Advertisement for orthosearch.org.uk
Results 1 - 6 of 6
Results per page:
Orthopaedic Proceedings
Vol. 103-B, Issue SUPP_14 | Pages 13 - 13
1 Nov 2021
Bizot P Kavakélis T Odri G
Full Access

The goal of the study was to describe the features of the aseptic loosening of the cup in CoC THR and to determine factors that affect the time to revision.

It is a retrospective study including all patients who had a revision of CoC THR for aseptic failure fixation of the cup, between 2007 and 2017. 55 patients (27 women, 28 men) (56 hips) were included in the study. Eight hips (13 %) had also a stem exchange. At the primary T HR, the mean age of the patients was 47.9 years (17–72), 28 press fit cups had screws, the mean diameter of the cup was 51.2 mm (46–62) and the mean inclination was 52° (37–67). Clinical and radiological data were retrospectively recorded by an observer different to the initial operators.

The mean age of the patients at the revision was 55.4 years (26–84). The mean time to revision was 90.1 months (14–240), and was significantly greater in patients aged less than 52 years, in cups without screws and with a 28mm head. The trend curve of the time to cup revision showed a bimodal distribution at three and ten years. 20 cups had migrated (33%). Bone loss was rated type 1 in 41 hips (73.0%), type 2 in 12 hips and type 3 in three hips). The mean diameter of the new cup was 52.3 mm (46–64). It was inferior to that of the initial cup in 26 hips (46.4%). 31 cups were impacted (55.5%) and 25 needed to be cemented (45.5%). No macroscopic wear was detected on the ceramic implant.

Aseptic loosening of the cup in CoC THA does not appear to increase over time, supporting the fact that the failure is unrelated to wear and is not due to a biological mechanism. The occurrence of two peaks of frequency over time may suggest that different mechanisms occur.


Orthopaedic Proceedings
Vol. 100-B, Issue SUPP_1 | Pages 64 - 64
1 Jan 2018
Sedel L Odri G Sanchez J Sverzut J Bizot P Laredo J
Full Access

Recent studies about hip stability after total hip arthroplasties (THA) concerned differences regarding bearings: ceramic on ceramic (CoC) presenting less dislocations on the long term compared to metal or ceramic on polyethylene. The hypothesis is a difference in the healing process of periarticular tissues, with a stronger fibrous tissue for the first one, and more foreign body reaction, joint effusion with the others.

NMR Imaging of the pelvis showing both hips using novel MR MAVRIC program for metal artefacts suppression, were performed in 10 patients, 15 THA and 2 non-pathological contralateral hips. Eight hips had CoC bearings, 3 of which were impacted cementless bulky ceramic implant, and 5 had a metal back. 7 hips had CoP bearings, 4 of which were cemented.

Native capsules showed a mean thickness of 6.6mm. For CoC bearings, capsule thickness ranged from 7mm to 9.6 mm with a mean thickness of 8mm. For CoP bearings, capsule thickness ranged from 3mm to 8.4mm, with a mean thickness of 6.1mm. Neocapsule appeared clearly in all COC bearings observed, while for CoP, sometimes it was less dense with fatty aspect, 3 hips out of 7 having a very thin capsule under 4mm.

It is possible to observe and quantify new capsule after THR and measure differences although not significant regarding bearings on limited number of samples. More patients might be included, but the tendencies observed here might explain better long term stability in vivo observed with Coc.


Orthopaedic Proceedings
Vol. 96-B, Issue SUPP_16 | Pages 11 - 11
1 Oct 2014
Paul L Cartiaux O Odri G Gouin F
Full Access

Resecting bone tumours within the pelvis is highly challenging and requires good cutting accuracy to achieve sufficient margins. Computer-assisted technologies such as intraoperative navigation have been developed for pelvic bone tumour resection. Patient-specific instruments have been transposed to tumour surgery. The present study reports a series of 11 clinical cases of PSI-assisted bone tumour surgery within the pelvis, and assesses how accurately a preoperative resection strategy can be replicated intraoperatively with the PSI.

The patient series consisted in 11 patients eligible for curative surgical resection of primary bone tumor of the pelvis. Eight patients had a bone sarcoma of iliac bone involving the acetabulum, two patients had a sacral tumor, and one patient had a chondrosarcoma of proximal femur with intra-articular hip extension. Resection planning was preoperatively defined including a safe margin defined by the surgeon from 3 up to 15 mm. PSI were designed using a computer-aided design software according to the desired resection strategy and produced by additive manufacturing technology. Intraoperatively, PSI were positioned freehand by the surgeon and fixed on the bone surface using K-wires. The standard surgical approach has been used for each patient. Dissection was in accordance with the routine technique. There was no additional bone exposure to position the PSI. Histopathological analysis of the resected tumor specimens was performed to evaluate the achieved resection margins. Postoperative CT were acquired and matched to the preoperative CT to assess the local control of the tumor. Two parameters were measured: achieved resection margin (minimum distance to the tumor) and location accuracy (maximum distance between achieved and planned cuttings; ISO1101 standard).

PSI were quick and easy to use with a positioning onto the bone surface in less than 5 minutes for all cases. The positioning of the PSI was considered unambiguous for all patients. Histopathological analysis classified all achieved resection margins as R0 (tumor-free), except for two patients : R2 because of a morcelised tumour and R1 in soft tissues. The errors in safe margin averaged −0.8 mm (95% CI: −1.8 mm to 0.1 mm). The location accuracy of the achieved cut planes with respect to the desired cut planes averaged 2.5 mm (95% CI: 1.8 to 3.2 mm).

Results in terms of safe margin or the location accuracy demonstrated how PSI enabled the surgeon to intraoperatively replicate the resection strategies with a very good cutting accuracy. These findings are consistent with the levels of bone-cutting accuracy published in the literature. PSI technology described in this study achieved clear bone margins for all patients. Longer follow-up period is required but it appears that PSI has the potential to provide clinically acceptable margins.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVII | Pages 400 - 400
1 Sep 2012
Odri G Fraquet N Isnard J Redon H Frioux R Gouin F
Full Access

Cam type femoroacetabular impingement (FAI) is due to an aspheric femoral head, which is best quantified by the alpha angle described on MRI and CT-scan. Radiographic measurement of the alpha angle is not well codified and studies from the literature cannot conclude on the best view to measure it. Most authors also describe a mixed type FAI which associates an aspheric femoral head with an excessive anterior acetabular coverage of the femoral head. Anterior center edge (ACE) angle has been described on the false profile view to measure anterior acetabular coverage in hip dysplasia and has never been evaluated in FAI. In this study, we developed a new lateral hip view which associates a lateral view of the femoral neck and a false profile view of the acétabulum, which we called profile view in impingement position (PVIP).

Twenty six patients operated for FAI had CT-scan, the PVIP and the false profile view of one or two hips according to pain. A control group of 19 patients who did not suffer from the hip had the PVIP. Alpha angles were measured twice on 17 CT scan of FAI patients by two observers and compared with the alpha angles measured on the corresponding hip PVIP by a correlation analysis. Alpha angles were measured twice on 45 PVIP in FAI patient and on 19 PVIP in the control group by three observers. ACE angles were measured once on 15 PVIP and on 15 false profile views. Means were compared by two tail paired t-tests, intra- and inter-observer reliability were measured by intraclass correlation coefficient.

Mean alpha angle on CT scan was 65.8° and 65.6° for observers 1 and 2 respectively (p>0.05). It was 63.6° and 64.3° on the PVIP (p>0.05). No significant difference was found between CT scan and radiographic measurements, and Pearson's correlation coefficients were good at 0.74 and 0.8. ICC was 0.86 for inter-rater reliability, and 0.91 for intra-rater reliability for CT-scan alpha angle measures. ICC for PVIP measures varied from 0.82 to 0.9 for intra-rater reliability and from 0.6 to 0.9 for inter-rater reliability. Mean alpha angle measured on PVIP in FAI patients was 63.3° and was 44.9° in control subjects and the difference was significant (p<0.001) for the three observers. None of the FAI patients and 88% of the control subjects had an alpha angle < 50°. Mean ACE angle was 26.8° on PVIP and 32.8° on the false profile view, the difference was significant (p=0.015), and the Pearson's correlation coefficient was moderate (r=0.58).

The PVIP is a reliable radiographic view to measure the alpha angle. It allows a good quantification of the alpha angle comparable to CT-scan measurements and permits to differentiate patients from control subjects. PVIP is not a good view to quantify anterior edge angle probably because of acetabular retroversion due to the hip flexion needed in this view. Mean ACE angle measured on the false profile view in FAI patient was comparable to ACE angle in general population reported in the literature.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVII | Pages 300 - 300
1 Sep 2012
Lintz F Waast D Odri G Moreau A Maillard O Gouin F
Full Access

Purpose

To investigate the prognostic effect of surgical margins in soft tissue sarcoma on Local Recurrence (LRFS), Metastasis (MFS) and Disease Free Survival (DFS).

Patients and Methods

This is a retrospective, single center study of 105 consecutive patients operated with curative intent. Quality of surgery was rated according to the International Union Against Cancer classification (R0/R1) and a modification of this classification (R0M/R1M) to take into account growth pattern and skip metastases in margins less than 1mm. Univariate and multivariate analysis was done to identify potential risk factors. Kaplan-Mayer estimated cumulative incidence for LRFS, MFS and DFS were calculated. Survival curves were compared using Log rank tests.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_III | Pages 465 - 465
1 Jul 2010
Odri G Lamoureux F Picarda G Battaglia S Dumoucel S Trichet V Tirode F Laud K Burchill S Gouin F Heymann D Rédini F
Full Access

The development of multidisciplinary therapy for Ewing’s sarcoma (ES) has increased current long-term survival rates to greater than 50%, but only 20% for patients with clinically detectable metastases at diagnosis, or not responding to therapy or with disease relapse. Anti-bone resorption bisphosphonates (BP) may represent promising adjuvant molecules to limit the osteolytic component of bone tumor.

The combination of zoledronic acid (ZOL) and ifosfamide (IFOS) or mafosfamide (MAFOS) was studied in ES models and in 8 human cell lines all expressing the EWS-FLI1 fusion gene. Cell proliferation, viability, apoptosis and cell cycle distribution were analysed. The ES models were developed in immuno-deficient mice by inoculating the human tumor cells either intra-muscular (soft tissue tumor development) or intra-osseous (bone tumor development). Mice were then treated with ZOL (100 μg/kg twice or 4 times/week) and/or ifosfamide (IFOS 30 mg/kg, one to 3 sequences of 3 injections).

All the cell lines studied were more or less sensitive to ZOL and MAFOS in terms of cell proliferation. Both drugs induced cell cycle arrest respectively in S and G2M phase and final apoptosis associated to caspase 3 activation. In vivo, ZOL had no effect on soft tumor progression although it dramatically inhibits ES development in bone site. When combined with IFOS, ZOL exerts synergistic effects in the soft tissue model leading to a similar quantitative inhibitory effect when associated with 1 sequence IFOS as compared to 3 sequences of IFOS alone. In the bone model, ZOL prevents tumor recurrence observed with a lonely sequence of IFOS.

Combination of ZOL with conventional chemotherapy showed promising results in both ES models and could allow the clinicians to diminish the doses of chemotherapy. Moreover, as ZOL and MAFOS induce cell death by different pathways, respective resistance may be circumvented.