Introduction. Pelvic osteotomy such as Chiari osteotomy and rotational acetabular osteotomy (RAO) have been used successfully in patients with developmental dysplasia of the hip (DDH). However, some patients are forced to undergo total hip arthroplasty (THA) because of the progression of osteoarthritis. THA after pelvic osteotomy is thought to be more difficult because of altered anatomy of the pelvis. We compared six THAs done in dysplastic hips after previous pelvic osteotomy between 2008 and 2015 with a well-matched control group of 20 primary procedures done during the same period. Materials and methods. Six THAs for DDH after previous Pelvic osteotomy (three Chiari osteotomies and three RAOs) were compared with 20 THAs for DDH without previous surgery. The patients were matched for age, sex, and BMI. Minimum follow-up for both groups of patients was one year (range, 12–79 months and 12–77 months, respectively). The average interval from pelvic osteotomy to total hip arthroplasty was 19.8 years (range 12–26 years). Clinical and Radiological evaluations were performed. Results. Both groups had similar short-term results except clinical score. There were no signiï¬ï¿½cant differences in range of motion, intraoperative blood loss and operative time between the two groups. There were no infections, dislocations, intraoperative fractures, damaged nerves, or deep vein thromboses in either group. Clinical score according to Japanese Orthopaedic Association rating system at the most recent follow-up were significantly lower in previous pelvic osteotomy group (P=0.003). Lower clinical score was assumed to be caused by one patient with previous Chiari osteotomy who had contralateral sciatic nerve palsy which was unrelated to the surgery. Although we were concerned about the failures on the acetabular side in patients with THA after pelvic osteotomy because of osteosclerotic acetabular bone, no acetabular component exhibited loosening or revision. This result supports the thought that the pelvic osteotomy fragment maintains its blood supply and allows porous acetabular components to ingrow. Conclusion. Pelvic osteotomies do not seem to compromise the short-term clinical or radiographic outcome

Introduction. Acetabular dysplasia is a common cause of osteoarthritis of the hip. Chiari pelvic osteotomy enables medialization of the center of the femoral head and improvement of coverage over the femoral head for hip dysplasia and prevents or delays progression of degenerative arthritis. We reviewed 104 patients after this augmentation procedure. Patients and methods. Between 1989 and 2000, 167 patients with developmental dysplasia of the hip had undergone the surgery at university hospital. Among them, 104 patients were able to be traced after surgery for more than 10 years. The mean follow-up period was 15.5 years. There were 96 women and 8 men with an average age of 34.3 years at surgery. The average angle of osteotomy was 6.6 degree craniad to the horizontal plane. Ratio of migration of the distal pelvis was 42%. Results. 8 hips were replaced by prosthesis. Setting total hip arthroplasty as an end point, 10-year, 15-year and 20-year survival rate was 99.0, 92.3 and 70.0% respectively. Patients with minimal grade of osteoarthritis at the time of osteotomy preserved 5.4 mm joint space on plain radiographs of last time follow-up. Patients with moderate or severe grade of osteoarthritis at the time of surgery had only 2.5 mm joint space at last. All patients with minimal grade of osteoarthritis could avoid total hip arthroplasty. Conclusion. Chiari pelvic osteotomy can prevent progression of degenerative arthritis in patients with minimal grade of osteoarthritis for more than 15 years

We present simple but effective retractors used in pairs to expose the sciatic notch during Salter innominate osteotomy. We have found them to be useful for a wide range of procedures requiring similar exposure. We present them here in tribute to the memory of the designer Mercer Rang.

The Bernese periacetabular osteotomy (PAO) described by Ganz, et al. is a commonly used surgical intervention in hip dysplasia. PAO is being performed more frequently and is a viable alternative to hip arthroplasty for younger and more physically active patients. The procedure is challenging because pelvic anatomy is prohibitive to visibility and open access and requires four X-ray guided blind cuts around the acetabulum to free it from the hemi-pelvis. The crucial step is the re-orientation of the freed acetabulum to correct the inadequate coverage of the femoral head by idealy rotating the freed acetabular fragment.

Diagnosis and the decision for surgical intervention is currently based upon patient symptoms, use of two-dimensional (2D) radiographic measurements, and the intrinsic experience of the surgeon. With the advent of new technologies allowing three-dimensional reconstructions of hip anatomy, previous two-dimensional X-ray definitions have created much debate in standardizing numerical representations of hip dysplasia. Recent work done by groups such as Arminger et al. have combined and expanded two-dimensional measurements such as Center-Edge (CE) angle of Wiberg, Vertical-Center-Anterior margin (VCA) angle, Acetabular Anteversion (AcetAV) and applied them to three-dimensional CT rendering of hip anatomy. Further, variability in pelvic tilt is a confounding factor and has further impeded measurement translatability.

Computer assisted surgery (CAS) and navigation also called image-guided surgery (IGS) has been used in clinical cases of PAO with mixed results. The first appearing study of CAS/IGS in PAO was conducted by Langlotz, et. al 1997 and reported no clinical benefit to using CAS/IGS. However, they did conclude that the use of CAS/IGS is undoubtedly useful for surgeons starting this technically demanding procedure. This is supported by a more recent study done by Hsieh, et. al 2006 who conducted a two year randomised study of CAS/IGS in PAO and concluded its feasibility to facilitate PAO, but there was not an additional benefit when conventional PAO is done by an experienced surgeon. A study done by Peters, et. Al 2006 studying the learning curve necessary to become proficient at PAO found that “The occurrence of complications demonstrates a substantial learning curve” and thus makes a compelling argument for the use of CAS/IGS.

A major obstacle to navigation and CAS/IGS revolves around consistency, intra-operative time and ease of use. Custom made guides and implants may help circumvent these limitations. The use of CAS/CAM in developing custom made guides has been proven very successful in areas of oral maxillofacial surgery, hip arthroplasty, and knee replacement surgeries. Additionally, a significant study in the development of rapid prototyping guides in the treatment of dysplastic hip joints was done by Radermacher et. al 1998. They describe a process of using CAS/CAM within the operational theatre using a desktop planning station and a manufacturing unit to develop what they termed as “templates” to carry out a triple osteotomy.

Our group is evaluating and developing strategies in PAO using CAS/IGS and more recently using CAS and computer aided modeling (CAM) to develop custom made guides for acetabular positioning. Our first study (Burch et al.) focused on CAS/IGS in PAO using cadavers and yielded small mean cut (1.97± 0.73mm) and CE angle (4.9± 6.0) errors. Our recent study used full sized high-resolution foam pelvis models (Sawbones^®, Vashon, Washington) and used CAS/IGS to carry out the pelvic cuts and CAS/CAM to develop a acetabular positioning guide (APG) by rapid prototyping. The CAS/IGS pelvic cuts results were good (mean error of 3.18 mm ± 1.35) and support our and other studies done using CAS/IGS in PAO. The APG yielded high accuracy and was analysed using four angles with an overall mean angular error of 1.81 (0.55⁰)and individual angulation was as follows: CE 0.83° ± 0.53, S-AC 0.28° ± 0.19, AcetAV 0.41° ± 0.37, and VCA 0.68° ± 0.27. To our knowledge this is the first developed APG for PAO.

The APG we developed was to demonstrate the concept of using a positioning guide to obtain accurate rotation of the acetabular fragment. For a clinical application a refined and sleeker design would be required. Further, because working space within the pelvis is extraordinary constrained, once fitted the APG would need to remain and serve as an implantable cage capable of holding bone graft. A potential material is polyetheretherketone (PEEK). Customised PEEK implants and cages have been established in the literature and is a potential option for PAO. The benefits of an implant not only serve to constrain the acetabular fragment in the ideal position based upon the pre-operative plan, but may also provide the structural support for rotations not other wise possible.

Though CAS/IGS is a proven viable option, we envision a potentially simpler method for PAO, the use of a cut guide and an acetabular positioning implant. Using customized guides and implants could potentially circumvent the need for specialised intra-operative equipment and the associated learning curves, by providing guides that incorporate the pre-operational plan within the guide, constraining the surgeon to the desired outcome.

Computer-aided surgical systems commonly use preoperative CT scans when performing pelvic osteotomies for intraoperative navigation. These systems have the potential to improve the safety and accuracy of pelvic osteotomies, however, exposing the patient to radiation is a significant drawback. In order to reduce radiation exposure, we propose a new smooth extrapolation method leveraging a partial pelvis CT and a statistical shape model (SSM) of the full pelvis in order to estimate a patient's complete pelvis. A SSM of normal, complete, female pelvis anatomy was created and evaluated from 42 subjects. A leave-one-out test was performed to characterise the inherent generalisation capability of the SSM. An additional leave-one-out test was conducted to measure performance of the smooth extrapolation method and an existing “cut-and-paste” extrapolation method. Unknown anatomy was simulated by keeping the axial slices of the patient's acetabulum intact and varying the amount of the superior iliac crest retained; from 0% to 15% of the total pelvis extent. The smooth technique showed an average improvement over the cut-and-paste method of 1.31 mm and 3.61 mm, in RMS and maximum surface error, respectively. With 5% of the iliac crest retained, the smoothly estimated surface had an RMS surface error of 2.21 mm, an improvement of 1.25 mm when retaining none of the iliac crest. This anatomical estimation method creates the possibility of a patient and surgeon benefiting from the use of a CAS system and simultaneously reducing the patient's radiation exposure

Background. There are few reports including natural course of initial gap in total hip arthroplasty. The purpose of this study is to investigate the incidence of initial gap in the PSL type shells and its natural course. Methods. Total of 386 THAs with Trident or TriAD PSL shells were performed between January 2000 and December 2014. Exclusion criteria were shells with screw fixations (n=189), previous pelvic osteotomy (n=15) and less than 3 years’ follow-up (n=11). Finally, our study included 171 hips. Average age was 56.8 (17∼83) years at THA and average follow-up time was 8.3 (3∼16.3) years; 112 (66%) were women; and 120 hips (70.2%) had osteoarthrosis. As radiographic evaluation, we checked presence or absence of initial gap, maximum size of it, gap filling and cup stability. The presence of initial gap was defined as gap present on post-operative anteroposterior X-ray measuring 1mm or greater. Gap filling was defined as confirmed trabecular formation between the cup and acetabular floor without cup migration. And we determined the time to gap filling. As clinical evaluation, we retrospectively checked Harris Hip Score (HHS) at pre-operative and final follow-up period, and presence of shell revision. Furthermore, we compared clinical results with or without initial gap. Results. Initial gap was confirmed at 85 hips (49.7%) and mean maximum size was 2.1 (1∼6.3) mm. Mean gap filling occurred at 2.5 (± 1.4) years and there was no unstable cup. Comparing clinical results with or without initial gap, pre-operative HHS was not significantly associated with initial gap (57.8 and 56.3, respectively, p=0.41). HHS at final follow-up period was also not significantly associated with initial gap (88.4 and 87.5, respectively, p=0.49). There was no shell revision with or without initial gap. Discussion. Initial gap of hemispherical type shell is reported that its incidence is 16∼38% and initial gap is not associated with clinical outcome. Our results show that PSL type shell occurs initial gap more frequently than hemispherical type shells. Conclusion. Initial gap of PSL type shell was confirmed at 85 hips (49.7%) and mean gap filling occurred at 2.5 years. Initial gap did not affect shell revision and clinical outcome

In order to manage painful subluxation/dislocation secondary to cerebral palsy, 12 hips in 11 patients received combined femoral and Chiari pelvic osteotomies with additional soft tissues releases at an average age of 14.1 (9.1-17.8) years. Pain relief, improvement in the arc of movement, sitting posture and ease of perineal care was recorded in all, and these features have been maintained at an average follow-up of 13.1 (8-17.5) years. The improvement of general mobility was marginal, but those who were community walkers benefited the most. Pre-operative radiological measurements have been modified post-operatively to use lateral margin of the neo-acetabulum produced by the pelvic osteotomy. The radiological migration index improved from a mean of 80.6% to 13.7% [p<0.0001]. The mean changes in CE angle and Sharp's angle were 72° (range 56°- 87°) [p<0.0001] and 12.3° (range 9°- 15.6°) [p< 0.0001] respectively. Radiological evidence of progressive arthritic change was seen in only one hip, in which only a partial reduction had been achieved, and there was early joint space narrowing in another. Heterotopic ossification was observed in one patient with athetoid quadriplegia who remained pain free. In seven hips the lateral Kawamura approach, elevating the greater trochanter, provided exposure for both osteotomies and allowed the construction of a dome-shaped iliac osteotomy, while protecting the sciatic nerve. This combined procedure provides a stable hip with sustained pain relief for the adolescent and young adult presenting with pain

Developmental dysplasia of the hip (DDH) represents a heterogeneous group of deformities that are commonly associated with secondary osteoarthritis. Affected hips may require total hip arthroplasty (THA) for endstage disease and these cases can present unique challenges for the reconstructive surgeon. While the severity of deformity varies greatly, optimizing THA can be challenging even in the “mildly” dysplastic hip. These disorders are commonly characterised by acetabular deficiency with inadequate coverage of the anterolateral femoral head and proximal femoral abnormalities including excessive femoral antetorsion, coxa valga and femoral stenosis. In more severe cases, major femoral head subluxation or dislocation can add additional complexity to the procedure. In addition to the primary deformities of DDH, secondary deformities from previous acetabular or proximal femoral osteotomies may also impact the primary THA. Primary THA in the DDH hip can be optimised by detailed understanding of the bony anatomy, careful pre-operative planning, and an appropriate spectrum of techniques and implants for the given case. This presentation will review the abnormal hip morphologies encountered in the dysplastic hip and will focus on the more challenging aspects of THA. These include acetabular reconstruction of the severely deficient socket and in the setting of total dislocation, femoral implant procedures combined with corrective osteotomy or shortening, and issues related to arthroplasty in the setting of previous pelvic osteotomy. Despite the complexity of reconstruction for various dysplastic variants the clinical outcomes and survivorship of these procedures are good to excellent for most patients. Nevertheless, more complex procedures are associated with an increased complication rate and this should be considered in the surgical decision-making process

Hip dysplasia represents a wide spectrum of disease, and interest in the treatment of the disorder has increased with the development of newer surgical techniques and a greater understanding of young adult hip disorders. National hospital episode statistics (HES) were studied from 1999 to 2010. This data remains the current best source of information on surgical procedures outside of dedicated registries. Age stratified data was analysed for 7 separately coded operations for the treatment of hip dysplasia. Overall in the paediatric population there were 898 procedures in 2010 compared to 793 procedures in 2000, but with no detectable trend across that period. Equally, there were no great fluctuations in the small numbers of arthroplasty procedures recorded in either the paediatric or adult populations. There was, however, a clear increase in surgery being performed in adult patients. 210 primary pelvic osteotomies were performed in 2010, compared with only 77 in 2000, with a noticeable increase from 2005 onwards. A similar trend in other extra-articular procedures is seen, rising from 2 to 55 per year over the period studied. Overall, the level of surgical intervention has steadily risen from 104 procedures in 2000 to 422 in 2010, representing a fourfold rise in the number of operations being performed for hip dysplasia in the adult population over an 11 year period. The reasons for this are unclear. It may reflect improvements in the ability to diagnose and intervene earlier to prevent disease progression, but further research is also needed to better define the aetiology underlying these cases that present to the hip surgeon later in life

Background. Paediatric pelvic corrective surgery for developmentally dysplastic hips requires that the acetabular roof is angulated to improve stability and reduce morbidity. Accurate bony positioning is vital in a weight-bearing joint as is appropriate placement of metalwork without intrusion into the joint. This can often be difficult to visualise using conventional image intensifier equipment in a 2D plane. Methods. The ARCADIS Orbic 3D image intensifier produces CT-quality multi-axial images which can be manipulated intra-operatively to give immediate feedback of positioning of internal fixation. The reported radiation dose is 1/5 and 1/30 of a standard spiral CT in high and low quality modes, respectively. Results. We present 15 elective cases of paediatric pelvic osteotomy and fixation of SUFE, with use of the ARCADIS Orbic 3D image intensifier. Images were taken intra-operatively in order to confirm satisfactory fracture reduction and appropriate positioning of fixation devices avoiding joint spaces. This was achieved by 3D reconstruction and review of the surgical field in theatre. In all of the cases appropriate bony placement and position of fixation devices was demonstrated in the multi-axial images and 3D reconstruction. Conclusions. The use of 3D image intensification is a novelty in the UK. Our results suggest that the 3D image intensifier is a valuable aid in the field of paediatric surgery. Accurate positioning of internal fixation devices can be confidently confirmed ‘on-table’. The radiation dose is also significantly less than a standard spiral CT

Introduction. Through the paediatric LCP Hip plating system, the highly successful technique of the locking compression plate used in adult surgery, has been incorporated in a system dedicated to paediatrics. The purpose of this study was to review the outcome of the paediatric LCP Hip plate use in children, both with and without neuromuscular disease, for fixation of proximal femoral osteotomy for a variety of indications. Materials and methods. We retrospectively reviewed the notes and radiographs of all those children who have had Paediatric LCP Hip Plate for the fixation of proximal femoral osteotomy and proximal femur fractures in our institution, between October 2007 and July 2010, for their clinical progress, mobilization status, radiological healing and any complications. Results. Forty-three Paediatric LCP hip plates were used in forty patients for the fixation of proximal femoral osteotomies (n=40) and proximal femur fractures (n=3). The osteotomies were performed for a variety of indications including Perthes disease, DDH, Cerebral Palsy, Down's syndrome, coxa vara, Leg length discrepancy and previous failed treatment of SUFE. Twenty-five children were allowed touch to full weight bearing post operatively. Two were kept non-weight bearing for 6 weeks. The remaining 13 children were treated in hip spica due to simultaneous pelvic osteotomy or multilevel surgery for cerebral palsy. All osteotomies and fractures radiologically healed within 6 months (majority [n=40] within 3 months). There was no statistically significant difference (p = 0.45) in the neck shaft angle between the immediately postoperative and final x-rays after completion of bone healing. There were no implant related complications. Conclusion. The Paediatric LCP Hip Plate provides a stable and reliable fixation of the proximal femoral osteotomy performed for a variety of paediatric hip conditions in children with and without neuromuscular disease

Through the paediatric LCP Hip plating system (Synthes GmBH Eimattstrasse 3 CH- 4436 Oberdorff), the highly successful technique of the locking compression plate used in adult surgery, has been incorporated in a system dedicated to pediatrics. We are presenting the outcome of the paediatric LCP hip plating system used for a variety of indications in our institution. We retrospectively reviewed the notes and radiographs of all those children who have had Paediatric LCP Plate for the fixation of proximal femoral osteotomy and proximal femur fractures in our institution, between October 2007 and July 2010, for their clinical progress, mobilization status, radiological healing and any complications. Forty-three Paediatric LCP hip plates were used in forty patients (24 males and 13 females) for the fixation of proximal femoral osteotomies (n=40) and proximal femur fractures (n=3). The osteotomies were performed for a variety of indications including Perthes disease, developmental dysplasia of hip, Cerebral Palsy, Down's syndrome, coxa vara, Leg length discrepancy and previous failed treatment of Slipped Upper Femoral Epiphysis. Twenty-five children were allowed touch to full weight bearing post operatively. Two were kept non-weight bearing for 6 weeks. The remaining 13 children were treated in hip spica due to simultaneous pelvic osteotomy or multilevel surgery for cerebral palsy. All osteotomies and fractures radiologically healed within 6 months (majority [n=40] within 3 months). There was no statistically significant difference (p= 0.45) in the neck shaft angle between the immediately postoperative and final x-rays after completion of bone healing. Among the children treated without hip spica, 1 child suffered a periprosthetic fracture. Of the children treated in hip spica, 2 had pressure sores, 3 had osteoporotic distal femur fractures and 2 had posterior subluxations requiring further intervention. There were no implant related complications. The Paediatric LCP Hip Plate provides a stable and reliable fixation of the proximal femoral osteotomy performed for a variety of paediatric orthopaedic conditions

My experience with Birmingham Hip Resurfacing began in July 2000 and continues to this day for selected cases including OA, AVN, CDH and also following old fracture deformity and Femoral/Pelvic osteotomy. Early on, the criteria for patient selection expanded with increasing experience and positive acceptance by patients but then moderated as adverse reports including those from our National Joint Replacement Registry suggested a need for caution with Surface Replacement. Over 10 years, (July 2000 — July 2010), a personal series of 243 BHRs were followed (169 male — 74 female) with only one return to theatre in that time (4 days post op. to revise a poorly seated acetabular cup in a dysplastic socket). There were no femoral neck fractures in that 10 year period but 3 femoral cap/stem lucencies were known (2 female-1 male) with insignificant symptoms to require revision. The complete 10 year series of cases were then matched in the Australian National Joint Replacement Registry. No other revisions were identified by the Registry for all 243 cases. Soon after completing this encouraging outcome study however 3 revision procedures have been necessary (2 for sudden late head/neck failure including one of the three with known cap/stem lucencies and one for suspected pseudotumour/ALVAL). One healing stress fracture of the femoral neck and another further cap/stem loosening have also presented recently but with little in the way of symptoms at this stage. Surprisingly, there is little indication which case is likely to present with problems even in the presence of many cases done earlier where one would be cautious now to use a BHR but which have ongoing good outcomes. (e.g., AVN or the elderly osteoporotic patient). My journey therefore with Birmingham Hip Resurfacing over that first 10 years has been very positive and I believe it retains an important place for the younger patient with good bone quality. However it has become only recently apparent in my series of 243 cases that late onset unpredictable problems can arise which is likely to further narrow my selection criteria for this procedure. The likely outcome will be that it will have a more limited place in my joint replacement practice despite the very positive early experience

Introduction. The aim of this study was to assess the accuracy of aligning the cup with the transverse acetabular ligament (TAL) in total hip arthroplasty (THA) and the reproducibility of this procedure by using computer-assisted navigation. Methods. Between January 2011 and March 2012, 75 patients (81 hips) underwent primary THA using the posterolateral approach at our hospital. We excluded 4 hips with a history of pelvic osteotomy; thus, the study included 77 hips. We measured the anatomical anteversion of the TAL intraoperatively by aligning the inferomedial rim of the cup trial with the TAL using computer-assisted navigation. We set the abduction to 45° at measure of the anteversion of the TAL. Measurements for each hip were independently performed thrice by 2 surgeons chosen among 1 expert and 6 non-experts. The surgeon performing the measurement was blinded during this process; the navigation screen was turned away from the surgeon's field of view. Anatomical inclination and anteversion were measured with reference to the functional pelvic plane. The intraclass correlation coefficient (ICC) was used to assess intra- and inter-observer reliability. The mean value of all 6 measurements was used to determine the anteversion of the TAL in each hip. Results. The TAL was identified in 83% of the cases (64 of 77 hips). Intra-observer reliability was high for both the expert surgeon (ICC(1.1) = 0.851) and the non-expert surgeons (ICC(1.1) = 0.825). Inter-observer reliability was moderate (ICC(2.1) = 0.452). The mean difference in the anatomical anteversion measured by 2 surgeons was 7.0° (5.3°) (range, 0.3–21.3°). The mean anatomical anteversion of the TAL was 20.9° (7.0°) (range, 9.0–48.3°). Discussion and Conclusions. Recently, reports have suggested that the TAL can be used as a reference for determining a patient's native acetabular anteversion; the position of the cup can then be customized so that the face of the acetabular component is parallel to the TAL. We measured the anatomical anteversion of the cup trial aligned with the TAL using computer-assisted navigation and assessed the reproducibility of the alignment. Intra-observer reliability was high, and each surgeon was able to align the cup according to his target for of the TAL anteversion. However, inter-observer reliability was only moderate. This is because the TAL is a short ligament with some thickness, and the methods employed to align the cup trial with the TAL may differ among surgeons. The smallest anteversion of the TAL was 9°, and retroversion was not observed in any of the cases. Therefore, in our opinion, the TAL is useful as a reference for not positioning the cup in retroversion. However, in some cases with an excessive posterior pelvic tilt, the anteversion of the TAL may have been excessive and not necessarily optimal. Therefore, aligning the cup with TAL may not be the ideal method for all cases

[Introduction]. Total hip arthroplasty (THA) markedly improves pain, gait, and activities of daily living for most patients with osteoarthritis. However, pelvic osteotomy has been recommended for young and active patients with hip dysplasia, because THA in that population is associated with high rates of revision THA. The rotational acetabular osteotomy (RAO) of Ninomiya and Tagawa, and the eccentric rotational acetabular osteotomy of Hasegawa for hip dysplasia reportedly are successful in young and active patients. However, even after the surgery of RAO, osteoarthritis developed in some cases and leaded to the conversion to THA. The differences of bone quality of acetabulum have been reported between at the surgery of THA after RAO and at the surgery of primary THA. We should not discuss the results of these two THA equally. The purpose of this study is to report the results of THA after RAO. [Patients and Methods]. We retrospectively reviewed 33 patients (37 hips) treated by total hip arthroplasty after rotational acetabular osteotomy between 1992 and 2012. Five cases were performed RAO with valgus osteotomy. At the time of THA surgery, the overall mean age of the patients was 57.5 years (range, 39–72 years). The average of follow-up period was 7.0 years (range, 8–258 months). One surgeon (TT) evaluated the hips clinically using the Japanese Orthopaedics Association (JOA) score. The radiographic measurements were performed by the other physician (JY) blinded to the clinical scores. Radiographical examination was performed using AP X-ray. We evaluated the presence of osteolysis and loosening of the implants. We evaluated the stability of stem implants using Engh classification and of cup implants using Hodgkinson classification. [Results]. The cases of this study were converted to THA in an average 17.2 years after the surgery of RAO. JOA score was 55.7 points before THA and 86.7 points at the final follow-up. Osteolysis were found in five cases. Thirty-three cases showed good implant stability, but four cases showed fibrous union between cup and acetabulum. Three cases were converted to the revision THA due to fibrous union. All revision cases were acetabular side. [Discussion]. There were no reports about results of THA after RAO. Osteotomy should be considered for young patients because of the high rates of revision THA needed owing to prolongation of the average lifespan. McAuley et al reported the results of THA in patients 50 years and younger patients. They described the survival rates for femoral and acetabular components, using any revision as the end point, were 89% at 10-year followup and 60% at 15-year followup. Osteosclerosis of the acetabular roof bone should be careful in the case of THA after RAO. The cancellous bone could hardly be founded, even if the enough reaming was performed. Osteosclerosis may cause the difficulty in ingrowth of new bone into the implant, and lead to fibrous union between the acetabular roof bone and the implant. These two revision cases showed fibrous union before their THA. Primary fixation is very important in the case of THA after RAO. Primary fixation is very important in the case of THA after the RAO

The Pelvic Support Osteotomy (PSO) or Ilizarov Hip Reconstruction(IHR) is well described for the treatment of septic sequelae of infancy. The purpose of this study was to clinically, functionally and radiographically assess our short-term results of this procedure. 25 patients (16 boys, 9 girls) who had undergone a IHR using the Ilizarov/TSF construct over a period of 10 years for a variety of pathologies were reviewed. The mean age at surgery was 15 years 4 months. The pre-operative diagnoses were SCFE(10), hip sepsis (6), DDH (6) and Perthes (3). All had significant leg length discrepancies, 16 had a painful stiff hip, 6 had a painful mobile hip and 3 had a painless unstable hip. At surgery, a mean measured proximal valgus angle of 51° and a mean extension angle of 15° was achieved. Distal femoral lengthening averaged 4.2 cm and distal varus correction was a mean of 8°. The mean fixator time was 173 days. At a mean of 2 years and 7 months follow-up the lower-extremity length discrepancy had improved from a mean of 5.6 cm apparent shortening to 2.3 cm. Trendelenberg sign was eliminated in 18/25 cases. Improvements in range of hip movements and gait parameters were observed. Stance time asymmetry, step length asymmetry, pelvic dip and trunk lurch improved significantly. One patient had conversion to a total hip replacement after 7 years, 4 patients required re-do PSO due to remodelling of the proximal osteotomies, two had heterotopic ossification and two had significant knee stiffness due to lack of compliance. The early results of IHR are encouraging to equalise limb lengths, negate trendelenburg gait, provide a mobile hip with a reasonable axis and the possibility of conversion to THR in the future if needed. Complications need to be anticipated and the effects of remodelling and maintaining adequate knee range of motion must be emphasised

Introduction. Patients who are symptomatic with concurrent acetabular dysplasia and proximal femoral deformity may have Perthes disease. Osteotomies to correct both the acetabular and proximal femur deformities may optimise biomechanics and improve pain and function. In this study, we assessed the long-term results for such a combined procedure. Methods. We included patients who underwent concurrent pelvic and proximal femoral osteotomies by the senior surgeon (JNOH) with a minimum follow-up of 5 years. A modified triple pelvic interlocking osteotomy was performed to correct acetabular inclination and/or version with a concurrent proximal femoral osteotomy to correct valgus/varus and/or rotational alignment. We assessed functional scores, radiological paramenters, arthroplasty conversion rate, time interval before conversion to arthroplasty and other associated complications. Results. We identified 63 patients (64 hips) with a mean age of 29.2 years (range 14.3–51) at a mean follow-up of 10.1 years (range 5.1–18.5). The mean sourcil inclination postoperatively was 4.9. O. (range 1–12) compared to 24. O. (range 14.5–33) preoperatively. The mean Tonnis grade postoperatively was 2.2 (1–3) compared to 1.8 (range 1–2) preoperatively. At the last follow-up assessment, the mean Oxford Hip Score was 56 (range 60–47), Non-arthritic Hip Score was 71 (range 59–80) and UCLA activity score was 8 (range 5–10). There were 12 (18.8%) conversions to arthroplasty at a mean of 7.9 years (range 2.2–12.2) after surgery. Other associated complications include 1 sciatic nerve injury, 1 deep infection and 5 non-unions that required refixation. Discussion. Symptomatic acetabular dysplasia with concurrent proximal femoral deformity is difficult to treat. The use of combined pelvic and femoral osteotomies can optimise acetabular and femoral head alignment to improve pain and function with more than 4 out of 5 hips preserved at 10 years

Aims

A flexed knee gait is common in patients with bilateral spastic cerebral palsy and occurs with increased age. There is a risk for the recurrence of a flexed knee gait when treated in childhood, and the aim of this study was to investigate whether multilevel procedures might also be undertaken in adulthood.

Aims

Single-event multilevel surgery (SEMLS) has been used as an effective intervention in children with bilateral spastic cerebral palsy (BSCP) for 30 years. To date there is no evidence for SEMLS in adults with BSCP and the intervention remains focus of debate.