Aim

The gold standard treatment for late acute hematogenous (LAH) periprosthetic joint infection (PJI) is surgical debridement, antibiotics and implant retention (DAIR). However, this strategy is still controversial in the case of total knee arthroplasty (TKA) as some studies report a higher failure rate. The aim of the present study is to report the functional outcomes and cure rate of LAH PJI following TKA treated by means of DAIR at a long-term follow-up.

Osteoarthritis of the knee is commonly a disease which afflicts more than one compartment of the knee so medial compartment arthritis is almost always associated with patellofemoral and or lateral compartment disease to a lesser extent. In a review of 250 consecutive osteoarthritic knees strictly unicompartmental involvement occurred in less than 15% of affected knees. To segmentally replace one compartment when more than one is involved may lead to a suboptimal result from the compartmental replacement as well as lead to pain and failure with mid- to long-term follow up. The long term results with tricompartmental replacement continue to show success rates in the order of 90–95% at 15–20 year follow-up with multiple designs and fixation types. Additionally failure to replace the patella, although popular in Europe, has led to increased anterior knee pain in studies in North America. The disadvantage of tricompartmental knee replacement is the extent of surgical trauma compared to compartmental replacement although newer less invasive approaches may lead to similar recovery to compartmental replacement

Aim. Spinal infections with and without aSCI represent a severe disease with a high lethality rate of up to 17%. The current treatment recommendations include an antimicrobial therapy and if necessary in combination with operative procedures. Aims of this study are the analysis of risk factors and treatment concepts and to compare the outcome of patients suffering a spinal infection with and without an aSCI. Method. Monocentric prospective case study from 2013 – 2015. Patients were examined using a diagnostic algorithm (CT-thorax/abdomen, MRI total-spine, blood cultures, dental chart, echocardiogram). A calculated antimicrobial therapy was initially administered and later changed according to the antibiotic resistance. Additional operative procedures were performed with respect to the clinical and radiological findings. Results. 68 patients (age 69.8 ± 13.7 years) were included. A Charlson-Comorbidity-Index of 3.9 ± 2.5 was calculated. An spinal infection with aSCI was associated with a significantly higher number of infected spinal segments (p=0.013). A longer duration of antibiotic treatment (statistically non-significant) and a higher operation rate was shown with aSCI. Also the inpatient and intensive-care unit treatment duration was significantly longer with aSCI. The number of treatment-associated complications and the lethality were equal in both groups. The age (odds-ratio 1.1 per one year increase; p=0.02) and the appearance of an epidural empyema (odds-ratio 7.9; p=0.04) have been identified as independent lethality factors. Conclusions. Patients with spinal infections are multimorbid and have multiple infectious origins, which warrant further diagnostic investigations. Treatment associated complications, lethality rates and clinical outcome of spinal infection with and without aSCI are comparable in a specialized unit. Lethality risk factors are age and presence of an epidural empyema. In subsequent studies the antibiotic treatment duration and the long-term follow up will be evaluated

In bone and joint infections, several materials can be used for local antibiotic elution at site of infection. Polymethylmethacrylate (PMMA) cement is often used. Recently the use of antibiotic impregnated dissolvable synthetic pure calcium sulphate beads [Stimulan R]1 has been used as an alternative, due to several perceived advantages. We present our experience of using Calcium sulphate beads in infections involving the upper limb. From Jan 2012 to Jan 2015, we used Calcium sulphate beads in 7 complex upper limb infections including 1 elbow replacement, 2 infected non unions, 2 shoulder replacement, 1 wrist fusion and I ORIF elbow. We used combination of Vancomycin and Gentamicin in the beads, using manufacturer's mixing guide for optimum setting. Arthroplasty infections underwent explantation, addition of antibiotic impregnated calcium sulphate beads in the joint space, followed by a second stage, and systemic antibiotics. Fracture non-union cases had surgical debridement, calcium sulphate beads and systemic antibiotics. Follow up (6months to 2 years) indicate no recurrence of infection in any case. The most common organisms isolated were Coagulase negative staphylococcus and Staphylococcus aureus. Others included Group B Streptococcus, Serratia marscesens and Corynebacterium spp. In 2 of 7 cases there was significant drainage from the wound. This settled without further input. For fracture non-union fixation, there was no need to do second procedure to remove beads as they dissolve. In cases of staged revisions, the beads were inserted at first stage with microbiological clearance at 2nd stage. At present there are no reports in the literature of the use of this product in the upper limb. Our experience suggests use of dissolvable pure Calcium sulphate beads impregnated with selected antibiotics, is an effective adjunct to current treatments. Aseptic drainage has been reported and this was seen in some of our cases. It is postulated that the use of Calcium sulphate beads in more superficial joints may lead to more drainage. It may be necessary to avoid packing any beads in the subcutaneous spaces and using lower volumes in upper limb. Further work will include long-term follow up and any evidence of relapse or recurrence of infection

While crosslinked polyethylene has reduced the rate of wear and osteolysis in THA, osteolysis still occurs and taper-corrosion induced wear has become recognised as an increasing problem especially when larger diameter metal bearings are used. Long-term follow up studies of newer polyethylene bearings continue to lag those of ceramic-on-ceramic bearings by several years. Ceramic-on-ceramic (CoC) bearing surfaces have consistently demonstrated reliable clinical results with when coupled with appropriated designed femoral stems and acetabular shells and have been shown to exhibit virtually no risk of adverse biologic reaction. Further, CoC bearings have not been associated with corrosion-induced adverse tissue reactions that occur with metal taper junctions. Revisions for squeaking have been associated with specific designs and materials, including the use of a titanium elevated metal rim on the acetabular side, and more flexible femoral components made of a beta-titanium alloy (TMZF) which had thin necks and relatively small tapers. Multiple clinical studies document excellent long-term survival of CoC bearing couples in young patients with revision for any reason as the primary endpoint. Our own experience with 341 hips in patients under 50 with 2–15 years and average 9.1-year follow up demonstrates a 95% overall survivorship (revision for any reason) at 13 years. CoC bearings continue to show excellent durability in young, high demand patients with an absence of osteolysis in any case. CoC bearings continue to represent an excellent alternative to bearing couples containing polyethylene

Introduction. The optimal management of severe tibial and/or femoral bone loss in a revision total knee arthroplasty (TKA) has not been established. Reconstructive methods include structural or bulk allografts, impaction bone-grafting with or without mesh augmentation, custum prosthetic components, modular metal augmentations of prosthesis and tumor prosthesis. Recently metaphyseal fixation using porous tantalum cones (Zimmer, Warsaw, IN) has been proposed as alternative strategy for severe bone loss. Objectives. The purposes of this study were to determine the clinical and radiographic outcomes in patients who underwent revision knee arthroplasty with tantalum cones with a minimum of 5-year follow-up. Methods. From November 2005 to August 2008 a total of 26 porous tantalum metaphyseal cones were used to reconstruct severe tibial and/or femoral bone loss in 18 patients during revision TKA at a single institution. There were 12 females and 6 males with an average age of 73 years (range 55–84) at the time of revision. The mean clinical and radiographic follow-up was 6.3 years (range, 5–8). The reasons for revision were aseptic loosening (5 cases) and deep infection (13 cases). A Two stage procedure was used in all septic cases. According to the Anderson Orthopaedic Reseach Institute (AORI) bone defects classification all femoral and tibial defects were rated 2B and 3 (3 T2b, 9 T3, 3 F2b and 10 F3). A femoral cone was inserted in 6 patients, a tibial cone was inserted in 5, a double cone in 6 (femoral and tibial), and a triple cone in 1 (1 femoral and 2 tibial). A constrained condylar implant (LCCK, Zimmer, Warsaw) was inserted in 6 patients and a rotating hinge knee implants (RHK, Zimmer, Warsaw, IN) in 12 pateints. All patients were prospectively followed for clinical and radiographic evaluation preoperatively and postoperatively at 1, 3, 6 months, one year and yearly thereafter. Results. Knee Society knee scores improved from a mean of 31.3 points before surgery to 76.7 points at latest followup (p < 0.001). Knee Society function scores improved from a mean of 21.7 points before surgery to 65.4 points at latest followup (p < 0.001). The average flexion contracture was 6° and the average flection was 88°. At the time of the latest follow-up the average flexion contraction was 3° and the average flexion was 105°. No radiolucent lines were seen between the cones and the adjacent tibial and femoral bone at the latest follow-up. There was no evidence of loosening or migration of any implant at the time of the final follow-up. There have been two reoperations for recurrent infection (11%). Conclusions. Our experience demonstrates excellent clinical and radiographic mid-term outcomes and confirms that metaphyseal fixation with porous tantalum cones can be achieved. Long-term follow up and comparative studies are necessary

Femoral revision in cemented THA might include some technical difficulties, based on loss of bone stock and cement removal, which might lead to further loss of bone stock, inadequate fixation, cortical perforation or consequent fractures. Femoral impaction grafting, in combination with a primary cemented stem, allows for femoral bone restoration due to incorporation and remodelling of the allograft bone by the host skeleton. Historically it has been first performed and described in Exeter in 1987, utilizing a cemented tapered polished stem in combination with morselised fresh frozen bone grafts. The technique was refined by the development of designated instruments, which have been implemented by the Nijmegen group from Holland. Indications might include all femoral revisions with bone stock loss, while the Endo-Clinic experience is mainly based on revision of cemented stems. Cavitary bone defects affecting meta- and diaphysis leading to a wide or so called “drain pipe” femora, are optimal indications for this technique, especially in young patients. Contraindications are mainly: septical revisions, extensive circumferential cortical bone loss and noncompliance of the patient. Generally, the technique creates a new endosteal surface to host the cemented stem by reconstruction of the cavitary defects with impacted morselised bone graft. This achieves primary stability and restoration of the bone stock. It has been shown, that fresh frozen allograft shows superior mechanical stability than freeze-dried allografts. Incorporation of these grafts has been described in 89%. Technical steps include: removal of failed stem and all cement, reconstruction of segmental bone defects with metal mesh (if necessary), preparation of fresh frozen femoral head allografts with bone mill, optimal bone chip diameter 2–5 mm, larger chips for the calcar area (6–8 mm), insertion of an intramedullary plug including central wire, 2 cm distal the stem tip, introduction of bone chips from proximal to distal, impaction started by distal impactors over central wire, then progressive larger impactors proximal, insertion of a stem “dummy” as proximal impactor and space filler, removal of central wire, retrograde insertion of low viscosity cement (0.5 Gentamycin) with small nozzle syringe, including pressurization, and insertion of standard cemented stem. The cement mantle is of importance, as it acts as the distributor of force between the stem and bone graft and seals the stem. A cement mantle of at least 2 mm has shown favorable results. Post-operative care includes usually touch down weightbearing for 6–8 weeks, followed by 4–6 weeks of gradually increased weightbearing with a total of 12 weeks on crutches. Relevant complications include mainly femoral fractures due to the hardly impacted allograft bone. Subsidence of tapered polished implants might be related to cold flow within the cement mantle, however, could also be related to micro cement mantle fractures, leading to early failure. Subsidence should be less than 5 mm. Survivorship with a defined endpoint as any femoral revision after 10-year follow up has been reported by the Exeter group being over 90%, while survivorship for revision as aseptic loosening being above 98%. Within the last years various other authors and institutions reported about similar excellent survivorships, above 90%. In addition, a long-term follow up by the Swedish arthroplasty registry in more than 1180 patients reported a cumulative survival rate of 94% after 15 years. Impaction grafting might technically be more challenging and more time consuming than cement-free distal fixation techniques. It, however, enables a reliable restoration of bone stock which might especially become important in further revision scenarios in younger patients

Background. Since its first description, the pathology, natural history and treatment of lateral epicondylitis have remained controversial. For those who fail conservative management, surgery remains an option. The optimal method of surgery remains debatable and is further confounded by a relative lack of long-term follow up studies. Material and methods. This study describes a previously unpublished surgical technique and presents its long term results. Patients undergoing this open technique were reviewed using the HSS-1 and Mayo elbow performance assessment tools as well as having grip strength and subjective outcome recorded. Results. From June 1986 to December 2001 inclusive, 158 consecutive patients (171 elbows) underwent surgery in a single surgeon series. They were followed up to a mean of 9.8 years. The mean age of the group was 42 years and 86.7% of patients were available for follow up. Subjectively, 94.6 % were good to excellent with 92.6-94.0% good to excellent using the HSS-1 and Mayo scores respectively. No differences were noted in grip strength. No patient required revision surgery. Discussion/Conclusions. This repeatable open technique offers excellent results with low complications at a mean follow up of 9.8 years. These results compare favourably in terms of numbers followed up, length of follow up and outcome and offer strong evidence of its efficacy

Patellofemoral unicompartmental joint replacement is a controversial subject with a relatively small evidence base. Of the 50,000 total knee arthroplasties performed each year in the UK, approximately 10% are performed for predominantly patellofemoral arthritis. There are several patellofemoral unicompartmental prostheses on the market with the National Joint Registry recording 745 such prostheses used in 2007. Most evidence in favour of this procedure comes from experience with the Avon prosthesis (Stryker) predominantly from designer-surgeons. The FPV patellofemoral joint replacement (Wright Medical) has been in use in Europe for several years. The instruments have recently been redesigned and the device marketed in the UK. In 2007 the FPV had 5.9% market share (n=44). We present our early experience with the FPV patellofemoral joint replacement, which to our knowledge, is the first clinical outcome series for this prosthesis. 33 consecutive FPV joint replacements in 29 patients were performed between April 2007 and September 2009 for unicompartmental patellofemoral OA. All cases were performed or directly supervised by the senior author. Results are presented with a minimum follow-up of six months. Oxford and American Knee Society scores (AKSS) were obtained on all patients preoperatively and at subsequent outpatient visits. Mean preoperative AKSS knee score was 49.7 points and postoperative scores at 6 months and 1 year were 82.5 and 86.4 respectively. Mean Oxford score preoperatively was 30.4 (37%) and at 6 months and 1 year were 21.3 (56%) and 11.2 (77%) respectively. There were no complications related to the implant. One knee required a secondary open lateral release due to inadequate balancing at the index procedure. Further medium to long-term follow up data are required, but our initial experience with this device is encouraging

Total knee replacement is one of the most successful procedures in orthopaedic surgery. Although originally limited to more elderly and less active individuals, the inclusion criteria for TKA have changed, with ever younger, more active and heavier patients receiving TKA. Currently, wear debris related osteolysis and associated prosthetic loosening are major modes of failure for TKA implants of all designs. Initially, tibial components were cemented all-polyethylene monoblock constructs. Subsequent long-term follow up studies of these implants have demonstrated excellent durability in survivorship studies out to twenty years. Aseptic loosening of the tibial component was one of the main causes of failure in these implants. Polyethylene wear with osteolysis around well fixed implants was rarely (if ever) observed. Cemented metal-backed nonmodular tibial components were subsequently introduced to allow for improved tibial load distribution and to protect osteoporotic bone. Long-term studies have established that many one-piece nonmodular tibial components have maintained excellent durability. Eventually, modularity between the polyethylene tibial component and the metal-backed tray was introduced in the mid-80s mainly to facilitate screw fixation for cementless implants. These designs also provided intra-operative versatility by allowing interchange of various polyethylene thicknesses, and to also aid the addition of stems and wedges. Other advantages included the reduction of inventory, and the potential for isolated tibial polyethylene exchanges as a simpler revision procedure. However, since the late 1980's, the phenomena of polyethylene wear and osteolysis have been observed much more frequently when compared with earlier eras. The reasons for this increased prevalence of synovitis, progressive osteolysis, and severe polyethylene wear remain unclear, but it is likely associated with the widespread use of both cementless and cemented modular tibial designs. Backside wear between the metal tray and polyethylene has been implicated. Recent RSA studies comparing fixation of all-polyethylene to modular components has shown that their RSA migration patterns are superior and fixation is in fact better with the all-polyethylene construct. Further, in a recent meta-analysis, all-polyethylene components were equivalent to metal-backed components regarding revision rates and clinical scores. The promise of modular tibial components affording a simple liner exchange to revise a knee has not borne out in the literature. Several studies have revealed that the effectiveness of isolated tibial insert exchange in revision TKR is of limited value. Isolated tibial insert exchange led to a surprisingly high rate of early failure. Tibial insert exchange as an isolated method of total knee revision should therefore be undertaken with caution even in circumstances for which the modular insert was designed and believed to be of greatest value. Because of the modularity, extra materials, and extra processing, modular tibial components are significantly more expensive than all-polyethylene components