involved anatomical changes such as medicalization of the femoral canal and intramedullary remodeling and sclerosis (See Figure 2). Recognizing the anatomical changes before and during surgery, standard dynamic hip screw or AO angled blade plate could not fit the femur and not provide stability. Using 115 degrees hip osteotomy plate and cannulated screws, osteosynthesis was performed (See Figure 3). Results. Twelve months postoperatively, the fracture united without complications and the patient felt comfortable and satisfied with gait. Conclusion. An unusual case was presented in which a 82-year-old woman was successfully treated with 115 degrees hip osteotomy plate and cannulated screws for a intertrochanteric fracture of the femur with osteogenesis imperfecta. Standard plate osteosynthesis was unlikely to provide sufficient stable fixation in this case

The consequences of the complications associated with the management of slipped upper femoral epiphysis are a major source of disability in young adults. Whilst the management of chondrolysis, avascular necrosis or malunion of the femoral neck is usually undertaken by paediatric orthopaedic surgeons the initial management of SUFE in many regions is as part of an adult trauma service. This retrospective audit assessed the outcome of the management of SUFE in one such health region in which treatment occurred at three sites by a number of surgeons of varying experience, during the period July 1994 to June 2004. The aim was to compare our outcomes with those published and to identify whether our service should be altered as a consequence. The case notes and x-rays as recorded in theatre records were retrieved. Of the 64 cases that were treated during this period adequate records for 60 patients were available. Of these 60 patients there were 7 bilateral cases. Fixation in all 67 cases was by a single cannulated screw. In the 53 unilateral cases 17 underwent prophylactic pinning, the remaining 36 remained under observation. Of these nine patients presented with subsequent slips, eight of which were unstable and two had slip angles greater than 60° in which one developed avascular necrosis. Four other cases of avascular necrosis were observed (incidence 6%). Chondrolysis occurred in one patient with persistent pin penetration. In the remaining 73 cannulated screws used for stabilisation and 17 for prophylactic fixation no complications were observed. The complication rates observed in this series are within those accepted in the literature. The high incidence of subsequent slips and the attendant severity of these when compared with the relative safety of contemporary cannulated screw fixation has led us to recommend prophylactic pinning in our region

Tibiotalocalcaneal arthrodeisis is performed for a variety of conditions, including advanced osteoarthritis, Charcot arthropathy, rheumatoid arthritis, post-traumatic arthrosis and foot deformities such as fixed equinovarus. There have been few published studies showing the results of such a procedure for limb salvage. Over a period of 11 years between 1996 and 2007, 18 patients underwent calcaneotalotibial arthrodeisis using either cannulated screws or a retrograde intramedullary locking nail. Post-operative rehabilitation regimes were standardised. VAS, AOFAS ankle-hindfoot, SF-36 and patient satisfaction scores were obtained and analysed. Eighteen patients (10 male and 8 female) with 19 ankles underwent tibiotalocalcaneal arthrodeisis at an average age of 52.3 (31.4 to 70.2 years). Seven patients had cavovarus deformity, six had osteoarthritis, three had Charcot's joint, two had failed previous fusions and one patient had a footdrop post-T12 tumour resection. Twelve right and seven left fusions were performed, with six cannulated screws and 13 retrograde nails. The mean time to complete fusion was 5.89 (3 to 11) months in 18 ankles (94.7%). There was one pseudoarthrosis (5.3%). Patients were followed up for an average of 35.6 (11 to 144) months. Four wound infections (21%) occurred post-operatively. Two patients died from unrelated caused whilst on follow-up. Thriteen patients returned for follow-up scoring. VAS scores improved from 7.85 to 2.54 (p=0.00). AOFAS ankle-hindfoot scores improved from 30.50 to 63.62 (p=0.00). SF-36 scores also improved in several parameters. Physical function improved from 40.38 to 66.15 (p=0.02); physical role improved from 15.38 to 53.85 (p=0.03); Bodily pain improved from 36.69 to 62.23 (p=0.00); emotional role improved from 69.23 to 100 (p=0.04); and mental health improved from 62.77 to 0.15 (p=0.04). Eleven patients (84.6%) reported good to excellent satisfaction and expectation scores. Hindfoot arthrodesis, via retrograde imtramedullary nailing or cannulated screw insertion, are effective techniques for treating complex foot deformities and often is the only alternative to amputation. Although a demanding procedure with high potential complications, they provide effective relief from pain, improves the quality of life, and has high patient satisfaction

Subcapital fractures about the hip continue to be a common clinical scenario with which we all face. There are estimated to be over 350,000 hip fractures annually in the U.S. with 40% being displaced femoral neck fractures. The mean cost is over $30,000. Optimizing surgical care is essential with the overall goal being to perform the most effective treatment with the lowest risk of reoperation that provides the best postoperative function and pain relief. In the “young” (which is often defined as whatever age is younger than you!) reduction and internal fixation is often the most effective retaining the native femoral head. The risk of non-union and AVN is often less than potential complications that can follow an arthroplasty with 40% of displaced fractures treated with ORIF eventually requiring reoperation. Essentially for every 100 patients that undergo ORIF for displaced femoral neck fracture, choosing arthroplasty instead results in 17 conversions avoided. In the “elderly” in general we treat all displaced fractures with a total hip replacement which reduced re-admissions and is more cost effective for displaced femoral neck fractures. Aside from the medical morbidity following an arthroplasty dislocation is the primary concern. We have found the anterolateral approach reduces this significantly. Non-displaced fractures that are valgus impacted and biomechanically stable are treated with cannulated screws. Perhaps it can be argued that a hemiarthroplasty (bipolar or monopolar) has a lower risk of dislocation compared to a total hip replacement if performed by a surgical team with less frequent total hip replacement experience. However, total hip replacement results in less pain and better function when the patients are independent with intact mental status (patient not the surgeon…!). My algorithm is non-displaced valgus impacted or “stable” fractures undergo cannulated screws and the displaced fractures receive a total hip arthroplasty via an anterolateral approach

Purpose of Study. Bicondylar tibial plateau fractures are serious injuries to a major weight bearing joint. These injuries are often associated with severe soft tissue injuries that complicate the surgical management. This retrospective study evaluates the management of these high-energy injuries with the use of limited open reduction and fine wire circular external fixation. Methods. Between July 2008 and June 2012, 54 consecutive patients (19 females and 35 males) with high-energy tibial plateau fractures were treated at our tertiary level government hospital. All patients were treated with limited open reduction, and cannulated screw fixation combined with fine wire circular external fixators as the definitive management. The records of these patients were reviewed. Results. Forty-six patients met the inclusion and exclusion criteria. Thirty-six patients had Schatzker type-VI and ten patients had Schatzker type-V fractures. All fractures united without loss of operative reduction. No wound complications, osteomyelitis or septic arthritis occurred. Average Knee Society Clinical Rating Score was 81.6, translating to good clinical results. Minor pin tract infection was the most common complication encountered. Conclusion. Fine wire circular external fixation combined with limited open reduction and cannulated screw fixation consistently produced good functional results without serious complications. NO DISCLOSURES

The aim of this retrospective study was to evaluate the failure rate among different fixation devices for undisplaced fracture neck of femur. All 52 patients with Garden I and II hip fractures who underwent surgery in a teaching hospital in London from January 2007 to June 2012 were included. Electronic patient records were accessed to collect the patient data. There were 52% females and the mean age of patients was 70 years. Thirty patients had cannulated screws, 18 – dynamic hip screw (DHS) with de-rotation screw and 4 had DHS alone. Initial results showed that 36% patients had re-operation. 7(77%) had total hip replacement and 1(11%) had metal work removal. The reason for revision was failure of fixation in 8 (88%) and avascular necrosis in 1 (11%). There was significantly higher failure rate in the DHS with derotation screw group (50%) compared to the cannulated screw group (35%) and the DHS alone group (0%). Average time to planned revision was 11.1 months. Traditionally undisplaced intra capsular hip fractures are treated by in-situ fixation using different devices. Biomechanically DHS with de-rotation screw achieves better rotational and axial stability compared to other fixation devices. However, our study showed a higher failure rate in this group. Inability to achieve a perfectly parallel screw position seems to be a significant factor responsible for high failure. Higher failure rates with fixation may boost the role of replacement arthroplasty as one off surgical treatment in elderly patients

Post-traumatic avascular necrosis of the femoral head usually occurs after hip dislocation and femoral neck fracture. Recently along the development of hip arthroscopy, early stage of avascular necrosis of the femoral head can be treated rthroscopically. We hereby present two cases of post-traumatic avascular necrosis patients treated with hip arthroscopy. Case 1. Twenty one year old female patient came to the hospital because of fall from height of 3 floors. Left acetabular fracture, both superior pubic rami fractures and severely displaced left femoral neck fracture were identified at the emergency department (Fig. 1-A). She underwent surgery at the injury day. After the repair of ruptured urinary bladder, internal fixation of the femoral neck was done. Four cannulated screws with washers were inserted for displaced femoral neck fracture, consistent with garden stage IV (Fig. 1-B). Skeletal traction of ipsilateral lower extremity was applied four weeks after the surgery for acetabular fracture. She visited us for painful limitation of motion on left hip at eight months postoperatively. Plain radiograph showed collapse of femoral head and osteophyte formation which were caused by post-traumatic avascular necrosis (Fig. 1-C,D). Femoral head was perforated by a screw. She was planned to remove the screw and resect the osteophyte arthroscopically. On arthroscopic examination, severe synovitis and folded, collapsed femoral cartilage were identified (Fig. 1-E). Screws were removed and osteophyte were also resected (Fig. 1-F). We filled the cavity caused by the screws with allogenic strut graft for structural support. After the surgery, pain was relieved and she came back to her active daily living and for six months, no other complication nor further collapse were identified postoperatively. Case 2. Fourty year old male patient was admitted to the hospital for fall from height about fifteen feet from the ground. Left femoral neck fracture was identified on the emergency department. Previously he had underwent intramedullary nailing for the femoral shaft fracture about five years ago. Urgent internal fixation with four cannulated screws was done on the day of injury. The fixation was unsatisfactory because previously inserted intramedullary nail hindered the proper trajectory of screws. Furthermore, direction of cephalad interlocking holes of the nail were not consistent with the anteversion of femoral neck, we could not place the screws through the nail. Four months after the index surgery, collapse of femoral head and loosening of screws have occurred. MRI showed the collapse of femoral head and posttraumatic avascular necrosis. Prominent bony beak of femoral neck were identified and he complained difficulty and pain on his hip during abduction. We left two screws for secure fixation and resected the bony beak using arthroscopic burr. After the surgery, he felt free from the pain on abduction of hip. Discussion. Even though collapse of the femoral head is identified, early intervention by the arthroscopy could minimize pain or delay the progression of arthritic change. Authors think that it might be helpful for the young adult patients in terms of pain relief and potential delay of the total hip arthroplasty

Internal fixation is currently the standard of care for Garden I and II femoral neck fractures in the elderly. However, there may be a degree of posterior tilt on the preoperative lateral radiograph above which failure is likely, and primary arthroplasty would be preferred. The purpose of this study was to determine the association between posterior tilt and the risk of subsequent arthroplasty following internal fixation of Garden I and II femoral neck fractures in the elderly. This study represents a secondary analysis of data collected in the FAITH trial, an international multicenter randomized controlled trial comparing the sliding hip screw to cannulated screws in the management of femoral neck fractures in patients aged 50 years or older. For each patient who sustained a Garden I or II femoral neck fracture and had an adequate preoperative lateral radiograph, the amount of posterior tilt was categorized as < 2 0 degrees or ≥20 degrees. Multivariable Cox proportional hazards analysis was used to assess the association between posterior tilt and subsequent arthroplasty during the two-year follow-up period, while controlling for potential confounders. Of the 555 patients in the study sample, posterior tilt was classified as ≥20 degrees for 67 (12.1%) and < 2 0 degrees for 488 (87.9%). Overall, 13.2% (73/555) of patients underwent subsequent arthroplasty in the 24-month follow-up period. In the multivariable analysis, patients with posterior tilt ≥20 degrees had a significantly increased risk of subsequent arthroplasty compared to those with posterior tilt < 2 0 degrees (22.4% (15/67) vs 11.9% (58/488), Hazard Ratio (HR) 2.22, 95% confidence interval (CI) 1.24–4, p=0.008). The other factor associated with subsequent arthroplasty was age ≥80 (p=0.03). In this study of patients with Garden I and II femoral neck fractures, posterior tilt ≥20 degrees was associated with a significantly increased risk of subsequent arthroplasty. Primary arthroplasty should be considered for Garden I and II femoral neck fractures with posterior tilt ≥20 degrees, especially among older patients

First Metatarsophalangeal joint fusion has been successfully used to treat Hallux rigidus. We have attempted to evaluate commonly used methods of fixation and joint preparation. To the best of our knowledge, this is the single largest comparative study on first MTPJ fusion. We aimed to evaluate the radiological union and revision rates. We included 409 consecutive MTPJ fusions performed in 385 patients. We collected demographic, comorbidities and complication data. We evaluated the radiographs for the status of the union. Logistic regression was used to calculate the Odds ratio (OR) of non-union for the collected variables. Our union rate was 91.4% (34/409). 29.4% of our non-unions were symptomatic (10/34). Hallux valgus showed a statistically significant relation to non-union (Odds ratio 9.33, p-value 0.017). Other potential contributing factors like sex (OR1.9, p-value 0.44), diabetes (OR 0, p-value 0.99), steroid use (OR 2.07, p-value 0.44), inflammatory arthritis (OR 0, p-value 0.99) and smoking (OR 2.69, p-value 0.34) did not attain statistical significance. Further, the methods of fixation like solid screws (OR 0, p-value 0.99), plate (OR 3.6, p-value 0.187) or cannulated screws (OR 0.09, p-value 0.06) showed no correlation with non-union. We compared two techniques of joint preparation and found no significant difference in union rates (Chi-Square 1.0426, p-value 0.30). Our crude cost comparison showed the average saving to the trust per year could be 33,442.50£ by choosing screws over plate. Only Hallux Valgus had a statistically significant relation to non-union. Solid screw could be economically the most viable option and a valid alternative

Introduction. Management of the sequelae of arthritis of the hip joint has changed over time. Total joint replacement has gained popularity due to retained mobility and stability. In the high demand paediatric and adolescent population problems are encountered with longevity of the procedure. Hip arthrodesis is a useful alternative procedure that sacrifices mobility of the joint to achieve pain relief and restores function. Several surgical techniques have been described to achieve hip fusion. We describe a technique that achieves concentric bone surfaces with hip resurfacing reamers. Maximum bone is preserved to maintain leg length. Trans-articular compression is achieved with cannulated screw fixation. Subtrochanteric de-functioning osteotomy completes the procedure to protect the fusion site and control the position of the limb. Our optimal position of fusion was 30 degrees of flexion, neutral to 5 degrees of abduction and neutral to 10 degrees of external rotation. Methods. Fourteen patients (8 female) treated by hip arthrodesis over a two-year period are reviewed in terms of clinical and radiological outcome in the short term. Their mean age at hip fusion was 11 years (6–18). The etiology included TB (6 cases), staphylococcal infection (2), non-specific arthritis (3), Perthe's (1), chondrolysis (1) and avascular necrosis following trauma (1). Results. Fusion was achieved in 12/14 patients. All patients in whom fusion was achieved had relief of pain and returned to their normal activities. Conclusion. We believe hip arthrodesis performed in the correct patient is a good procedure to preserve function and relieve pain. The procedure is technically demanding and careful follow-up to ensure optimal positioning and solid fusion is essential to ensure good results. NO DISCLOSURES

Over the past decade there has been a shift in the approach to management of many femoral neck fractures. As noted by Miller et al. those trends are reflected in the practice patterns of surgeons applying for board certification through the American Board of Orthopaedic Surgeons. From 1999 to 2011 there was a trend toward total hip arthroplasty and corresponding small decreases in the use of hemi-arthroplasty and internal fixation for treatment of femoral neck fractures. For many years the treatment approach has been a simple diagnosis-related algorithm predicated upon classification of the fracture as displaced (historically treated with hemi-arthroplasty) or non-displaced (historically treated with internal fixation). More recently, however, the focus has shifted to a patient-centered approach. In the patient-centered approach factors such as age, functional demands, pre-existent hip disease and bone quality should all be considered. In the contemporary setting it is still important to distinguish between displaced and non-displaced fracture patterns. Non-displaced femoral neck fractures, regardless of patient age or activity, are well-suited to closed reduction and internal fixation, most commonly with three cannulated screws. The union rate is high in non-displaced fractures treated with internal fixation and the benefits of preserving the native hip joint are substantial. Displaced femoral neck fractures in younger active patients, particularly those without pre-existent hip arthritis, are best treated with early anatomic reduction and internal fixation. While a subgroup of young, active patients who undergo ORIF may fail, the benefits of native hip preservation in that group are again substantial. Displaced femoral neck fractures in older patients or those with substantial pre-existing hip arthritis are best treated with arthroplasty. The biggest practice change has been the trend to total hip arthroplasty as opposed to hemi-arthroplasty for a subgroup of patients. Total hip arthroplasty is now favored in almost all active, cognitively well-functioning patients as the degree of pain relief is better and the risk of reoperation is lower in the current era (32mm and 36mm femoral heads). Hemi-arthroplasty, either uni-polar or bi-polar, remains an appropriate treatment for cognitively impaired patients who also have limited functional demands in whom the risk of dislocation is particularly high

Cannulated screw is commonly used in the fixation of proximal femoral neck fractures. In the literature, several configurations had been proposed for best mechanical support with clinical experiences or biomechanical tests. Although screws in triangle configuration contribute certain fixation stability, but sometimes the surgeons made their own choices have to conduct another fixation pattern for some factors such as fracture type, economic issues, and so on. Therefore the aim of this study is to analyze the mechanical responses of a fractured femur fixed with screws in different configurations, screw materials and screw diameters with finite element method, trying to find the most stable construct. A solid femur model was built from the CT images of a standard saw bone. Three fracture types of the femoral neck were created according to Pauwel's classification (30?, 50?, 70?) by CAD software. The models of implanted screws were built according to a commercial cannulated screw (Stryker Osteosynthesis, Schoenkirchen/Kiel, Germany) with diameter 6.5mm and 4.5mm by CAD software, too. Three fixation configurations were analyzed in this study, including triangle with superior single screw with titanium diameter 6.5mm, triangle with inferior single screw with diameter 6.5mm and diamond with four stainless screw diameter 4.5mm (fig.1). Totally there were nine models constructed in this study, and all of them were then imported into ANSYS WORKBENCH v14 (Swanson Analysis, Houston, PA, USA) to mesh and further analysis. 700N vertical downward force was applied on the femur head and the distal end of femur shaft was totally fixed. The triangle fixation with superior single screw resulted in a best stability, but the fracture fixed with screws in a diamond configuration has least fracture gap. The difference of the maximum displacement of the femur head with Pauwel's classification 70?between triangle fixation with superior single screw and diamond configuration is only 0.03mm (1.72–1.69 mm). In most unstable femoral neck fracture [Pauwel's classification 70], the maximum gap distance is 0.59mm under the diamond configuration, while it is 0.63mm as the fracture fixed with a triangle configuration. Therefore, this study suggests that four 4.5mm stainless screws in a diamond configuration is an alternative for proximal femur fracture once 6.5mm titanium screws are not available

Background. Despite studies into patient consent and their understanding of the potential risks of trauma surgery, no study has looked at the patient's understanding of the procedure involved with neck of femur fracture surgery. Method. Prospective analysis of 150 patients who had operative fixation of neck of femur fractures in a district general hospital. Patients were asked on the third post-operative day to select which procedure they had undergone from a diagram of four different neck of femur surgeries (cannulated screws, cephalomedullary nail, dynamic hip screw and hemiarthroplasty). Exclusion criteria for patient selection - mini mental score of < 20 and confusion secondary to delirium. Results. All patients had signed consent form 1 which was matched to the procedure. All patients were consented by an FP2, CT1 or other SHO. The mean age of patients was 83years. 5% had cannulated screw fixation, 45% had a hemiarthroplasty, 42% had a dynamic hip screw and 8% had a cephalomedullary nail. 47% of patients could correctly identify the procedure they had undergone on the 3. rd. post-operative day. Conclusions. This study shows that there are questions about the effectiveness of informed consent and patient understanding of the procedure before and after hip fracture surgery. We suggest that further detailed studies may highlight the need for alternative ways of communicating procedures to the patients or that more specialised training is required for those explaining hip fracture surgery to patients. Improvements in these areas might help ensure the true informed consent required