Introduction. Unplanned reoperations (UROs) following corrective surgery for adult spinal deformity (ASD) present significant challenges for both patients and surgeons. Understanding the specific UROs types is crucial for improving patient outcomes and refining surgical strategies in ASD correction. Method. This retrospective analysis utilized data from the American College of Surgeons National Surgical Quality Improvement Program (ACS NSQIP) database spanning from 2017 to 2021. Patient information was extracted using specific CPT codes related to posterior pedicle fixation. Result. In a cohort of 1088 patients undergoing posterior spinal deformity corrections, we examined various preoperative factors to discern their correlation with reoperation prevalence. Our analysis revealed no statistically significant differences in reoperation prevalence concerning gender (male: 4.0%, p=0.131) or ethnicity (Hispanic: 4.2%, p=0.192). Similarly, no notable associations were identified for diabetes mellitus, smoking status, dyspnea, history of severe COPD, hypertension, ASA classification, or functional health status before surgery, with reoperation prevalences ranging from 3.2% to 8.8% and p-values spanning from 0.146 to 0.744. Overall, the reoperation prevalence within the entire cohort stood at 5.2% (55 cases). In terms of the types of reoperations investigated, spinal-related procedures emerged as the most prevalent, accounting for 43.7% (24 cases), followed closely by wound site revisions at 23.6% (13 cases). Additionally, gastrointestinal-related procedures and various other miscellaneous interventions, such as uroscopy, demonstrated reoperation prevalences of 7.2% (4 cases) and 25.5% (14 cases), respectively. Conclusion. our findings highlight the diverse spectrum of reoperation procedures encountered following posterior spinal deformity corrections, with wound site revisions and spinal-related interventions being the most prevalent categories. These results emphasize the complexity of managing UROs in spinal surgery and the need for tailored approaches and infection/incision protocols to address the specific challenges associated with each type of reoperation

Management of complex posterior malleolar fractures requires a detailed appreciation of ligamentous and bony anatomy for optimal fracture fixation and restoration of articular congruency. Pre operative planning is vitally important to determine the surgical strategy for complex ankle fractures. We evaluated pre operative planning strategy pre and post implementation of BOAST 12 guidelines (2016) focussing on pre operative CT scans prior to definitive fixation at a major trauma centre. A multi-surgeon retrospective review of prospectively collected data from 2013 to 2018 was performed at a major trauma centre. Patients who had sustained a posterior malleolar fracture and definitive fixation were identified. Information was collated from PICS, PACS, the trauma database and operative notes. 134 patients were identified over a 5 year period who had sustained a posterior malleolar fracture and had definitive fixation. (Pre BOAST guidelines = 61, Post BOAST guidelines = 73). Prior to the implementation of BOAST guidelines ¼ with posterior malleolar fractures did not have a pre operative CT scan (15/61). Post implementation of BOAST 12 90% (66/73)patients with fixation of posterior malleolus fractures had a pre operative CT scan. Posterior malleolus surgery most commonly took place In patients between 18–30 years. Following implantation of BOAST 12 guidelines there was a 15% increase in pre operative CT scanning for ‘complex ankle fractures'. Changes in national guidelines have heavily influenced pre operative planning strategy for ankle fractures at University Hospitals Birmingham. A detailed appreciation of fracture pattern pre operatively helps guide surgical strategy

Introduction and Objective. The surgical strategy for acetabular component revision is determined by available host bone stock. Acetabular bone deficiencies vary from cavitary or segmental defects to complete discontinuity. For segmental acetabular defects with more than 50% of the graft supporting the cup it is recommended the application of reinforcement ring or ilioischial antiprotrusio devices. Acetabular reconstruction with the use of the antiprotrusion cage (APC) and allografts represents a reliable procedure to manage severe periprosthetic deficiencies with highly successful long-term outcomes in revision arthroplasty. Objective. We present our experience, results, critical issues and technical innovations aimed at improving survival rates of antiprotrusio cages. Materials and Methods. From 2004 to 2019 we performed 69 revisions of the acetabulum using defrosted morcellized bone graft and the Burch Schneider anti-protrusion cage. The approach was direct lateral in 25 cases, direct anterior in 44. Patients were re-evaluated with standard radiography and clinical examination. Results. Eight patients died from causes not related to surgery, and two patients were not available for follow up. Five patients were reviewed for, respectively, non-osseointegration of the ring, post-traumatic loosening with rupture of the screws preceded by the appearance of supero-medial radiolucency, post-traumatic rupture of the distal flange, post-traumatic rupture of the cemented polyethylene-ceramic insert, and dislocation treated with new dual-mobility insert. Among these cases, the first three did not show macroscopic signs of osseointegration of the ring, and the only areas of stability were represented by the bone-cement contact at the holes in the ring. Although radiographic studies have shown fast remodeling of the bone graft and the implant survival range from 70% to 100% in the 10-year follow up, the actual osseointegration of the ring has yet to be clarified. To improve osseointegration of the currently available APC whose metal surface in contact with the bone is sandblasted, we combined the main features of the APC design long validated by surgical experience with the 3D-Metal Technology for high porosity of the external surface already applied to and validated with the press fit cups. The new APC design is produced with the 3D-Metal technology using Titanium alloy (Ti6Al4V ELI) that Improves fatigue resistance, primary stability and favorable environment for bone graft ingrowth. We preview the results of the first cases with short-term follow up. Conclusions. Acetabular reconstruction with impacted morcellized bone graft and APC is a current and reliable surgical technique that allows the restoration of bone loss with a high survival rate of the implant in the medium to long term. The new 3D Metal Cage is designed to offer high friction for the initial stability. The high porosity of the 3D Metal structure creates a favorable environment for bone growth, thus providing valid secondary fixation reproducing the results achieved with the 3D metal press fit cup

Extensive annulus fibrosus (AF) radial tears lead to intervertebral disc (IVD) herniation. While unrepaired defects in the AF are associated with postoperative reherniation and high IVD degeneration prevalence, current surgical strategies are limited to symptomatic treatment of pain and disregard the structural integrity of the AF. For all these reasons, this study is focused on i) designing polycaprolactone (PCL) electrospun implants that mimic the multi-lamellar fibrous structure of the native tissue and ii) assessing their ability to properly close and repair an AF defect in a sheep in vivo model. Oriented PCL mats were produced by electrospinning with average fiber diameters of 1.3µm and a tensile modulus (55±1MPa) matching the one of a native human AF lamella (∼47MPa). In vitro experiments demonstrated a spontaneous colonization of PCL mats by human and ovine AF cells. In vivo study was carried out on 6 sheep in which 5 lumbar discs were exposed using a left retroperitoneal approach. Defects (2×5mm, 2mm depth) were created in the outer annulus, with randomized distribution of conditions including 10-layer oriented or non-oriented mats, untreated and healthy groups. X-ray and MRI examinations were performed every month until explantations at 1, 3 and 6 months, followed by immuno-histological analysis. Data showed no dislocation of the implants, cell infiltration between the PCL mats and within the mats, and a continuous type I collagen tissue formation between the implants and the surrounding AF tissue. These results highlight that multi-layer PCL electrospun mat is a promising biomaterial for AF repair

This edition of the Cochrane Corner looks at the three reviews that were published in the second half of 2023: surgical versus non-surgical interventions for displaced intra-articular calcaneal fractures; cryotherapy following total knee arthroplasty; and physical activity and education about physical activity for chronic musculoskeletal pain in children and adolescents.

Around 1% of total hip replacements are follow by prosthetic joint infection (PJI). There is uncertainty about best treatment method for PJI, and the most recent high quality systematic reviews in unselected patients indicates that re-infection rates following one-stage and two-stage revision arthroplasty are relatively similar. In the absence of evidence randomised controlled trials will help to identify the most clinically and cost-effective treatment for PJI. Before such trials are conducted, there is a need to establish reasons for current practice and to identify whether trials are feasible. This study aimed to deliver research that would inform trial design. Specifically, we aimed to characterise consultant orthopaedic surgeons' decisions about performing either one-stage or two-stage exchange arthroplasty for patients with PJI after hip replacement and to identify whether a randomised trial comparing one-stage with two-stage revision would be possible. Semi-structured interviews were conducted with 12 consultant surgeons from 5 high-volume National Health Service (NHS) orthopaedic departments in the UK. Surgeons were sampled on the basis that they perform revision surgery for PJI after hip arthroplasty and final sample size was justified on the basis of thematic saturation. Surgeons were interviewed face-to-face (n=2) or via telephone (n=10). The interview study took place before design of a multicentre prospective randomised controlled trial comparing patient and clinical outcomes after one-stage or two-stage revision arthroplasty. Data were audio-recorded, transcribed, anonymised and analysed using a thematic approach, with 25% of transcripts independently double-coded. Results: There is no standard surgical response to the treatment of PJI and surgeons manage a complex balance of factors when choosing a surgical strategy. These include multiple patient-related factors, their own knowledge and expertise, available infrastructure and the infecting organism. Surgeons questioned whether evidence supports the emergence of two-stage revision as a method. They described the use of loosely cemented articulating spacers as a way of managing uncertainty about best treatment method. All surgeons were supportive of a randomised trial to compare one-stage and two-stage revision surgery for PJI after hip replacement. Surgeons reported that they would put patients forward for randomisation when there was uncertainty about best treatment. Surgeons highlighted the need for evidence to support their choice of revision. Some surgeons now use revision methods that can better address both clinical outcomes and patients' quality of life, such as loosely cemented articulating spacers. Surgeons thought that a randomised controlled trial comparing one-stage and two-stage exchange joint replacement is needed and that randomisation would be feasible. The next stage of the work was to design a multi-centre randomised controlled trial, this has been achieved and the trial is now ongoing in the UK

Objectives

The objective of this study was to develop a test for the rapid (within 25 minutes) intraoperative detection of bacteria from synovial fluid to diagnose periprosthetic joint infection (PJI).

We welcome letters to the Editor concerning articles that have recently been published. Such letters will be subject to the usual stages of selection and editing; where appropriate the authors of the original article will be offered the opportunity to reply.

We evaluated two reconstruction techniques for a simulated posterolateral corner injury on ten pairs of cadaver knees. Specimens were mounted at 30° and 90° of knee flexion to record external rotation and varus movement. Instability was created by transversely sectioning the lateral collateral ligament at its midpoint and the popliteus tendon was released at the lateral femoral condyle. The left knee was randomly assigned for reconstruction using either a combined or fibula-based treatment with the right knee receiving the other. After sectioning, laxity increased in all the specimens. Each technique restored external rotatory and varus stability at both flexion angles to levels similar to the intact condition. For the fibula-based reconstruction method, varus laxity at 30° of knee flexion did not differ from the intact state, but was significantly less than after the combined method.

Both the fibula-based and combined posterolateral reconstruction techniques are equally effective in restoring stability following the simulated injury.