Introduction. Adjusting an external fixator can be a daunting process for patients. Despite comprehensive training, patients often request supervision for the initial adjustments which may result in a prolonged hospital stay. Following the introduction of telemedicine during the pandemic we believed that this could be utilised to support patients with their fixator adjustments. A quality improvement project was implemented to assess and evaluate a change in practice from existing Face to Face support to a telemedicine format. The aim of the project was to reduce median length of stay (LOS). Materials & Methods. The telemedicine platform was introduced in our unit from April 2021 with the change in practice. Using the life QI platform, run charts were used to record the numbers of patients whose LOS was 4 days or less. Median LOS was assessed prior to and following introduction of the telemedicine platform. Service user experience with telemedicine as well as overall training and education by the CNS team was sought through on-line questionnaires. Results. Baseline data collected from April 2019 to April 2021 showed that our median LOS for patients undergoing external fixation was 6 days with 36% of patients being discharged at day 4 or earlier. After implementation of telemedicine, median LOS reduced to 4 days with 50% of patients leaving hospital in 4 days or less. Service user responses demonstrated that 100% felt that sufficient information was provided by the CNS team, a mean score of 8.4/10 was reported when asked how confident they were when adjusting the fixator. When asked how the service could be improved access to a recorded video was suggested. Conclusions. Initial fixator adjustment support via telemedicine is not appropriate for all of our patient group due to a lack of access or co-morbidities/ social issues that necessitate a prolonged hospital stay. However, this project has demonstrated that it has had positive long-term benefits within our service through reducing our median length of stay by 2 days without compromising patient satisfaction with their care

Aim. The analysis of synovial fluid has proved to be of crucial importance in the diagnostic process of prosthetic joint infections (PJI), suggesting the presence of an infection before the microbiological culture results. In this context, several studies illustrated the efficacy of synovial calprotectin in supporting the diagnosis of PJI [1, 2]. However, several testing methods have been explored to detect synovial calprotectin levels, emphasizing the need to use a standardized, rapid and rapid test. In this study, synovial calprotectin was analyzed by means of a commercial stool test [3] to explore whether the detected levels might predict PJIs and, therefore, being a promising tool for the fast and reliable diagnosis of this complication. Method. The synovial fluid of 55 patients underwent to revision of the prosthetic implant were analyzed. The measurement of calprotectin was carried out by of commercial stool test, following the protocol for liquid samples. Calprotectin levels were then compared to other synovial biomarkers of PJI such as leucocyte esterase and count and percentage of polymorphonuclear cells. Data analysis were performed using R software v4.1.1 (R Core Team) and package “pROC” [4]. Receiver operator characteristics curves were designed using culture test as gold standard to evaluate the area under curve (AUC) of each method (with DeLong method for confidence-interval calculation). Thresholds were calculated to maximize Youden's index; sensitivity and specificity were reported. One-to-one Pearson's correlations coefficient were calculated for each pair of methods. P value <0.05 were considered statistically significant. Results. Of the 55 synovial fluids analyzed, 13 patients were diagnosed with PJI and 42 with an aseptic failure of the implant. The specificity, sensitivity, and AUC of calprotectin resulted 0.90, 0.85, and 0.86 (95%CI: 0.72–0.99), respectively with a set threshold of 226.5 µg/g. The values of calprotectin had a moderate and statistically relevant correlation with the synovial leucocyte counts (r. s. = 0.54, p = 0.0003) and the percentage of polymorphonuclear cells (r. s. = 0.68, p = 0.0000). Conclusions. From this analysis, it can be concluded that synovial calprotectin is a valuable biomarker that correlates with other established indicator of local infection, delivering a rapid and reliable results and supporting the diagnostic process of PJI

The requirement for the peer support groups were born out of concern for the psychological wellbeing of the paediatric patients and to assess if this would improve their wellbeing during their treatment. Groupwork is a method of Social Work which is recognised as a powerful tool to allow people meet their need for belonging while also creating the forum for group members to empower one another. Social Work meet with all paediatric patients attending the limb reconstruction service in the hospital. The focus of the Medical Social Worker (MSW) is to provide practical and emotional support to the patient and their parent/guardian regarding coping with the frame. Some of the challenges identified through this direct work include patient's struggling with the appearance of the frame and allowing peers to see the frame. The peer support group aims to offer its attendees the opportunities to engage with fellow paediatric patients in the same position. It allowed them to visually identify with one another. We wanted to create a safe space to discuss the emotional impact of treatment and the frames. It normalises the common problems paediatric patients face during treatment. We assisted our participants to identify new coping techniques and actions they can take to make their journey through limb reconstruction treatment more manageable. Finally, we aimed to offer the parents space to similarly seek peer support with regard to caring for a child in treatment. All paediatric patients were under the care of the Paediatric Orthopaedic Consultant and were actively engaging with the limb reconstruction multi-disciplinary team (MDT). The patient selection was completed by the MDT; based on age, required to be in active treatment, or their frames were removed within one month prior to the group's commencement. Qualitative data was collected through written questionnaires and reflection from participants in MSW sessions. We also used observational data from direct verbal feedback from the MDT. In the first group, parents gave feedback due to participants age and completed written feedback forms. For our second group, initial feedback was collated from the participants after the first session to get an understanding of group expectations. Upon completion, we collected data from both the participants and the parents. Qualitative and scaling questions gathered feedback on their experience of participating in the group. We held two peer support groups in 2022:One group for patients aged between 3–6 years in January 2022 across two sessions, which was attended by four patients. The second group for young teenage patients aged between 11–15 years in April 2022 across four sessions, which was attended by five patients. The written feedback received from group one focused on eliciting the participant's experience of the groupwork. 100% of participants identified the shared experience as the main benefit of the groupwork. 100% of participants agreed they would attend a peer support group again, and no participant had suggestions for improvement to the group. Feedback did indicate that group work at the beginning of treatment could be more beneficial. In relation to the second group, 60% of the paediatric patients and their parents returned the questionnaires. All of the parent's feedback identified that it was beneficial for their child to meet peers in a similar situation. They agreed that it was beneficial to meet other parents, so they could get support and advice from one another. On a scale between 1 and 5, 5 being the highest score, the participants scored high on the group work meeting their expectations, enjoyment of the sessions, and the group work was a beneficial aspect of their treatment. All respondents would strongly recommend groupwork to other paediatric patients attending for limb reconstruction treatment. Overall, the MDT limb reconstruction team, found the peer support group work of great benefit to the participants and their parents. The MSW team identified that during a period on the limb reconstruction team, when a high number of patients were in active treatment, the workload of the MSW also increased reflecting this activity. Common issues and concerns were raised directly to MSW (particularly from group two) regarding numerous difficulties they experienced trying to cope with the frame. The group work facilitators created a space where the participants could get peer support, share issues caused by the frame, hear directly from others, and that they too experience similar feelings or issues. Collectively, they identified ways of coping and promoting their own wellbeing while in treatment. The participants in group two, subsequently created a group on social media, to be able to continue their newly formed friendships and to continue to update one another on their treatment journeys. The participants self-requested another group in the future. This was facilitated in November 2023, the facilitators sought more feedback from all participants and their parents after this session. These findings will contribute towards the analysis for the presentation. Peer support groupwork was presented at the hospital's foundation day and has been well received by senior management in the hospital, as a positive addition to the limb reconstruction service. The focus of the MDT in 2024, is to further develop and facilitate more peer support groups for our paediatric patients

Introduction. Clinical decision support tools are software that match the input characteristics of an individual patient to an established knowledge base to create patient-specific assessments that support and better inform individualized healthcare decisions. Clinical decision support tools can facilitate better evidence-based care and offer the potential for improved treatment quality and selection, shared decision making, while also standardizing patient expectations. Methods. Predict+ is a novel, clinical decision support tool that leverages clinical data from the Exactech Equinoxe shoulder clinical outcomes database, which is composed of >11,000 shoulder arthroplasty patients using one specific implant type from more than 30 different clinical sites using standardized forms. Predict+ utilizes multiple coordinated and locked supervised machine learning algorithms to make patient-specific predictions of 7 outcome measures at multiple postoperative timepoints (from 3 months to 7 years after surgery) using as few as 19 preoperative inputs. Predict+ algorithms predictive accuracy for the 7 clinical outcome measures for each of aTSA and rTSA were quantified using the mean absolute error and the area under the receiver operating curve (AUROC). Results. Predict+ was released in November 2020 and is currently in limited launch in the US and select international markets. Predict+ utilizes an interactive graphical user interface to facilitate efficient entry of the preoperative inputs to generate personalized predictions of 7 clinical outcome measures achieved with aTSA and rTSA. Predict+ outputs a simple, patient-friendly graphical overview of preoperative status and a personalized 2-year outcome summary of aTSA and rTSA predictions for all 7 outcome measures to aid in the preoperative patient consultation process. Additionally, Predict+ outputs a detailed line-graph view of a patient's preoperative status and their personalized aTSA, rTSA, and aTSA vs. rTSA predicted outcomes for the 7 outcome measures at 6 postoperative timepoints. For each line-graph, the minimal clinically important difference (MCID) and substantial clinical benefit (SCB) patient-satisfaction improvement thresholds are displayed to aid the surgeon in assessing improvement potential for aTSA and rTSA and also relative to an average age and gender matched patient. The initial clinical experience of Predict+ has been positive. Input of the preoperative patient data is efficient and generally completed in <5 minutes. However, continued workflow improvements are necessary to limit the occurrence of responder fatigue. The graphical user interface is intuitive and facilitated a rapid assessment of expected patient outcomes. We have not found the use of this tool to be disruptive of our clinic's workflow. Ultimately, this tool has positively shifted the preoperative consultation towards discussion of clinical outcomes data, and that has been helpful to guide a patient's understanding of what can be realistically achieved with shoulder arthroplasty. Discussion and Conclusions. Predict+ aims to improve a surgeon's ability to preoperatively counsel patients electing to undergo shoulder arthroplasty. We are hopeful this innovative tool will help align surgeon and patient expectations and ultimately improve patient satisfaction with this elective procedure. Future research is required, but our initial experience demonstrates the positive potential of this predictive tool

Total hip replacement procedures are among the most frequent surgical interventions in all industrialized countries. Although it is a routine operationliterature reports that important parameters regarding for example cup orientation and leg length discrepancy often turn out to be not satisfying after surgery. This paper presents a novel concept to improve the reproducibility and accuracy for implantation of cup and stem prosthesis at exactly the desired locations. Existing computer- based commercial products either offer software solutions for just pre-operative planning, or imageless navigation systems that are only used during surgery in the operating theatre. The innovation of our approach is based on an integrated computer-assisted solution that combines pre-operative planning and intra-operative navigation to support THR procedures. The software for pre-operative planning can process both, 3D CT images and standard 2D x-ray images. A custom-built navigation system using optical 3D localizing technology has been developed to transfer planning results to the OR. The main objective of our approach is to implant the artificial joint in a way to restore the natural anatomy of the joint before surgery as close as possible, or with exactly planned modifications. In particular, cup inclination, cumulative anteversion of cup and stem, CCD angle and lateral offset, centre of rotation, leg length discrepancy, and joint range of motion are considered. It is not necessary to determine numerical values for all of these parameters because our approach uses a unique procedure to record the natural anatomical situation by combining pre-operative planning and intra-operative navigation, and subsequently supports implantation of the prosthesis components by surgical navigation in order to restore this situation. In case planar 2D x-ray images are used for pre-operative planning accurate scaling of these images is a prerequisite for exact determination of relevant parameters. The patient-specific scaling factor depends on the distance of the hip joint rotation centre from the x-ray detector or film. We have designed a low-cost localization system to be mounted close to the x-ray apparatus. It localizes the 3D position of the rotation centre by small motions of the leg and eliminates uncertainties of conventional methods that are caused by improper positioning of a calibration body. Easy and robust setup and application have been key objectives for the development of our custom-built navigation system. Acquisition of intraoperative parameters for example includes the determination of the acetabular centre axis by localizing selected landmarks at the acetabular rim. Intra-operative parameters are combined with pre-operative parameters without needing sophisticated matching procedures with the pre-operative images. A preliminary surgical workflow that will be detailed in the conference presentation has been designed for evaluation of the concept using sawbones models. Based on the promising results of our laboratory tests we have started to prepare first clinical experiments in close cooperation with surgeons

Introduction. Locking plates can provide greater stability than conventional plates; however, reports revealed that fractures had a high incidence of failure without medial column support; the mechanical support of medial column could play a significant role in humeral fractures. Recent studies have demonstrated the importance of intramedullary strut in proximal humeral fracture fixation, the relationship to mechanical stability and supporting position of the strut remain unclear. The purpose of this study was to evaluate the influence of position of the intramedullary strut on the stability of proximal humeral fractures using a locking plate. Materials and methods. Ten humeral sawbone (Synbone) and locked plates (Synthes, cloverleaf plate), with and without augmented intramedullary strut (five in each group) for proximal humerus fractures, were tested using material testing machine to validate the finite element model. A 10 mm osteotomy was performed at surgical neck and a strut graft (10 cm in length) was inserted into the fracture region to lift the head superiorly. Each specimen was statically tested at a rate of 5 mm/min until failure. To build the finite element (FE) model, 64-slices CT images were converted to create a 3D solid model. The material properties of screws and plates were modeled as isotropic and linear elastic, with an elastic modulus of 110 GPa, (Poisson's ratio, n=0.3). The Young's moduli of cortical and cancellous bones were 17 GPa and 500 MPa (n=0.4), respectively. Three alter shifting toward far cortex by 1, 2, and 3 mm in humeral canal were installed in the simulating model. Results and discussion. The test result showed stiffness for only locked plate was 149.2±21.3 N/mm; and the plating combined with an intramedullary strut was 336.5±50.4 N/mm. On average, the stiffness was increased by 2.2 times in the augmented fixation relative to the only locking plate fixation. The finite element analytical results showed stiffness of 162 N/mm for fixation without strut, and 372 N/mm for those with strut augmentation. The stiffness between experiment and FE analysis agreed in 8.6% for the only locking plate case; and agreed in 10.5% for the case fixed with intramedullary strut. FE analysis showed the stability of construct increased 7%, 11% and 20% as the strut shift by 1, 2, and 3 mm, respectively. Gardner (2007) reported the importance of mechanical support at the medial region for maintenance of reduction when proximal humerus fracture treated with locking plates. Conclusion. The intramedullary strut may provide superior stability than the only locking plate fixation. The FE model provides a useful implement to find the optimal configuration of plate fixation. Acknowledgements. All authors thank the funding support from National Science Council (NSC 102-2628-B-650-001) and E-Da Hospital (EDPJ1020027)

Revision total hip arthroplasty (THA) is a challenging scenario following complex primary THA for developmental dysplasia of hip (DDH). Our study envisages the long-term outcomes of revision DDH and the role of lateral structural support in socket fixation in these young patients who may require multiple revisions in their life-time. Hundred and eighteen consecutive cemented revision THAs with minimum follow up of 5 years following primary diagnosis of DDH operated between January 1974 and December 2012 were analysed for their clinical and radiological outcomes. The mean follow-up of 118 patients was 11.0 years (5.1–39.6 years). The Kaplan Mier survivorship at 11 years with end point as revision for any reason was 89.8% (CI 81.1–98.4). Of 118 revisions, 88 acetabular revisions were for aseptic loosening. Out of the acetabular revisions, 21 had pre-existing structural bone grafts from primary surgery, of which only 3 needed structural re-grafting during revision. Amongst the remaining 18 hips, the lateral support from the previous graft facilitated revision with no requirement of additional structural graft. Sixty-three hips did not have any form of grafting during primary operation. Amongst them, 35 had bone grafting in revision surgery (18 structural grafting). This study reports the largest number of revision THAs with primary diagnosis of DDH with the longest follow up. In our experience, the lateral support from the structural graft done in primary operation appears to have provided benefit in subsequent revision socket fixation

Introduction. In hip arthroplasty, it has been shown that assembly of the femoral head onto the stem remains a non-standardized practice and differs between surgeons [1]. Pennock et al. determined by altering mechanical conditions during seating there was a direct effect on the taper strength [2]. Furthermore, Mali et al. demonstrated that components assembled with a lower assembly load had increased fretting currents and micromotion at the taper junction during cyclic testing [3]. This suggests overall performance may be affected by head assembly method. The purpose of this test was to perform controlled bench top studies to determine the influence of impaction force and compliance of support structure (or damping) on the initial stability of the taper junction. Materials and Methods. Test Specimens. Testing was performed on 36mm +5mm CoCr heads combined with prototype Ti6Al4V locking taper analogs both machined with approximately a 5.67º taper angle. To minimize sample variation, the locking taper analogs were dimensionally matched with CoCr femoral heads to maintain a uniform angle difference. Prior to testing, samples were cleaned with isopropanol and allowed to dry. Effect of Peak Force Magnitude. Testing was performed on a rigid setup where a 10N preload was applied to the femoral head axially. Heads were assembled with loads ranging from 2kN–10kN using an impaction tower and seating loads were recorded at a collection rate of 273kHz. After assembly, tensile loads were applied until the taper junction was fully disassembled and distraction loads were recorded at a collection rate of 500Hz. Effect of Damping. 40 durometer rubber pads were placed underneath the trunnions as well as to the striking surface of the impaction tower to simulate compliance in the supporting structure and the surgical instruments. Aside from the added damping, testing was performed identical to the rigid setup tests. Results. Taper stability (as assessed by disassembly forces) increased linearly with peak assembly force with an R2 value of 0.95 for both rigid and compliant groups (Figure 1). On average a 46% larger input energy was required in the compliant group to achieve a comparable impaction force to the rigid group (Figure 2). However, the correlation between the assembly load and distraction force was not affected. Discussion. As shown in previous studies, impact force has a large effect on initial taper stability. An interesting finding in this study was that system compliance has a large effect on the applied assembly force. The addition of a compliant setup was intended to simulate a surgical scenario where factors such as the patient's leg positioning, patient mass, surgical instruments, and surgical approach may influence the resulting compliance due to the dissipation of impaction energy and reducing the applied impaction force. Based on test results, surgical procedure as well as patient variables may have a significant effect of initial taper stability. For any figures or tables, please contact authors directly (see Info & Metrics tab above).

Quality Improvement (QI) is of increasing importance with its inclusion on training curricula and requirement for it in revalidation. Junior Doctors are a valuable, yet under utilised resource for NHS Trusts in patient safety/Quality Improvement activity. A Trainee led QI Academy, supported and administered by Medical Education was launched in our Trust. It offered education on Leadership and Management and support for projects from the Trust Service and Development teams. The QI Academy launch evening attracted over 60 Trainees and 17 QI projects were adopted. Subsequently a further 9 projects have been started and a number published in peer reviewed journals and presented internationally. The Academy was an attractive and supportive method of engaging new groups of doctors. QI is not as constrained as simple audit, and as such, engaging trainees has proven to be easier. Collaboration between a Core Faculty, Trainees and Trust Management ensured adequate and sustainable support for all projects, avoided duplication and fostered a closer relationship. We highly recommend Trust support of QI in junior doctors through Medical Education. Trusts benefit from improvements in patient care and quality whilst trainees learn valuable skills and benefit from presentations and publications

INTRODUCTION. Utilization of a patient management support system in our clinical pathway has been successfully demonstrated to both reduce the length of hospital stay after primary THA, as well as reducing the number of hospital readmissions. While successful in a general patient population, the ability of a patient management support system to reduce readmissions in subsets of high risk THA patients has not been evaluated. METHODS. We identified all primary THAs performed at a single institution between 2013 and 2015. Patient sex, age at the time of surgery, race, ASA grade, and 120-day readmissions were retrieved from the patient medical record. Similar to previous studies, the patient's home address was used as a proxy for socioeconomic status, with the estimated median income of a given patient being estimated as the median household income for patients of similar ethnicity living within their zip code as reported in the 2014 U.S. Census. A binary regression was used to determine if a model of patient factors (age, sex, race, socioeconomic status, and/or ASA grade) could accurately predict 120-day readmission after primary THA. Age and socioeconomic status were treated as a continuous variable and all other factors were categorical in nature, and the individual effects of each categorical factor on readmissions were also assessed. RESULTS. A sample of 889 primary THAs was identified using the above criteria, of which 754 (84.8%) were Caucasian and 124 (13.9%) were African Americans. Eleven patients (1.2%) either self-reported a different race or race was unknown. Due to the small number of patients in the other/unknown group, this subset was not included in our analysis. With the remaining sample of 878 THAs (475 females, 403 males; age 62.1 ± 13.0 years), a model containing age, sex, race, socioeconomic status, and ASA grade was unable to accurately predict the need for hospital readmission (R2 = 0.02). When assessed individually, the rates of hospital readmission did not differ by sex or race; however, those with ASA grades I or II had significantly lower readmission rates than patients with ASA grades III or IV (Table 1). DISCUSSION AND CONCLUSION. Despite a comprehensive program, the risk of readmission for patients with greater comorbidity burdens was double that of patients with low ASA grades

Introduction. One of the disadvantages of lateral decubitus position during arthroscopic rotator cuff repair is the difficulty to control arm rotation intraoperatively making it necessary to create additional portals for anchor placement or an additional scrubbed assistant to control arm rotation. Methods & Technique. We describe the use of commercially available TRIMANO® support arm from Arthrex as an easy device for secure positioning during arthroscopic rotator cuff repair in lateral decubitus position. Though initially marketed to be used for shoulder arthroplasties performed in beach chair position, the senior author has used TRIMANO® to perform arthroscopic rotator cuff repair in lateral decubitus position. The device is easily connected to the operating table side rail while the affected side forearm of the patient is placed in a disposable sterile foam arm holder and attached to the TRIMANO® arm. The “Click and Move” system of the TRIMANO® allows freedom to move the arm in any direction and also provides traction to distract the joint if needed. Conclusion. To conclude TRIMANO® arm is an easy to use flexible device for use in arthroscopic rotator cuff repair in lateral decubitus position decreasing the need for additional portals or an additional scrub assistant thereby decreasing the manpower required and cost of surgery

Bone metastases are common and severe complications of cancers. It is estimated to occur in 65–75% of breast and prostate cancer patients and cause 80% of breast cancer-related deaths. Metastasised cancer cells have devastating impacts on bone due to their ability to alter bone remodeling by interacting with osteoblasts and osteoclasts. Exercise, often used as an intervention for cancer patients, regulates bone remodeling via osteocytes. Therefore, we hypothesise that bone mechanical loading may regulate bone metastases via osteocytes. This provides novel insights into the impact of exercises on bone metastases. It will assist in designing cancer intervention programs that lowers the risk for bone metastases. Investigating the mechanisms for the observed effects may also identify potential drug targets. MLO-Y4 osteocyte-like cells (gift of Dr. Bonewald, University of Missouri-Kansas City) on glass slides were placed in flow chambers and subjected to oscillatory fluid flow (1Pa; 1Hz; 2 hours). Media were extracted (conditioned media; CM) post-flow. RAW264.7 osteoclast precursors were conditioned in MLO-Y4 CM for 7 days. Migration of MDA-MB-231 breast cancer cells and PC3 prostate cancer cells towards CM was assayed using Transwell. Viability, apoptosis, and proliferation of the cancer cells in the CM were measured with Fixable Viability Dye eFluor 450, APOPercentage, and BrDu, respectively. P-values were calculated using Student's t-test. Significantly more MDA-MB-231 and PC3 cells migrated towards the CM from MLO-Y4 cells with exposure to flow in comparison to CM from MLO-Y4 cells not exposed to flow. The preferential migration is abolished with anti-VEGF antibodies. MDA-MB-231 cells apoptosis rate was slightly lower in CM from MLO-Y4 cells exposed to flow, while proliferation rate was slightly higher. The current data showed no difference in cancer cells viability and adhesion to collagen between any two groups. On the other hand, it was observed that less MDA-MB-231 cells migrated towards CM from RAW264.7 cells conditioned in CM from MLO-Y4 cells stimulated with flow in comparison to those conditioned in CM from MLO-Y4 cells not stimulated with flow. TRAP staining results confirmed that there were less differentiated osteoclasts when RAW264.7 cells were cultured in CM from MLO-Y4 cells exposed to flow. Overall, this study suggests that when only osteocytes and cancer cells are involved, osteocytes subjected to mechanical loading can promote metastases due to the increased secretion of VEGF. However, with the incorporation of osteoclasts, mechanical loading on osteocytes seems to reduce MDA-MB-231 cell migration. This is likely because osteocytes reduce osteoclastogenesis in response to mechanical stimulation, and osteoclasts have been shown to support cancer cells. Animal studies will also be conducted to verify the pro- or anti-metastatic effect of mechanical loading that is observed in the in vitro part of this study

High energy chest trauma resulting in flail chest injury is associated with increased rates of patient morbidity. Operative fixation of acute rib fractures is thought to reduce morbidity by reducing pain and improving chest mechanics enabling earlier ventilator weaning.

A variety of operative techniques have been described and we report on our unit's experience of acute rib fracture fixation. Over 18 months, 10 patients have undergone acute rib fracture fixation. Outcome measures included; patient demographics, time ventilated pre-operatively, time ventilated post-operatively and time spent on ITU/HDU post operatively.

The mean time from presentation to surgery was 5 days (range 2–12 days). The mean time ventilated post operatively was 2 days (range 1–4 days) and the mean number of days spent on ITU/HDU post-operatively was 6 days (range 2–11 days).

Our results appear positive in terms of time spent ventilated post-operatively but no conclusion can be drawn as we have no comparable non-operative group. We have however shown, that rib fracture fixation can be carried out successfully and safely in a trauma centre. Further evidence on rib fracture fixation is required from a large, multi-centre randomised controlled trial.

Aim

To compare a variety of commercially available bone graft substitutes (BGS) in terms of promoting adherence, proliferation and differentiation of osteoprogenitor cells.

Anterior Cruciate Ligament injuries are a common cause of downgrade in Service personnel. The Multidisciplinary Injury Assessment Clinic (MIAC) is a service which patients can be referred to for expert musculoskeletal injury management. MIAC has a Fast Track (FT) referral system in place for imaging, and can subsequently refer isolated ACL injuries to a private provider for reconstruction. We examined this pathway in the South West region which has an overall population at risk of 19775. Over 4 years 173 knee injuries were referred to MIAC, of which 32 were ACL injuries. Of the 29 patients referred for MRI, the median time to imaging was 8 days with FT (n=13, range 2–14) and

15 days via the NHS (n=16, range 5–64). The majority of injuries were found to involve multiple pathologies (n=19), excluding them from FT surgery. Time to NHS clinic from point of referral took a median time of 54 days, and onward delay to surgery was 47 days. None of the referrals to the private provider for reconstruction were accepted (n=3). We have identified aspects of current referral and treatment pathways that are inefficient and discuss a current solution utilising Military surgeons.

Introduction. The management of fracture-related infection has undergone radical progress following the development of international guidelines. However, there is limited consideration to the realities of healthcare in low-resource environments due to a lack of available evidence in the literature from these settings. Initial antimicrobial suppression to support fracture union is frequently used in low- and middle-income countries despite the lack of published clinical evidence to support its practice. This study aimed to evaluate the outcomes following initial antimicrobial suppression to support fracture union in the management of fracture-related infection. Materials & Methods. A retrospective review of consecutive patients treated with initial antimicrobial suppression to support fracture healing followed by definitive eradication surgery to manage fracture-related infections following intramedullary fixation was performed. Indications for this approach were; a soft tissue envelope not requiring reconstructive surgery, radiographic evidence of stable fixation with adequate alignment, and progression towards fracture union. Results. This approach was associated with successful treatment in 51/55 (93%) patients. Fracture union was achieved in 52/55 (95%) patients with antimicrobial suppression alone. Remission of infection was achieved in 54/55 (98%) patients following definitive infection eradication surgery. Following antibiotic suppression, 6/46 (13%) pathogens isolated from intra-operative samples demonstrated multi-drug resistance. Conclusions. Initial antimicrobial suppression to support fracture healing followed by definitive infection eradication surgery was associated with successful treatment in 93% of patients. The likelihood of remission of infection increases when eradication surgery is performed in a healed bone. This approach was not associated with an increased risk of developing multi-drug-resistant infections compared to contemporary bone infection cohorts in the published literature

A hip fracture represents the extreme end of osteoporosis, placing a significant burden on secondary care, society, and the individual patient. The National Hip Fracture Database (NHFD) reports each hospital's attainment of the BPT with other measures, along with reporting outcomes. There is clearly wide variability in provision of orthogerriatrician (OG) services across the dataset. Unfortunately, despite overwhelming evidence that provision of an OG service is of benefit, it is presently challenging to recruit to this important specialty within the UK. Publicly available reports from the NHFD were obtained for each of the 177 participating hospitals for 2017. This was matched with information held within the annual NHFD Facilities Audit for the same period, which include hours of OG support for each hospital. This information was combined with a Freedom of Information request made by email to each hospital for further details concerning OG support. The outcome measures used were Length of Stay (LoS), mortality, and return to usual residence. Comparison was made with provision of OG services by use of Pearson's correlation coefficient. In addition, differences in services were compared between the 25% (44) hospitals delivering outcomes at the extremes for each measure. Attainment of BPT correlated fairly with LoS (−0.48) and to less of a degree with mortality (−0.1) and return home (0.05). Perioperative medical assessment contributed very strongly with BPT attainment (0.75). In turn perioperative medical assessment correlated fairly with LoS (−0.40) and mortality (−0.23) but not return home (0.02). Provision of perioperative medical assessment attainment was correlated fairly with total OG minutes available per new patient (0.22), total OG minutes available per patient per day (0.29) and number of days per week of OG cover (0.34); with no link for number of patients per orthogeriatrician (0.01). Mortality for the best units were associated with 30% more consultant OG time available per patient per day, and 51% more OG time available per patient. Units returning the most patients to their usual residence had little association with OG time, although had 59% fewer patients per OG, the best units had a 19% longer LoS. For all three measures results for the best had on average 0.5 days per week better routine OG access. There is no doubt that good quality care gives better results for this challenging group of patients. However, the interaction of BPT, other care metrics, level of OG support and patient factors with outcomes is complex. We have found OG time available per patient per day appears to influence particularly LoS and mortality. Options to increase OG time per patient include reducing patient numbers (ensuring community osteoporosis/falls prevention in place, including reducing in-patient falls); increasing OG time across the week (employing greater numbers/spreading availability over 7 days per week); and reducing LoS. A reduction in LoS has the largest effect of increasing OG time, and although it is dependent on OG support, it is only fairly correlated with this and many other factors play a part, which could be addressed in units under pressure

Traumatic rotator cuff injuries can be a leading cause of prolonged shoulder pain and disability, and contribute to significant morbidity and healthcare costs. Previous studies have shown evidence of socio-demographic disparities with these injuries. The purpose of this nationwide study was to better understand these disparities based on ethnicity, sex, and socio-economic status, in order to inform future healthcare strategies. Accident Compensation Corporation (ACC) is a no-fault comprehensive compensation scheme encompassing all of Aotearoa/New Zealand (population in 2018, 4.7 million). Using the ACC database, traumatic rotator cuff injuries were identified between January 2010 and December 2018. Injuries were categorized by sex, ethnicity, age and socioeconomic deprivation index of the claimant. During the 9-year study period, there were 351,554 claims accepted for traumatic rotator cuff injury, which totalled over $960 million New Zealand Dollars. The greatest proportion of costs was spent on vocational support (49.8%), then surgery (26.3%), rehabilitation (13.1%), radiology (8.1%), general practitioner (1.6%) and “Other” (1.1%). Asian, Māori (Indigenous New Zealanders), and Pacific peoples were under-represented in the age-standardized proportion of total claims and had lower rates of surgery than Europeans. Māori had higher proportion of costs spent on vocational support and lower proportions spent on radiology, rehabilitation and surgery than Europeans. Males had higher number and costs of claims and were more likely to have surgery than females. There were considerably fewer claims from areas of high socio-economic deprivation. This large nation-wide study demonstrates the important and growing economic burden of rotator cuff injuries. Indirect costs, such as vocational supports, are a major contributor to the cost suggesting improving treatment and rehabilitation protocols would have the greatest economic impact. This study has also identified socio-demographic disparities which need to be addressed in order to achieve equity in health outcomes

Aims. The number of females within the speciality of trauma and orthopaedics (T&O) is increasing. The aim of this study was to identify: 1) current attitudes and behaviours of UK female T&O surgeons towards pregnancy; 2) any barriers faced towards pregnancy with a career in T&O surgery; and 3) areas for improvement. Methods. This is a cross-sectional study using an anonymous 13-section web-based survey distributed to female-identifying T&O trainees, speciality and associate specialist surgeons (SASs) and locally employed doctors (LEDs), fellows, and consultants in the UK. Demographic data was collected as well as closed and open questions with adaptive answering relating to attitudes towards childbearing and experiences of fertility and complications associated with pregnancy. A descriptive data analysis was carried out. Results. A total of 226 UK female T&O surgeons completed the survey. All regions of the UK were represented. Overall, 99/226 (44%) of respondents had at least one child, while 21/226 (9.3%) did not want children. Median age at first child was 33 years (interquartile range 32 to 36). Two-thirds (149/226; 66%) of respondents delayed childbearing due to a career in T&O and 140/226 (69%) of respondents had experienced bias from colleagues directed at female T&O surgeons having children during training. Nearly 24/121 (20%) of respondents required fertility assistance, 35/121 (28.9%) had experienced a miscarriage, and 53/121 (43.8%) had experienced obstetric complications. Conclusion. A large proportion of female T&O surgeons have and want children. T&O surgeons in the UK delay childbearing, have experienced bias and have high rates of infertility and obstetric complications. The information from this study will support female T&O surgeons with decision making and assist employers with workforce planning. Further steps are necessary in order to support female T&O surgeons having families. Cite this article: Bone Jt Open 2023;4(12):970–979

Staphylococcus aureus osteo-articular infections (OAI) are frequently accompanied by blood stream infections (BSI) diagnosed by positive blood culture (BC). Microbiological protocols in adults advise prolonged intravenous antibiotics and repeat BC 48-hourly in the presence of a BSI, however evidence to support the systematic employment of these guidelines in paediatric patients is lacking. We aimed to determine whether there was an increased incidence of orthopaedic and systemic complications in patients with s aureus BSI, and whether a shorter duration of intravenous antibiotics was associated with the development of complications. Following ethical approval, the departmental surgical database was searched for patients that underwent surgery for acute OAI over a 5-year period. Patients with no sample taken for BC were excluded, as were those with other or no organisms identified from any site. Demographic and clinical data were captured, including duration of IV antibiotics and development of complications. Statistical significance was set at p<0.05. Following exclusions, 44 patients with a median age of 85 months remained to be analysed. Thirty patients (68%) had a positive BC. A positive BC was associated with a higher rate of systemic complications (p=0.026) but not orthopaedic complications (p=0.159). Patients who had developed any complication had a significantly longer duration of IV antibiotic treatment compared to those without complications (p<0.001). The presenting CRP levels were significantly higher in patients that developed complications (p=0.004). Patients with staphylococcal BSI in association with an OAI are at increased risk of developing systemic complications. In our cohort, a shorter duration of antibiotic use was not associated with the development of complications, which does not support the systematic use of long courses of IV antibiotics in s aureus BSI. Further research will be required to determine the ideal protocol for these patients