The main causes of total hip arthroplasty (THA) revisions are loosening and instability. Use of a dual mobility cup cemented in a acetabular reconstruction cage device limits the risk of instability and does not hinder the acetabular fixation during
In most cases of revision acetabular total hip arthoplasty (THA), some degree of bone loss will be accompanied. If the bone loss is massive, the management of bone defect is more challenging problem. We consider that using cementless accetabular cup for revision acetabular reconstruction is good indication when stable interface fit between the acetabular cup and bone is achieved. The purpose of this study is to review the result of revision hip arthroplasty using cementless acetabular cup with and without bone graft. Between 1998 and 2012, 65 revisions using cementless acetabular cup (Mallory-Head 4 Finned component) were performed in 64 patients, whose mean age was 64.9 years. The cases of revision are aseptic loosening (53 joints), and infection (12 joints). All patients were followed up for a minimum period of 24.0 months (mean, 84 months) and were divided into two groups as follows: in group A, revisions without bone graft (28 joints); in group B, revisions with bone graft (37 joints). We compared clinical and radiographical results of group A with group B.Introduction
Materials and methods
Total hip arthroplasty (THA) is a common and extremely beneficial procedure that is being performed more often as the population ages. Current THA follow-up guidelines require large amounts of resources and may not justify their cost with increased patient outcomes. Most problems that would require
Aim. Periprosthetic joint infection (PJI) is a devastating complication in revision total hip arthroplasty (THA). As preoperative diagnosis can be difficult, some patients who undergo planned aseptic revision surgery might have positive intraoperative cultures and later be classified as infected. In this retrospective study we analyzed the influence of intraoperative positive cultures and possible underlying risk factors in patients undergoing planned aseptic
INTRODUCTION. In the United States, the Centers for Medicare and Medicaid Services consider rates of unplanned hospital readmissions to be indicators of provider quality. Understanding the common reasons for readmission following total joint arthroplasty will allow for improved standards of care and better outcomes for patients. The current study seeks to evaluate the rates, reasons, and Medicare costs for readmission after total hip and total knee arthroplasty. METHODS. This study used the Limited Data Set (LDS) from the Centers for Medicare and Medicaid Services (CMS) to identify all primary, elective Total Knee Arthroplasties (TKA) and Total Hip Arthroplasties (THA) performed from January 2013 through June 2016. The data were limited to Diagnosis-Related Group (DRG) 470, which is comprised of major joint replacements without major complications or comorbidities. Readmissions were classified by corresponding DRG. Readmission rates, causes, and associated Medicare Part A payments were aggregated over a ninety-day post-discharge period for 804,448 TKA and 409,844 THA. RESULTS. There were 31,172 readmissions in the ninety days following THA, for a readmission rate of 7.6%. There were 51,768 readmissions following TKA, for a readmission rate of 6.4%. The leading causes of readmission post-THA were revision of hip or knee replacement (17.66%); septicemia (4.76%); and postoperative infections (3.74%). The most common reasons for readmission post-TKA were postoperative infections (6.42%); septicemia (4.84%); and esophagitis (3.85%). In contrast to
Purpose:. Acetabular bone loss during revision total hip arthroplasty (THA) poses a challenge for reconstruction as segmental and extensive cavitary defects require structural support to achieve prosthesis stability. Trabecular metal (TM) acetabular augments structurally support hemispherical cups. Positive short-term results have been encouraging, but mid- to long-term results are largely unknown. The purpose of this study was to determine the continued efficacy of TM augments in
Background. Tranexamic acid (TXA) is a lysine analog that has been shown to reduce intra-operative blood loss in total joint replacements. Effect of TXA in morbid obese patients has not been established. The aim of this study was to evaluate the effect of TXA on change of haematocrit (HCT) and packed RBC (PRBC) blood transfusion rate in our institution, especially in morbid obese patients. Methods. Between January 2014 and December 2014, 216 primary and revision hip and knee arthroplasty were identified from our prospective institutional database. All cases were performed by two adult reconstruction specialists. All primary total hip arthroplasties (THA) were non-cemented and all primary total knee arthroplasties (TKA) were cemented with similar implant and technique. Use of TXA in our institution was initiated on August of 2014. TXA was given intravenously (IV) as one gram prior to incision and one gram at the time of femoral preparation in THA or cementation in TKA, not exceeding 10mg/kg. In cases where IV TXA was contraindicated, topical was used. We analyzed pre- and post-operative hematocrit and transfusion rate. Criteria for transfusion was HCT < 25 or Hb < 9. 72 patients (33%) were considered morbid obese with body mass index (BMI) ≥ 35. Results. In the non-TXA group, 50 out of 126 cases (40%) were transfused (17 THA, 25 TKA, 5
Infected total hip arthroplasty (THA) is catastrophic, but it is treatable with a high degree of success. Two-stage revision with an antibiotic-loaded cement spacer is the most widely accepted method of treatment, and considered by some to be the best method; however, single-stage treatment currently is used widely, and is gaining acceptance. Although antibiotic-loaded cement is considered to be important for antibiotic delivery after surgery, cementless revision is equally successful with one- or two-stage procedures. Delivery of antibiotics with depot methods, such as cement or bone graft impregnated with antibiotics, is considered to be effective, but the antibiotic levels rapidly deteriorate after the first three days, leaving the cement itself vulnerable to colonization by resistant organisms. Nephrotoxicity is not common, but it does occur, and necessitates removal of the cement. This can be catastrophic if the implants are fixed with antibiotic-impregnated cement. Success rates of
Introduction. The purpose of this study was to introduce our perioperative prophylaxis method for infection and clarify surgical site infection rate in our patients performed total hip arthroplasty (THA). Method. Two hundred and eighty four
Long-term prospective RCT comparing hemiarthroplasty (HEMI) and total hip arthroplasty (THA) for the treatment of intracapsular neck of femur fracture. 81 previously mobile, independent, orientated patients were randomised to receive THA or HEMI after sustaining a displaced neck of femur fracture. Patients were followed up with radiographs, Oxford hip score (OHS), SF-36 scores and their walking distance. At a mean follow up of 8.7 years, overall mortality following THA was 32.5% compared to 51.2% following HEMI (p=0.09). Following THA, patients died after a mean of 63.6 months compared to 45 months following HEMI (p=0.093). Patients with THA walked further and had better physical function. No HEMIs dislocated but three (7.5%) THAs did. Four (9.8%) HEMI patients were revised to THA, but only one (2.5%)
Aim. Aseptic loosening is the leading cause of revision of total hip arthroplasty (THA). It is well recognized that an occult infection is the underlying cause of some aseptic revisions. Intraoperative cultures are central to the diagnosis of prosthetic joint infection (PJI). However, the diagnostic and prognostic value of unexpected positive intraoperative cultures remains unclear. The aim was to study whether first-time aseptic revision of a total hip arthroplasty with unexpected bacterial growth in cultures of intraoperatively taken biopsies have an increased risk of secondary revision due to all causes and increased risk of PJI revision, specifically. Method. Cases reported as first-time aseptic loosening revisions to the Danish Hip Arthroplasty Register (DHR) performed during January 1. st. , 2010, to May 15. th. , 2016, were included. DHR data were merged with the Danish Microbiology Database, which contains data from all intraoperatively obtained cultures in Denmark. Included first-time revisions were grouped based on the number of positive cultures growing the same bacteria genus: ≥2, 1 and 0 cultures. Revisions were followed until secondary revision, death, or end of follow-up period after one year. Relative risk for secondary revision due to all causes and PJI was estimated. Results. We included 2,305 first-time aseptic revisions. Unexpected growth was found in 282 (12%) of which 170 (60%) cases showed growth of the same bacteria in only one culture. Coagulase-negative staphylococcus accounted for 121 (71%). Secondary revision was performed in 163 (7%) cases, with PJI being the indication for revision in 43 (26%) cases. The relative risk of secondary revision was significantly higher for cases of one positive culture growing the same bacteria compared to culture negative cases, both for revision due to all causes; 1.73 (95%CI 1.07; 2.80) and PJI exclusively; 2.63 (1.16; 5.96). Cases of 2 or more biopsies culturing the same bacteria had a relative risk of all cause revision of 1.52 (0.82; 2.80). Conclusions. First-time aseptic loosening
Background. Polyethylene wear in both cemented and uncemented total hip arthroplasty (THA) lead to generation of particles with their access to the interface which has been responsible for periprosthetic osteolysis and subsequent loosening of cup and stem. Many studies have been published studying the pattern of polyethylene wear and its relation to the type of implant (cemented/ uncemented cup or ceramic/metal head) used. No study in our knowledge has strictly focused on the effect of cemented versus uncemented stem on the polyethylene wear rates. We tried to compare the polyethylene wear rates reckoned with software (Poly Ware REV 7) of ultra high molecular weight polyethylene (UHMWPE) in hybrid and uncemented THA and its effect on complications of total hip replacements. Method. We retrospectively reviewed pre-matched 56 patients in uncemented group with 112 patients in hybrid group on the basis of polyethylene wear rate, revision rates and clinical issues, with mean follow up of 9.42 and 7.25 years (yrs.) respectively. Results. Mean polyethylene wear rate in uncemented group was 0.048 milli metres per year (mm/yr.) and it was 0.082 mm/yr. in hybrid. Wear rate in hybrid group ceramic head (0.072mm/yr.) was significant when compared to wear rate ceramic head in uncemented group (0.053mm/yr.), also we found significant difference of poly wear in the metallic group as well. There was no difference in stem loosening and cup osteolysis in low wear (<.05 mm/yr.) and high wear group (>.05mm/yr.) in both uncemented and hybrid
INTRODUCTION:. The senior surgeon has performed THA in his practice for over 30 years, and, while performing
Introduction and Purposes. Custom made acetabular prosthesis are a valid option for the reconstruction after the resection of pelvic tumors. They should guarantee a stable and reliable reconstruction for the expected survival of the patient. Nevertheless in many cases periacetabular metastatic lesions have been compared to high grade (IIIA-B) Paprosky defects, but treated with low or intermediate longevity implants. Some complex post-traumatic scenarios or total hip arthroplasty (THA) multiple failures need a reconstruction according to oncologic criteria to fill in the huge defect and to obtain an acceptable function. The aim of the study is to compare 3D custom-made implants for tumors and for THA failures. Materials and Methods. Three custom-made implants after tumor resection (group A: 1 chondroblastic osteosarcoma, 1 bifasic synovialsarcoma, 1 high grade chondrosarcoma) were evaluated and compared to 3 acetabular complex reconstructions after non-oncologic bone defect (group B: 3 cases of aseptic loosening after at least 2 revisions). All the implants were case-based designed, 3D printed, and realized with porous or trabecular surfaces on a Titanium base prosthesis. Age range 16–70 ys in oncologic patients and 60–75 ys in non-oncologic patients. The bone defect to be reconstructed after tumor resection was classified according to Enneking zones (1 type 1-2-3 resection, 1 type 2 resection, 1 partial type 2 resection). Non-oncologic cases were comparable in term of remaining bone stock and classified according to Paprosky classification for acetabular defects as 1 type IIIA an 2 type IIIB. Complications, MSTS functional score, necessity of walking-aids were evaluated at minimum follow up of 1 year. Results. In both groups, good functional results were obtained (MSTS score 25/30 in both groups). No cases of aseptic loosening and no infection occured. After 3 months of partial or no weight-bearing on the operated limb, 3 patients were able to walk unaided and 3 walked with one cane or crutch. No limb length discrepancy (major than 2 cm) were observed. Limping was present in oncologic cases due to muscle resection. Overall better results in term of satisfaction and quality of life were obtained in younger (oncologic) patients. Conclusions. Complex
Introduction:. Large diameter metal on metal total hip arthroplasty (MOM THA) have shorter lengths of implantation due to increased failure caused by wear either at the articulating surface as well as the taper-trunnion interface. Taper-trunnion wear may be worse in large diameter MOM THA due the increased torque at the taper-trunnion interface. However little has been done to understand how differences in taper-trunnion geometry and trunnion engagement effects wear. The purpose of this study was to (1) measure the differences in taper geometry and trunnion engagement on the head-taper of 11/13, 12/14, and Type 1 taper designs and (2) to determine if taper geometry affects fretting, corrosion, and wear at the taper interface. Methods:. We identified 54 MOM
Introduction. Few studies are published about total hip arthroplasties (THA) in Parkinson's disease as it is often considered as a contraindication for hip replacement. THA for fracture is reported as a high complication rate surgery. Regarding bone quality these cases are assimilated to elderly patients and cemented implants are generally preferred. However, due to the improved length and quality of life, we face more potential indications for joint replacement. The aim of this study is to report our experience of cementless dual mobility implants for primary THAs for osteoarthrosis and
The following papers will be discussed during this session: 1) Staph Screening and Treatment Prior to Elective TJA; 2) Unfulfilled Expectations Following TJA Procedures; 3) Thigh Pain in Short Stem Cementless Components in THR; 4) Is the Direct Anterior Approach a Risk Factor for Early Failure?; 5) THA Infection - Results of a 2nd 2-Stage Re-implantation - Clinical Trial of Articulating and Static Spacers; 6)
Infected total hip arthroplasty (THA) is catastrophic, but it is treatable with a high degree of success. Two-stage revision with antibiotic-loaded cement spacer is the most widely accepted method of treatment, and considered by some to be the best method; however, single-stage treatment currently is used widely, and is gaining acceptance. Although antibiotic-loaded cement is considered to be important for antibiotic delivery after surgery, cementless revision is equally successful with one- or two-stage procedures. Delivery of antibiotics with depot methods, such as cement or bone graft impregnated with antibiotics, is considered to be very effective, but the antibiotic levels rapidly deteriorate after the first three days, leaving the cement itself vulnerable to colonization by resistant organisms. Nephrotoxicity is not common, but it does occur, and necessitates removal of the cement. This can be catastrophic if the implants are fixed with antibiotic-impregnated cement. Success rates of
Introduction. Upper femoral fractures include intra and extra-capsular fracture (ECF). For intra-capsular fracture (ICF), hemi-arthroplasty (HA) is the most commonly used treatment. Interest in total hip arthroplasty (THA) is growing because
Refinement of surgical techniques, anesthesia protocols, and patient selection has facilitated this transformation to same day discharge for arthroplasty care, most notably Partial Knee Arthroplasty (PKA). The trend for early discharge has already happened for procedures formerly regarded as “inpatient” procedures such as upper extremity surgery, arthroscopy, ACL reconstruction, foot and ankle procedures, and rotator cuff repair. Our program began focused on PKA and has now expanded to primary TKA and