Advertisement for orthosearch.org.uk
Results 1 - 3 of 3
Results per page:
Applied filters
Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 103-B, Issue SUPP_4 | Pages 35 - 35
1 Mar 2021
Montalbano G Molino G Niclot F De Maria C Vozzi G Belmonte M Licini C Ciapetti G Borciani G Fiorilli S Brovarone C
Full Access

Bone tissue engineering is a promising strategy to treat the huge number of bone fractures caused by progressive population ageing and diseases i.e., osteoporosis. The bioactive and biomimetic materials design modulating cell behaviour can support healthy bone tissue regeneration. In this frame, type I collagen and hydroxyapatite (HA) have been often combined to produce biomimetic scaffolds. In addition, mesoporous bioactive glasses (MBGs) are known for their ability to promote the deposition of HA nanocrystals and their potential to incorporate and release therapeutic ions. Furthermore, the use of 3D printing technologies enables the effective design of scaffolds reproducing the natural bone architecture.

This study aims to design biomimetic and bioactive 3D printed scaffolds that mimic healthy bone tissue natural features in terms of chemical composition, topography and biochemical cues. Optimised collagenous hybrid systems will be processed by means of extrusion 3D printing technologies to obtain high resolution bone-like structures. Protocols of human co-cultures of osteoblasts and osteoclasts will be developed and used to test the 3D scaffolds.

Type I collagen has been combined with rod-like nano-HA and strontium containing MBGs (micro- and nano-sized particles) in order to obtain hybrid systems resembling the composition of native bone tissue. A comprehensive rheological study has been performed to investigate the potential use of the hybrid systems as biomaterial inks. Mesh-like structures have been obtained by means of extrusion-based technologies exploiting the freeform reversible embedding of suspended hydrogels (FRESH) approach. Different crosslinking methods have been tested to improve final constructs mechanical properties. Both crosslinked and non-crosslinked biomaterials were cultured with human osteoblasts and osteoclasts to assay the hybrid matrix biocompatibility as well as its influence on cell behaviour.

Homogeneous hybrid systems have been successfully developed and characterised, proving their suitability as biomaterial inks for 3D printing technologies. Mesh-like structures have been extruded in a thermo-reversible gelatine slurry, exploiting the sol-gel transition of the systems under physiological conditions. Covalent bonds between collagen molecules have been promoted by genipin treatment, leading to a significant increase in matrix strength and stability. The collagen methacrylation and the further UV-crosslinking are under investigation as alternative promising method to reinforce the 3D structure during the printing process. Biological tests showed the potential of the developed systems especially for genipin treated samples, with a significant adhesion of primary cells.

Collagenous hybrid systems proved their suitability for bioactive 3D printed structures design for bone tissue engineering. The multiple stimuli provided by the scaffold composition and structure will be investigated on both direct and indirect human osteoblasts and osteoclasts co-culture, according to the developed protocols.


Orthopaedic Proceedings
Vol. 100-B, Issue SUPP_14 | Pages 77 - 77
1 Nov 2018
Molino G Dalpozzi A Ciapetti G Fiorillia S Vitale-Brovarone C
Full Access

Osteoporosis is a worldwide disease with a high prevalence in elderly population; it results in bone loss and decreased bone strength that lead to low-energy fractures. Since antiresorptive treatments could lead to long-term adverse effects, the ERC BOOST project aims to propose a biomimetic 3D-printed scaffold reproducing the architecture and chemistry of healthy bone. In this study, the structural parameters of healthy bone were studied in order to reproduce them through 3D printing; furthermore, structural and mechanical differences between healthy and osteoporotic (OP) bones were assessed. Healthy and OP humeral heads discarded during surgical interventions (following ethical approval by Istituto Ortopedico Rizzoli-Italy) were tomographically analysed to obtain bone structural parameters. Successively, 8 mm diameter biopsies were harvested from the heads and underwent compression and nanoindentation tests to investigate macroscopic and microscopic mechanical properties, respectively. XRD measurements were performed on bone fragments. OP bone samples exhibited inferior mechanical properties to their less interconnected and more anisotropic structure, with thinner trabeculae and larger pores. On the other hand, nanoindentations performed on OP trabeculae showed increased Young Modulus compared to healthy samples probably due to their increased hydroxyapatite crystal size, as revealed by XRD. Osteoporosis causes the weakening of the trabecular structure that leads to a decrease of bone mechanical properties. However, OP trabeculae are stiffer due to increased dimensions of hydroxyapatite crystals.


Orthopaedic Proceedings
Vol. 100-B, Issue SUPP_14 | Pages 28 - 28
1 Nov 2018
Vitale-Brovarone C
Full Access

Osteoporosis is a worldwide spread, silent disease steadily increasing due to demographic shift; it results in bone loss and increased porosity that lead to an increase in bone fragility and to low-energy fractures. In such a contest, we worked on the development of 3D scaffolds engineered to mimic the features of human healthy bone. Healthy and osteoporotic bone microCT scans were obtained from tissues discarded during surgical interventions (Istituto Ortopedico Rizzoli-Italy). The obtained .STL file was used to 3D print a type I collagen solution to mimic bone matrix whereas mesoporous bioactive glass/nano-hydroxyapatite were embedded within the collagen fibers to mimic the inorganic phase of human bone. The rheological properties of the Type I collagen/mesoporous glass suspensions were investigated at different collagen concentration and temperatures. The possibility of incorporating growth factors (IGF and β-TGF) in the scaffold struts was investigated proposing several approaches and their retained activity was assessed. Different co-culture of osteoblasts and osteoclasts set-ups were explored in order to define the influence of both chemical and topographical stimuli on the osteoblast-osteoclast coupling.