Aims. Trauma & Orthopaedic (T&O) surgery has come under scrutiny for lagging behind other medical specialties in promoting gender and cultural equity and diversity within their workforce. The proportions of female, ethnic minority, and sexual and gender minority individuals within orthopaedic membership bodies are disproportionate to the populations they serve. The aim of this study is to report the findings of a national workforce survey of demographics and working patterns within T&O in Scotland. Methods. A questionnaire devised by a working group was delivered by the Client Analyst and Relationship Development (CARD) group. Utilizing a secure third party ensured anonymity for all respondents. Data were recorded and analyzed by the CARD group. Results. A total of 353 responses were recorded, representing 71% of the known workforce. Overall, 261 respondents (74%) identified as male, 85 (24%) female, and seven (2%) preferred not to say. For specialist trainee (ST)3 to ST6, 148 (42%) were female, and for ST7 to ST8, 131 (37%) were female. In total, 226 of all respondents (64%) were white-British, 35 (10%) were white-European, and 92 (26%) were of an ethnic minority background. A total of 321 of respondents (91%) identified as heterosexual, 14 (4%) preferred not to say, and 18 (5%) identified as LGBTQ+ or preferred to self-describe. Conclusion. This is the largest national workforce survey in contemporary surgical literature. The findings demonstrate a greater proportion of female surgeons overall compared to other studies in T&O. This proportion of females was highest among more junior trainees. The Scottish T&O workforce is more ethnically diverse than the demographics of the population it serves. This study suggests that T&O in Scotland is an evolving speciality in terms of equality and diversity, and is making positive progress. Cite this article: Bone Jt Open 2025;6(1):103–108

Aims. The aims of this study were to describe the demographic, socioeconomic, and educational factors associated with core surgical trainees (CSTs) who apply to and receive offers for higher surgical training (ST3) posts in Trauma & Orthopaedics (T&O). Methods. Data collected by the UK Medical Education Database (UKMED) between 1 January 2014 and 31 December 2019 were used in this retrospective longitudinal cohort study comprising 1,960 CSTs eligible for ST3. The primary outcome measures were whether CSTs applied for a T&O ST3 post and if they were subsequently offered a post. A directed acyclic graph was used for detecting confounders and adjusting logistic regression models to calculate odds ratios (ORs), which assessed the association between the primary outcomes and relevant exposures of interest, including: age, sex, ethnicity, parental socioeconomic status (SES), domiciliary status, category of medical school, Situational Judgement Test (SJT) scores at medical school, and success in postgraduate examinations. This study followed STROBE guidelines. Results. Compared to the overall cohort of CSTs, females were significantly less likely to apply to T&O (OR 0.37, 95% CI 0.30 to 0.46; n = 155/720 female vs n = 535/1,240 male; p < 0.001). CSTs who were not UK-domiciled prior to university were nearly twice as likely to apply to T&O (OR 1.99, 95% CI 1.39 to 2.85; n = 50/205 vs not UK-domiciled vs n = 585/1,580 UK-domiciled; p < 0.001). Age, ethnicity, SES, and medical school category were not associated with applying to T&O. Applicants who identified as ‘black and minority ethnic’ (BME) were significantly less likely to be offered a T&O ST3 post (OR 0.70, 95% CI 0.51 to 0.97; n = 165/265 BME vs n = 265/385 white; p = 0.034). Differences in age, sex, SES, medical school category, and SJT scores were not significantly associated with being offered a T&O ST3 post. Conclusion. There is an evident disparity in sex between T&O applicants and an ethnic disparity between those who receive offers on their first attempt. Further high-quality, prospective research in the post-COVID-19 pandemic period is needed to improve equality, diversity, and inclusion in T&O training. Cite this article: Bone Jt Open 2024;5(8):697–707

Introduction:. The robot-assisted cementless total hip arthroplasty has theoretical advantages of providing better fit and mechanical stability of the stem. However, no previous study has been reported on a short stem implantation using surgical robot. We compared early clinical and radiographic results between robotic milling and manual rasping in short stem total hip arthroplasty. Materials & Methods:. We designed a prospective randomized controlled trial to determine whether robot-assisted short stem total hip arthroplasty improves the implant position represented by stem alignment, leg length equality, and reduces the intraoperative and early postoperative complications. A total of 40 patients were enrolled with informed consents and randomly assigned to robotic milling group (20 hips) and manual rasping group (20 hips) by means of a computer-generated random number table. There were no statistically significant differences in the demographics of the patients between the two groups. Results:. Total operation time of the robotic milling group was significantly longer than that of the manual rasping group (p = 0.015) with average 8.8 minutes registration time and average 11.1 minutes milling time. There was no significantly difference in total blood loss between the two groups. The robotic milling group showed superior results on stem alignment and leg length equality compared with the manual rasping group. Only in the manual rasping group, there were 2 intraoperative femoral fractures. No complications such as infection, nerve palsy or dislocation encountered in both groups. Conclusions:. Robotic-assisted short stem total hip arthroplasty has advantages in increased accuracy of stem alignment and leg length equality, and also helps reduce the potential risk of intraoperative femoral fracture

Introduction. Historically, amputation or rotationplasty were the treatment of choice in skeletally immature patients. The introduction of expandable endoprostheses in the late 1980s offered the advantages of limb-salvage and limb length equality at skeletal maturity and a promising alternative with improved cosmetic results and immediate weight bearing. Objective. to describe the Rizzoli experience in reconstruction with three different types of expandable prostheses in growing children with malignant bone tumors of the femur, assess the outcome of limb salvage in these patients, analyze survival and complications related to these prostheses used over time. Materials and Methods. Between 1996 and 2010, 39 expandable implants were used in 32 children (16 boys and 16 girls; mean age, 9 years at initial surgery) with bone sarcomas of the femur treated with limb salvage using expandable prostheses. The most common diagnosis was osteoblastic osteosarcoma; all children were classified as having a stage IIB lesion and had preoperative and postoperative chemotherapy. The minimally invasive Kotz Growing prosthesis was used in 17 cases (10 primary implant and 7 revision after failure of non-invasive Repiphysis®), the non-invasive Repiphysis® in 15 cases and Stanmore® expandable prostheses in 7 cases. The mean follow-up was 48 months. Functional evaluation and survival analysis of the children and implants were performed. Results. The rate of implant-related complications was 51.3%; 9 prostheses (23%) were revised because of aseptic loosening, infection and breakage. The mean total lengthening was 26 mm (4 to 165 mm) achieved by 78 procedures (2.4 procedures/patient). Three of the nine children who reached skeletal maturity had limb length equality and six discrepancy of 15–30 mm. The survival of the children was 94% and 76% at 24 and 72 months. The survival of the primary prostheses was 90% and 70% at 24 and 72 months. Survival was significantly higher only for the Kotz compared to the Repiphysis® prostheses (p= 0.026). The mean MSTS score was excellent (79%) without a significant difference between the type of prostheses (p= 0.934). Conclusions. In the growing children expandable prostheses are viable reconstruction options with good and excellent oncological and functional outcome, and limb-length equality at skeletal maturity. Mechanical failures including aseptic loosening and breakage, dysfunction of the expansion mechanism, contractures especially around the knee, dislocation and infection were the most common; some designs have been associated with an unacceptably high inherent risk of complications. However, the non-invasive systems are associated with high complications and failure rates. Early experience is promising, but further study is warranted to determine long-term structural integrity of these newer designs

Introduction. There is no consensus on the ideal pain management strategy following total hip arthroplasty (THA). This study sought to identify immediate changes in the hospital course of patients undergoing primary THA following implementation of a rapid recovery anesthesia and multimodal management of pain (RAMP) protocol. For this study, rapid recovery anesthesia describes the use of preoperative non-narcotic medication in conjunction with neuraxial anesthesia techniques confined to the operating room only. The multimodal pain regimen consists of pre- and post-operative high dose nonsteroidal anti-inflammatories (NSAIDs), gabapentin, and antiemetics with or without intraoperative periarticular anesthetic injection. We hypothesized that the implementation of a RAMP protocol would lead to decreased reported pain scores, decreased narcotic use, and a shorter hospital stay in patients undergoing primary THA. Methods. This retrospective cohort study performed at a multi-surgeon high-volume institution reviewed the records of 81 consecutive patients who underwent primary THA utilizing traditional anesthesia and an opioid-dependentpain management techniques between June to September 2014 compared to 78 patients who underwent primary THA after implementation of the RAMP protocol between November 2014 to February 2015. The length of stay (LOS), pain scores, narcotic use, and other clinical data were recorded for each study group. Equality of variance was confirmed prior to statistical analysis using t-test for equality of means. Results. There was no significant difference in the demographics, body mass index, ASA classification, or Charleson Comorbidity Index between the two cohorts. The average LOS was significantly shorter after implementation of the RAMP protocol with a mean of 2.10 ± 1.1 days versus 2.89 ± 1.0 days. Total amount of narcotics used was significantly less with the RAMP protocol (Fig 1). Patient reported pain scores were improved throughout the hospital stay with patients receiving the RAMP protocol reporting significantly less pain beginning the morning of POD 1 (Fig 2). No significant decrease in kidney function was seen following the use of high dose NSAIDs (p=0.18). Conclusions. The implementation of a RAMP protocol in patients undergoing primary total hip arthroplasty has resulted in an immediate shorter length of stay with less narcotics use and improved reported pain scores. To our knowledge, this is the first study demonstrating a statistically significantly shorter length of stay associated with a multimodal pain protocol. This study supports the benefits of broad implementation a RAMP protocol for total hip arthroplasty

INTRODUCTION. Use of a novel ligament gap balancing instrumentation system in total knee arthroplasty (TKA) resulted in femoral component external rotation values which were higher on average, compared to measured bone resection systems. In one hundred twenty knees in 110 patients the external rotation averaged 6.9 degrees (± 2.8) and ranged from 0.6 to 12.8 degrees. The external rotation values in this study were 4° and 2° larger, respectively, than the typical 3° and 5° discrete values that are common to measured resection systems. The purpose of the present study was to determine the effect of these greater external rotation values for the femoral component on patellar tracking, flexion stability and function of two different TKA implant designs. METHODS. In the first arm of the study, 120 knees in 110 patients were consecutively enrolled by a single surgeon using the same implant design (single radius femur with a medial constraint tibial liner) across subjects. All patients underwent arthroplasty with tibial resection first and that set external rotation of the femoral component based upon use of a ligament gap balancing system. Following ligament tensioning / balancing, the femur was prepared. The accuracy of the ligament balancing system was assessed by reapplying equal tension to the ligaments using a tensioning bolt and torque wrench in flexion and extension after the bone resections had been made. The resulting flexion and extension gaps were then measured to determine rectangular shape and equality of the gaps. Postoperative Merchant views were obtained on all of the patients and patellar tracking was assessed and compared to 120 consecutive total knee arthroplasties previously performed by the same surgeon with the same implant using a measured resection system. In the second arm of the study, 100 unilateral knees in 100 patients were consecutively enrolled. The same instrumentation and technique by the same surgeon was used, but with a different implant design (single radius femur without a medial constraint tibial liner). RESULTS. Rectangular flexion and extension gaps were obtained within ± 0.5mm in all cases. Equality of the flexion and extension gaps was also obtained within ± 0.5mm in all cases. Merchant views of the total knee arthroplasties showed central patellar tracking with no tilt or subluxation in 90% of the ligament gap balanced knees and 74% of the measured resection knees. Arthrofibrosis resulting in a closed manipulation under anesthesia was required in 6% of the knees with single radius femurs and medial constaint tibial liners, but only in 1% of the single radius femur knees without medial constraint liners. DISCUSSION AND CONCLUSION. External rotation values are higher on average, when ligament tensioning / balancing is employed with this novel system compared to measured resection systems. In this study this resulted in consistent matching of the flexion gap to the extension gap and better patellar tracking. These findings suggest that limiting the surgeon to discrete rotation values may be at odds with where the femur “desires” to be, given soft tissue considerations for each patient. Also, even with ideal soft tissue balancing, TKA implant design can have a significant affect on the outcome measure of development of arthrofibrosis

Introduction. Paediatric tibial fractures, unlike femoral fractures do not have much potential for overgrowth. In simple factures of the tibial shaft treated non-operatively the major problems are shortening and malunion. In complex injuries with extensive soft tissue disruption and bone loss, the long-term aim of reconstruction is to achieve union with a fully functional limb without limb-length inequality. Methods. Four children (Age range 6-12 years) who sustained high-energy grade III open fractures of the tibia were treated with acute shortening and bone transport. Any soft tissue reconstructive and secondary grafting procedures for delayed union were recorded. The children were prospectively followed up to fracture union. Distraction ostegenesis proceeded until limb length equality was achieved and the regenerate allowed to consolidate. Results. Three children had grade 3B injuries, 2 requiring flap reconstruction. One had a grade 3A injury. Mean acute shortening was 4.4cm (Range 2-9cm). Distraction osteogenesis was used to achieve limb-length equalisation. 2 children required secondary bone graft procedures to achieve union. At 3 years from injury, all children had overgrowth of the injured leg averaging 2cm. Discussion. Despite achieving equal limb lengths at the end of distraction osteogenesis the injured tibia overgrew by a mean of 2cm at three years post injury. This would suggest that even in the presence of extensive soft tissue trauma, as seen in these high energy injuries, the increased blood flow associated with metaphyseal corticotomy stimulates epiphyseal activity resulting in overgrowth. The value of stopping adjustments just short of achieving limb length equality to allow for expected overgrowth in the injured tibia merits further investigation

INTRODUCTION. Use of a novel ligament gap balancing instrumentation system in total knee arthroplasty resulted in femoral component external rotation values which were higher on average, compared to measured resection systems. In one hundred twenty knees in 110 patients the external rotation averaged 6.9 degrees (+/− 2.8) and ranged from 0.6 to 12.8 degrees. The external rotation values in this study were 4° and 2° larger, respectively, than the typical 3° and 5° discrete values that are common to measured resection systems. The purpose of the present study was to determine the effect of these greater external rotation values for the femoral component on patellar tracking and flexion instability. METHODS. One hundred twenty knees in 110 patients were consecutively enrolled by a single surgeon using the same implant across subjects. All patients underwent arthroplasty with tibial resection first and that set external rotation of the femoral component based upon use of a ligament gap balancing system. Following ligament tensioning/balancing, the femur was prepared. The accuracy of the ligament balancing system was assessed by reapplying equal tension to the ligaments using a tensioning bolt and torque wrench in flexion and extension after the bone resections had been made. The resulting flexion and extension gaps were then measured to determine rectangular shape and equality of the gaps. Postoperative Merchant views were obtained on all of the patients and patellar tracking was assessed and compared to 120 consecutive total knee arthroplasties previously performed by the same surgeon with the same implant using a measured resection system. RESULTS. Rectangular flexion and extension gaps were obtained within +/− 0.5mm in all cases. Equality of the flexion and extension gaps was also obtained within +/− 0.5mm in all cases. Merchant views of the total knee arthroplasties showed central patellar tracking with no tilt or subluxation in 90% of the ligament gap balanced knees and 74% of the measured resection knees. DISCUSSION AND CONCLUSION. External rotation values are higher on average, when ligament tensioning/balancing is employed with this novel system compared to measured resection systems. In this study this resulted in consistent matching of the flexion gap to the extension gap and better patellar tracking. These findings suggest that limiting the surgeon to discrete rotation values may be at odds with where the femur “desires” to be, given soft tissue considerations for each patient

The technique involves inserting the femoral and acetabular components anterior to the posterior capsule and short rotators and posterior to the gluteus medius and minimus through an incision in the superior capsule. The surgery is performed with the femoral component instrumented before femoral neck osteotomy and head removal. The femur remains steady during the femoral instrumentation. Leverage retractors around the neck are easy to hold and to maintain exposure. The integrity of the capsule is used to assess length and offset. During the procedure the hip is never disarticulated, and the leg is never placed outside of the range of motion envelope of the normal hip. The technique has found astonishingly few users over the past ten years. Many surgeons are not aware of this technique and clinical results are scarce. The purpose of this paper is recall it to memory, to compare it with other less invasive procedures, and to report on some remarkable clinical results including stability, leg length and offset equality, component positioning, muscle force generation and complications

There is enough evidence to show that navigation improves precision of component placement and consistent and accurate restoration of limb alignment, allowing the surgeon to achieve the desired neutral or kinematic alignment. Computer-assisted TKA provides excellent information regarding gap equality and symmetry throughout the knee range of motion. Accurate soft-tissue balancing is facilitated by CAS. It allows precise, quantitative soft tissue release for deformities, especially in knees with severe flexion contractures and severe rigid varus and valgus deformities. It allows accurate restoration of joint line, and posterior femoral offset. Knee arthritis with complex extra-articular deformities and in-situ hardware can be tackled appropriately using computer navigation where conventional techniques may be inadequate. It also allows intra-articular correction for extra-articular deformities due to malunions and facilitates extra-articular correction in cases with severe extra-articular tibial deformities. In obese patients, where the alignment of the limb is difficult to assess, computer navigation improves accuracy and reduces the number of outliers. The ability to quantify the precise amount of bone cuts and soft tissue releases needed to equalise gaps and restore alignment, reduced blood loss, and reduced incidence of systemic emboli improves the safety of the procedure and hastens functional recovery of the patient. Recent evidence shows that the rate of revision especially in younger patients is reduced with navigation

Background. Humeral retroversion is variable among individuals, and there are several measurement methods. This study was conducted to compare the concordance and reliability between the standard method and 5 other measurement methods on Twodimensional (2D) computed tomography (CT) scans. Methods. CT scans from 21 patients who underwent shoulder arthroplasty (19 women and 2 men; mean age, 70.1 years [range, 42 to 81 years]) were analyzed. The elbow transepicondylar axis was used as a distal reference. Proximal reference points included the central humeral head axis (standard method), the axis of the humeral center to 9 mm posterior to the posterior margin of the bicipital groove (method 1), the central axis of the bicipital groove –30° (method 2), the base axis of the triangular shaped metaphysis +2.5° (method 3), the distal humeral head central axis +2.4° (method 4), and contralateral humeral head retroversion (method 5). Measurements were conducted independently by two orthopedic surgeons. Results. The mean humeral retroversion was 31.42° ± 12.10° using the standard method, and 29.70° ± 11.66° (method 1), 30.64°± 11.24° (method 2), 30.41° ± 11.17° (method 3), 32.14° ± 11.70° (method 4), and 34.15° ± 11.47° (method 5) for the other methods. Interobserver reliability and intraobserver reliability exceeded 0.75 for all methods. On the test to evaluate the equality of the standard method to the other methods, the intraclass correlation coefficients (ICCs) of method 2 and method 4 were different from the ICC of the standard method in surgeon A (p < 0.05), and the ICCs of method 2 and method 3 were different form the ICC of the standard method in surgeon B (p < 0.05). Conclusions. Humeral version measurement using the posterior margin of the bicipital groove (method 1) would be most concordant with the standard method even though all 5 methods showed excellent agreements

Aims

Our primary aim was to establish the proportion of female orthopaedic consultants who perform arthroplasty via cases submitted to the National Joint Registry (NJR), which covers England, Wales, Northern Ireland, the Isle of Man, and Guernsey. Secondary aims included comparing time since specialist registration, private practice participation, and number of hospitals worked in between male and female surgeons.

Aims

Weightbearing instructions after musculoskeletal injury or orthopaedic surgery are a key aspect of the rehabilitation pathway and prescription. The terminology used to describe the weightbearing status of the patient is variable; many different terms are used, and there is recognition and evidence that the lack of standardized terminology contributes to confusion in practice.

There are many different approaches to achieving balancing in total knee surgery. The most frequently used method is to obtain correctly aligned bone cuts, and then carry out necessary soft tissue releases to achieve equal flexion and extension gaps. In some techniques, the bone cuts themselves are determined by the prevailing soft tissue status or the kinematics during flexion-extension. Navigation can provide quantitative data during these processes but so far, navigation is used in only in a minority of cases. However in recent years, new technologies have been introduced with lower cost and implementation time, allowing for more widespread use. Early studies have indicated that more reproducible balancing can be obtained, and that balancing has a positive effect on clinical outcomes. However the ability to measure balancing quantitatively during surgery, has raised the questions of the most systematic method for implementation during surgery, and the relative influence of various correcting factors. Further, the ideal balancing parameters with respect to varus-valgus ratios and the magnitudes during a full flexion range, have yet to be defined. Even if normative data is the target, there is scant data on this topic. In our own laboratory, we carried out experiments on knee specimens where the various surgical variables were systematically investigated for their effect on varus-valgus balancing. Different tests were developed including the ‘Heel Push Test’ where lateral and medial contact forces were plotted as a function of flexion. Imbalances were achieved with either bone cut adjustments or soft tissue releases. The major finding was that adjustments of only 2 mms or 2 degrees could correct most imbalances. This was considered to be due to two effects; the pretension in the ligaments bringing the structure to the stiff part of the load-elongation curve, and the high values of the stiffness itself. Medial-lateral equality was the goal in this work, but recognizing that this may not be the situation in the normal knee. To answer this question, we developed a method for measuring the varus-valgus balancing in normal subjects, using a ‘Smart Knee Fixture’ with embedded stretch sensors. We validated this device using cadaveric specimens, and normal volunteers using fluoroscopy and electromyography. We are now applying the method in an IRB study to both normals and post-operative knee replacement cases. For the latter, the relation between operative data, and post-operative balancing will be studied, as well as the relation of balancing to functional outcomes. This overall subject of balancing at surgery, and the post-operative effects, is open to extensive experimental research, and is predicted to result in improved outcomes

The approach to total hip arthroplasty (THA) should allow adequate visualization and access so as to implant in optimal position whilst minimizing muscle injury, maintaining or restoring normal soft tissue anatomy and biomechanics and encouraging a rapid recovery with minimal complications. Every surgeon who performs primary hip arthroplasties will expound the particular virtues of his or her particular routine surgical approach. Usually this approach will be the one to which the surgeon was most widely exposed to during residency training. There is a strong drive from patients, industry, surgeon marketing campaigns, and the media to perform THA through smaller incisions with quicker recoveries. The perceived advantage of the anterior approach is the lack of disturbance of the soft tissues surrounding the hip joint, less pain, faster recovery with the potential for earlier return to work, shorter hospital stay and improved cosmetic results. The potential disadvantages include less visibility, longer operation time, nerve injuries, femoral fractures, malposition and a long learning curve for the surgeon (and his / her patients). The anterior approach was first performed in Paris, by Robert Judet in 1947. The advantages of the anterior approach for THA are several. First, the hip is an anterior joint, closer to the skin anterior than posterior. Second, the approach follows the anatomic interval between the zones of innervation of the superior and inferior gluteal nerves lateral and the femoral nerve medial. Third, the approach exposes the hip without detachment of muscle from the bone. The mini-incision variation of this exposure was developed by Joel Matta in 1996. He rethought his approach to THA and his goals were: lower risk of dislocation, enhanced recovery, and increased accuracy of hip prosthesis placement and leg length equality. This approach preserves posterior structures that are important for preventing dislocation while preserving important muscle attachments to the greater trochanter. The lack of disturbance of the gluteus minimus and gluteus medius insertions facilitates gait recovery and rehabilitation, while the posterior rotators and capsule provide active and passive stability and account for immediate stability of the hip and a low risk of dislocation. A disadvantage of the approach is the fact that a special operating table with traction is required. Potential complications include intraoperative femoral and ankle fractures. These can be avoided through careful manipulation of the limb. If a femoral fracture occurs, the incision can be extended distally by lengthening the skin incision downward along the anterolateral aspect of the thigh, and splitting the interval between the rectus femoris and the vastus lateralis. The choice of approach used to perform a primary THA remains controversial. The primary goals are pain relief, functional recovery and implant longevity performed with a safe and reproducible approach without complications. The anterior approach is promising in terms of hospital stay and functional recovery. Although recent studies suggest that component placement in minimally invasive surgery is safe and reliable, no long-term results have been published. Further follow-up and development is necessary to compare the results with the posterior approach as most of the positive data is based on comparisons with the anterolateral approach. The proposed benefits of the anterior approach are not supported by the current available literature. The issues regarding the difficult learning curve, rate of complications, operative time, requirement for trauma tables and image intensifier should be taken into account by surgeons starting with the anterior approach in THA

The approach to total hip arthroplasty (THA) should allow adequate visualization and access so as to implant in optimal position whilst minimizing muscle injury, maintaining or restoring normal soft tissue anatomy and biomechanics and encouraging a rapid recovery with minimal complications. The direct anterior approach (DAA) for THA was first performed in Paris, by Robert Judet in 1947. This procedure has since been performed consistently by a small group of surgeons and has recently gained great popularity. Access to the hip can be safely performed with one or two assistants. The advantages of the anterior approach for hip arthroplasty are several. First, the hip is an anterior joint, closer to the skin anterior than posterior. Second, the approach follows the anatomic interval between the zones of innervation of the superior and inferior gluteal nerves lateral and the femoral nerve medial. Third, the approach exposes the hip without detachment of muscle from the bone. Care must be taken to avoid cutting the lateral femoral cutaneous nerve which runs over the fascia of the sartorius. The mini-incision variation of this exposure was developed by Joel Matta in 1996. He rethought his approach to hip arthroplasty and by abandoning the posterior approach and adopting the anterior approach his goals were: lower risk of dislocation, enhanced recovery, and increased accuracy of hip prosthesis placement and leg length equality. This approach preserves posterior structures that are important for preventing dislocation while preserving important muscle attachments to the greater trochanter. The lack of disturbance of the gluteus minimus and gluteus medius insertions facilitates gait recovery and rehabilitation while the posterior rotators and capsule provides active and passive stability and accounts for immediate stability of the hip and a low risk of dislocation. Using the anterior approach, patients are allowed to mobilise their hip freely. The gluteus maximus and tensor fascia latae muscles insert on the iliotibial band which joins them and form a ´hip deltoid´. Lack of disturbance of these abductors and pelvic stabilisers is another benefit of the anterior approach and accelerates gait recovery. The lateral femoral cutaneous nerve is at risk when the fascia is incised between the tensor fascia latae and the sartorius muscle. Damaging it may lead to a diminished sensation on the lateral aspect of the thigh and formation of a neuroma. A disadvantage of the approach is the fact that a special operating table with traction is required. Potential complications include intra-operative femoral and ankle fractures. These can be avoided through careful manipulation of the limb. If a femoral fracture occurs, the incision can be extended distally along the anterolateral aspect of the thigh, and splitting the interval between the rectus femoris and the vastus lateralis. In obese or muscular patients, where visibility is in doubt, an increase of the incision length will give the surgeon the required view. The choice of approach used to perform a primary THA remains controversial. The primary goal of a hip replacement is pain relief, functional recovery and implant longevity performed with a safe and reproducible approach without complications. The anterior approach is promising in terms of hospital stay and functional recovery. Although recent studies suggest that component placement in minimally invasive surgery is safe and reliable, no long-term results have been published. Further follow-up and development is necessary to compare the results with the posterior approach. The proposed benefits of with the DAA are not supported by the current available literature. The issues regarding the difficult learning curve, rate of complications, operative time, requirement for trauma tables and image intensifier should be taken into account by surgeons starting with the DAA in THA

Non-invasive expandable prostheses for limb salvage tumour surgery were first used in 2002. These implants allow ongoing lengthening of the operated limb to maintain limb-length equality and function while avoiding unnecessary repeat surgeries and the phenomenon of anniversary operations. A large series of skeletally immature patients have been treated with these implants at the two leading orthopaedic oncology centres in England (Royal National Orthopaedic Hospital, Stanmore, and Royal Orthopaedic Hospital, Birmingham). An up to date review of these patients has been made, documenting the relevant diagnoses, sites of tumour and types of implant used. 87 patients were assessed, with an age range of 5 to 17 years and follow up range of up to 88 months. Primary diagnosis was osteosarcoma, followed by Ewing's sarcoma. We implanted distal femoral, proximal femoral, total femoral and proximal tibial prostheses. All implants involving the knee joint used a rotating hinge knee. 6 implants reached maximum length and were revised. 8 implants had issues with lengthening but only 4 of these were identified as being due to failure of the lengthening mechanism and were revised successfully. Deep infection was limited to 5% of patients. Overall satisfaction was high with the patients avoiding operative lengthening and tolerating the non-invasive lengthenings well. Combined with satisfactory survivorship and functional outcome, we commend its use in the immature population of long bone tumour cases

Background. Leg length discrepancy real or perceived remains an important source of patient dissatisfaction after a total hip replacement. Pre-operative templating and intra-operative measurement has to be used to ensure an accurate restoration of the normal centre of rotation of the hip as well as equal leg lengths. Theoretically more bone has to be resected from the femur to maintain the centre of the femoral head in the same location. This is due to a smaller size of the prosthetic femoral head compared to the native femoral head. It was postulated that this was an accurate predictor of leg length after a total hip replacement. Methods. 56 consecutive patients who underwent a total hip replacement (cemented, uncemented or hybrid) had intra-operative measurements documented of their femoral head-neck resection distance. This was compared with the measurement of the femoral prosthesis that was inserted. A telephonic survey of the patients perceived leg equality as well as a radiological measurement of their actual leg lengths on a standing AP X-ray at 6 weeks post-operatively was done. Results. Forty eight of the 56 patients (85%) reported subjectively equal leg lengths. Eight patients reported unequal leg lengths, 5 longer and 3 shorter. Of the 5 cases that reported longer leg lengths 4 had more prosthesis inserted than bone resected. The 3 shorter reported legs also had more prosthesis inserted than bone resected in 2 cases. Of the 8 patients who reported unequal leg lengths only 3 were unequal on X-ray measurement (2 longer and 1 shorter). There was good correlation between the amount of bone resected versus prosthesis inserted and the patient's subjective evaluation of leg length discrepancy, but poor correlation between subjective leg length discrepancy and objective radiological evaluation. NO DISCLOSURES

Fibular Hemimelia is not just a fibular anomaly but there is entire limb involvement with varied expression in each segment. Factors which we have considered in treatment are the amount of fibula present, percentage of shortening, tibial and leg deformity and foot deformity. Residual or recurrent foot deformity is the prime reason for unsatisfactory results, so we have used Paley's classification which takes into consideration foot deformity. Our series is of 29 cases, Paley type I-7, Type II-6, Type III-16 and none of type IV. Tibial lengthening (+/−) bow correction was performed in 28 cases. Supramalleolar osteotomy was done in 4 cases. In foot, soft tissue release only was done in 6 cases and soft tissue release with osteotomy (subtalar or calcaneal) was done in 14 cases. Amputation was done in 2 cases. Age ranged from 11 months to 16 years. Mean follow up was 4.2 years. Mean lengthening was 3.5 cm. Desires lengthening was achieved in 21/29 cases and plantigrade foot was achieved in 16/29 cases. Complications faced were recurrence of foot deformity, knee valgus, knee fixed flexion deformity, knee subluxation and pin tract problems. Less than 3 rays and more than 25 cm of limb length discrepancy were poor prognostic factors. We had 7 excellent, 16 good and 6 poor results. To conclude, it is difficult to achieve the aim of plantigrade foot and limb length equality in all cases but radical surgery with foot correction and tibial lengthening can give good results