Success treating AIS with bracing is related to time worn and scoliosis severity. Temperature monitoring can help patients comply with their orthotic prescription. Routinely collected temperature data from the start of first brace treatment was reviewed for 14 patients. All were female with an average age of 12.4 years (range 10.3–14.6) and average 49o Cobb angle (30–64). Our current service recommendation is brace wear for 20 hours a day. Patients complied with this prescription 38.0% of the time, with four patients averaging this or more. Average brace wear was 16.3 hours per day (3.5–22.2). There were 13 patients who had completed brace treatment. The majority had surgery (7/13; 54%) or were considering surgery (1/13; 8%). There were 5 who did not wish surgery at discharge (5/13; 38%); 1 achieved a 40o Cobb angle, with 4 larger (53o;53o;54o;68o). The Bracing in AIS Trial (BrAIST) study measured “success” as less than a 50o Cobb angle, so using this metric our cohort has had a single “success”. Temperature monitors allowed an analysis of when patients were achieving their brace wear. When comparing daywear (8am-8pm) to nightwear (8pm-8am), patients wore their brace an average of 7.6 hours a day (2.5–11.2) and 8.7 hours a night (0.4–11.5). We conclude the minority of our patients comply with our current 20 hour orthotic prescription. The “success” of brace treatment is lower than comparison studies despite higher average compliance but starting with a larger scoliosis. Brace wear is achieved during both the day and night

Acetabular fractures present a challenge. Anatomical reduction can be achieved by open reduction and internal fixation (ORIF). However, in elderly patients with complex fracture patterns and osteoporotic bone stock, “fix and replace” has become an option in the management of these injuries. This involves ORIF of the acetabulum to enable insertion of a press fit cup and subsequent cemented femoral stem at the index surgery.

A Retrospective analysis of all operatively managed acetabular fractures by a regional Pelvic and Acetabular Trauma service (01/01/2018-30/05/2023) STATA used for analysis. 34 patients undergoing “fix and replace” surgery. Of the 133 patients managed with ORIF, 21 subsequently required Total Hip Arthroplasty (THA). Mean follow up was 2.7 years versus 5.1. There was no statistical significance between the two groups with regards to BMI or sex. Mean age in the “fix and replace” group was 68 compared to 48 in the ORIF and subsequent THA group. This reached statistical significance between the two groups (p=0.001).ASA and Charlson Comorbidity Index (3 and 3 in “fix and replace” and 2 and 1.2 in ORIF to THA group) and Charlson Comorbidity Index both were statistically significantly different (p=0.006 and p=0.027, respectively). High energy mechanism of injury accounted for 56% of the “fix and replace” group compared to 48% in the ORIF to THA. 74% of “fix and replace” were associated fractures compared to 53% of ORIF to THA. Wait to surgery was 3 days for “fix and replace” while 186 days was the mean wait time from listing to THA for the ORIF to THA group. Complication rate was 41% versus 43% in the two groups. 14% in the ORIF to THA group developed PJI versus 6% in “fix and replace”.

Fix and replace allows early mobilisation in frailer, elderly patients. Our results show fewer returns to theatre and less PJI in patients having arthroplasty as part of “fix and replace” than subsequent to Open reduction internal fixation.

Aim. To investigate the biomechanical behaviours of the TL-Hex & Taylor Spatial Frame (TSF) Hexapod external fixators, with comparison to traditional ring-fixator constructs. Methods. Standardised four-ring TL-Hex and TSF constructs, as well as matched ilizarov threaded-rod constructs for each set of components, were tested alone and mounted with an acrylic bone model with simulated fracture gap using fine-wires. Load-deformation properties for each construct and mode of loading were calculated and analysed statistically using ANOVA. Results and Conclusions. Under axial loading the Ilizarov construct utilising TL-Hex components demonstrated greatest rigidity followed by the TL-Hex Ilizarov using TSF components (p<0.01). Under torsional loading both hexapod frames were seen to be significantly more rigid than the Ilizarov (p<0.01), with the TSF demonstrating greater rigidity than the TL-Hex. Under cantilever bending loads the difference in rigidity seen across all constructs was less marked. When loaded with the bone model both hexapods demonstrated reduced axial rigidity as compared to Ilizarov constructs, but without any appreciable difference in translational shear strain. Under cantilever bending the Ilizarov construct using TL-Hex components p<0.01) demonstrated less translational shear strain than the TSF and TSF using Ilizarov components. In conclusion, both hexapod designs were less rigid axially, but more so under bending and torsional loads, than their Ilizarov construct counterparts, producing greater overall planar shear strain, largely due to the observed “toe-in” laxity. Overall, the TL-Hex was seen to be more rigid that the TSF under bending loads although the difference in shear strain at the fracture site was not significantly different

This study compares outcomes of fixation of subtrochanteric femoral fractures using a single lag screw (Gamma3 nail, GN) with a dual lag screw device (InterTAN nail, IN). The primary outcome was mechanical failure, defined as lag screw cut-out, back-out, nail breakage or peri-implant fracture. Technical factors associated with mechanical failure were also identified.

All adult patients (>18yrs) with a subtrochanteric femoral fracture treated in a single centre were retrospectively identified using electronic records. Included patients underwent surgical fixation using either a long GN (2010–2017) or IN (2017–2022). Cox regression analysis was used to determine the risk of mechanical failure and technical predictors of failure.

The study included 587 patients, 336 in the GN group (median age 82yrs, 73% female) and 251 in the IN group (median age 82yrs, 71% female). The IN group exhibited a higher prevalence of osteoporosis (p=0.002) and CKD□3 (p=0.007). There were no other baseline differences between groups. The risk of any mechanical failure was increased two-fold in the GN group (HR 2.51, p=0.020). Mechanical failure comprising screw cut-out (p=0.040), back-out (p=0.040) and nail breakage (p=0.51) was only observed in the GN group. The risk of peri-implant fracture was similar between the groups (HR 1.10, p=0.84). Technical predictors of mechanical included varus >5° for cut-out (HR 15.61, p=0.016), TAD>25mm for back-out (HR 9.41, p=0.020) and shortening >1cm for peri-implant fracture (HR 6.50, p=<0.001).

Dual lag screw designs may reduce the risk of mechanical complications for patients with subtrochanteric femoral fractures.

Accurate evaluation of lower limb coronal alignment is essential for effective pre-operative planning of knee arthroplasty. Weightbearing hip-knee-ankle (HKA) radiographs are considered the gold standard. Mako SmartRobotics uses CT-based navigation to provide intra-operative data on lower limb coronal alignment during robotic assisted knee arthroplasty. This study aimed to compare the correlation between the two methods in assessing coronal plane alignment.

Patients undergoing Mako partial (PKA) or total knee arthroplasty (TKA) were identified from our hospital database. The hospital PACS system was used to measure pre-operative coronal plane alignment on HKA radiographs. This data was correlated to the intraoperative deformity assessment during Mako PKA and TKA surgery.

443 consecutive Mako knee arthroplasties were performed between November 2019 and December 2021. Weightbearing HKA radiographs were done in 56% of cases. Data for intraoperative coronal plane alignment was available for 414 patients. 378 knees were aligned in varus, and 36 in valgus. Mean varus deformity was 7.46° (SD 3.89) on HKA vs 7.13° (SD 3.56) on Mako intraoperative assessment, with a moderate correlation (R= 0.50, p<0.0001). Intraoperative varus deformity of 0-4° correlated to HKA measured varus (within 3°) in 60% of cases, compared to 28% for 5-9°, 17% for 10-14°, and in no cases with >15° deformity. Mean valgus deformity was 6.44° (SD 4.68) on HKA vs 4.75° (SD 3.79) for Mako, with poor correlation (R=0.18, p=0.38).

In this series, the correlation between weightbearing HKA radiographs and intraoperative alignment assessment using Mako SmartRobotics appears to be poor, with greater deformities having poorer correlation.

Aims

The aim of this study was to explore current use of the Global Fragility Fracture Network (FFN) Minimum Common Dataset (MCD) within established national hip fracture registries, and to propose a revised MCD to enable international benchmarking for hip fracture care.

Aims

Following cast removal for nonoperatively treated distal radius fractures, rehabilitation facilitated by advice leaflet and advice video were compared to a course of face-to-face therapy.

Introduction. Many surgeons assess biological activity of fracture nonunion by the presence or absence of callus using radiograph. However, it is difficult to assess biological activity only by radiographic appearance. Bone scintigraphy reflects blood supply and bone metabolism and is possibly useful to assess biological activity in nonunion cases. Hypothesis. We hypothesized that poor callus visualization did not always mean lack of biological activity. Materials & Methods. Retrospective assessment and comparison of radiographs and Tc-99m bone scintigraphy of 44 patients with uninfected nonunion was done. Results. Uptake was observed at or around the nonunion site in all cases. Three patterns of uptake were noted; Spot type (S): intense uniform uptake, Uneven type (U): uptake with distribution from cold to hot, and Cleft type (C): decreased uptake surrounded by significant uptake on both sides. All 9 cases of hypertrophic nonunion demonstrated the S type. In 21 cases of oligotrophic nonunion, there were 12 S, 5 U and 4 C. In 3 cases of comminuted nonunion, there were 1 U and 2 C. In 5 cases of defect nonunion, there were 1 U and 4 C. In 6 cases of atrophic nonunion, there were 2 U and 4 C. Discussion & Conclusions. Our results suggest that poor callus visualization does not always mean lack of biological activity. The distribution of uptake and the cleft with decreased uptake are helpful findings to assess the necessity of bone graft or other supplementation in nonunion surgery

Osteolysis induced by UHMWPE debris has historically been one of the major causes of long term failure of TJR. An increase in concentration of polyethylene particles in the peri-prostheic tissue has been linked to an increased incidence of osteolysis. The dual mobility hip bearing concept mates a femoral head into a polyethylene liner which has an unconstrained articulation into a metal shell. The wear mechanism of the dual mobility hip bearing is distinct from a constrained single articulation design, which may result in a difference in wear debris particles. The aim of this study is to evaluate wear debris generated from a dual mobility hip and compare it to a conventional single articulation design when both are manufactured from sequentially crosslinked and annealed polyethylene. The dual mobility hip (Restoration ADM) incorporated a 28mm CoCr femoral head into a polyethylene liner that articulates against a metal shell (48mm ID). The conventional hip (Trident®) mated a 28mm CoCr femoral head against a polyethylene liner. The polyethylene for all liners was sequentially crosslinked and annealed (X3). A hip joint simulator was used for testing at a rate of 1 Hz with cyclic Paul curve physiologic loading. A serum sample from each testing group was collected. Serum samples were protein digested following the published process by Scott et al. The digested serum was then filtered through a series of polycarbonate filter papers of decreasing size and sputter coated with gold for analysis using SEM. Image fields were randomized and wear debris was compared in terms of its length, width, aspect ration, and equivalent circular diameter (ECD). A total of 149 conventional hip particles and 114 dual mobility hip particles were imaged. Results show a majority of particles are of spherical nature and images do not indicate the presence of fibrillar or larger elongated polyethylene debris. Particle length between designs is not statistically different, while all other comparisons show statistical significance (p<0.05). It is hypothesized that the dual mobility hip system reduces the total amount of cross-shear motion on any one articulation, which aids in the reduction in wear. This design feature may be responsible for the slight difference in morphology of dual mobility wear debris when compared to the constrained hip design. The length of the particles was similar, simply indicating a different shape rather than a marked reduction in overall size. The debris generated is this study was from highly crosslinked polyethylene in two different designs, which produced a very significant decrease in quantity of particles when compared to the quantity of debris from conventional polyethylene. The wear debris was of similar length in both designs and so we do not expect any difference in biological response to debris from either device. The dual mobility design has also shown no effect of cup abduction angle on wear demonstrating forgiveness to implant positioning. This advantage, combined with the low wear rate and similar length wear particles, should lead to good clinical performance of dual mobility cups with sequentially irradiated and annealed polyethylene

National guidelines encourage the use of total hip arthroplasty (THA) to treat intracapsular neck of femur fractures. There have been no population based studies appraising the surgical outcomes for this indication across an entire population. This study aims to calculate the complication rates for THA when performed for a fractured neck of femur and compare them to THA performed for primary osteoarthritis in the same population.

The Scottish Arthroplasty Project identified all THAs performed in Scotland for neck of femur fracture and osteoarthritis between 1st of January 2009 and 31st December 2014. Dislocation, periprosthetic infection and revision rates at 1 year were calculated.

The rate of dislocation, periprosthetic infection and revision at 1 year were all significantly increased among the fracture neck of femur cohort. In total 44046 THAs were performed, 38316 for OA and 2715 for a neck of femur fracture. 2.1% of patients (n=57) who underwent a THA for a neck of femur fracture suffered a dislocation in the 1st year postoperatively, compared to 0.9% (n=337) when the THA was performed for osteoarthritis. Relative Risk of dislocation: 2.4 (95% C.I. 1.8077–3.1252, p value <0.0001). Relative Risk of infection: 1.5 (95% C.I. 1.0496–2.0200, p value 0.0245) Relative Risk of revision: 1.5 (95% C.I. 1.0308–2.1268, p value 0.0336).

This is the first time a dislocation rate for THA performed for a neck of femur fracture has been calculated for an entire population. As the number of THAs for neck of femur fracture increases this dislocation rate will have clinical implications.

Introduction. Wound surveillance has been reported to result in a significant fall in the incidence of wound sepsis in total knee arthroplasty (TKA). However, there is currently little guidance on the definition of surgical wound infection that is best to be used for surveillance. The purpose of this study was to assess the agreement between three common definitions of surgical wound infection as a performance indicator in TKA; (a) the CDC 1992 definition, (b) the NINSS modification of the CDC definition and (c) the ASEPSIS scoring method applied to the same series of surgical wounds. Methods. A prospective study of 500 surgical wounds in patients who underwent knee arthroplasties between May 2002 and December 2004 from a single tertiary centre were assessed according to the different definitions of surgical wound infection. Results. A total of 500 wounds were assessed in 482 patients. Mean age of patients was 70+/−11 years, 61.6% were females, duration of surgery was 101+/−49 minutes and mean follow-up was 35.2+/−25.7 months. The most commonly isolated species were Coagulase negative staphylococci (33.3%), Staphylococcus aureus (25%) and Pseudomonas aeruginosa (16.6%). The mean percentage of wounds classified as infected differed substantially with different definitions: 5.8% with the CDC definition, 3.6% with the NINSS version and 2.2% with an ASEPSIS score > 20. When superficial infections (according to CDC category) were included, 5.2% (26) of all observed wounds received conflicting diagnoses, and 1.4% (7) were classified as infected by both ASEPSIS and CDC definitions. When superficial infections were excluded, the two definitions estimated about the same overall percentage infection (2.2% and 2.6% respectively), but there were almost three times as many conflicting infection diagnoses (n=14) as concordant ones (n=5). Conclusion. Distinctions in surgical wound infection definitions contribute to notable differences in how infections are classified after TKA. Even small changes made to the CDC definition, as with the NINSS version, caused major variation in estimated percentage of wound infection. A single definition used consistently can show changes in wound infection rates over time at a single centre. However, differences in interpretation prevent comparison between different centres

Introduction. Currently, a validate scale of ankle osteoarthritis (OA) is not available and different classifications have been used, making comparisons between studies difficult. In other joints as the hip and knee, the Kellgren-Lawrence (K&L) scale, chosen as reference by the World Health Organizations is widely used to characterize OA. It consists of a physician based assessment of 3 radiological features: osteophyte formation, joint space narrowing and bone end sclerosis described as follows: grade 0: normal joint; grade 1: minute osteophytes of doubtfull significance; grade 2: definite osteophytes; grade 3: moderate diminution of joint space; grade 4: joint space greatly impaired, subchondral sclerosis. Until now, the K&L scale has never been validated in the ankle. Our objective was to assess the usefulness of the K&L scale for the ankle joint, by determining its reliability and by comparing it to functional scores and to computerized minimal joint space width (minJSW) and sclerosis measurements. Additionally we propose an atlas of standardized radiographs for each of the K&L grades in the ankle. Methods. 73 patients 10 to 20 years post ankle ORIF were examined. Bilateral ankle radiographs were taken. Four physicians independently assessed the K&L grades and evaluated tibial and talar sclerosis on anteroposterior radiographs. Functional outcome was assessed with the AOFAS Hindfoot score. Bone density and minJSW were measured using a previously validated Ankle Image Digital Analysis software (AIDA). Results. The interobserver reliability, for the K&L stages was 0.60 (intraclass correlation coefficient) indicating moderate to good agreement. The mean AOFAS hindfoot score decreased substantially (p = 009) and linearly from 99.3 in K&L grade 0 to 79.5 points in K&L grade 4. The minJSW assessed by AIDA was similar among grades 0 to 2 (between 2 and 2.5mm), but significantly lower in grade 3 (1.8mm) and in grade 4 (1.1mm). A decreased minJSW less than 2mm, commonly used as a threshold for the assessment of hip and knee OA, was found in 77% of K&L grades 3–4 compared to 33% of grades 0–2, sensitivity 77.4% and specificity 66.7%. Physician based assessment revealed that subchondral sclerosis was present in 16% of K&L grade 1 patients, 52% of grade 2, 70% of grade 3 and 100% of grade 4 patients. No correlation could be found between physician based assessment and digital image analysis of subchondral sclerosis. Conclusions. Interobserver reliability in assessment of ankle OA using the K&L scale was similar to other previously described joints. OA progression correlated with functional diminution. Joint space narrowing assessed AIDA as well as the cut-off of 2mm correlated well with the K&L scale. Overall, we recommend the use of the K&L scale for the radiographic assessment of ankle OA

Aims

In this randomized study, we aimed to compare quality of regenerate in monolateral versus circular frame fixation in 30 patients with infected nonunion of tibia.

Implant removal is necessary in up to 25% of patients with plate osteosynthesis after proximal humeral fracture. Our new technique of arthroscopic implant removal offers all advantages of minimal invasive surgery. Additionally treatment of concomitant intraarticular lesions is possible. This study outlines the first results after arthroscopic implant removal in comparison with those of open implant removal. A prospective series of 40 consecutive treated patients had implant removal and arthrolysis after plate osteosynthesis of proximal humeral fracture. Implant removal was carried out due to limitation in range of movement, secondary implant dislocation and implant impingement. 30 patients (median age 63 (30–82) years) had arthroscopic, ten patients (median age 53 (34–76) years) had open implant removal. Median 10 months after implant removal subjective patient satisfaction, Constant Murley Score (CMS) and Simple Shoulder Test were determined. Arthroscopic implant removal showed comparable first results as open implant removal. There was no significant difference between CMS of both groups. The active shoulder abduction, flexion and external rotation improved significantly after arthroscopic and open implant removal. The simple shoulder test outlined advantages for the arthroscopic technique. After arthroscopic implant removal patients showed higher subjective satisfaction as well as faster pain reduction and mobilization. Analysis of perioperative data showed less blood loss in the group with arthroscopic implant removal. In 85% of patients with arthroscopic implant removal concomitant intraarticular lesions were observed and treated. The arthroscopic implant removal after plate osteosynthesis of proximal humeral fractures offers all advantages of minimal invasive surgery and comparable first results as the open implant removal. The subjective and objective satisfaction of patients is high. The technique can be applied and established by all arthroscopic trained shoulder surgeons

National guidelines recommend that trauma centres have a designated consultant for managing metastatic bone disease (MBD). No such system exists in Scotland. We compared MBD cases in a trauma hospital to a national bone tumour centre to characterise differences in management and outcome.

Consecutive patients with metastatic proximal femoral lesions referred to a trauma unit and a national sarcoma centre were compared over a seven-year period (minimum follow-up one year).

From Jan 2010-Dec 2016, 195 patients were referred to the trauma unit and 68 to the tumour centre. The trauma unit tended to see older patients (mean 72 vs. 65 years, p<0001) with cancers of poorer prognosis (e.g. 31% 61/195 vs. 13% 9/68 lung primary, p<0.001).

Both units had similar operative rates but patients referred to the tumour centre were more likely to have endoprosthetic reconstruction (EPR 44% tumour vs. 3% trauma centre, p<0.001). Patients with an EPR survived longer than those with other types of fixation (81% 17/21 vs. 31% 35/112 one-year survival, p<0.001). Patients undergoing EPR were more likely to have an isolated metastasis (62% 13/21 vs. 17% 4/24, p<0.001). One patient from each centre had a revision for failed metalwork.

There was a difference in caseload referred to both units, with the tumour centre seeing younger patients with a better prognosis. Patients suitable for endoprostheses were more likely to have isolated metastatic disease and a longer survival after surgery. An MBD pathway is required to ensure such patients are identified and referred for specialist management where appropriate.

Adequate perpendicular access to the posterolateral talar dome for osteochondral defect repair is difficult to achieve and a number of different surgical approaches have been described. This cadaveric study examined the exposure available from various approaches to help guide pre-operative surgical planning.

Four surgical approaches were performed in a step-wise manner on 9 Thiel-embalmed cadavers; anterolateral approach with arthrotomy, anterolateral approach with anterior talo-fibular ligament (ATFL) release, anterolateral approach with antero-lateral tibial osteotomy, and anterolateral approach with lateral malleolus osteotomy. The furthest distance posteriorly which allowed perpendicular access with a 2mm k-wire to the lateral surface of the talar dome was measured from the anterior aspect of the talar dome.

The mean antero-posterior diameter of the lateral talar domes included in this study was 45.1mm. An anterolateral approach to the ankle with arthrotomy provided a mean exposure of the anterior 1/3rd of the lateral talar dome. ATFL release increased this to 43.2%. A lateral malleolus osteotomy provided superior exposure (81.5% vs 58.8%) compared to an anterolateral tibial osteotomy.

Only the anterior half of the lateral border of the talar dome could be accessed with an anterolateral approach without osteotomy. A fibular osteotomy provided best exposure to the posterolateral aspect of the talar dome and is recommended for lesions affecting the posterior half of the lateral talar dome.

The use of Birmingham hip resurfacing (BHR) remains controversial due to the increased revision rate in female patients. We compared the outcomes of BHR in female patients to an age matched total hip arthroplasty(THA) cohort. We reviewed the pain, function and total Harris Hip Scores(HHS), and Kaplan-Meir survivorship for BHR and THA cohorts from a prospective regional arthroplasty database.

There were 234 patients in each cohort, with mean age of 51 years. The BHR cohort had significantly better function and total HHS at all points of the 5-year study, but not for the post-operative pain score. The 5-year revision rate for the BHR cohort was significantly higher than the THA cohort (6.8% vs 3.4%, p=0.001). The main reason for revision in the BHR cohort was aseptic loosening (n=8), followed by metallosis (n=3). The 5-year Kaplan-Meier survivorship was 92.6% (95% CI±1.7%) and 96.4% (95% CI±1.3%) for the BHR and THA cohort (p=0.001).

BHR can give significantly better functional outcomes than THA. The vast majority of female patients were happy with BHR and did not need further surgery at the 5-year stage. This is somewhat at odds with the recent reputation of the procedure. The 10-year result of the same cohort is warranted to provide further data. Our study is not a recommendation to still offer BHR to female patients, but rather to inject a note of realism into the debate. There are implications for future implant development in that these results do validate resurfacing as a functionally valuable option for active patients.

Only a few randomised, controlled studies have compared different non-operative methods of treatment of mid-shaft fractures of the clavicle.

In this prospective, randomised controlled study of 60 participants (mean age 31.6 years; 15 to 75) we compared the broad arm sling with the figure of eight bandage for the treatment of mid-shaft clavicle fractures. Our outcome measures were pain, Constant and American Shoulder and Elbow Surgeons scores and radiological union.

The mean visual analogue scale (VAS) pain score on the first day after treatment was significantly higher (VAS 1 6.8; 4 to 9) in the figure of eight bandage group than the broad arm sling group (VAS 1 5.6; 3 to 8, p = 0.034). A mean shortening of 9 mm (3 to 17) was measured in the figure of eight bandage group, versus 7.5 mm (0 to 24) in the broad arm sling group (p = 0.30).

The application of the figure of eight bandage is more difficult than of the broad arm sling, and patients experience more pain during the first day when treated with this option. We suggest the broad arm sling is preferable because of the reduction of early pain and ease of application.

Cite this article: Bone Joint J 2015;97-B:1562–5.

Aims

To evaluate interobserver reliability of the Orthopaedic Trauma Association’s open fracture classification system (OTA-OFC).

Aims

This is a prospective randomised study which compares the radiological and functional outcomes of ring and rail fixators in patients with an infected gap (> 3 cm) nonunion of the tibia.