Background. Total knee arthroplasty (TKA) is an effective surgical procedure to alleviate excruciating pain and correct dysfunction due to severe knee deformity. The satisfaction rate with current TKA is 80%, While 20% of the patients report uncomfortable feeling during stair descending and deeply knee bending. Preserving the ligaments might allow a restoration close to the natural function, although sacrifice of the ACL is common with the conventional TKA technique. The current
A bicruciate retaining (BCR) TKA is thought to maintain a closer resemblance to the native knee kinematics compared to a posterior cruciate retaining (CR) TKA. With BCR TKAs retainment of the anterior cruciate ligament (ACL) facilitates proprioception and balance which is thought to lead to more natural knee kinematics and increased functional outcome. The aim of this study was to quantify and compare the kinematics of a BCR and CR TKA during functional tests. In this patient-blinded randomized controlled trial, a total of 40 patients with knee osteoarthritis were included, 18 of them received a BCR TKA (Vanguard XP, Zimmer-Biomet) and 22 received a CR TKA (Vanguard CR, Zimmer-Biomet). Fluoroscopic analysis was done 1 year post-operatively. The main outcome was posterior femoral rollback (i.e. translation of the femorotibial contact point (CP)) of the BCR and CR TKA during a step-up test. Secondary, the kinematics during a lunge test were quantified as anterior-posterior (AP) translation of the femorotibial CP. Independent student t-tests (or non-parametric equivalent) were used to analyze the effect of BCR versus CR TKA on these measures, to correct for the multiple testing problem post-hoc Bonferroni-Holm corrections were applied.Introduction
Materials and Methods
Total knee arthroplasty (TKA) was primarily considered a successful procedure, several new knee implants were introduced in recent years that seek to obtain improved stability and higher flexion. One of the implant, Vanguard XPTM BiCruciate retaining (BCR), Zinmmer-Biomet, USA recreates a specific kinematic model through the principle of normal joint. An unselected consecutive series of sixty-two patients undergoing primary TKA using the cemented total knee system between August 2016 and April 2018 were studied. Twenty-seven knees was operated using Vanguard XP, subsequently thirty-five knees were received a TKA using cruciate retaining cemented total knee system FINETMCR, Nakashimamedical, Japan. Postoperatively standing AP hip-to-ankle radiographs were obtained, from which the lower extremity mechanical axis, component angle were measured. The alignment goals were a neutral mechanical axis defined as a hip-to-ankle angle of 0°with the femoral and tibial components aligned perpendicular to the mechanical axis. The total operating time were quantified utilising an operating room database. The total operating time between TKAs performed with Vanguard XP BCR and those performed with FINE CR was compared in each group. All patients postoperatively was evaluated of clinical results the Japan Orthopedics Association(JOA) Knee scores. We evaluated femoral component posterior offset (PFCO) in both of two group. The maximal protrusion of the posterior condyle, posteriorly to the extension line parallel to the tibial shaft from the edge of the posterior tibial component was measured on true lateral radiographs.Background
Patients and Method
Bicruciate ligament retaining total knee arthroplasty preserves all of the ligaments of the knee while still addressing the ligament balance and the flexion-extension gaps. The concept of cruciate ligament preservation is not new and both Townley and Cartier designed prostheses in the late 1980s that did preserve all of the ligaments. Their results were quite acceptable for that time in knee replacement surgery but the posterior stabilised and cruciate retaining designs controlled most of the market. The surgical technique for cruciate ligament preservation was more difficult, and without clear clinical benefit, most surgeons gravitated towards the cruciate retaining and posterior stabilised designs. In the late 1990s, evaluation of the total knee arthroplasty began to assess knee kinematics in addition to pain and functional outcomes. At the same time, studies on the unicondylar knee arthroplasty demonstrated impressive scores in motion and patient satisfaction with preservation of all of the ligamentous structures of the knee. Over the past two years, new designs that preserve all of the ligaments of the knee have returned to the market. The instruments have been improved and the prostheses have been changed to respect the kinematics of the knee. Fifteen to twenty percent of all total knee replacement patients are not completely satisfied with the surgery and the authors believe that complete ligament preservation may address this complaint.
The goals of a total knee arthroplasty include approximation of the function of a normal knee and achievement of balance post-surgery. Accurate bone preparation and the preservation of natural ligaments along with a functional knee design, holds the potential to provide a method of restoring close to normal function. Although conventional knee arthroplasty is considered a successful intervention for end-stage osteoarthritis, some patients still experience reduced functionality and in some cases, require revision procedures. With conventional manual techniques, accurate alignment of the tibial component has been difficult to achieve. Even in the hands of skilled knee surgeons, outliers beyond 2 degrees of the desired alignment may occur in as many as 40%-60% of cases using conventional methods, and the range of component alignment varies considerably. Similarly, for total knee replacement outliers beyond 2 degrees of the desired alignment may occur in as many as 15% of cases in the coronal plane, going up to 40% of unsatisfactory alignment in the sagittal plane. Robotics-assisted arthroplasty has gained increasing popularity as orthopaedic surgeons aim to increase accuracy and precision of implant positioning. With advances in computer generated data, with image free data, surgeons have the ability to better predict and influence surgical outcomes. Based on planned implant position and soft tissue considerations, robotics-assisted systems can provide surgeons with virtual tools to make informed decisions for knee replacement, specific to the needs of the patient. Here, for the first time in a live surgical setting, we assess the accuracy and technique of a novel imageless semiautonomous handheld robotic surgical technique in bi-cruciate retaining total knee arthroplasty (Navio, Smith and Nephew). The system supports image-free anatomic data collection, intraoperative surgical planning and execution of the plan using a combination of robotic burring and saw cut guides.
Many fluoroscopic studies on total knee arthroplasty (TKA) have identified kinematic variabilities compared to the normal knee, with many subjects experiencing paradoxical motion patterns. The intent of this study was to investigate the results of a newly designed PCR TKA to determine kinematic variabilities and assess these kinematic patterns with those previously documented for the normal knee. The study involves determining the in vivo kinematics for 80 subjects compared to the normal knee. 10 subjects have a normal knee, 40 have a Journey II PCR TKA and 40 subjects with the Journey II XR TKA (BCR). Although all PCR subjects have been evaluated, we are continuing to evaluate subjects with a BCR TKA. All TKAs were performed by a single surgeon and deemed clinically successful. All subjects performed a deep knee bend from full extension to maximum flexion while under fluoroscopic surveillance. Kinematics were calculated via 3D-to-2D registration at 30° increments from full extension to maximum flexion. Anterior/posterior translation of the medial (MAP) and lateral (LAP) femoral condyles and femorotibial axial rotation were compared during ranges of motion in relation to the function of the cruciate ligaments.Introduction
Methods
Introduction. A common problem for patients receiving total knee arthroplasty (TKA) is postoperative functional impairment of the joint. This is minimized in
Anterior cruciate ligament (ACL)-retaining total knee arthroplasty (TKA) has been associated with more physiologic motion patterns, more normal knee kinematics, and higher patient preference than ACL-sacrificing implant designs. However, it remains unclear how many osteoarthritic patients can be expected to have an intact ACL at the time of surgery in order to undergo ACL-retaining TKA. A systematic literature review was performed in November 2018 using the PubMed and EMBASE databases. Papers written in English, with more than 10 adult patients relevant to the research question were included, whereas cadaveric, revision, animal and simulation studies and conference abstracts were excluded. Data on ACL retention during intraoperative assessment or MRI scans were extracted and analysed using proportional meta-analyses. Twenty-six eligible publications (4167 knees) were included: 20 using intraoperative assessment, 4 using MRI, and 2 using both. Intraoperative assessment of the ACL during TKA showed that the ligament was present in 78% (95% confidence interval [CI]: 72–84%) and intact in 55% (95% CI: 45–65%) of the patients examined. MRI scans revealed higher percentages of ACL presence and intactness than intraoperative assessment, with 91% (95% CI: 79–96%) of the ACL being present and 68% (95% CI: 28–92%) intact. Fewer studies reported on MRI results compared to studies reporting on the intraoperative status of the ACL. In conclusion, intraoperative assessment suggests that over half of the osteoarthritic patients have an intact ACL at the time of TKA surgery, some of whom may qualify for
Introduction.
Introduction. Total knee arthroplasty (TKA) is the definitive treatment for osteoarthritis of the knee. The primary goal of the operation is to minimize or eliminate pain associated with osteoarthritis and secondarily to regain functional mobility and stability around the knee joint in order improve overall quality of life. The vast majority of techniques utilized for this procedure involves removal of the anterior cruciate ligament (ACL). In a native knee the ACL is a primary stabilizing ligament and essential for providing proprioceptive feedback. In the absence of the ACL, the kinematics of the knee are compromised. In an effort to more accurately replicate normal knee stability, new implant designs have emerged which maintain an intact ACL. Described herein is a cadaveric study looking at ACL competency after implantation of a TKA in which the cruciate ligaments are preserved. Methods. Twenty fresh, frozen cadaveric knees were utilized in which the ACL was intact. Specimens were excluded if there was concern for ACL stability as determined by physical examination, direct visualization during the arthrotomy and a KT-1000 measurement of anterior tibial translation in millimeters at 67N and 89N of anterior force. Each KT-1000 measurement was repeated three times using three individual examiners at both force values for a total of six data points. Bicruciate retaining components were implanted into each knee using a medial parapatellar approach. After adequate sagittal and coronal balancing was obtained, the knee was reexamined using the KT-1000 protocol described above to assess for any changes in ACL competency. The ACL was then transected and the knee was examined for a third time with the same KT-1000 protocol. For statistical analysis, a 2-way repeated-measures ANOVA was utilized. Pairwise differences were assessed utilizing Fisher's least significant difference method. Results. The KT-1000 measurement in millimeters of anterior tibial translation in relation to the femur provided the primary data points. The anterior translation of the tibia of the cadaveric knees before insertion of the components averaged 2.2mm at 67N of force and 3.6mm at 89N of force. After insertion of the components, the anterior tibial translation averaged 3.6mm at 67N of force and 5.0mm at 89N of force. After the ACL was transected, the averaged KT-1000 measurements were 6.8mm at 67N and 9.2mm at 89N of force. Discussion and Conclusion. Significant debate remains regarding which knee implant provides the optimum outcome in patients undergoing total knee arthroplasty. As the indications for TKA continue to expand and younger more active patients, with higher post-operative performance expectations pursue surgical intervention for degenerative knee osteoarthritis,
Introduction:. Patient expectations have escalated over the past several decades with respect to demand for success with total knee arthroplasty (TKA). It is reported that 15% to 20% of TKA recipients are unsatisfied with their result. Dynamic fluoroscopic studies and gait analyses have demonstrated that patients with TKA do not exhibit normal kinematics. On the other hand, patients with partial knee arthroplasty demonstrate more normal kinematics, thought to be secondary to retention of the anterior cruciate ligament (ACL) along with the posterior cruciate ligament (PCL). While not a new concept,
