Aims. Limb-lengthening nails have largely replaced external fixation in limb-lengthening and reconstructive surgery. However, the adverse events and high prevalence of radiological changes recently noted with the STRYDE lengthening nail have raised concerns about the use of internal lengthening nails. The aim of this study was to compare the prevalence of radiological bone abnormalities between STRYDE, PRECICE, and FITBONE nails prior to nail removal. Methods. This was a retrospective case series from three centres. Patients were included if they had either of the three limb-lengthening nails (STYDE, PRECICE, or FITBONE) removed. Standard orthogonal radiographs immediately prior to nail removal were examined for bone abnormalities at the junction of the telescoping nail parts. Results. In total, 306 patients (168 male, 138 female) had 366 limb-lengthening nails removed. The mean time from nail insertion to radiological evaluation was 434 days (36 to 3,015). Overall, 77% of STRYDE nails (20/26) had bone abnormalities at the interface compared with only 2% of FITBONE (4/242) and 1% of PRECICE nails (1/98; p < 0.001). Focal osteolysis in conjunction with periosteal reaction at the telescoping interface was only observed in STRYDE nails. Conclusion. Bone abnormalities at the interface of telescoping nail parts were seen in the majority of STRYDE nails, but only very rarely with FITBONE or PRECICE nails. We conclude that the low prevalence of radiological changes at the junctional interface of 242 FITBONE and 98 PRECICE nails at the time of nail removal does not warrant clinical concerns. Cite this article: Bone Joint J 2021;103-B(11):1731–1735

Introduction. Metabolic bone disease encompasses disorders of bone mineralization, abnormal matrix formation or deposition and alteration in osteoblastic and osteoclastic activity. In the paediatric cohort, patients with metabolic bone disease present with pain, fractures and deformities. The aim was to evaluate the use of lateral entry rigid intramedullary nailing in lower limbs in children and adolescents. Materials and Methods. Retrospective review was performed for an 11-year period. Lower limb rigid intramedullary nailing was performed in 27 patients with a total of 63 segments (57 femora, 6 tibiae). Majority of patients had underlying diagnoses of osteogenesis imperfecta or fibrous dysplasia (including McCune Albright disease). Mean age at surgery was 14 years. Indications for surgery included acute fractures, prophylactic stabilisation, previous nonunion and malunion, deformity correction and lengthening via distraction osteogenesis. Results. All fractures healed. Correction of deformity was successfully achieved in all segments. Delayed union occurred in 4 segments in 1 patient and was successfully treated with nail dynamization. Other complications included prominence, cortical penetrance and loosening of locking screws. One patient who had lengthening performed had nonunion and was managed with exchange nailing and adjunctive measures. Conclusions. Rigid intramedullary nailing is very effective in stabilisation and deformity correction of long bones in adolescent patients with pathological bone disease. The technique has low complication rates. We recommend the use of this technique in paediatric units with experience in managing metabolic bone conditions

Aims

The preventive effects of bisphosphonates on articular cartilage in non-arthritic joints are unclear. This study aimed to investigate the effects of oral bisphosphonates on the rate of joint space narrowing in the non-arthritic hip.

Osteoarthritis (OA) is a highly prevalent degenerative joint disorder characterized by joint pain and physical disability. Aberrant subchondral bone induces pathological changes and is a major source of pain in OA. In the subchondral bone, which is highly innervated, nerves have dual roles in pain sensation and bone homeostasis regulation. The interaction between peripheral nerves and target cells in the subchondral bone, and the interplay between the sensory and sympathetic nervous systems, allow peripheral nerves to regulate subchondral bone homeostasis. Alterations in peripheral innervation and local transmitters are closely related to changes in nociception and subchondral bone homeostasis, and affect the progression of OA. Recent literature has substantially expanded our understanding of the physiological and pathological distribution and function of specific subtypes of neurones in bone. This review summarizes the types and distribution of nerves detected in the tibial subchondral bone, their cellular and molecular interactions with bone cells that regulate subchondral bone homeostasis, and their role in OA pain. A comprehensive understanding and further investigation of the functions of peripheral innervation in the subchondral bone will help to develop novel therapeutic approaches to effectively prevent OA, and alleviate OA pain.

Cite this article: Bone Joint Res 2022;11(7):439–452.

CT-based three-dimensional (3D) pre-operative imaging along with 2D orthogonal sections defined by the plane of the scapula (axial, sagittal and coronal planes) has been demonstrated by many research groups to be a very accurate way to define the bone pathology and alignment/subluxation of the humeral head in relationship to the center line of the scapula or the center of the glenoid fossa. When 3D CT imaging is combined with 3D implant templating the surgeon is best able to define the optimal implant and its location for the desired correction of the bone abnormalities. The use and value of 3D imaging is best when the there is more severe bone pathology and deformity. Transferring the computer-based information of implant location to the surgical site can involve multiple methods. The three methods discussed in the literature to date including use of standard instrumentation in a manner specified by the pre-operative planning, use of single-use patient specific instrumentation and use of reusable patient specific instrumentation. Several cadaver and sawbone studies have demonstrated significant improvement in placement of the glenoid implant with both single use and reusable patient specific instrumentation when compared to use of 2D imaging and standard instrumentation. Randomised clinical trials have also shown that 3D planning and implant templating is very effective in accurate placement of the implant in the desired location using all three types of instrumentation. The optimal use of this technology is dependent upon the severity of the pathology and the experience and preference of the surgeon. With more severe pathology and less surgeon experience 3D pre-operative imaging and templating and use of some level of patient specific instrumentation provides more accurate placement of the glenoid implant

Aims

To investigate whether idiopathic osteonecrosis of the femoral head (ONFH) is related to impaired osteoblast activities.

INTRODUCTION:. Previous modalities such as static x-rays, MRI scans, CT scans and fluoroscopy have been used to diagnosis both soft-tissue clinical conditions and bone abnormalities. Each of these diagnostic tools has definite strengths, but each has significant weaknesses. The objective of this study is to introduce two new diagnostic, ultrasound and sound/vibration sensing, techniques that could be utilized by orthopaedic surgeons to diagnose injuries, defects and other clinical conditions that may not be detected using the previous mentioned modalities. METHODS:. A new technique has been developed using ultrasound to create three-dimensional (3D) bones and soft-tissues at the articulating surfaces and ligaments and muscles across the articulating joints (Figure 1). Using an ultrasound scan, radio frequency (RF) data is captured and prepared for processing. A statistical signal model is then used for bone detection and bone echo selection. Noise is then removed from the signal to derive the true signal required for further analysis. This process allows for a contour to be derived for the rigid body of questions, leading to a 3D recovery of the bone. Further signal processing is conducted to recover the cartilage and other soft-tissues surrounding the region of interest. A sound sensor has also been developed that allows for the capture of raw signals separated into vibration and sound (Figure 2). A filtering process is utilized to remove the noise and then further analysis allows for the true signal to be analyzed, correlating vibrational signals and sound to specific clinical conditions. RESULTS:. Numerous tests have been conducted using this ultrasound technique to create 3D bones compared more traditional techniques, MRI and CT Scans. These tests have shown repeatedly that 3D bones can be created with an error less than 1.0 mm. Soft-tissues at the joint of question are also created with a high accuracy. Sound signals have been analyzed and correlated to specific knee and hip clinical pathology as well as complications after Total Joint Arthroplasty. Sounds such as squeaking, knocking, grinding, clicking and even a rusty door hinge have been recovered during weight-bearing activities. DISCUSSION:. Both CT scans and x-rays emit radiation, and static CT scans and MRI scans are conducted under non weight-bearing conditions. These two new orthopaedic diagnostic techniques, ultrasound and sound, allow a surgeon to make clinical diagnoses while the patient is performing weight-bearing, dynamic activities, while not being subjected to harmful radiation. Sound analyses allow for support of the ultrasound and physical exam that can lead to enhanced diagnostics that are not possible using only a visual based analysis. Early results are promising for both of these new diagnostic techniques. This study revealed that weight-bearing, dynamic diagnoses can be made by an orthopaedic surgeon and could have distinct advantages compared to traditional techniques

Posterior segmental fixation of the cervical spine facilitates fixation in sub-optimal bone, abnormal anatomy, and complex deformity. Compared to lateral mass plates a screw rod construct provides a stable construct in osteoporotic bone or in cases where the lateral masses are fractured or missing. To investigate whether a posterior cervical screw- rod construct is an effective, stable and safe means of posterior cervical fixation. Retrospective evaluation of consecutive patients undergoing a posterior cervical stabilization with a screw- rod construct with clinical and radiographic evaluation. Clinical variables included age, gender, neurologic status, surgical indication, number of levels stabilized, and number of screws. Note was made as to whether a laminectomy was performed and concomitant anterior surgery. Clinical and radiographic assessments were carried out immediately after surgery and at six weeks, three, six, twelve months and annually after surgery. Eighty-three patients had five hundred and seventy-three screws placed from October 1998 to December 2003. Mean patient age was fifty-seven. Mean follow-up was twenty-three months, (one to sixty months). The underlying diagnoses were inflammatory arthritis thirty-three, spondylotic myelopathy twenty-nine and trauma in twenty-one patients. Forty-four patients (53% had motor deficit, forty-seven patients (57%) had sensory deficit. Fixation was carried out over an average of five levels (range – two to eight). Mean number of screws per construct was seven (range – four to fourteen). The instrumentation was successfully implanted in all despite lateral mass deficiencies (fracture, poor bone) and coronal and sagittal plane deformities. Late occipital fixation failure was encountered in one patient. There was no loss of alignment or surgical correction on follow-up radiographs. A posterior screw-rod system allows for treatment of traumatic and degenerative and inflammatory conditions. Crossing the occipitocervical or cervicothoracic junctions is easily afforded. We have had excellent success without complications from screw placement or pseudoarthrosis

1. In congenital absence of the fibula, the fibrous strip that replaces the bone, abnormal insertions of fibular muscles, and disturbances in the formation and growth of the tarsal bones all go to cause the valgus deformity of the foot and the complete or partial dislocation of the talo-tibial joint. 2. Conservative treatment is justified only for children less than a year old and then only as preparation for operation. 3. Between the second and seventh year of life operations upon the soft tissues are indicated, to eliminate the contractures occurring on the posterior and lateral sides, to restore the proper position of the foot in line with the axis of the tibia, and to restore the normal shape of the foot and muscular equilibrium. At the same time favourable conditions are created for operative reconstruction of the lateral malleolus. 4. Arthrodesis of the talo-tibial joint or reconstruction of the lateral malleolus by a bone graft with the aim of stabilising the foot in the axis of tibia is not advisable in the growing limb. 5. The results obtained in three cases described support the conclusion that the bifurcation operation recommended by Gruca produces a new lateral malleolus with an epiphysis that grows at the same rate as the remainder of the lower epiphysis of the tibia, does not affect the rate of growth of the tibial epiphysis, prevents the recurrence of the deformity, and preserves the mobility of the talo-tibial joint. 6. In early cases this reconstructive operation may be done at the same time as soft-tissue deformities are corrected and subluxation reduced. 7. It is probable that the bifurcation operation should be done on children aged between two and seven years in order to give the limb the best chance to develop normally

1. Léri's pleonosteosis is characterised by broadening and deformity of the thumbs and great toes, flexion contracture of the interphalangeal joints, limited movement of other joints, and often a Mongoloid facies. Four such cases are described. 2. A review of the twenty reports in the literature, and the cases now described, shows that the deformities are due to capsular contracture rather than deformity of bone. 3. In one patient there was striking evidence of fibro-cartilaginous thickening of the anterior carpal ligaments. It is suggested that the primary pathological change in pleonosteosis may be in the joint capsules rather than in the epiphyses. 4. The patient with thickening of the anterior carpal ligaments had bilateral median palsy from carpal tunnel compression. 5. The causes of carpal tunnel compression of the median nerve are reviewed. Acute compression may be due not only to dislocation of the semilunar bone but to haemorrhage in the palm. Late compression by bone may occur twenty to fifty years after injury. Late compression without bone abnormality has been attributed to occupational stress, but it is suggested that pathological thickening of the anterior carpal ligament may be the cause. 6. The patient with pleonosteosis and bilateral median palsy had also bilateral Morton's metatarsalgia with large digital neuromata. 7. Plantar digital neuritis has already been shown to be an ischaemic nerve lesion preceded by degenerative changes in the digital artery. The significance of the fibrous tunnel through which the artery passes to reach the digital cleft is considered

It is well appreciated that thigh pain following recent arthroplasty surgery is likely to be due to prosthetic loosening or infection. Both these sequelae can lead to periprosthetic fracture presenting complex challenges to even experienced surgeons. Revision arthroplasty patients are prone to both fatigue and insufficiency fractures as they may have reduced bone stock after previous surgery and reduced bone density secondary to medical and immobility reasons. The post operative painfree condition will frequently permit early load bearing leading to a relatively rapid increase in activity and load bearing. Fatigue fractures occur in bone of normal quality subject to abnormal cyclical overloading, leading to resorption and eventual failure, before adequate time has passed to permit adaptive remodelling. Insufficiency fractures occur when normal physiological loads are applied to bone of abnormal quality. Surprisingly few periprosthetic stress fractures are reported in the literature but a series notes lateral tensile stress fractures associated with varus prosthetic alignment. These all occurred near the tip of the prosthesis. The case of an unusual Gruen Zone 2, Vancouver B1 stress fracture, 9 months following revision arthroplasty is reported. Initially loosening was suspected due to the development of load bearing thigh pain. Plain radiography revealed the development of a dreaded black line, consistent with a stress fracture. Bone scintigraphy revealed the typical appearance of a stress fracture in the absence of loosening or infection. The unusual location of this stress fracture allowed consideration of conservative non weight bearing management which lead to the alleviation of symptoms rather than further revision surgery. This report illustrates this unusual stress fracture and highlights the importance of careful loading practises to permit adequate remodelling following complex revision surgery

Objectives

Little is known about tissue changes underlying bone marrow lesions (BMLs) in non-weight-bearing joints with osteoarthritis (OA). Our aim was to characterize BMLs in OA of the hand using dynamic histomorphometry. We therefore quantified bone turnover and angiogenesis in subchondral bone at the base of the thumb, and compared the findings with control bone from hip OA.

Increased incidence of complications has been reported when lengthening limbs with underlying bone disorders such as dysplasias and metabolic bone diseases. There is a paucity of literature on limb lengthening in Osteogenesis Imperfecta (OI), probably due to the concern that the bone containing abnormal collagen may not tolerate the external fixators for a long term and there may not be adequate regenerate formation from this abnormal bone. We performed limb lengthening and deformity correction of nine lower limb long bones in six children with OI. Four children were type I and two were type IV OI as per Sillence classification. The mean age was 14.7 years. All six children had lengthening for femoral shortening and three of them also had lengthening for tibial shortening on the same side. Angular deformities were corrected during lengthening. Five limb segments were treated using a monolateral external fixator and four limb segments were treated using an Ilizarov external fixator. In three children, previously inserted femoral intramedullary nails were left in situ during the course of femoral lengthening. The average lengthening achieved was 6.26 cm. Limb length discrepancies were corrected to within 1.5 cm of the length of the contralateral limb in five children. In one child with fixed pelvic obliquity and spinal scoliosis, functional leg length was achieved. The mean healing index was 33.25 days/cm of lengthening. Among the complications significant ones included, one deep infection, one fracture through the midshaft of the femur, and development of anterior angulation deformity after the removal of the fixator in one tibia. Abnormal bone of OI tolerated the external fixator throughout the period of lengthening without any incidence of migration of wires and screws through the soft bone when distraction forces were applied. The regenerate bone formed within the time that is normally expected in limb lengthening procedures performed for other conditions. We conclude that despite abnormal bone characteristics, limb reconstruction to correct limb length discrepancy and angular deformity can be done safely in children with OI

When large daily doses of vitamin D were administered to rats endochondral growth was inhibited and bone resorption occurred; later in the process uncalcified matrix (osteoid) like that seen in rickets formed on trabecular margins. When vitamin D was given only for a short period and then discontinued, little resorption of bone was seen during the withdrawal period and wide seams of osteoid material appeared which eventually calcified in an irregular manner. When normal endochondral growth was resumed a wide transverse band of dense bone with enclosed cartilaginous cores was left in the marrow cavity. If, after a few days, a second large dose of the vitamin was given resorption again occurred and calcification of osteoid material was accelerated, the first microscopic sign being a dense, wide, granular, deeply staining line at the junction of the bone and new osteoid. After a second withdrawal period a second layer of osteoid formed; eventually another transverse band appeared in the metaphysis. If this hypervitaminosis D cycle (+4 -12) was continued rats continued to form new bone with relatively little remodelling, so that after three such cycles bones became dense and hard. Histological study showed that little marrow cavity remained in either skull, vertebrae or epiphyses and a dense mass of bone enclosing cartilage cores filled the metaphysial part of the long bones. In addition, ankylosis ofteeth, calcification of spinal ligaments and widespread metastatic calcification were present. When hypervitaminosis D cycles (+1 -12, +1 -21) were adjusted to produce minimal resorptive changes a wide range of bone change was observed. This varied from uniform dense metaphysial bone containing abnormal cartilage matrix arranged in longitudinal striations, dense transverse bands parallel to the epiphysial cartilage, to remnants of dense trabeculae extending into the marrow cavity. Bone changes in osteopetrosis structurally closely resembled the induced bone changes in the rat. It is concluded that an important mechanism in the production of osteopetrosis is an accentuated rhythm of bone change like that shown experimentally to be produced in these animals. It is emphasised that these changes are but part of a range of bone disorders associated with abnormalities of cycles of resorption and deposition of bone, the type of change differing with the nature of the cycles

Objectives

An important measure for the diagnosis and monitoring of knee osteoarthritis is the minimum joint space width (mJSW). This requires accurate alignment of the x-ray beam with the tibial plateau, which may not be accomplished in practice. We investigate the feasibility of a new mJSW measurement method from stereo radiographs using 3D statistical shape models (SSM) and evaluate its sensitivity to changes in the mJSW and its robustness to variations in patient positioning and bone geometry.

Aims

There are many guidelines that help direct the management of patients with metal-on-metal (MOM) hip arthroplasties. We have undertaken a study to compare the management of patients with MOM hip arthroplasties in different countries.

There is an increased risk of fracture following osteoplasty of the femoral neck for cam-type femoroacetabular impingement (FAI). Resection of up to 30% of the anterolateral head–neck junction has previously been considered to be safe, however, iatrogenic fractures have been reported with resections within these limits. We re-evaluated the amount of safe resection at the anterolateral femoral head–neck junction using a biomechanically consistent model.

In total, 28 composite bones were studied in four groups: control, 10% resection, 20% resection and 30% resection. An axial load was applied to the adducted and flexed femur. Peak load, deflection at time of fracture and energy to fracture were assessed using comparison groups.

There was a marked difference in the mean peak load to fracture between the control group and the 10% resection group (p < 0.001). The control group also tolerated significantly more deflection before failure (p < 0.04). The mean peak load (p = 0.172), deflection (p = 0.547), and energy to fracture (p = 0.306) did not differ significantly between the 10%, 20%, and 30% resection groups.

Any resection of the anterolateral quadrant of the femoral head–neck junction for FAI significantly reduces the load-bearing capacity of the proximal femur. After initial resection of cortical bone, there is no further relevant loss of stability regardless of the amount of trabecular bone resected.

Based on our findings we recommend any patients who undergo anterolateral femoral head–neck junction osteoplasty should be advised to modify their post-operative routine until cortical remodelling occurs to minimise the subsequent fracture risk.

Cite this article: Bone Joint J 2015;97-B:1214–19.

Follow-up radiographs are usually used as the reference standard for the diagnosis of suspected scaphoid fractures. However, these are prone to errors in interpretation. We performed a meta-analysis of 30 clinical studies on the diagnosis of suspected scaphoid fractures, in which agreement data between any of follow-up radiographs, bone scintigraphy, magnetic resonance (MR) imaging, or CT could be obtained, and combined this with latent class analysis to infer the accuracy of these tests on the diagnosis of suspected scaphoid fractures in the absence of an established standard. The estimated sensitivity and specificity were respectively 91.1% and 99.8% for follow-up radiographs, 97.8% and 93.5% for bone scintigraphy, 97.7% and 99.8% for MRI, and 85.2% and 99.5% for CT. The results were generally robust in multiple sensitivity analyses. There was large between-study heterogeneity for the sensitivity of follow-up radiographs and CT, and imprecision about their sensitivity estimates.

If we acknowledge the lack of a reference standard for diagnosing suspected scaphoid fractures, MRI is the most accurate test; follow-up radiographs and CT may be less sensitive, and bone scintigraphy less specific.

Improvements in the surgical technique of total knee replacement (TKR) are continually being sought. There has recently been interest in three-dimensional (3D) pre-operative planning using magnetic resonance imaging (MRI) and CT. The 3D images are increasingly used for the production of patient-specific models, surgical guides and custom-made implants for TKR.

The users of patient-specific instrumentation (PSI) claim that they allow the optimum balance of technology and conventional surgery by reducing the complexity of conventional alignment and sizing tools. In this way the advantages of accuracy and precision claimed by computer navigation techniques are achieved without the disadvantages of additional intra-operative inventory, new skills or surgical time.

This review describes the terminology used in this area and debates the advantages and disadvantages of PSI.

We report the findings of an independent review of 230 consecutive Birmingham hip resurfacings (BHRs) in 213 patients (230 hips) at a mean follow-up of 10.4 years (9.6 to 11.7). A total of 11 hips underwent revision; six patients (six hips) died from unrelated causes; and 13 patients (16 hips) were lost to follow-up. The survival rate for the whole cohort was 94.5% (95% confidence interval (CI) 90.1 to 96.9). The survival rate in women was 89.1% (95% CI 79.2 to 94.4) and in men was 97.5% (95% CI 92.4 to 99.2). Women were 1.4 times more likely to suffer failure than men. For each millimetre increase in component size there was a 19% lower chance of a failure. The mean Oxford hip score was 45.0 (median 47.0, 28 to 48); mean University of California, Los Angeles activity score was 7.4 (median 8.0, 3 to 9); mean patient satisfaction score was 1.4 (median 1.0, 0 to 9). A total of eight hips had lysis in the femoral neck and two hips had acetabular lysis. One hip had progressive radiological changes around the peg of the femoral component. There was no evidence of progressive neck narrowing between five and ten years.

Our results confirm that BHR provides good functional outcome and durability for men, at a mean follow-up of ten years. We are now reluctant to undertake hip resurfacing in women with this implant.