Aims. Porous metaphyseal cones can be used for fixation in revision total knee arthroplasty (rTKA) and complex TKAs. This metaphyseal fixation has led to some surgeons using shorter cemented stems instead of diaphyseal engaging cementless stems with a potential benefit of ease of obtaining proper alignment without being beholden to the diaphysis. The purpose of this study was to evaluate short term clinical and radiographic outcomes of a series of TKA cases performed using 3D-printed metaphyseal cones. Methods. A retrospective review of 86 rTKAs and nine complex primary TKAs, with an average age of 63.2 years (SD 8.2) and BMI of 34.0 kg/m. 2. (SD 8.7), in which metaphyseal cones were used for both femoral and tibial fixation were compared for their knee alignment based on the type of stem used. Overall, 22 knees had cementless stems on both sides, 52 had cemented stems on both sides, and 15 had mixed stems. Postoperative long-standing radiographs were evaluated for coronal and sagittal plane alignment. Adjusted logistic regression models were run to assess malalignment hip-knee-ankle (HKA) alignment beyond ± 3° and sagittal alignment of the tibial and femoral components ± 3° by stem type. Results. No patients had a revision of a cone due to aseptic loosening; however, two had revision surgery due to infection. In all, 26 (27%) patients had HKA malalignment; nine (9.5%) patients had sagittal plane malalignment, five (5.6%) of the tibia, and four (10.8%) of the femur. After adjusting for age, sex, and BMI, there was a significantly increased risk for malalignment when a cone was used and both the femur and tibia had cementless compared to cemented stems (odds ratio 3.19, 95% confidence interval 1.01 to 10.05). Conclusion. Porous 3D-printed cones provide excellent metaphyseal fixation. However, these central cones make the use of offset couplers difficult and may generate malalignment with cementless stems. We found 3.19-times higher odds of malalignment in our TKAs performed with metaphyseal cones and both femoral and tibial cementless stems. Cite this article: Bone Joint J 2021;103-B(6 Supple A):150–157

Introduction. To evaluate the effect of hydroxyapatite coating, two same shape cementless stems were compared in this randomized control trial study. Methods. Between May 2003 and February 2010, 88 patients had a primary cementless total hip arthroplasty with two different types of cementless stems. Forty-three patients had Proarc stems (P group) (Kyocera Medical, Osaka, Japan), and Forty-five patients had Proarc HA stems (HA group) (Kyocera Medical, Osaka, Japan) which was coated with thin (20 micrometer) hydroxyapatite on Proarc rough porous coating. Gender distribution, average age at surgery, average weight and average follow-up period were same in the two groups. The average follow-up period was 8.5 years (range, 5 to 13 years). The average age at the time of surgery was 63 years. Porous acetabular shells and highly crosslinked polyethylene liners made by Kyocera Medical corporation were implanted into all hips. Stems were implanted with a modified Hardinge surgical approach without trochanteric osteotomy. Harris Hip Score was used for clinical evaluation. Post-op radiographs of these patients were evaluated. Fisher's exact probability test was used for statistical analysis. P values of less than 0.05 were considered to be significant. Results. The mean preoperative score and postoperative score of P group were 39 points and 86 points, respectively. The mean preoperative score and postoperative score of HA group were 46 points and 87 points, respectively. All stems were evaluated as bone-ingrown fixation in both groups. The rate of varus inclination was not different between two groups. The rate of severe stress shielding was not different. Discussion. However hydroxyapatite coating is useful for early fixation, the adverse effect, such as delamination for long-term in vivo situation is questionable. There was no significant difference between P-group and HA group in the present study. Longer follow-up is required to evaluate hydroxyapatite coating

Clinical and radiological results of total hip arthroplasty (THA) using proximally coated single wedge (PSW) cementless stems are generally excellent. The geometry of cementless stems and the morphology of proximal femurs (Dorr types) provide optimal fit for primary stability and secondary biologic fixation. Because the geometry of PSW shape is designed to be engaged at the metaphysis, cementless PSW stem is not traditionally recommended to Dorr type C femurs with concerns of inadequate implant-host bone contact and the risk of femoral fracture. Nevertheless, previous studies on PSW cementless stems have not examined long-term survivorship according to Dorr types of femur. Paucity of a long-term comparative study makes it difficult to know whether the PSW stem plays a role in Dorr type C femurs or not. We postulated that the PSW stem could achieve stable fixation without increased risk of femoral fracture even in Dorr type C femurs, and demonstrate acceptable long-term results. The aim of this study was to investigate differences of clinical and radiological outcomes of THA using PSW stem according to proximal femoral geometry (Dorr types) in more than a 10-year follow-up. Three hundred and seven primary THA in 247 patients, which was performed with use of a single-designed PSW stem from 1997 to 2003 and was followed up for over 10 years, were included in this retrospective study. According to Dorr's criteria, 89 femora were classified as Type A, 156 as Type B, and 62 as Type C. The patients' mean age at operation was 43.2 years (range, 18.4 – 69.6 years). They were followed-up for an average of 13.2 years (the range, 10.0 – 17.3 years). All of the hips were evaluated clinically and radiologically with special attention to the occurrence of implant loosening and periprosthetic femoral fracture. The mean preoperative Harris hip score (50.4±20.6 points) improved significantly to 95.6±9.0 points at the final follow-ups. The improvements were observed regardless of Dorr types (p<0.001 in all 3 groups). The incidence of thigh pain (p=0.704) was not significantly different among groups. Implant survivorship was 100% in all 3 groups. None of the stems were loosened or revised. No significant differences were observed in osteolysis (p=0.492), pedestal formation (p=0.323), or cortical hypertrophy (p=0.169) among the groups [Fig. 1]. Radiolucent lines less than 2mm in thickness in Gruen zone 4 were observed more in Dorr type C femora than in Dorr type A or B (p=0.003) [Fig. 2]. Spot weld (p<0.001) and stress shielding (p=0.010) of proximal femur were more pronounced in Dorr C type femora than in type A or B [Fig. 3]. The prevalence of intraoperative (p=0.550) or postoperative (p=0.600) femoral fractures were not significantly different among the groups. From over a 10-year follow-up, the PSW stem provided excellent stem survivorship regardless of Dorr type with satisfactory outcomes. The remodeling process around the stem was more pronounced in Dorr type C femur. The present study shows that the PSW stem is a recommendable option for Dorr type C femur. For any figures or tables, please contact authors directly (see Info & Metrics tab above).

Elderly femoral neck fractures are often treated with cemented stems according to the reason that bone quality of the patients is not good enough to obtain the initial stability for supporting press fit cementless stem. Some elderly patients also have medullary expanding so called stovepipe canals which make initial stability of press fit stems difficult. Stems with lateral flare have some mechanical advantages to obtain proximal fixation compare to the straight stems without lateral flare. Concerning to initial stability, their vertical loads can be supported not only by proximal medial cortex but also by proximal lateral cortex. The stems also have rotational stability because of the proximal high fit and fill. As lateral flare is a transverse extension in axial section, the stem occupies the proximal canal widely. So it provides strong rotational stability. The purpose of this study was to evaluate the outcome of press fit cementless stem with lateral flare for elderly femoral neck fractures with poor bone quality and with medullary expanding. We performed a retrospective review of the clinical records and radiograghs of consecutive 42 patients (42 hips) of femoral neck fracture operated with cement-less stems with lateral flare in 2005 and 2006. In this period, all displaced femoral neck fractures were operated using cementless stems with lateral flare (Revelation Hip System, DJO, USA) in our hospital. We could follow 24 patients for over one year. 12 of 24 patients had so called stovepipe canals according to Canal Flare Index< 3.0 (Noble et al). Minimum follow up duration was one year. The mean age of the patients at the time of operation was 78.2 years. The mean duration of follow-up was one year and three month. At the time of final follow-up, stem subsidence, stem fixation, spot welds and demarcation line at distal part of stem are assessed on radiograph. And operation time, blood loss at operation and complaint of thigh pain through all the follow up period are also investigated on clinical record. There was no stem subsidence over 2mm and demarcation line in two cases. All stems were assessed bone-grown fixation. We could find at least one spot welds in all patients around porous coated part of the stem. The mean operation time was 60.1 min. and mean blood loss was 240.5 ml. There was no patient who complaints of thigh pain after operation. Cementless stems with lateral flare were seemed to obtain good initial stem fixation for elderly femoral neck fracture patients even they have poor bone quality and medullary expanding

In revision hip Arthroplasty, there often exists the intact femoral cortex under the level of loosened stem. In such cases we used a mid-length full-porous Cementless stem, because femoral bone remodeling and reinforcement could be obtained. We evaluated the readiographical change in femur after the inplantation of full-porous Cementless stem. Materials and methods: Thirteen revision hip Arthroplasties with the use of mid-length full-porous Cementless stem (Ostenics Specilty Stem) were evaluated. Before revision operation, aseptic loosening and sinking of femoral stem were seen in all hips. In three hips, varus shift of femoral component was seen, and in one hip, anterior shift was seen. Bone graft was done only around the proximal femoral defect. No bone graft was done at the level of middle and distal bone defect of the femur. The average age at revision operation was 59 (43-75) years old. Average follow up was 32 (15-59) months. All hip were evaluated clinically and radiographically, especially about the femoral cortical bone remodellig after operation. Results: Ten patients were pain free, and three had thigh pain. Subsidence of the stem occurred in one patient who complained of thigh pain. In this patient, cortical enlargement and thinning of femur was extreme before operation. Other 12 cases have no subsidence of the stem. Ten patients had a satisfactory result in clinically and radiographically. In six patients, who had bone defect of middle and distal femur before operation, the new bone formation between stem and the cortex of the femur was seen at the latest follow up. Femoral bone remodeling was optained in the middle and distal femur without bone graft. Conclusion: Revision hip Arthroplasty with the use of full porous Cementless stem is a useful option because femoral bone remodeling and reinforcement can be obtained

OBJECTIVE OF THE STUDY. The objective of this study is to establish the medium-term clinical and radiological results with the cementless three-dimensional Vektor-Titan stem compared with conventional cementless stem, such as PerFix stem. The latter stem has a double-wedge design with a rounded distal portion for canal filling (Fig. 1). MATERIALS AND METHODS. From July, 2004, to May, 2010, fifty seven Vektor-Titan stems and 150 PerFix stems were implanted for the patients with osteoarthritis, avascular necrosis, femoral neck fracture, and rheumatoid arthritis in our hospital. The results were evaluated clinically using Japanese Orthopedic Association (JOA) scores and the Merle d’Aubigne and Postel (M&P) scores. Radiographs were analyzed retrospectively. The criteria used for determining loosening were migration or a total radiolucent zone between the prosthesis/bone cement and host bone, wherein the width increased progressively or change of position, i.e., migration or subsidence of the prosthesis. Migration of the socket seen on the radiograph was defined as either the presence of a ≥2-mm position change or rotation. Position changes of the stem seen on the radiograph were defined as the presence of a progressive subsidence of ≥2 mm or change of position, e.g., varus or valgus. The follow-up period was 9.2 ± 2.6 (range, 5.0–14.0) years. RESULTS. One patient had intraoperative femoral shaft fracture and healed by conservative treatment. The mean JOA and M&P scores improved from preoperative 39.3 and 6.8 points to postoperative 90.9 and 17.2 points, respectively. Thigh pain was less frequent for Vektor-Titan stems (Table 1). Radiolucent lines was far less likely to appear for Vektor-Titan stems evaluated by Gruen's zonal analyses (Table 2). On the other hand, there were radiolucent zones of more than 90% in zone 4 with cementless PerFix stems (Table 2). There was no cases of loosening or postoperative infection. Although signs of bone atrophy were found in the proximal femur and the trochanters in 66.7 % of all cases, bone structure was radiologically normal without stress shielding in most cases (Table 2). On the contrary, there was evidence of an even denser bone structure, such as trabeculae, at the tip of the stem and the lateral implant fixation within the greater trochanter in Vektor-Titan stem cases. These findings remained unchanged over observation periods. DISCUSSION AND CONCLUSIONS. The cementless Vektor-Titan stem is made of Ti6AI7Nb, has got the shape of a straight three-dimensional cone. It has a high proximal volume in the form of a three-dimensional taper with longitudinal ribs. This design achieves strong primary fixation in the proximal metaphysis. Radiologically, newly formed trabeculae toward to the stem were indicative of direct biological fixation at the bone-implant interface. Medium-term results with the cementless Vektor-Titan stem show no implant loosening with stable metaphyseal fixation and preservation of bone structure in the proximal femur and the absence of radiolucent zones around the stem compared with conventional cementless stem

Introduction. Fixation patterns of cementless stem were known as proximal or distal part. Distal fixation was seen in fully porous coated stem and stress shielding of the proximal femur was indicative. These phenomena did not lower the clinical results, but technical difficulties were more and more in revision surgery because of infection or dislocation. There was lot of reports that alendronate was effective for treatment of osteoporosis by induction of apoptosis in osteoclasts. We can expect alendronate to modify the bone quality around the stem after cementless THA. Objectives. We studied prospectively that quantitative computed tomography (QCT) measured bone mineral density around the stem between alendronate group and control. We tried to clarify that stress shielding after cementless THA can be prevented by use of alendronate or not. Materials and methods. From September 2011, 60 patients underwent total hip arthroplasty with cementless stems. Thirty patients took alendronate (35mg/week) after surgery (Group A) and remaining 30 patients were control (Group C). Between two groups, gender, age at surgery, diagnosis and body mass index were similar. Two types of stem were used as Zweimuller type or taperlock type. Just after THA, femoral shaft divided by Gruen zone measured bone mineral density (BMD) with QCT and forearm also measured BMD by DEXA. Following examination was performed at 6 months, 12 months and 24 months after surgery. Results. Gender of two groups was as follow: four males and twenty-six females in Group A and two males and twenty-eight females in Group C. The age at surgery was 67.6+7.9y in group A and 62.5+13.3y in group C. Zweimuller type was used for 18 patients and taperlock type was used for 12 patients in group A. Zweimuller type was used for 14 patients and taperlock type was used for 16 patients in group C. BMD of forearm were not different between two groups and it meant that bone quality and osteoporosis of groups was similar. On the other hands, femoral BMD of group A was higher than that of group C. Especially BMD of group C was relatively low in zone 1 and 7. Conclusion. Weekly use of alendronate (35mg) might be useful for preventing stress shielding after cementless THA

Revision Total Hip Arthroplasty can be challenging in case of thin or fragile femur. Primary Bipolar Hip Prosthesis (BHP) is also difficult in severe osteoporosis case. We have used titanium alloy cementless stem with interlocking screws for revision THA since 2003, and primary BHP in senile case since 2007. Thirty four cementless THA were performed with interlocking stem (27 S-LOCK and 7 Delta-LOCK) since 2007, and 26 cases were followed for more than one year. Two for primary THA and 24 for revision THA, 3 were male and 23 were female. Seven primary Bipolar Hip Prosthesis with interlocking screw stem for femoral neck fracture were also followed more than one year. All seven BHP cases were female. Stress shielding in X-ray film were observed in 3 revision THA cases during follow up, but no pain were complained. No breakage of screws and stems were observed, and no infections and no fractures were occurred. In case of loosened stem, long interlocking stem can bypass the weak point of femur after removal of cement or metal stem tip. Patients can walk immediately after revision THA or primary BHP. Cementless interlocking stem in THA and BHP is useful for management of thin or fragile femoral cortex

Aims. To achieve the functional benefits of the direct anterior (DA) approach and the fixation benefits of cemented replacement, this study combined the two techniques posing the following questions: does the limited access of the DA approach adversely affect the cement technique?; and does such a cementing technique reduce the incidence of cementless complications?. Methods. A consecutive series of 341 patients (360 hips) receiving the DA approach between 2016 and 2018 were reviewed. There were 203 cementless stems and 157 cemented stems. Mean age was 75 years (70 to 86) in the cementless group and 76 years (52 to 94) in the cemented group, with 239 (70%) females in the whole series. Femoral complications were compared between the two groups. Mean follow-up was 1.5 years (0.1 to 4.4) for patients in the cementless group and 1.3 years (0.0 to 3.9) for patients in the cemented group. Results. The cementless group had a higher rate of femoral complications (8 vs 0; p = 0.011). There were two loose stems and six fractures, all requiring revision. Fractures occurred a mean 14.5 days (2 to 31) postoperatively and loosening at 189 days and 422 days postoperatively. Femoral cementing can be done using the DA approach safely and reduces the number of complications compared with a contemporary cementless series. Conclusion. A higher rate of early fractures and loosening occurred with cementless stems. This was not observed in our cemented stem cohort and cementing was safely accomplished through the DA approach. The modern femoral cementing process with the DA approach does not add to surgical complexity or time, has fewer early complications, and is a safer option for older patients compared to cementless femoral arthroplasties. Cite this article: Bone Joint J 2021;103-B(7 Supple B):33–37

Purpose: In-vitro mechanical tests are often used to pre-clinically assess the primary stability of hip endopros-theses. There is no standard protocol for these tests and the test conditions used vary greatly. This study examined the effect of the abductor muscle and the anterior-posterior component of the hip contact force (Fap) on the primary stability of cementless stems. Methods: Cementless stems were implanted in 12 composite femurs which were divided into two groups: group 1 (N=6) was loaded with the hip contact force only, whereas group 2 (N=6) was additionally subjected to an abductor force. The cranial-caudal component of the hip contact force was the same in both groups, i.e. 2.3BW at 13° from the femur long axis. Each specimen was subjected to three Fap levels: 0, 0.3BW (walking), and 0.6BW (stair climbing). The implant translation relative to the femur was measured using a custom-built system comprised of 6 LVDT sensors. The resultant migration and micromotion were analyzed using an ANOVA with the abductor a between-group factor and Fap a within-group factor, followed by SNK post-hoc analysis with a significance level of 95%. Results: Implant motion was not significantly affected when the Fap was increased from 0 to 0.3BW. However, without abductor, increasing Fap from 0.3 to 0.6BW increased migration and micromotion by an average of 291& #956;m (285% increase), and 15& #956;m (75%) respectively. With abductor, increasing Fap to 0.6BW increased migration by 87& #956;m (79%) but did not affect micromotion. The abductor did not significantly affect stem motion at lower Fap, but at Fap = 0.6BW motion was 50% lower compared with hip contact forces only. Conclusions: Based on these results, inclusion of either abductor and/or Fap has little effect on implant motion when simulating walking. However, stair climbing (higher Fap) generates greater bone-implant motion compared to walking loads, and this effect is greatest in the absence of an abductor force. Funding: Other Education Grant Funding Parties: The Michael Smith Foundation for Health Research

Introduction: There has been an introduction of short femoral stems with the aim of conserving bone. We present the short term results of short metaphyseal cement-less stem(Proxima. ®. , Depuy). Material and methods: 25 patients in age group (25–40yrs), 15 males,10 females were implanted with a short metaphyseal cementless stem (Proxima. ®. , Depuy) and cementless acetabular cup. The average follow up was 2.3 years (1.4–2.5 yrs). Clinical evaluation using Harris Hip Score, Radiological evaluation and Bone Mineral Density were evaluated at 2weeks, 6 months, 12 months and yearly thereafter. a new zonal method suitable for short stem was used for radiological evaluation. Results: The mean Harris Hip score improved from 44 to 95 at final follow up. There was no evidence of any radiolucent lines or osteolysis around the stems. All the stems showed evidence of osseointegration at one year follow up. There was no decrease in bone mineral density around the stems. Discussion: The Short Metaphyseal cementless femoral stem is a bone conserving as well as bone preserving option for young patients especially in those in whom surface replacement is not an option

Background:. Two-stage reconstruction, reimplantation after removal of an infected prosthesis, has been considered to be the gold standard for treatment of infected hip arthroplasty. However, during the removal of a well-fixed femoral stem, the proximal femur can be damaged and a sequestrum can be formed, which might lead to chronic osteomyelitis and difficulty in reimplantation. We wanted to determine whether infection after hip arthroplasty can be treated without removal of a well-fixed stem. Materials and Methods:. We treated 19 patients who had an infection after hip replacement, but a well-fixed cementless stem, with 2-stage reconstruction. At the first stage, we removed the acetabular cup, the liner and the head, but not the stem. We then implanted a cup of cement spacer. After control of infection, we reimplanted the acetabular component and head. Results:. 2 patients did not undergo second-stage reconstruction because they were satisfied with the pain relief and the activity that they had with the cement-spacer implantation. The remaining 17 patients underwent the second-stage of the reconstruction using cementless arthroplasty. At a mean follow-up time of 4 (2–8) years, 15 of the patients had no recurrence of infection, with satisfactory clinical and radiographic outcome. Discussion:. This second-stage reconstruction after retention of the stem could be an alternative treatment option for periprosthetic infection with a well-fixed stem

25 patients in age group (25–40yrs), 15 males, 10 females were implanted with a short metaphyseal cementless stem (‘Proxima’®, Depuy) and cementless acetabular cup. The average follow up was 2.3 years (1.4–2.5 yrs). Clinical evaluation using Harris Hip Score, Radiological evaluation and Bone Mineral Density were evaluated at 2weeks, 6 months, 12 months and yearly thereafter. a new zonal method suitable for short stem was used for radiological evaluation. The mean Harris Hip score improved from 44 to 95 at final follow up. There was no evidence of any radiolucent lines or osteolysis around the stems. All the stems showed evidence of osseointegration at one year follow up. There was no decrease in bone mineral density around the stems. The Short Metaphyseal cementless femoral stem is a bone conserving as well as bone preserving option for young patients especially in those in whom surface replacement is not an option

An anatomical cementless stem sometimes does not fit the femur of Japanese osteoarthritis (OA) patients due to deformity of the proximal femoral canal. In order to develop a new stem, we performed morphological analysis of 36 normal femora and 113 OA femora by using a computer aided design system and a three-dimensional canal fill ratio of anatomical stem was calculated. Thirty-six normal femora and 113 OA femora were reconstructed from 3D-CT data by using a computer aided design system. We analyzed each femur, and it became clear that there are 3 types of proximal femur in Japanese OA patients. In typeI, the configuration is the same as normal (42%). In typeII, the medial cortex is more steep (29%). In typeIII, the posterior cortex inclines anterior (26%). We chose 5 femora of the same size from each of the three types, and applied the anatomical stem of the most suitable size to each femur in the computer, we then calculated a three-dimensional canal fill ratio of the anatomical stem in the proximal portion of femoral canal. The mean canal fill ratio was 76.4% in typeI, 60.0% in typeII, and 57.2% in typeIII. The canal fill ratio in typeI was significantly higher than the other types. It is thought that to fill the proximal femoral canal with cementless stem is important to stabilize the stem and can lead to a good result. The anatomical stem fitted for the typeI, but did not fit for typeII and III, so we must consider developing a more suitable stem for typeII and typeIII

Abstract. Objective. To estimate the effect of calcar collar contact on periprosthetic fracture mechanics using a collared fully coated cementless femoral stem. Methods. Three groups of six composite femurs were implanted with a fully coated collared cementless femoral stem. Neck resection was increased between groups (group 1 = normal, group 2 = 3mm additional, group 3 = 6mm additional), to simulate failure to obtain calcar collar contact. Periprosthetic fractures of the femur were simulated using a previously published technique. Fracture torque and rotational displacement were measured and torsional stiffness and rotational work prior to fracture were estimated. High speed video recording identified if collar to calcar contact (CCC) occurred. Results between trials where calcar contact did and did not occur where compared using Mann-Whitney U tests. Results. Where CCC occurred versus where no CCC occurred, fracture torque was greater (47.33 [41.03 to 50.45] Nm versus 38.26 [33.70 to 43.60] Nm, p= 0.05), Rotational displacement was less (0.29 [0.27 to 0.39] rad versus 0.37 [0.33 to 0.49] rad, p= 0.07), torsional stiffness was greater (151.38 [123.04 to 160.42] rad. Nm-1 versus 96.86 [84.65 to 112.98] rad.Nm-1, p <0.01) and rotational work was similar (5.88 [4.67, 6.90] J versus 5.31 [4.40, 6.56] J, p= 0.6). Conclusions. Resistance to fracture and construct stiffness increased when a collared cementless stem made contact with the femoral calcar prior to fracture. These results demonstrate that calcar-collar contact and not a calcar collar per se, is crucial to maximising the protective effect of a medial calcar collar on the risk of post-operative periprosthetic fractures of the femur. Declaration of Interest. (a) fully declare any financial or other potential conflict of interest

The purpose of this study was to evaluate in vivo fit and fill analysis of tapered wedge-type stem in total hip arthroplasty (THA) with computed tomography (CT)-based navigation system. 100 THAs were all performed through the posterolateral approach, with patients in the lateral decubitus position. Each cohort of 50 consecutive primary cementless THAs with was compared with and without CT-based navigation system. The post-operative antero-posterior (AP) hip radiographs were obtained two weeks after the operation. All radiographic fit and fill measurements in the proximal and distal areas were analyzed by two of the authors who were both blinded to the use of CT-based navigation system. The type of the fit in the cementless stem was divided into three types. The fit of the stem was classified as Type I, if there was both proximal and distal engagement (maximum proximal to distal engagement difference of 2 mm or greater), Type II when there was proximal engagement only, and Type III when there was distal engagement only. The fill parameters such as mean stem-to-canal ratios and mean minimum and maximum gaps between the stems to the cortical bone in proximal and distal sections were compared. There was a significantly better overall canal fit obtained by THA with CT-based navigation system compared to without the navigation system (p<0.01). With CT-based navigation system, 42 of 50 stems (84%) were categorized as Type I fit compared to 31 of 50 stems (62%) without the navigation system. As to Type II fit, There are significantly more stems without the navigation system (26%) compared to with it (12%). There were better canal fills of the stems obtained by THA with CT-based navigation system both in proximal (94%) and distal sections (88%) of the femur compared to without the navigation system (proximal 88%/distal 82%) (p<0.05). Excellent radiographic fit and fill has been previously reported to potentially correlate with improved clinical outcomes. The stems obtained by THA with CT-based navigation system had a significantly better canal fit demonstrated by higher proportion of Type I and lower proportion of Type II fits, compared to without the navigation system. The stems with the navigation system had also significantly better proximal and distal canal fill

In recent years, the progressive technology of hemodialysis provides long-term survival for renal failure patients. On the other hand, avascular necrosis of the femoral head from the use of steroids or renal osteodystorophy or femoral neck fracture due to amyloid arthropathy have increased. In such cases, bipolar femoral head prosthesis (FHP) and total hip replacement (THR) are usually performed. But it is at risk of developing severe complications, such as early loosening or infection of the implant. The aim of this study is to evaluate the stability of the cementless stems in radiograms and clinical results after FHP or THR using three types cementless prosthesis in hemodialysis patients. The study included 14 patients (19 hips) on hemodialysis who underwent FHP or THR using three types cementless prosthesis at our institution between 1983 to 2005 and we could follow up at least two years. There were 8 women (11 hips) and 6 men (8 hips) with an average age of 43.9 years (range, 20–88). The average follow-up was 6.75 years. The average hemodialysis term was 10.5 years. Three types of hip prosthesis (7 stems were CLS, 6 stems were IMC, 6 stems were Duetto S-I) has been used for the treatment at our institution in the past. The initial diagnosis was avascular necrosis of the femoral head in 8 hips, femoral neck fracture in 5, osteoarthritis in 4 and amyloid arthropathy in two. We assessed at least 3° of varus-valgus deviation or at least 3 mm of subsidence as aseptic loosening of stems, and assessed radiolucent line and stress shielding of the stems in radiograms, also. As for clinical results, we measured postoperative infection rate and revision rate. Aseptic loosening of stems were identified in 3 hips (15.8%). Radiolucent lines were identified in 5%–26% of hips categolised by Gruen’s classification zone I-VII, although their zones differed according to the stem model. Stress shieldings were identified in 10 hips (53%), most of which were level 1, according to the criteria described by Engh et al. Infection rate and revision rate were 5.3% (1 hip) and it was a long-term hemodialysis patient. Several studies report, there is a high probability that early loosening of the stems is associated with amyloid deposition. We experienced early loosening of the stems in our case and considered prevention of amyloid deposition very important in improving the prognosis of the arthroplasty. We must follow carefully hemodialysis patients after an operation because their nutrition level is low and their bodies are compromised due to steroids use and their postoperative infection rate is high

Introduction. Resorptive bone remodeling secondary to stress shielding has been a concern associated with cementless total hip arthroplasty (THA). At present, various types of cementless implants are commercially available. The difference in femoral stem design may affect the degree of postoperative stress shielding. In the present study, we aimed to compare the difference in bone mineral density (BMD) change postoperatively in femurs after the use of 1 of the 3 types of cementless stems. Methods. Ninety hips of 90 patients who underwent primary cementless THA for the treatment of osteoarthritis were included in this study. A fit-and-fill type stem was used for 28 hips, a tapered-rectangular Zweymüller type stem was used for 32 hips, and a tapered-wedge type stem was used for 30 hips. The male/female ratio of the patients was 7/21 in the fit-and-fill type stem group, 6/26 in the tapered-rectangular Zweymüller type stem group, and 6/24 in the tapered-wedge type stem group. The mean age at surgery was 59.9 (39–80) in the fit-and-fill type stem group, 61.7 (48–84) in the tapered-rectangular Zweymüller type stem group and 59.6 (33–89) in the tapered-wedge type stem group. To assess BMD change after THA, we obtained dual-energy X-ray absorptiometry scans preoperatively and at 6, 12, 24, and 36 months postoperatively. Results. There were no differences in demographic data, such as gender, age at surgery, and body mass index, among the 3 groups (Table1). In terms of BMD change after THA, no differences were observed in Gruen zones 1–5 among the 3 groups during the 3-year follow-up. The BMD in Gruen zone 6 was maintained in the tapered-wedge type stem group, but decreased by 5% in the fit-and-fill type stem group and by 20% in the tapered-rectangular Zweymüller type stem group (p < 0.01). The BMD loss in Gruen zone 7 was observed in all stem types; however, the BMD loss at 36 months in the tapered-wedge type stem group (−15%) was significantly less than that of the other 2 groups (the fit-and-fill type stem group: −29%; the tapered-rectangular Zweymüller type stem group: −30%; p < 0.001 for both groups) (Figure). Discussion and Conclusion. A difference in postoperative BMD loss was observed among the 3 stem designs. This may be a result of the different fixation concept associated with each stem design. In the present study, we compared the postoperative BMD change after THA among a fit-and-fill type stem, a tapered-rectangular Zweymüller type stem, and a tapered-wedge type stem. BMD in the medial-proximal femur was maintained 3 years after THA in the group with the tapered-wedge type stem, which is fixed in a more proximal part of the femur compared to the other stems

Introduction: Immediate postoperative stability of cementless hip stems is one of the key factors for the long-term success of total hip replacement. The ability to discriminate between stable and unstable stems in the laboratory constitutes a desirable tool for the industry, as it would allow the identification of unsuitable stem designs prior to clinical trials. The use of composite femora for stability investigations is wide spread [. 1. ,. 2. ] even though their use in this application is yet to be validated. This study is aimed at establishing whether Sawbones composite femora are suitable for the assessment of migration and micromotion of a cementless hip stem. The stability of two SL Plus stems (Precision Implants, CH) implanted into Sawbone was compared to that of two SL Plus stems implanted into cadaveric femora. Ethical approval was obtained for the harvest and use of cadaveric material. Methods: Stability was assessed in terms of micromotion and migration. Micromotion was defined as the recoverable movement of the implant relative to the bone under cyclic loading. Migration was defined as the non-recoverable movement of the implant with respect to the surrounding bone. Movement of the implant with respect to the surrounding bone was monitored at two locations on the lateral side of the stem by means of two custom made transducers based on the concept described by Berzins et al [. 3. ]. Each femur was tested in two different sinusoidal loading configurations: single leg stance (SLS-11° of adduction and 7° of flexion) [. 4. ] loaded up to 400N and stair climbing (SC-11° of adduction and 32° of flexion) loaded up to 300N. The effect of the abductor muscles was included in the model [. 5. ]. Each test consisted of 200 loading cycles applied at 50 Hz. The captured data was post-processed by a MATLAB routine and converted into translations and rotations of the stem with respect to the bone. Results: The proximal part of the implant was subject to the highest amplitudes of micromotion in both loading configurations independent of the host. During SLS the largest micromotion was measured in the direction of the axis of the femur, this amplitude was in the order of 20 μm for the stems implanted in sawbones and varied between 13 and 39 μm for the stems implanted in cadaveric femora. The migration of the implants was minimal both in SLS and SC for both hosts with values measured in the sawbones model nearly on order of magnitude smaller than the cadaveric. In the case of SLS the prevalent movement consisted of a translation along the axis of the bone, while during SC the rotations became prevalent. Discussion: This study has demonstrated that Sawbones provide an effective model to establish micromotion with oscillation patterns and orders of magnitiude similar to cadaveric bone. However the migration is much more dependent on the quality of fit and the internal geometry of the femur and therefore more caution should be placed on interpreting migration data from Sawbones models

Background: Poor results were observed at medium term follow-up (FU) after first and second generation cementless stems implantation in total hip arthroplasty (THA). Revision rate up to 24% is reported with anatomic stems; stress-shielding rate up to 50%, thigh pain rate up to 21%, loosening rate up to 20% and osteolysis rate up to 29% were reported with cylindrical stems. A third generation tapered stem, the Synergy stem, was introduced in 1996 to rise such weakness points. Material and methods: A retrospective, cohort study was carried out in two academic centers (London, Toronto, Canada & Rome, Italy) on 232 primary THA in 215 patients with a 10 to 12 yrs FU. Mean age at surgery was 60 yrs (18–82), 95 patients were males and 120 females. Thirty-six patients were lost at FU (13 died before the 10 yrs mark, 22 changed residency, 1 not willing to be seen) with no problems related to the replaced hip. Remained at FU 196 THA. Patients selection: Dorr type A and B femurs suitable for receive a Synergy stem. Its characteristics are the following: Ti-6Al-4V, straight, tapered, 3D wedge cross-section, proximal antirotational fins, low-profile neck, neck angle 131°, metaphyseal part porous or HA coated, diaphyseal part grit blasted, polished tip, surgeon-friendly ancillary instruments. Clinical results of the 196 THA with more than 10 yrs of FU were assessed preoperatively and postoperatively at 5 and 10 or 11 or 12 yrs by means of standard evaluation tools: SF12, WOMAC and Harris Hip Score. Thigh pain frequency and intensity were also scored. Radiographic analysis was focused on stem alignment, bone ingrowth, radiolucent lines presence, width and progression, stress-shielding, heterotophic ossification (HTO). Student paired test and Kaplan-Meier survival analysis were used for statistical analysis. Results: All clinical evaluation tools showed both at 5 years FU and at latest FU (10–12 years) a statistically significant (p=0,001) improvement compared to the preoperative scores. We observed a not constant thigh pain in 7 patients (5,5%). Nineteen patients (10%) underwent evision due to polyethylene wear (6 cases), late periprosthetic fracture (5 cases), subsidence (2 cases), instability (3 cases), infection (3 cases). Cumulative survival rate was 97% at 2 and 5 years, 90% at 10 years. Stem related revisions were the 2 cases of subsidence, both related to occult intraoperative calcar crack and early revised (within 1 year); cumulative stem-related survival rate at 10 years was 99%. Alignment was varus in 9 cases and valgus in 3. Bone in-growth was observed in 194 patients (98%). Radiolucent lines were uncommon, non progressive, less than 2 mm, in Gruen zones 2 and 6. Stress-shielding was present as cortical reaction in 5 femurs in Gruen zones 3 and 5. Thirty-four cases of HTO (grade I and II in 27 case and grade III in 7 cases) were observed. Conclusions: The Synergy stem demonstrates excellent clinical and radiographic results at 10–12 yerars FU in 196 patients. Survivorship (with stem revision as end point) is 99% at 10 years. Thigh pain is uncommon and the level of activity and autonomy is excellent. Radiographically bone ingrowth is evident in all stems and radiolucent lines are “benign” with no aseptic loosening. Attention must be paid at the moment of stem press fit insertion to avoid occult proximal femoral fractures that may require revision surgery