To propose a modified approach to measuring femoro-epiphyseal acetabular roof (FEAR) index while still abiding by its definition and biomechanical basis, and to compare the reliabilities of the two methods. To propose a classification for medial sourcil edges. We retrospectively reviewed a consecutive series of patients treated with periacetabular osteotomy and/or hip arthroscopy. A modified FEAR index was defined. Lateral center-edge angle, Sharp's angle, Tonnis angle on all hips, as well as FEAR index with original and modified approaches were measured. Intra- and inter-observer reliability were calculated as intraclass correlation coefficients (ICC) for FEAR index with both approaches and other alignments. A classification was proposed to categorize medial sourcil edges. ICC for the two approaches across different sourcil groups were also calculated. After reviewing 411 patients, 49 were finally included. Thirty-two patients (40 hips) were identified as having borderline dysplasia defined by an LCEA of 18 to 25 degrees. Intra-observer ICC for the modified method were good to excellent for borderline hips; poor to excellent for DDH; moderate to excellent for normal hips. As for inter-observer reliability, modified approach outperformed original approach with moderate to good inter-observer reliability (DDH group, ICC=0.636; borderline dysplasia group, ICC=0.813; normal hip group, ICC=0.704). The medial sourcils were classified to 3 groups upon its morphology. Type II(39.0%) and III(43.9%) sourcils were the dominant patterns. The sourcil classification had substantial intra-observer agreement (observer 4, kappa=0.68; observer 1, kappa=0.799) and moderate inter-observer agreement (kappa=0.465).
Introduction. The prevalence of adverse reactions to metal debris (ARMD) associated with metal on metal (MoM) hip arthroplasty has been reported to be as high as 69%. Such findings promoted the development of metal-artefact reducing sequence (MARS)-magnetic resonance imaging (MRI) classifications, with the aim of stratifying soft lesions by severity of disease. The
Registry studies on modified acetabular polyethylene (PE) liner designs are limited. We investigated the influence of standard and modified PE acetabular liner designs on the revision rate for mechanical complications in primary cementless total hip arthroplasty (THA). We analyzed 151,096 primary cementless THAs from the German Arthroplasty Registry (EPRD) between November 2012 and November 2020. Cumulative incidence of revision for mechanical complications for standard and four modified PE liners (lipped, offset, angulated/offset, and angulated) was determined using competing risk analysis at one and seven years. Confounders were investigated with a Cox proportional-hazards model.Aims
Methods
Lag screw cut-out is a serious complication of dynamic hip screw fixation in trochanteric hip fractures. Lag screw position is recognised as a crucial factor influencing the occurrence of lag screw cut-out. We propose a modification of the Tip Apex Distance (TAD) and hypothesize that it could enhance the reliability of predicting lag screw cut-out in these injuries. A retrospective study of hip fracture cases was conducted from January 2018 to July 2022. A total of 109 patients were eligible for the final analysis. The modified TAD was measured in millimetres, based on the sum of the traditional TAD in the lateral view and the net value of two distances in the anteroposterior (AP) view. The first distance is from the lag screw tip to the opposite point on the femoral head along the lag screw axis, while the second distance is from that point to the femoral head apex. The first distance is a positive value, whereas the second distance is positive if the lag screw is superior and negative if it is inferior. Receiver operating characteristic (ROC) curve analysis was used to assess the reliability of various parameters for evaluating the lag screw position within the femoral head. Factors such as reduction quality, fracture pattern according to the AO/OTA classification, TAD, Calcar-Referenced TAD, Axis Blade Angle, Parker’s ratio in the AP view, Cleveland Zone 1, and modified TAD were statistically associated with lag screw cut-out. Among the tested parameters, the novel parameter exhibited 90.1% sensitivity and 90.9% specificity for predicting lag screw cut-out at a cut-off value of 25 mm, with a p-value < 0.001. The modified TAD demonstrated the highest reliability in predicting lag screw cut-out. A value of 25 mm may potentially reduce the risk of lag screw cut-out in trochanteric hip fractures.
In early stage osteonecrosis of the femoral head (ONFH), core decompression (CD) is often performed; however, approximately 30% of CD cases progress to femoral head collapse. Bone healing can be augmented by preconditioning MSCs (pMSCs) with inflammatory cytokines. Another immunomodulatory approach is the timely resolution of inflammation using cytokines such as IL-4. We investigated the efficacy of pMSC and genetically modified MSCs that over-express IL-4 (IL4-MSCs) on steroid-associated ONFH in rabbits. Thirty-six male skeletally mature NZW rabbits received methylprednisolone acetate (20mg/kg) IM once 4 weeks before surgery. There were 6 groups:
CD alone – a 3 mm drill hole
hydrogel (HG) - 200 μl of hydrogel carrier MSCs–1 million rabbit MSCs pMSC - LPS (20 μg/ml) + TNFα (20 ng/ml) preconditioned MSCs IL4-MSCs – rabbit IL-4 over-expressing MSCs IL4-pMSCs – preconditioned IL-4 over-expressing MSCs Eight weeks after surgery, femurs were harvested, and evaluated by microCT, biomechanical, and histological analyses.Introduction
Methods
There is growing evidence that patients with lumbar spine fusion are at greater risk for postoperative dislocation following total hip arthroplasty. The purpose of this study is to review one author's experience with the modified direct lateral approach in patients with prior or subsequent lumbar spine fusion and total hip arthroplasty. Our IRB approved clinical database was queried for all primary total hip arthroplasties performed by the senior author from 1/1/2004 to 12/31/2016. All were performed via a modified direct lateral approach. Of these 1902 hips (1656 patients), 59 were identified in our medical records as patients who had a prior spine fusion or a spine fusion following THA. The extent of fusion was identified and reported. Radiographs were reviewed for acetabular position (abduction and anteversion) and leg length discrepancies. Records were reviewed and patients were contacted to determine if there were dislocations.Introduction
Methods
We investigated the preliminary results of femoral head necrosis treated by modified femoral neck osteotomy through surgical hip dislocation in young adults. 33 patients with femoral head osteonecrosis received modified femoral neck osteotomy through surgical hip dislocation from March 2015. 14 patients who had minimal 12 months of follow-up were reviewed radiographically and clinically (mean follow-up:16 months, 12–36 months). The mean age of the patients 32 years at the time of surgery (ranged from 16 to 42years). There were 6 women and 8 men. The cause of the osteonecrosis was steroid administration in 6, alcohol abuse in 4, trauma in 3, and no apparent risk factor in 1. According to the Ficat staging system, 1 hips was stage II, 9 hips III, and 4 hips stage IV. The posterior or anterior rotational angle was 90–180° with a mean of 143°. Clinical evaluation was performed in terms of pain, walk and range of motion on the basis of Merle d'Aubigné hip scores: 17–18 points are excellent, 15–16 are good, 13–14 are fair, 12 or less are poor. Recollapse of the final follow-up anteroposterior radiograph was prevented in 13 hips. One patient got 1 mm recollapse 18 months after surgery. No patient got progressive joint space narrowing. The Merle d'Aubigné score was excellent in 7 hips, good in 5, fair in 2. The preliminary results suggest that modified femoral neck osteotomy through surgical hip dislocation is in favor of young patients. But longer term follow-up is necessary.
The purpose of this study was to determine the complications after Bernese periacetabular osteomy (PAO) performed by one experienced surgeon using a minimally invasive modified Smith-Petersen approach. Between May 2012 and December 2015, 224 periacetabular osteotomies (PAO) in 201 patients were performed. The perioperative complications were retrospectively reviewed after reviewing clinical notes and radiographs. The mean age was 28.8 years with 179 females and 22 males. The most common diagnosis was acetabular dysplasia with some cases of retroversion. The average lateral centre edge (LCE) angle was 16.5°(−18–45) and mean acetabular index (AI) 16.79° (−3–50). Postoperatively the mean LCE angle was 33.1°(20–51.3) and mean AI 3.0° (−13.5–16.6). There were no deep infections, no major nerve or vascular injuries and only one allogenic blood transfusion. Nine superficial wound infections required oral antibiotics and two wounds needed a surgical debridement. There was one pulmonary embolus and one deep vein thrombosis. Nine (4%) cases underwent a subsequent hip arthroscopy and three (1.3%) PAO's were converted to a total hip arthroplasty after a mean follow-up of 22 months (3–50). Lateral femoral cutaneous nerve dysaesthesia was noted in 64 (28.6%) PAO's. In 55 (24.5%) an iliopsoas injection of local anaesthetic and steroid for persistent iliopsoas irritation during the recovery phase was given. The minimally invasive modified Smith-Petersen approach is suitable to perform a Bernese periacetabular osteotomy with a low perioperative complication rate. Persistent pain related to iliopsoas is a not uncommon finding and perhaps under-reported in the literature.
Periacetabular osteotomy has been described as an effective way of treating symptomatic hip dysplasia. We describe a new minimally invasive technique using a modification of the Smith Peterson approach. 189 consecutive patients operated on between March 2010 and March 2013 were included in the study. Patients who had undergone previous pelvic surgery for DDH were excluded. There were 174 females and 15 males. The mean age was 31 years (15–56) and the mean duration of follow-up was 29 months (14 – 53 months). 90% of cases were Tonnis grade 0 or 1. Twenty-three patients were operated on for primary acetabular retroversion. Functional outcomes were assessed using the NAHS, UCLA and Tegner activity scores. The surgical procedure is performed through an 8–10 cm skin crease incision; a soft tissue sleeve is elevated from the anterior superior iliac spine. The interval medial to the rectus femoris is developed. The hip joint is not opened and fixation of the osteotomy was with three 4.5mm cortical screws. A cell saver was routinely used.Introduction
Patients/Materials & Methods
The modified Dunn procedure has the potential to restore the anatomy in hips with slipped capital femoral epiphyses (SCFE) while protecting the blood supply to the femoral head. However, there is controversy about the risks associated with the procedure especially in the most severe capital slips. Therefore, we report on (1) clinical outcome, (2) the cumulative survivorship with endpoints AVN and/or OA progression and (3) radiographic anatomy of the proximal femur at followup in patients treated with a modified Dunn procedure for severe SCFE. We performed a retrospective analysis involving 46 hips of 46 patients treated with a modified Dunn procedure for severe SCFE (slip angle >60°) between 1999 and 2016. Followup averaged 8 years, (range 1–17) with 2 patients lost to followup after one year. The mean age was 13 years (range 9–19 years). Mean preoperative slip angle was 64° (range 60–90) and 14 out of 46 hips (30%) presented with unstable slips. Clinical scores and PROMs were evaluated and the hips were followed standard x-rays. Cumulative survivorship (Kaplan-Meier) with three defined endpoints: (1) AVN; (2) progression by at least one OA grade according to Tönnis; (3) non-preserved hip joint. (1)Mean Harris Hip score (HHS) was 93 points (66–100) and mean Hip Disability and Osteoarthritis Outcome Score (HOOS) was 90 points (67–100) at last followup. (2)Cumulative survivorship was 93% at 10-year followup. Three hips reached an endpoint. Two hips (4%) had AVN, one of them underwent hip arthrodesis. One hip had OA progression. (3)Postoperative slip angle was 7° (1–16). Alpha angle on axial radiograph was 39° (26–71) at followup. 41/44 hips (93%) had no OA (Tönnis 0). The modified Dunn procedure largely corrected slip deformities with low apparent risk of progression to avascular necrosis or osteoarthritis at mean 8-years followup. The AVN rate in severe and unstable (30%) capital slip was 4% (2 hips) with this procedure.
We report the outcome of 39 patients who underwent
a modified Pauwels’ intertrochanteric osteotomy for nonunion of
a femoral neck fracture following failed osteosynthesis. There were
31 men and eight women with a mean age of 47.2 years (34 to 59).
By Pauwels’ classification, there were 11 Type II fractures and
28 Type III fractures. The mean follow-up was 7.9 years (2 to 19).
In the 11 patients whose initial treatment had been osteotomy, union was
achieved in nine (81.8%). In 28 patients whose initial treatment
had been with a lag screw or a dynamic hip screw, union was achieved
in 27 (96.4%). Limb lengths were equalised in 14 of 16 patients
(87.5%) with pre-operative shortening. The mean neck-shaft angle
improved significantly from 100.5° (80° to 120°) to 131.6° (120°
to 155°) (p = 0.004). The mean modified Harris hip score was 85.6
points (70 to 97) and the mean modified Merle d’Aubigné score was
14.3 (11 to 18). Good to excellent functional outcomes were achieved
in 32 patients (88.8%). A modified Pauwels’ intertrochanteric osteotomy
is a reliable method of treating ununited fractures of the femoral neck
following failed osteosynthesis: coxa vara and shortening can also
simultaneously be addressed. Cite this article
We performed a modified, rotational acetabular osteotomy through a lateral transtrochanteric approach on 19 hips in 18 patients with a dysplastic joint. Six hips in six patients were operated on using the original approach. The mean age at operation was 28 years (14 to 54) and the mean period of follow-up 2.3 years (1 to 4.4). Clinical evaluation using the Merle d’Aubigné score showed excellent or good results in 76%. Radiologically, 15 hips showed good acetabular remodelling and no signs of progressive osteoarthritis. In ten hips (40%) there was chondrolysis and collapse of the transferred acetabulum or both within one year, although this gave only mild pain in some patients. Factors which were significantly associated with the grade of outcome included age at the time of operation, the thickness of the transferred acetabulum, failure to use a bone graft, and a transtrochanteric approach.
Cross linked polyethylene (XLPE) has gained popularity as a bearing surface of choice for younger patients despite only medium term results being available for wear rates. Concern remains regarding the long-term stability and durability of these materials. In order to address these issues we present the longest radiological and clinical follow-up of XLPE. Since 1986, we have prospectively studied a group of 17 patients (19 hips) that underwent a cemented Charnley low friction arthroplasty using a combination of 22.225mm alumina ceramic femoral head, a modified Charnley flanged stem and a chemically cross-linked polyethylene cup. We now report the 28 year clinical and radiological results.Introduction
Patients/Materials & Methods
Aims. Adult patients with history of childhood infection pose a surgical challenge for total hip arthroplasty (THA) due to distorted bony anatomy, soft-tissue contractures, risk of reinfection, and relatively younger age. Therefore, the purpose of the present study was to determine clinical outcome, reinfection rate, and complications in patients with septic sequelae after THA. Methods. A retrospective analysis was conducted of 91 cementless THAs (57 male and 34 female) performed between 2008 and 2017 in patients who had history of hip infection during childhood. Clinical outcome was measured using Harris Hip Score (HHS) and
Aims. Although there are various pelvic osteotomies for acetabular dysplasia of the hip, shelf operations offer effective and minimally invasive osteotomy. Our study aimed to assess outcomes following modified Spitzy shelf acetabuloplasty. Methods. Between November 2000 and December 2016, we retrospectively evaluated 144 consecutive hip procedures in 122 patients a minimum of five years after undergoing modified Spitzy shelf acetabuloplasty for acetabular dysplasia including osteoarthritis (OA). Our follow-up rate was 92%. The mean age at time of surgery was 37 years (13 to 58), with a mean follow-up of 11 years (5 to 21). Advanced OA (Tönnis grade ≥ 2) was present preoperatively in 16 hips (11%). The preoperative lateral centre-edge angle ranged from -28° to 25°. Survival was determined by Kaplan-Meier analysis, using conversions to total hip arthroplasty as the endpoint. Risk factors for joint space narrowing less than 2 mm were analyzed using a Cox proportional hazards model. Results. The mean Merle d'Aubigné clinical score improved from 11.6 points (6 to 17) preoperatively to 15.9 points (12 to 18) at the last follow-up. The survival rates were 95% (95% confidence interval (CI) 91 to 99) and 86% (95% CI 50 to 97) at ten and 15 years. Multivariate Cox regression identified three factors associated with radiological OA progression: age (hazard ratio (HR) 2.85, 95% CI 1.05 to 7.76; p = 0.0398), preoperative joint space (HR 2.41, 95% CI 1.35 to 4.29; p = 0.0029), and preoperative OA (HR 8.34, 95% CI 0.94 to 73.77; p = 0.0466). Conclusion.
We previously reported the five to ten-year results of the Birmingham Hip Resurfacing (BHR) implant. The purpose of this study was to evaluate the survivorship, radiographic results, and clinical outcomes of the BHR at long-term follow-up. We retrospectively reviewed 250 patients from the original cohort of 324 BHRs performed from 2006 to 2013 who met contemporary BHR indications. Of these, 4 patients died and 4 withdrew. From the 242 patients, 224 patients (93%) were available for analysis.
Dual-mobility (DM) bearings are effective to mitigate dislocation in revision total hip arthroplasty (THA). However, data on its use for treating dislocation is scarce. Aim of this study was to compare DM bearings, standard bearings and constrained liner (CL) in revision THA for recurrent dislocation and to identify risk factors for re-dislocation. We reviewed 100 consecutive revision THAs performed for dislocation from 2012 and 2019. 45 hips (45%) received a DM construct, while 44 hips (44%) and 11 hips (11%) had a standard bearing and CL, respectively. Rates of re-dislocation, re-revision for dislocation and overall re-revision were compared. Radiographs were assessed for cup positioning, restoration of centre of rotation, leg length and offset. Risk factors for re-dislocation were determined by cox regression analysis.
Aims. The direct anterior approach (DAA) for total hip arthroplasty (THA) has potential advantages over other approaches and is most commonly performed with the patient in the supine position. We describe a technique for DAA THA with the patient in the lateral decubitus position and report the early clinical and radiological outcomes, the characteristics of the learning curve, and perioperative complications. Methods. All primary DAA THAs performed in the lateral position by a single surgeon over a four-year period from the surgeon’s first case using the technique were identified from a prospectively collected database.
Introduction. The direct anterior approach (DAA) for total hip arthroplasty (THA) has gained popularity in recent years. Potential advantages over other surgical approaches include less postoperative pain, fewer postoperative precautions, and quicker early recovery. It is most commonly performed in the supine position with traction tables or table mounted bone hooks to facilitate exposure. In this study, we describe a reproducible surgical technique for DAA THA in the lateral decubitus position with use of standard THA equipment and report on our results and learning curve. Methods. A prospectively collected hip repository was queried for all primary THA DAA performed in the lateral position by a single surgeon over a 4-year period from the surgeon's first case utilizing the technique. Retrospective chart review was performed to identify complications and revisions.
The aims of the study were to report for a cohort aged younger than 40 years: 1) indications for HRA; 2) patient-reported outcomes in terms of the modified Harris Hip Score (HHS); 3) dislocation rate; and 4) revision rate. This retrospective analysis identified 267 hips from 224 patients who underwent an hip resurfacing arthroplasty (HRA) from a single fellowship-trained surgeon using the direct lateral approach between 2007 and 2019. Inclusion criteria was minimum two-year follow-up, and age younger than 40 years. Patients were followed using a prospectively maintained institutional database.Aims
Methods