Calcification and ossification have been described in artery wall in pathologic conditions and aging. We previously described the use of cryopreserved arterial allografts as membranes for guiding bone regeneration. We hypothesize that artery is as good as synthetic membranes (e-PTFE, gold-standard in guided bone regeneration) due to the osteogenic potential of cells from its medial layer.

A comparative study was made creating 10 mm mid-diaphyseal radial defects in 15 New Zeland rabbits (30 forearms): 10 defects were covered with an e-PTFE membrane and 10 defects with no membrane (control group). Studies: X-rays, CT, MR, morpho-densitometric analysis, electronic and optical microscopy.

To demonstrate the cellular arterial stock, cryopre-served and fresh rabbit thoracic aorta specimens were studied. Medial layer was isolated and cultured as explants in normal medium. Cells were harvested and added to a 3-D scaffold based on plasmatic albumin in osteogenic medium. Immunocitochemical study was made. Radial defects surrounded by cryopreserved arterial membranes showed total regeneration in nine of 10 defects versus seven of 10 defects in e-PTFE group (no statistically significant differences were detected between them). No tissue layer was found between bone and artery while a connective tissue layer was observed between e-PTFE and bone. Neither radiological nor histological healing were detected in the control group.

Cells cultured had smooth muscle features as they showed immunofluorescence with anti-smooth muscle alpha-actin, anti-calponin and anti-vimentin antibodies. When cells were added to a 3-D matrix, they showed chondro and osteogenic differentiation, as they stained positive for types II and X collagen, alkaline phosphatase and von Kossa.

Although no statistically significant differences between artery and e-PTFE groups were detected, histological and cellular findings suggest a superiority of cryopreserved arterial allografts when compared with synthetic membranes of e-PTFE, with a contribution of the cellular stock of the medial layer in the healing process.

Introduction and purpose: Different bearing surfaces have been used to prevent osteolysis, such as alumina-alumina. We present here an analysis of the results of a prospective multi-center study of complications related to the use of alumina-alumina bearings.

Materials and methods: In 4 hospitals 319 cups with hydroxyapatite stems and alumina-alumina bearing surfaces were implanted with a mean follow-up of 5.6 years (range: 3–8). The mean age of the patients was 52.7 (range: 14–70). Alumina wear was calculated by means of a special program.

Results: Revision was performed of 5 cups and 2 stems. In one hip with a horizontal acetabular angle (35°) and a thin alumina liner (size 50/32), an acetabular liner fracture occurred 36 months after surgery. The probability of not undergoing revision due to any cause was 96.9% (CI 95%:94.7–99.1%). None of the patients reported any type of noise. All the non-revised cases showed good results both on clinical and X-ray exam at the end of the follow-up. The difference between the center of the head of the femur and the center of the head of the cup at 6 weeks after surgery was −2.45+0.53 mm, with no further changes seen during the follow-up.

Conclusions: These data suggest that the prosthetic alumina-alumina bearing surface has excellent results over 5 years and that alumina fractures are infrequent. No changes were seen in terms of the penetration of the femoral head in any case. Longer follow-ups are necessary to determine if the reduction of wear translates into less osteolysis and loosening.

Introduction: Instability of THR is a problem both for the patient and the surgeon. Its frequency varies from 3 to 20% in multioperated patients. When the cause is known treatment usually gives good results and one way of preventing dislocation is to increase the size of the prosthetic head. The cause for instability is multifactorial and sometimes the patients have predisposing factors: muscular weakness or neurological alterations that determine the need for constrained and bipolar cups.

Materials and methods: Constrained cups capture the prosthetic head preventing dislocation and studies have been published with widely differing results. The bipolar cup introduced by Busquet is based on a metal cup coated with hydroxyapatite that is fixated by means of 2 plots to the ischium and the pubis. The polyethylene insert captures a head of 22.2 or 28 mm. Dislocation, when it takes place, is between the metal cup and the insert, and a force much greater than that needed to dislocate a head of 22.2 or 28 mm in diameter is needed.

Results: In a multi-center study carried out on 238 bipolar cups, Leclerc reports a 3.3 % failure rate. Philippot using 106 bipolar cups, reports no dislocation and a survival of 94.6% at 10 years. Our personal series comprised 75 cases, (54 primary and 21 revisions) with only one episode of dislocation due to significant trauma.

Conclusions: The bipolar cup can be used in primary and revision surgery and is effective in decreasing dislocations in high-risk patients and is our option of choice in patients with neuromuscular alterations or multiple surgeries.

INTRODUCTION: In guided tissue regeneration a membrane is used for defect isolation to protect it against invasion from surrounding tissues and to keep intrinsic healing factors ‘in situ’. This technique has been successfully used in maxillo-facial surgery, but short experience has been reported in long-bone defects, with synthetic membranes and with variable results. In the other hand, calcification and ossification inside the arterial wall have been described.

OBJECTIVE: The aim of the study was to evaluate the use of cryopreserved aorta allografts as membranes for guided tissue regeneration in comparison with expanded poly-tetra-fluoro-ethylene (e-PTFE) synthetic membranes.

MATERIAL & METHODS: Prospective, randomized, blinded study in 15 New-Zeland rabbits. 10 mm mid-diaphyseal defects were created in both radii: 10 defects were covered with a cryopreserved aortic allograft as a tube, 10 with an e-PTFE membrane and 10, with no barrier membrane, served as controls. Animals sacrifice at 6–12–24–30 months. Studies: X-rays, CT, MR, morpho-densitometric analysis, electronic and optical microscopy. Immuno-cytochemistry on tissues and arterial wall cells cultured.

RESULTS: None of the control defects healed. Nine defects covered with an artery completely reconstituted, but only six of those covered with e-PTFE, with a nearly normal cortical-medullar pattern and with progressive increasing in density and thickness of medullar and cortical to values similar to those of the normal bone. Histological studies showed no inflammatory response to the arterial graft, direct union between the artery and the regenerated bone and even mature bone between the elastic laminae of the arterial wall, suggesting superior biocompatibility properties. Immuno-cytochemistry and ultrastructural studies suggest that arterial allografts could act not only as membrane barriers, with additional osteoinductive properties due to trans-differentiation of viable arterial wall cells (endothelial, smooth muscle and/or tissue specific stem cells) towards osteoblastic cells, and also due to ossification secondary to changes in proteins of the arterial extracellular matrix. This could be the application of the process of arterial wall calcification and ossification (usually seen in arteriosclerosis, gender, diabetes or kidney failure) for regeneration of long-bone defects.

CONCLUSION: Cryopreserved aortic allografts can be used as membrane barriers for guided bone regeneration, with superior results to e-PTFE membranes.

Introduction. Alternative bearing surfaces to polyethylene have been introduced to avoid the appearance of osteolysis in THR. The aim of this study has been to perform prospective analysis of the data from a multi-center clinical trial for assessing the incidence of early alumina-specific-complications.

Material and Methods. We analysed 310 Cerafit cups associated with a Multicone-HA stem using alumina-on-alumina bearings implanted in four institutions from 1999 to 2003, with a mean follow-up of 4.7 years. Patients’ mean age was 52.8+13.4 years. Linear femoral head penetration was analysed using a software package.

Results. There were 4 revisions: 2 revisions due to dislocations resulting poor surgical technique (1 cup and 1 stem) and 2 revisions after a trauma (1cup and 1 stem). There was 1 alumina liner fracture 36 months after implant in a hip with a horizontal acetabular angle (35°) and a thin alumina liner (size 50/32). The other cases showed good clinical and radiographic results at the end of follow-up. The radiographic difference between the femoral head and cup centres at 6 weeks postsurgery was 2.48+0.60 mm, without changes in the course of the follow-up. The mean linear femoral head penetration was unreliable (0.00186+0.0032 mm/year) because it was below the mean error for the measurement system.

Conclusions. These data demonstrate that Cerafit Alumina-on-Alumina prostheses show excellent results after 5 years. Liner fractures are uncommon. Despite the blurred alumina images, the digitized method, although not totally accurate and used only for a general estimate, allows us to measure the approximate distance between the centre of the cup and the centre of the femoral head. Changes in linear femoral head penetration were not seen in any hip. Continued follow-up should determine if reduction in wear among the alumina-on alumina bearings results in less osteolysis.

Background and objective: In guided tissue regeneration a membrane is used for defect isolation to protect it against invasion from surrounding tissues and to keep intrinsic healing factors ‘in situ’. This technique has been successfully used in maxillo-facial surgery, but short experience has been reported in long-bone defects, with synthetic membranes and with variable results. In the other hand, calcification and ossification inside the arterial wall have been described. The aim of the study was to evaluate the use of cryopreserved aorta allografts as membranes for guided tissue regeneration in comparison with expanded poly-tetra-fluoro-ethylene (e-PTFE) synthetic membranes.

Methods: Prospective, randomized, blinded study in 15 New-Zeland rabbits. 10 mm mid-diaphyseal defects were created in both radii: 10 defects were covered with a cryopreserved aortic allograft as a tube, 10 with an e-PTFE membrane and 10, with no barrier membrane, served as controls. Animals sacrifice at 6-12-24-30 months. Studies: X-rays, CT, MR, morpho-densitometric analysis, electronic and optical microscopy. Immuno-cytochemistry on tissues and arterial wall cells cultured.

Results: None of the control defects healed. Nine defects covered with an artery completely reconstituted, but only six of those covered with e-PTFE, with a nearly normal cortical-medullar pattern and with progressive increasing in density and thickness of medullar and cortical to values similar to those of the normal bone. Histological studies showed no inflammatory response to the arterial graft, direct union between the artery and the regenerated bone and even mature bone between the elastic laminae of the arterial wall, suggesting superior biocompatibility properties. Immuno-cytochemistry and ultrastructural studies suggest that arterial allografts could act not only as membrane barriers, with additional osteoinductive properties due to trans-differentiation of viable arterial wall cells (endothelial, smooth muscle and/or tissue specific stem cells) towards osteoblastic cells, and also due to ossification secondary to changes in proteins of the arterial extracellular matrix. This could be the application of the process of arterial wall calcification and ossification (usually seen in arteriosclerosis, gender, diabetes or kidney failure) for regeneration of long-bone defects.

Conclusion: Cryopreserved aortic allografts can be used as membrane barriers for guided bone regeneration, with superior results to e-PTFE membranes.

Tantalum is a pure metallic element and is attractive for use in orthopaedic implants because it is one of the most biocompatible metals available for implant fabrication. The potential advantages for the use of porous tantalum in total hip arthroplasty include:

excellent bone and tissue ingrowth observed histologically;

A polyethylene liner is cemented into the tantalum shell to eliminates backside motion. In addition, acetabular augments of porous tantalum have been developed for use in restoration of major bone deficiencies. Prospective study on a case serie of 113 THA’s performed by two surgeons in a single institution.

From 2000 to December 2003, 113 hips have undergone arthroplasty using porous tantalum implants consisting of 54 primary hip arthroplasties and 59 revision THA’s. The patients where evaluated clinical and radiographically every 3 month during the first year, and after yearly. Mean patient age was 64,2 years, (range 44–87); with 59% males and 41% females.

No patients died or lost to follow-up. No further surgeries of the involved hip. No radiographic signs of loosening of the acetabular component according to the criteria of Hodgkinson et al. No problems specifically from the use of acetabular augments or extra screws has been noted. Of the revision series, a total of 16 cases have received acetabular augments. Complications included 1 superficial infection, 2 dislocations. No vasculonervous complication; and in 2 cases technical difficulties to achieve good fixation due to ethiology of the THA (desarthrodesis). The average Harris hip score improved from 48 to 89 following primary surgery.

Tantalum acetabular components for primary and revision hip surgery have performed well for up to 3 years, and have excellent stability. The two-piece acetabular shell and augments permits the reconstruction of every acetabular bone defect.

Tantalum is a pure metallic element and is attractive for use in orthopaedic implants because it is one of the most biocompatible metals available for implant fabrication. The potential advantages for the use of porous tantalum in total hip arthroplasty include:

excellent bone and tissue in growth observed histologically;

A polyethylene liner is cemented into the tantalum shell to eliminates backside motion. In addition, acetabular augments of porous tantalum have been developed for use in restoration of major bone deficiencies. Prospective study on a case serie of 113 THA’s performed by two surgeons in a single institution.

From 2000 to December 2003, 113 hips have undergone arthroplasty using porous tantalum implants consisting of 54 primary hip arthroplasties and 59 revision THA’s. The patients where evaluated clinical and radiographically every 3 month during the first year, and after yearly. Mean patient age was 64,2 years, (range 44–87); with 59% males and 41% females.

No patients died or lost to follow-up. No further surgeries of the involved hip. No radiographic signs of loosening of the acetabular component according to the criteria of Hodgkinson et al. No problems specifically from the use of acetabular augments or extra screws has been noted. Of the revision series, a total of 16 cases have received acetabular augments. Complications included 1 superficial infection, 2 dislocations. No vasculo-nervous complication; and in 2 cases technical difficulties to achieve good fixation due to ethiology of the THA (desarthrodesis). The average Harris hip score improved from 48 to 89 following primary surgery.

Tantalum acetabular components for primary and revision hip surgery have performed well for up to 3 years, and have excellent stability. The two-piece acetabular shell and augments permits the reconstruction of every acetabular bone defect.

Introduction and purpose: The ulnar carpal impaction syndrome (UCIS) is a common cause of pain in the ulnar aspect of the wrist. It has numerous causes, although most cases are due to rupture of the triangular fibrocartilaginous complex (TFC), either traumatic or degenerative.

Materials and methods: We carried out a prospective study of the results of ulnar shortening osteotomy in 41 wrists. The osteotomy (transverse) was performed in the middle third of the ulnar and the shortening ranged from 3 to 10 mm. For stabilisation we used a 3.5-mm AO LC-DCP and LCP plate. Minimum follow-up was 6 months and maxim was 8 years.

Results: The mean age was 37; there were 28 women and 12 men. The ulnar variance ranged from 5 mm positive to 2 mm negative. All the wrists had Tolat type I or II distal radioulnar morphology. Pain and pain frequency were reduced to levels below surgical indication in 89% of cases within 2 and 4 months after the operation. All the ulnae consolidated satisfactorily between 12 and 14 weeks, except for one case of pseudoarthrosis, which was treated with an iliac crest graft and further bone synthesis.

Conclusions: The results obtained in this series reveal adequate progression of wrist pain and function in patients treated for UCIS by ulnar shortening. There were very few complications and revisions.

Introduction.- Some of the recommended alternatives to increase the cementless acetabular cups stability are the plasma sprayed porous coated and HA and the press-fit impaction. The incorporation of three peripheral fins improves final fixation avoiding micromotion at the immediate post operative period. From 1992 we have implanted 4068 cups, the majority of them in primary cases (78%). The rest 22% in revision cases.

Cup characteristics: hemispheric with fins to improve prumary fixation and HA coating; ring-long ystem in common with other Biomet models, reason why liner are interchangeables.

Material and methods.- 4.068 Bihapro cups (Biomet-Merck) were implanted at a multicenter study in three Hospitals, adjoined to the University, between 1992 and 2003. This is a press-fit model with a porous surface coated with HA and three peripheral fins to improve primary fixation and also dome holes to allow the use ob bone screws.

Prymary indication: osteoarthritis (76%), AVN (7%), fractures (8%), dysplasias (3%), rheumatoid arthritis (6%). Surgical approach: lateral (49%), posterolateral (34,2%), anterior (16,8%). Prophylaxis: antitrombotic (LMWH), antibiotic (1st generation cephalosporins), heterotopic ossification (indomethacin).

Results.- Results. 24 patients showed dislocation and 47 % had some degree of periarticular ossification one year alter surgery; the approach used did not show significative differences. The survival study was done using Kaplan-Meier’s curve. The end-point for failure in this study was the need to perform aesptic revision surgery; being the survival at 9 years of 99.49 % (CI 95 % 99.08 – 99.90). Seven cases needed revision surgery (0.3 %); two cases for migration of the cup and five cases for iterative dislocations.

Conclusions.- Acetabular cups with Plasma Spray Porous Coating in combination with HA, results stable at mid term. The supplementary fixation of the three peripheral fins avoids micromotion optimizing long-term fixation.

Introduction. Tantalum is a pure metallic element and is attractive for use in orthopaedic implants because it is one of the most biocompatible metals available for implant fabrication. The potential advantages for the use of porous tantalum in total hip arthroplasty include: 1) excellent bone and tissue ingrowth observed histologically; 2) direct polyethylene intrusion into the metal substrate. This allows the elimination of any potential backside wear in the monoblock cup; 3) The two-piece design consist of a tantalum shell with screw holes for fixation into the dome of the ilium and posterior column. A polyethylene liner is cemented into the tantalum shell to eliminates backside motion. In addition, acetabular augments of porous tantalum have been developed for use in restoration of major bone deficiencies.

Prospective study on a case serie of 113 THA’s performed by two surgeons in a single institution.

Material & Methods. From 2000 to December 2003, 113 hips have undergone arthroplasty using porous tantalum implants consisting of 54 primary hip arthroplasties and 59 revision THA’s. The patients where evaluated clinical and radiographically every 3 month during the first year, and after yearly. Mean patient age was 64,2 years, (range 44–87); with 59% males and 41% females.

Results. No patients died or lost to follow-up. No further surgeries of the involved hip. No radiographic signs of loosening of the acetabular component according to the criteria of Hodgkinson et al. No problems specifically from the use of acetabular augments or extra screws has been noted. Of the revision series, a total of 16 cases have received acetabular augments.

Complications included 1 superficial infection, 2 dislocations. No vasculo-nervous complication; and in 2 cases technical difficulties to achieve good fixation due to ethiology of the THA (desarthrodesis).

The average Harris hip score improved from 48 to 89 following primary surgery.

Discussion and Conclusions Tantalum acetabular components for primary and revision hip surgery have performed well for up to 3 years, and have excellent stability.

The two-piece acetabular shell and augments permits the reconstruction of every acetabular bone defect.

Purpose: To assess the performance of a constrained liner in an unstable hip prosthesis.

Materials and methods: This is a retrospective study of 66 hip prostheses implanted in 66 patients by means of the same constrained cup (Lefevre, Lepine Group, France). The cup was implanted into 15 primary prostheses and 51 revision ones in order to treat recurrent dislocations (10 cases) or to prevent dislocations (56 cases with a deficit of the periarticular musculature or mental or neuromuscular disorders). The mean age was 76.7 years, 75.7% were female, 53% were operated in the right side and the mean follow up was 30.2 months.

Results: By the time the last review was made, four patients died for reasons not related to their hip surgery. One patient showed a dissociation between the femoral head and the stem at the level of the Morse taper; the head was trapped in the retentive liner and an open reduction was needed to replace the existing prosthetic head by a new one with a long neck. Another patient had a prosthetic infection that was treated by means of a two-stage replacement. Radiolucent lines were observed in de DeLee’s zone 1 in 1.5% of patients, in 3% the lines were in zone II and in 3% they were in zone. However, according to Hodgkinson’s radiographic criteria, no cups were loose.

Conclusions: Although retentive cups do address hip instability, the various cases of failure that have occurred, the appearance of radiolucencies and the concerns about their long-term fixation suggest that their use should be carefully weighted.

Purpose: To assess the safety and efficacy of using mini-incisions (? 10 cm) in the implantation of total hip prostheses.

Materials and methods: A prospective study was carried out to compare a cohort of 25 total hip prostheses implanted using a posterior approach through mini-incisions (mean length 9.4 cm, range: 8–10) with another 25-patient cohort where the incisions were of standard length. Patients in both groups had a similar gender distribution, similar ages (± 3 years), weight (± 3 kg) and height (± 3 cm). The type of implant used was also similar. Statistical analysis used: Chi-square, Mann-Whitney U test and Student’s t test.

Results: After 6 months, no significant differences were observed in the body mass index, femoral cortical index, intraoperative or postoperative complications, cup diameter, stem size, cup inclination, stem alignment, quality of femoral cementation, metaphyseal and isthmic filling of the stem, leg length discrepancy, number of blood units transfused, hemoglobin and hematocrite levels 6 hours post-op, in the decline of these levels from those of the preop period or in the Harris Hip Score values. The mini-incision group showed higher haemoglobin and hematocrite levels after 48 hours and a lower reduction of these values from preop to 48 hours after surgery and a lower suction drain. Fewer patients of these patients needed a transfusion, they were the first to sit and start walking and they had significantly shorter hospital stays. Mean follow-up was 20 months.

Conclusions: Total hip prostheses can be implanted through mini-incisions in a safe and reproducible way and lead to a better, faster recovery without additional complications, with the same degree of precision and similar clinical results.

Purpose: To assess the use of cortical allografts (bone plates?) in hip replacement surgery.

Materials and methods: This is a retrospective study of 43 bone plates in 36 hip prostheses. In 18 cases they were implanted to treat a periprosthetic fracture (an associated replacement of the femoral component was performed in 5 cases) and in 18 they were implanted to replace a loosened stem in a hip with large bone defects. Standard long uncemented stems were implanted in 7 cases and standard cemented stems associated with morselized compacted allografts were implanted in 16 cases. 14 patients were only given bone plates and in 22 these bone plates were associated to a metal plate. The mean age was 69.1 years (range: 38–82). 61.1% were female, 18% were implanted in the right side and the mean follow-up was 45.4 months.

Results: At the time of the last review, three patients had died but for reasons not related to their hip surgery. Transient sciatic nerve palsy was observed in one patient, prosthetic dislocation in three cases (two of them were successfully treated with bracing and the other had to be given a constrained cup), there was an infection (treated with a two-stage replacement) and two re-fractures (after 3 and 13 months) treated with a new osteosynthesis with a bone plate associated to a metal plate. All the fractures healed and the imaging tests showed an integration of the bone plate with the host bone with no signs of prosthetic loosening.

Conclusions: Cortical allografts can fulfill two functions: a mechanical one (they behave as if they were a plate) and a biological one (they increase bone stock on integration).

Aims: Clinical and radiographic comparison between a fixed polyethylene prostheses and mobile bearing design. Methods: Prospective study in 147 tricompartimental cemented cruciate-retaining prostheses (Interax, Stryker- Howmedica-Osteonics): 90 conventional fixed polyethylene and 57 mobile bearing (antero-posterior slide and rotation over an axis in the medial plateau). No differences in preoperative age, sex, range of motion, deformity, rheumatoid arthritis or osteo-arthritis, and Ahlback stage. Results: At 1, 6, 12 and 24 months there were no differences between both groups (p> 0.05) in femorotibial angles, radiolucencies, duration of surgery, pain at rest or walking, stairs, arise from chair, walking ability, range of motion, supports (cane or crutches), complications and score of the American Knee Society. Conclusions: With 2-year follow-up there are no differences in clinical or radiographic results between fixed and mobile bearing knee prostheses. Further investigations with long-time follow-up are mandatory in order to determine differences and advantages in polyethylene wear or implant survival.

Aims: To determine whether the use of Biphasic Calcium Phosphate (BCP) plus local autogenous graft modifies our clinical results and fusion rate, in comparison with iliac crest graft alone. Methods: Prospective and nonrandomized study. 40 patients were operated on with pedicle instrumentation and posterolateral fusion. Degenerative lumbar disease was the etiology. 25 patients had one level fusion and 15 two or more. Minimum follow-up: 1 year. 15 patients were smokers (17.4 cig/day). The Oswestry disability index at 0, 3, 6 and 12 months was filled in to see the evolution and final clinical result. To evaluate the fusion, X-ray criteria were used. Results: Oswestry test changed from 63,8 to 16,4 at the end of the study. 3 patients did not achieve fusion (7,5%), none of them smokers. Up to date we have been working with the same idea but trying to increase the fusion rate by adding bone marrow to BCP and grafts. The initial results are very encouraging. Conclusions: We have no difference in our non-union rate between previous historic register and the new technique.

Similar clinical results were obtained but the proportion of excellent/good has improved with iliac crest preservation.

Aims: Hydroxyapatite HA-coated hip replacements were introduced in the late 1980ñs when the intermediate term results of porous-coated hip replacements were not proving to be satisfactory with a high rate of thigh pain even well þxed implants. The aim of our retrospective study was to review the results of group of patients who underwent HA-coated cup between 1992 and 2001, and evaluate the clinical and radiological outcome of the HA-coated cup over a 7 to 10 year period. Methods: In a multicenter study between 1992 and 2001 were used 2899 Bihapro cups (Biomet-Merck). This is a press-þt model with a porous surface coated with hydroxyl-apatite and three peripheral þns to improve primary þxation and also dome holes to allow the use of bone screws. In 993 (34.2%) cases a posterior approach was performed, lateral approach in 1419 (49%) and the anterior approach in 487 (16.8%) cases. All patients were mobilised on the second post-operative day once drains had been removed. They were encouraged to use crutches while walking for the þrst 6 weeks. Results: 35 patients (1.2%) showed dislocation. 47% of the seires had some degree of periarticular ossiþcation one year after surgery; the approach used did not show signiþ-cative differences. The survival study was done using Kaplan-Meierñs score. The end point for failure in this study was the need to perform aseptic revision surgery; being the survival at 9 years of 99.49% (CI 95%: 99.08 Ð 99.90).Conclusions: The acetabular shells with plasma spray porous coating in combination with HA results stable at mid term. The supplementary þxation of the three peripheral þns avoids micromotion optimizing lon-term þxation.

Aims: Clinical and radiographic evaluation of retinacular lateral releases using an arthroscopic approach, for anterior knee pain in cases with slight patelar axial malposition Methods: Prospective study in 34 patients. Evaluation according to the Insall clinical score, patient opinion, and change in radiographic angles and index from pre-operative to post-operative. Results: Postoperative clinical score (Insall 1983): 82% excellent; 6% good; 6% poor; 6% bad. Angular values: patelar index (Cross 1976) of 7,1 and sulcus angle (Brattstrom 1964) of 139,6∞. Radiographic correction: from 15,7 to 17,9 in patello-femoral angle (Laurin 1978); from −5,6 to −5,3∞ in congruency angle (Merchant 1974); and from 1,37 to 1,12 in patello-femoral index (Laurin 1978). Conclusions: Clinical results, patient satisfaction, and radiographic correction of congruency angle, patello-femoral angle and patello-femoral index make justifiable the use of arthroscopic lateral releases in the treatment of selected cases of patello-femoral pain.

Introduction and Objectives: This is a prospective analysis of clinical and radiographic outcomes of total hip prosthesis with alumina-on-alumina friction coupling implants performed at two hospitals.

Materials and Methods: This study analyzes 60 prostheses with alumina-on-alumina friction coupling (Ceraver-Osteal) (May 1999-May 2002). The Cerafit cup was used in association with 32 Multicone-HAC stems and 28 Anatomic-HAC. Of these cases, 36 were male, and 24 were female, with average age being 47.05+/−12.60 years. Mean follow-up time was 2.3 years. There were no lost or revised cases. Radiographic analysis was done according to Johnston et al., and wear was assessed using the Sychterz method in a special computer program (Auto-CAD R14).

Results: All cases had good clinical and radiographic outcomes. There were no revisions or loosening of the implants. There was one dislocation and one intraoperative fracture, which were both treated by conservative means. There were no infections. The distance between the centres of the femoral head and the cup on the initial radiograph (position zero) was 2.49+/−0.70mm. This measurement stayed constant with time, and no changes were observed associated with so-called early wear or initial seating. Mean wear with respect to a reference of position zero was 0.0184+/−0.0187. This figure is below the error level of the measuring system and thus is not measurable.

Discussion and Conclusions: The alumina-on-alumina prosthesis (Ceraver) yields positive clinical and radiographic results at 4 years. Even though the alumina partially distorts the radiographic image, no evidence of early wear due to seating of the components was observed at four years of follow up using the Sychterz digitalized method.