Although minimally invasive plate osteosynthesis (MIPO) has become popular option for humeral shaft fractures, indirect reduction and its maintenance are technically challenging. The purpose of this study is to describe a reproducible technique utilizing an external fixator during MIPO and to assess its outcomes. Twenty-nine cases with a mean age of 37.1 years were included. There were 7 simple (type A) and 22 comminuted (type B or C) fractures. Indirect reduction was achieved and maintained by a monolateral external fixator on the lateral aspect of humeral shaft, and MIPO was performed on the anterior surface. Union, alignment, complications, and functional results of the shoulder and elbow were assessed.Background
Methods
To establish relative fixation strengths of a single lateral locking plate, a double locking plate, and a tibial nail in treatment of proximal tibial extra-articular fractures. Three groups of composite tibial synthetic bones consisting of 5 specimens per group were included; lateral plating (LP) using a LCP-PLT (locking compression plate-proximal lateral tibia), double plating (DP) using a LCP-PLT and a LCP-MPT (locking compression plate-medial proximal tibia), and intramedullary nailing (IN) using an ETN (expert tibial nail). To simulate a comminuted fracture model, a gap osteotomy measuring 1 cm was cut 8 cm below the joint. For each tibia, a minimal preload of 100N was applied before loading to failure. A vertical load was applied at 25mm/min until tibia failure.Background
Methods
Although gradual bone transport may provide a large-diameter bone, complications are common with the long duration of external fixation. To reduce such complications, a new technique of bone transport with a locking plate has been done for tibial bone defect. In 13 patients (mean age, 38.9 years) of chronic osteomyelitis or traumatic bone defect, segmental transport was done using external fixator with a locking plate. In surgical technique, a locking plate was fixed submuscularly, holding the proximal and distal segments. Then, the external fixator for transport was fixed without contact of the locking plate. After docking, 2 or 3 screws were fixed at the transported segment through the plate holes. At the same time, the external fixator was removed.Background
Methods
