The lack of a universal, consistent protocol for the subjective, objective and radiographic evaluation of these injuries has hampered the comparison of results. Methods. 45 patients with complex fractures of the calcaneus were included in this prospective study, which was undertaken from July 2003 to December 2005. The fracture classification of Essex-Lopresti was used. We also observed the extent of secondary fracture lines extending from the primary shear line (on axial and external oblique plain radiographs) to establish comminution. The external oblique view for subtalar joint was performed with the patient supine, the knee at about 60 degree of flexion and the limb rotated externally 45 degree with a vertical X ray beam. All of these patients were managed by an external fixator using the principle of ligamentotaxis. Patients were evaluated by AOFAS. Results. We identified two broad patterns of secondary lines on plain X-rays:. with anterior secondary fracture lines and. with posterior secondary fracture lines. There were 20 cases of tongue type and 25 of joint depression type fracture pattern by the Essex-Lopresti classification. Forty two (93.4%) patients had fractures with posterior secondary fracture line and 3 (6.7%) patients had anterior secondary lines. The calcaneo-cuboid type of anterior secondary line pattern was present in 2 (4.5%) cases, and the plantar type in only 1 (2.5%) case. We observed posterior secondary line Type A pattern in 2 (4.5%) cases, depression / central depression type B in 20 (44.5%) cases, tongue shaped Type C pattern in 16 (36.5%) cases and Type D severely comminuted fracture line pattern in 4 (8.7%) cases. Conclusion. Comminution was significantly associated with prognosis and final outcome. Evaluation of secondary fracture lines corresponds with comminution of fractures of the calcaneus and the final outcome of these fractures. NO DISCLOSURES

Classification systems for tibial plateau fractures suffer from poor interobserver agreement, and their value in preoperative assessment to guide surgical fixation strategies is limited. For tibial plateau fractures four major characteristics are identified: lateral split fragment, posteromedial fragment, anterior tubercle fragment, and central zone of comminution. These fracture characteristics support preoperative assessment of fractures and guide surgical decision-making as each specific component requires a respective fixation strategy. We aimed to evaluate the additional value of 3D-printed models for the identification of tibial plateau fracture characteristics in terms of the interobserver agreement on different fracture characteristics. Preoperative images of 40 patients were randomly selected. Nine trauma surgeons, eight senior and eight junior registrars indicated the presence or absence of four fracture characteristics with and without 3D-printed models. The Fleiss kappa was used to determine interobserver agreement for fracture classification and for interpretation, the Landis and Koch criteria were used. 3D-printed models lead to a categorical improvement in interobserver agreement for three of four fracture characteristics: lateral split (Kconv = 0.445 versus K3Dprint = 0.620; P < 0.001), anterior tubercle fragment (Kconv = 0.288 versus K3Dprint = 0.449; P < 0.001) and zone of comminution (Kconv = 0.535 versus K3Dprint = 0.652; P < 0.001). The overall interobserver agreement improved for three of four fracture characteristics after the addition of 3D printed models. For two fracture characteristics, lateral split and zone of comminution, a substantial interobserver agreement was achieved. Fracture characteristics seem to be a more reliable way to assess tibial plateau fractures and one should consider including these in the preoperative assessment of tibial plateau fractures compared to the commonly used classification systems

Gunshot-induced fractures of the proximal femur typically present with severe comminution and bone loss. These fractures may also be associated with local damage to soft tissue, neurovascular structures and injuries to abdominal organs. The aim was to evaluate the outcomes of civilian gunshot injuries to the proximal femur at a major trauma center in South Africa. A retrospective review of all patients who sustained gunshot-induced proximal femur fractures between January 2014 and December 2017 was performed. Patients with gunshot injuries involving the hip joint, neck of femur or pertrochanteric fractures were included. Patient demographics, clinical- treatment and outcome data were collected. Results are reported as appropriate given the distribution of continuous data or as frequencies and counts. Our study included 78 patients who sustained 79 gunshot-induced proximal femur fractures. The mean age of patients was 31 ± 112, and the majority of patients were male (93.6%). Pertrochantenteric fractures were the most common injuries encountered (73.4%). Treatment included cephalomedullary nail (60.8%), arthrotomy and internal fixation (16.4%) and interfragmentary fixation with cannulated screws (6%). One case of complete neck of femur fracture had fixation failure, which required conversion to total hip arthroplasty. The overall union rate was 69.6%, and 6.3% of patients developed a fracture-related infection in cases who completed follow-up. The study shows an acceptable union rate when managing these fractures and a low risk of infection. As challenging as they are, individual approaches for each fracture and managing each fracture according to their merits yield acceptable outcomes

There has been a substantial increase in the surgical treatment of unstable chest wall injuries recently. While a variety of fixation methods exist, most surgeons have used plate and screw fixation. Rib-specific locking plate systems are available, however evidence supporting their use over less-expensive, conventional plate systems (such as pelvic reconstruction plates) is lacking. We sought to address this by comparing outcomes between locking plates and non-locking plates in a cohort of patients from a prior randomized trial who received surgical stabilization of their unstable chest wall injury. We used data from the surgical group of a previous multi-centred, prospective, randomized controlled trial comparing surgical fixation of acute, unstable chest wall injuries to non-operative management. In this substudy, our primary outcome was hardware-related complications and re-operation. Secondary outcomes included ventilator free days (VFDs) in the first 28 days following injury, length of ICU and hospital stay, and general health outcomes (SF-36 Physical Component Summary (PCS) and Mental Component Summary (MCS) scores). Categorical variables are reported as frequency counts and percentages and the two groups were compared using Fisher's Exact test. Continuous data are reported as median and interquartile range and the two groups were compared using the Wilcoxon rank-sum test. From the original cohort of 207 patients, 108 had been treated surgically and had data available on the type of plate construct used. Fifty-nine patients (55%) had received fixation with non-locking plates (primarily 3.5 or 2.7 mm pelvic reconstruction plates) and 49 (45%) had received fixation with locking plates (primarily rib-specific locking plates). The two groups were similar in regard to baseline and injury characteristics. In the non-locking group, 15% of patients (9/59) had evidence of hardware loosening versus 4% (2/49 patients) in the locking group (p = 0.1). The rate of re-operation for hardware complications was 3% in the non-locking group versus 0% in the locking group (p = 0.5). No patients in either group required revision fixation for loss of reduction or nonunion. There were no differences between the groups with regard to VFDs (26.3 [19.6 – 28] vs. 27.3 [18.3 – 28], p = 0.83), length of ICU stay (6.5 [2.0 – 13.1] vs 4.1 [0 – 11], p = 0.12), length of hospital stay (17 [10 – 32] vs. 17 [10 – 24], p = 0.94) or SF-36 PCS (40.9 [33.6 – 51.0] vs 43.4 [34.1 – 49.6], p = 0.93) or MCS scores (47.8 [36.9 – 57.9] vs 46.9 [40.5 – 57.4], p = 0.95). We found no statistically significant differences in outcomes between patients who received surgical stabilization of their unstable chest wall injury when comparing non-locking plates versus locking plates. However, the rate of hardware loosening was nearly 4 times higher in the non-locking plate group and trended towards statistical significance, although re-operation related to this was less frequent. This finding is not surprising, given the inherent challenges of rib fixation including thin bones, comminution, potential osteopenia and a post-operative environment of constant motion. We believe that the increased cost of locking plate fixation in this setting is likely justifiable given these findings

Distal radius fractures have an incidence rate of 17.5% among all fractures. Their treatment in case of comminution, commonly managed by volar locking plates, is still challenging. Variable-angle screw technology could counteract these challenges. Additionally, combined volar and dorsal plate fixation is valuable for treatment of complex fractures at the distal radius. Currently, biomechanical investigation of the competency of supplemental dorsal plating is scant. The aim of this study was to investigate the biomechanical competency of double-plated distal radius fractures in comparison to volar locking plate fixation. Complex intra-articular distal radius fractures AO/OTA 23-C 2.1 and C 3.1 were created by means of osteotomies, simulating dorsal defect with comminution of the lunate facet in 30 artificial radii, assigned to 3 study groups with 10 specimens in each. The styloid process of each radius was separated from the shaft and the other articular fragments. In group 1, the lunate facet was divided to 3 equally-sized fragments. In contrast, the lunate in group 2 was split in a smaller dorsal and a larger volar fragment, whereas in group 3 was divided in 2 equal fragments. Following fracture reduction, each specimen was first instrumented with a volar locking plate and non-destructive quasi-static biomechanical testing under axial loading was performed in specimen's inclination of 40° flexion, 40° extension and 0° neutral position. Mediolateral radiographs were taken under 100 N loads in flexion and extension, as well as under 150 N loads in neutral position. Subsequently, all biomechanical tests were repeated after supplemental dorsal locking plate fixation of all specimens. Based on machine and radiographic data, stiffness and angular displacement between the shaft and lunate facet were determined. Stiffness in neutral position (N/mm) without/with dorsal plating was on average 164.3/166, 158.5/222.5 and 181.5/207.6 in groups 1–3. It increased significantly after supplementary dorsal plating in groups 2 and 3. Predominantly, from biomechanical perspective supplemental dorsal locked plating increases fixation stability of unstable distal radius fractures after volar locked plating. However, its effect depends on the fracture pattern at the distal radius

Purpose. Isolated fractures of femoral condyle in the coronal plane (Hoffa fracture) is rare and is surgically challenging to treat. 44 patients were operated between 2004–2014. The aim was to retrospectively assess the fracture patterns, fixation done and functional outcome. Methods. All injuries resulted from direct trauma to the knee out of which 36 were due to road traffic accidents.38 were closed injuries and the rest open.35 involved lateral condyle, 8 involved medial condyle and one was bicondylar type. All were anatomically reduced with fixation decided based on preoperative radiographs, CT scan and intra-op observation. Early passive motion and isometric exercises were started but kept non-weight bearing for 6–8 weeks. The mean follow up period was five years. Outcomes were measured using Neer's scoring system and International Knee Society Documentation Committee (IKDC) Functional Score. Results. 26 patients had excellent outcome, 14 had satisfactory and 4 had unsatisfactory outcome which corresponded with the specified fracture severity pattern. Uniformly excellent results were obtained in all simple pattern fractures, whereas comminuted fracture patterns were more challenging to treat with variable outcomes. Conclusion. In our retrospective observational study, we found that each fracture had specific pattern which dictated the treatment plan and the prognosis. Subsequently we grouped the fractures and proposed a classification system that would specify the pattern of fracture and dictate the type of fixation preferred. We conclude that therapeutic outcome is significantly affected by the amount of articular surface comminution, posterior cortex comminution, attainment of anatomical reduction and stable fixation

Introduction. IM (Intra Medullary) nail fixation is the standard treatment for diaphyseal femur fractures and also for certain types of proximal and distal femur fractures. Despite the advances in the tribology for the same, cases of failed IM nail fixation continue to be encountered routinely in clinical practice. Common causes are poor alignment or reduction, insufficient fixation and eventual implant fatigue and failure. This study was devised to study such patients presenting to our practice and develop a predictive model for eventual failure. Materials and Methods. 57 patients who presented with failure of IM nail fixation (± infection) between Jan 2011 – Jun 2020 were included in the study and hospital records and imaging reviewed. Those fixed with any other kinds of metalwork were excluded. Classification for failure of IM nails – Type 1: Failure with loss of contact of lag screw threads in the head due to backing out and then rotational instability, Type 2A: Failure of the nail at the nail and lag screw junction, Type 2B: Failure of the screws at the nail lag screw junction, Type 3: Loosening at the distal locking sites with or without infection. X-rays reviewed and causes/site of failure noted. Results. Total patients - 57. Demography - Average age - 58.9 years, 22 Males and 35 females. Eleven patients were noted to have an infection at the fracture site that needed oral or IV antibiotics.16 patients - at least 1 cerclage wire for fracture reduction and fixation + IM Nail. Subtrochanteric fractures (42/57) were the most common to fail. In those fractures with postero-medial comminution, locking of the lag screw in position thus preventing backout can prevent failure. In type 2 failures, preventing varus fixation by early open reduction and temporary fixation with plates and screws can achieve improved results. Those with type 3 failures with periosteal reaction should be considered to be infected until proven otherwise. Conclusions. This classification for failure of IM nails in the femur can be used as a predictive model for failures and allow early recognition and intervention to tackle them

A reverse shoulder arthroplasty has become increasingly common for the treatment of proximal humerus fractures. A reverse shoulder arthroplasty is indicated especially in older and osteopenic individuals in whom the osteopenia, fracture type or comminution precludes fixation. However, there are many other ways to treat proximal humerus fractures and many of these are appropriate for different indications. Percutaneous pinning remains an option in certain surgical neck or valgus impacted proximal humerus fractures with minimal or no comminution at the medial calcar. In general, a fracture that is amenable to open reduction and fixation should be fixed. Open reduction and internal fixation should be the gold standard treatment for three-part fractures in younger and middle-aged patients. Four-part fractures should also be fixed in younger patients. Hemiarthroplasty results are less predictable as they are very dependent on tuberosity healing. While a reverse shoulder replacement may be considered in patients with severe comorbidities, patients always have better outcomes in the setting of an appropriately reduced and stably fixed proximal humerus fracture

Management of acetabular fractures in the elderly population remains somewhat controversial in regards to when to consider is open reduction internal fixation (ORIF) versus acute primary total hip. study aims to (1) describe outcome of this complex problem and investigate predictors of successful outcome. This retrospective study analyzes all acetabular fractures in patients over the age of 60, managed by ORIF at a tertiary trauma care centre between 2007 and 2018 with a minimum follow up of one year. Of the 117 patients reviewed, 85 patients undergoing ORIF for treatment of their acetabular fracture were included in the analysis. The remainder were excluded based management option including acute ORIF with THA (n=10), two-stage ORIF (n=2), external fixator only (n=1), acute THA (n=1), and conservative management (n=1). The remainder were excluded based on inaccessible medical records (n=6), mislabelled diagnosis (n=6), associated femoral injuries (n=4), acetabular fracture following hemiarthroplasty (n=1). The mean age of the cohort is 70±7 years old with 74% (n=62) of patients being male. Data collected included: demographics, mechanism of injury, Charlson Comorbidity Index (CCI), ASA Grade, smoking status and reoperations. Pre-Operative Radiographs were analyzed to determine the Judet and Letournel fracture pattern, presence of comminution and posterior wall marginal impaction. Postoperative radiographs were used to determine Matta Grade of Reduction. Outcome measures included morbidity-, mortality- rates, joint survival, radiographic evidence of osteoarthritis and patient reported outcome measures (PROMs) using the Oxford Hip Score (OHS) at follow-up. A poor outcome in ORIF was defined as one of the following: 1) conversion to THA or 2) the presence of radiographic OA, combined with an OHS less than 34 (findings consistent with a hip that would benefit from a hip replacement). The data was analyzed step-wise to create a regression model predictive of outcome following ORIF. Following ORIF, 31% (n=26) of the cohort had anatomic reduction, while 64% (n=54) had imperfect or poor reduction. 4 patients did not have adequate postoperative radiographs to assess the reduction. 31 of 84 patients undergoing ORIF had a complication of which 22.6% (n=19) required reoperation. The most common reason being conversion to THA (n=14), which occurred an average of 1.6±1.9 years post-ORIF. The remainder required reoperation for infection (n=5). Including those converted to THA, 43% (n=36) developed radiographic OA following acetabular fracture management. The mean OHS in patients undergoing ORIF was 36 ± 10; 13(16%) had an OHS less than 34. The results of the logistic regression demonstrate that Matta grade of reduction (p=0.017), to be predictive of a poor outcome in acetabular fracture management. With non-anatomic alignment following fixation, patients had a 3 times greater risk of a poor outcome. No other variables were found to be predictive of ORIF outcome. The ability to achieve anatomic reduction of fracture fragments as determined by the Matta grade, is predictive of the ability to retain the native hip with acceptable outcome following acetabular fracture in the elderly. Further research must be conducted to determine predictors of adequate reduction in order to identify candidates for ORIF

Purpose. Locking plate constructs for proximal humerus fractures can fail due to varus collapse, especially in the presence of osteoporosis and comminution of the medial cortex. Augmentation using a fibular allograft as an intramedullary bone peg may strengthen fixation preventing varus collapse. This study compared the ability of the augmented locking plate construct to withstand repetitive varus stresses relative to the non-augmented construct in cadaveric specimens. Method. Proximal humerus fractures with medial comminution were simulated by performing wedge-shaped osteotomies at the surgical neck in cadaveric specimens. For each cadaver (n=8), one humeral fracture was fixated with the locking plate construct alone and the other with the locking plate construct plus ipsilateral fibular autograft augmentation. The humeral head was immobilized and a repetitive, medially-directed load was applied to the humeral shaft until failure (significant construct loosening or humeral head screw pull-out). Results. No augmented construct failed, withstanding either 20 000 cycles or five times the cycles of the contralateral non-augmented construct [average (standard deviation) = 27958 (4633) cycles], while six of the eight non-augmented constructs failed (p=0.007). Failure in the six non-augmented constructs occurred after an average of 5928 (2543) cycles. Conclusion. Fibular allograft augmentation increased the ability of the locking plate construct to withstand repetitive varus loading. Clinically, this may assist proximal humerus fracture fixation in osteoporotic bone with medial cortex comminution

Purpose. To elucidate whether there is an advantage in external fixation supplementation of K-wires in comparison to K-wires and plaster, in the treatment of distal radius fractures without metaphyseal comminution. Indications. Distal intraarticular radius fractures, Frykman VIII or VIII without metaphyseal comminution. Contraindications. Metaphyseal comminution, general medical contraindications for surgical intervention. Study design. Fifty-one patients were prospectively randomised in two groups: 24 patients were treated with K-wire and spanning external fixation supplementation, and 27 were treated with K-wires and plaster. Results. Patients were monitored following the operation with a minimum follow up of 1 year, and checked independently of surgeon for pain, satisfaction and range of motion. There was a statistically significant difference in favour of the external fixation patient group for pain (Visual Analogue Score, Ex-Fix group: mean 14.9, plaster group: mean 28.1, p<0.001) and satisfaction (Ex-Fix group: mean 89.7, plaster group: mean 76.3, p<0.001,). Although one would expect that range of motion would be reduced in the external fixation group, there were no statistically significant differences found in favour of plaster; on the contrary supination results were surprisingly in favour of the external fixation group (Ex-Fix group: mean 54.4, plaster group: mean 45.2, p<0.05). Conclusion. In this study, external fixation supplementation of K-wiring had statistically significant superior results in patient satisfaction score, pain score, and wrist supination in comparison to plaster augmentation of K-wiring

Surgical fixation of tibial plateau fractures in elderly patients with open reduction and internal fixation (ORIF) provides inferior outcomes compared to younger patients. Primary total knee arthroplasty (TKA) may be of benefit in patients with pre-existing arthritis, marked osteopenia, or severe fracture comminution. Rationale for primary TKA includes allowing early mobility in hopes of reducing associated complications such as deconditioning, postoperative pneumonia, or venous thromboembolism, and reducing post-traumatic arthritis which occurs in 25% to 45% of patients and requires revision TKA in up to 15%. Subsequent revision TKA has been shown to have significantly worse outcomes than TKA for primary osteoarthritis. This systematic review sought to elicit the clinical outcomes and peri-operative complication rates following primary TKA for tibial plateau fractures. A comprehensive search of MEDLINE, Embase, and PubMed databases from inception through March 2018 was performed in accordance with PRISMA guidelines. Two reviewers independently screened papers for inclusion and identified studies featuring perioperative complications and clinical outcomes following primary TKA for tibial plateau fractures. Studies were included for final data analysis if they met the following criteria: (1) studies investigating TKA as the initial treatment for tibial plateau fractures, (2) patients must be ≥ 18 years old, (3) have a minimum ≥ 24-month follow-up, and (4) must be published in the English language. Case series, cohort, case-control, and randomized-control trials were included. Weighted means and standard deviations are presented for each outcome. Seven articles (105 patients) were eligible for inclusion. The mean age was 73 years and average follow-up was 39 months. All-cause mortality was 4.75% ± 4.85. The total complication rate was 15.2% ± 17.3% and a total of eight patients required revision surgery. Regarding functional outcomes, the Knee Society score was most commonly reported. The average score on the knee subsection was 85.6 ± 5.5 while the average function subscore was 64.6 ± 13.7. Average range of motion at final follow-up was 107.5° ± 10°. Total knee arthroplasty for the treatment of acute tibial plateau fractures is enticing to allow early mobility and weightbearing. However, complication rates remain high. Functional outcomes are similar to patients treated with ORIF or delayed arthroplasty. Given these findings, surgeons should be highly selective in performing TKA for the immediate treatment of tibial plateau fractures

Distal radius fractures are among the most common fractures seen in the emergency department. Closed reduction can provide definitive management when acceptable radiographic parameters are met. Repeated attempts of closed reduction are often performed to improve the alignment and avoid operative management. However, multiple reduction attempts may worsen dorsal comminution and lead to eventual loss of reduction, resulting in no demonstrable benefit. We hypothesize that compared to one closed reduction attempt, repeated closed reduction of extra-articular, dorsally angulated, displaced distal radius fractures has a low success rate in the prevention of operative fixation and improvement of radiographic parameters. Initial and post reduction radiographs for all distal radius fractures managed at Vancouver General Hospital between 2015 and 2018 were reviewed. Inclusion criteria were based on the AO fracture classification and included types 23-A2.1, 23-A2.2 and 23-A3. Exclusion criteria included age less than 18, intra-articular involvement with more than two millimeters of displacement, volar or dorsal Barton fractures, fracture-dislocations, open fractures and volar angulation of the distal segment. Distal radius fractures that met study criteria and underwent two or more attempts of closed reduction were matched by age and gender with fractures that underwent one closed reduction. Radiographic parameters including radial height and inclination, ulnar variance and volar tilt were compared between groups. Sixty-eight distal radius fractures that met study criteria and underwent multiple closed reduction attempts were identified. A repeated closed reduction initially improved the radial height (p = 0.03) and volar tilt (p < 0.001). However, by six to eight weeks the improvement in radial height had been lost (p = 0.001). Comparison of radiographic parameters between the single reduction and multiple reduction groups revealed no difference in any of the radiographic parameters at one week of follow up. By six to eight weeks, the single reduction group had greater radial height (p = 0.01) ulnar variance (p = 0.05) and volar tilt (p = 0.02) compared to the multiple reduction group. With respect to definitive management, 38% of patients who underwent a repeated closed reduction subsequently received surgery, compared to 13% in the single reduction group (p = 0.001). Repeated closed reduction of extra-articular, dorsally angulated, displaced distal radius fractures did not improve alignment compared to a single closed reduction and was associated with increased frequency of surgical fixation. The benefit of repeating a closed reduction should be carefully considered when managing distal radius fractures of this nature

Distal radius fractures are among the most common fractures seen in the emergency department. Closed reduction can provide definitive management when acceptable radiographic parameters are met. Repeated attempts of closed reduction are often performed to improve the alignment and avoid operative management. However, multiple reduction attempts may worsen dorsal comminution and lead to eventual loss of reduction, resulting in no demonstrable benefit. We hypothesize that compared to one closed reduction attempt, repeated closed reduction of extra-articular, dorsally angulated, displaced distal radius fractures has a low success rate in the prevention of operative fixation and improvement of radiographic parameters. Initial and post reduction radiographs for all distal radius fractures managed at Vancouver General Hospital between 2015 and 2018 were reviewed. Inclusion criteria were based on the AO fracture classification and included types 23-A2.1, 23-A2.2 and 23-A3. Exclusion criteria included age less than 18, intra-articular involvement with more than two millimeters of displacement, volar or dorsal Barton fractures, fracture-dislocations, open fractures and volar angulation of the distal segment. Distal radius fractures that met study criteria and underwent two or more attempts of closed reduction were matched by age and gender with fractures that underwent one closed reduction. Radiographic parameters including radial height and inclination, ulnar variance and volar tilt were compared between groups. Sixty-eight distal radius fractures that met study criteria and underwent multiple closed reduction attempts were identified. A repeated closed reduction initially improved the radial height (p = 0.03) and volar tilt (p < 0.001). However, by six to eight weeks the improvement in radial height had been lost (p = 0.001). Comparison of radiographic parameters between the single reduction and multiple reduction groups revealed no difference in any of the radiographic parameters at one week of follow up. By six to eight weeks, the single reduction group had greater radial height (p = 0.01) ulnar variance (p = 0.05) and volar tilt (p = 0.02) compared to the multiple reduction group. With respect to definitive management, 38% of patients who underwent a repeated closed reduction subsequently received surgery, compared to 13% in the single reduction group (p = 0.001). Repeated closed reduction of extra-articular, dorsally angulated, displaced distal radius fractures did not improve alignment compared to a single closed reduction and was associated with increased frequency of surgical fixation. The benefit of repeating a closed reduction should be carefully considered when managing distal radius fractures of this nature

Proximal humeral fractures occur frequently, with fixed angle locking plates often being used for their treatment. However, the failure rate of this fixation is high, ranging between 10 and 35%. Numerous variables are thought to affect the performance of the fixation used, including the length and configuration of screws used and the plate position. However, there is currently limited quantitative evidence to support concepts for optimal fixation. The variations in surgical techniques and human anatomy make biomechanical testing prohibitive for such investigations. Therefore, a finite element osteosynthesis test kit has been developed and validated - SystemFix. The aim of this study was to quantify the effect of variations in screw length, configuration and plate position on predicted failure risk of PHILOS plate fixation for unstable proximal humerus fractures using the test kit. Twenty-six low-density humerus models were selected and osteotomized to create a malreduced unstable three-part fracture AO/OTA 11-B3.2 with medial comminution which was virtually fixed with the PHILOS plate. In turn, four different screw lengths, twelve different screw configurations and five plate positions were simulated. Each time, three physiological loading cases were modelled, with an established finite element analysis methodology utilized to evaluate average peri-screw bone strain, this measure has been previously demonstrated to predict experimental fatigue fixation failure. All three core variables lead to significant differences in peri-screw strain magnitudes, i.e. predicted failure risk. With screw length, shortening of 4 mm in all screw lengths (the distance of the screw tips to the joint surface increasing from 4 mm to 8 mm) significantly (p < 0 .001) increased the risk of failure. In the lowest density bone, every additional screw reduced failure risk compared to the four-screw construct, whereas in more dense bone, once the sixth screw was inserted, no further significant benefit was seen (p=0.40). Screw configurations not including calcar screws, also demonstrated significant (p < 0 .001) increased risk of failure. Finally, more proximal plate positioning, compared to the suggested operative technique, was associated with reduced the predicted failure risk, especially in constructs using calcar screws, and distal positioning increased failure risk. Optimal fixation constructs were found when placing screws 4 mm from the joint surface, in configurations including calcar screws, in plates located more proximally, as these factors were associated with the greatest reduction in predicted fixation failure in 3-part unstable proximal humeral fractures. These results may help to provide practical recommendations on the implant usage for improved primary implant stability and may lead to better healing outcomes for osteoporotic proximal fracture patients. Whilst prospective clinical confirmation is required, using this validated computational tool kit enables the discovery of findings otherwise hidden by the variation and prohibitive costs of appropriately powered biomechanical studies using human samples

Peri-prosthetic distal femoral fractures around total knee replacement is a highly complex reconstructive challenge, particularly in the presence of bone comminution and poor bone quality in elderly patients. With the incidence of peri-prosthetic fractures ranging from 0.3% to 2.5%, this is becoming a common problem. Older patients with concomitant medical issues have a very limited tolerance for prolonged immobilisation. It is the author's practice to revise, rather that attempt to fix, peri-prosthetic fractures of the knee which are very close to the femoral or tibial implants, particularly when associated with osteoporosis and comminution. When compared to fracture fixation, distal femoral replacement has significantly shorter operative time, less blood loss, and shorter hospital stay. Patients have been shown to recover faster, have fewer complications, and left hospital sooner. The general assumption has been that the use of a distal femoral replacement prosthesis is cost prohibitive in revision total knee settings, however, initial differences in the price of the prosthesis are more than offset by a shortened hospital stay and a more rapid return to pre-fracture level of function

Purpose of study:. The treatment goals in diaphyseal radius fractures are to regain and maintain length and rotational stability. Open reduction and plating remains the gold standard but carries the inherent problems of soft tissue disruption and periosteal stripping. Intramedullary nailing offers advantages of minimally invasive surgery and minimal soft tissue trauma. The purpose of this study is to describe the results of locked intramedullary nailing for adult gunshot diaphyseal radius fractures. Methods:. A retrospective review of clinical and radiological records was performed on patients with intramedullary nailing of isolated gunshot radius fractures between 2009 and 2013. Results:. Twenty-two nails were inserted in 22 patients, all males with a mean age of 28.9 years (range 19–40). Follow-up was for an average period of 11 weeks (range 6–24). One patient had a median nerve palsy and 2 a posterior interosseous nerve palsy pre-operatively. All operations were performed within 3 to 12 days of the injury. No primary bone grafting was performed. All fractures united with the index procedure. Average time to union was 10 weeks (range 8–24). Fourteen patients (64%) had their radial bow restored and maintained; these patients had minimal comminution in the middle to distal third of the radius. The bow could not be satisfactorily restored in severely comminuted fractures in the proximal third of the radius. Using the Anderson classification outcome was excellent in 14 patients (64%), satisfactory in 6 (27%) and unsatisfactory in 2 (9%). There were no complications associated with the surgery and one patient required nail removal for implant migration. Conclusion:. Intramedullary nail fixation of gunshot radius fractures has shown promising results in our hands with no significant complications. The fracture site and zone of comminution directly influenced our ability to restore radial bow

Deep infection after acetabular fracture surgery is a serious complication, ranging between 1.2% and 2.5% and has been a challenge for patients and surgeons. It increases length of hospital stay by three to four times due to the need of extra surgeries for debridement, impairs future patient's mobility, and increases the overall costs of care. Aim: We aim to identify pre- and intra-operative risk factors associated with deep infections in surgically treated acetabular fractures. Methods: In a single-center retrospective case-control study, 447 consecutive patients who underwent open reduction and internal fixation of acetabular fractures were included in the study. Diagnosis of surgical site infections required a combination of clinical signs and positive tissue culture or histological signs of tissue infection according to Lipsky et al (2010) and Fleischer et al (2009). To evaluate risk factors from SSI we performed uni- and multivariate analysis by multiple logistic regression. Results: Among 447 patients studied, 23 (5.1%) presented diagnosis of postoperative infection. 349 (78.1%) were male with a mean age of 33.3 years old. Posterior wall fractures accounted for 119 cases (26.6%) followed by 102 (22.8%) double column fractures and 57 (12.8%) T fractures. Factors associated with a significantly risk of infection were patient-related: older age and alcoholism (OR = 5.15, 95% CI = 1.06 to 21.98; p=0.036); trauma-related: fractures of the lower limb (odds ratio [OR] = 2.7, 95% confidence interval [CI] = 1.8 to 6.78; p=0.017), comminution (OR = 3.6, 95% CI = 1.19 to 8.09; p=0.009), pelvic ring injuries (OR = 2.89, 95% CI = 1.07 to 7.63; p=0.037); and surgical-related: peri- operative complications (OR = 5.12, 95% CI = 1.85 to 13.8; p=0.001), and dislocation (OR = 0.21, 95% CI = 0.03 to 0.96; p=0.023). Duration of surgery longer than 300 min (p=0.002), and type of surgical approach (p<0.001) were also associated with infection. Conclusion: Deep infections after acetabular fracture surgery were mainly associated with prolonged duration of surgery and the interrelation with the complexity of the fracture such as double column fractures, combined surgical approach, comminution and intra operative complications. Pelvic ring injuries, lower limb fractures, mean age, no dislocations at the time of accident and alcoholism is others associations

There is continuing debate among orthopedists regarding the appropriate treatment of femoral neck fractures, open reduction internal fixation (ORIF), Total hip arthroplasty (THA) or hemiarthroplasty. In 2003 310,000 patients were hospitalized for hip fracture in the United States and about one-third were treated with total hip arthroplasty. Worldwide, the total number of hip fractures is expected to surpass 6 million by the year 2050. In a survey distributed by the American Association of Hip and Knee Surgeons, and of the 381 members who responded, 85% preferred hemiarthroplasty, 2% preferred ORIF and 13% preferred THA. The decision to perform internal fixation, hemiarthroplasty, or THA is based on comminution of the fracture activity level and independence, bone quality, presence of rheumatoid or degenerative arthritis, and mental status. Evidence based practice indicates that in a young patient with good bone stock and a fracture with relatively low comminution an ORIF is the treatment of choice. If the patient has a comminuted fracture with poor bone quality, minimal DJD, no RA, and low activity demand a hemiarthroplasty is a reasonable choice. If the patient has a comminuted fracture with poor bone quality, DJD and high activity demand a total hip replacement is a reasonable choice

Aim. Up to 34% of fractures of the distal radius in children can ‘re-displace’ early after reduction. Main risk factors are initial displacement (bayonet apposition, > 50% translation, and > 30°angulation), isolated distal radius fracture, associated ulna fracture at the same level, inadequate initial closed reduction and poor casting technique. This study was to identify the rate of ‘re-displacement’ following first successful reduction in distal radius fractures. We also assessed the risk factors associated with initial injury and compared the efficacy of the available indices to assess the quality of casting. Materials & Methods. We performed a case note based radiographic analysis of 90 distal radius fractures treated at our centre from 2005 to 2008. A cohort of 18 patients with re-displacement was compared with 72 patients with maintenance of reduction. Radiological indices were calculated to assess the quality of casting technique. The patient and fracture demographics were compared between the two groups. Statistical analysis was carried out using ANOVA, Fisher's Exact Test and multiple logistic regression analysis. Results. The rate of ‘re-displacement’ in our study was 20 %. A desirable cast index of < 0.7 was achieved in 4 out of 55 cases treated with cast alone. A significant difference (p< 0.008) was observed in the Three Point Index, the degree of comminution (< 0.01) and the quality of the initial reduction (< 0.003). Conclusion. We recommend careful identification of high risk factors and appropriate stabilisation for potentially unstable fractures at first treatment. The magnitude of initial deformity, the comminution, and the amount of remaining skeletal growth must all be considered in the decision making process. Further training to improve the quality of casting technique cannot be over-emphasised. Trainees should be trained to calculate the Three Point Index before accepting the reduction after casting to prevent late displacement and second anaesthesia