Polyethylene wear-debris induced inflammatory osteolysis is known as the main cause of aseptic loosening and long term revision total hip arthroplasty. Although recent reports suggest that antioxidant impregnated ultra-high molecular weight polyethylene (UHMWPE) wear-debris have reduce the osteolytic potential in vivo when compared to virgin UHMWPE, little is known about if and/or how PE rate of oxidation affects osteolysis in vivo. We hypothesized that oxidized UHMWPE particles would cause more inflammatory osteolysis in a murine calvarial bone model when compared to virgin UHMWPE. Male C57BL/6 eight weeks old received equal amount of particulate debris overlaying the calvarium of (n=12/group): sham treatment (no particles), 2mg (6,75×107 particles/mg) of endotoxin-free UHMWPE particles (PE) or of endotoxin-free highly oxidized-UHMWPE (OX) particles. In vivo osteolysis was assessed using high resolution micro-CT and inflammation with L-012 probe dependent luminescence. At day 10, calvarial bone was examined using high resolution micro-CT, histomorphometric, immunohistochemistry analyses and qRT-PCR to assess OPG, RANK, RANK-L, IL-10, IL-4, IL-1b and TRAP genes expression using the protocol defined by individual TaqManTM Gene Expression Assays Protocol (Applied Biosystems). In vivo inflammation was significantly higher in the OX (1.60E+06 ± 8.28E+05 photons/s/cm2) versus PE (8.48E+05 ± 3.67E+05) group (p=0.01). Although there was a statistically significant difference between sham (−0.27% ± 2.55%) and implanted (PE: −9.7% ± 1.97%, and OX: − 8.38% ± 1.98%) groups with regards to bone resorption (p=0.02), this difference was not significant between OX and PE (p = 0.14). There was no significant difference between groups regarding PCR analyses for OPG, RANK, RANK-L, IL-10, IL-4, IL-1b and TRAP (p = 0.6, 0.7, 0.1, 0.6, 0.3, 0.4, 0.7 respectively). Bone volume density was significantly decreased in PE (13.3%±1.2%) and OX (12.2%±1.2%) groups when compared to sham (15%±0.9%) (p < 0 .05). Histomorphometric analyses showed a significantly decreased Bone Thickness/Tissue Thickness ratio in the implanted group (0.41±0.01 mm and 0.43±0.01 mm) compared to sham group (0.69± 0.01) (p < 0 .001). However, there were no significant difference between OX and PE (p = 0.2). Our findings suggest that oxidized UHMWPE particles display increased inflammatory potential. Results were not significant regarding in vivo or ex vivo osteolysis. As antioxidant-diffused UHMWPE induce less inflammation activity in vivo, the mechanism by which they cause reduced osteolysis requires further investigation.
To compare the therapeutic potential of tissue-engineered constructs (TECs) combining mesenchymal stem cells (MSCs) and coral granules from either Bone marrow-derived, autologous MSCs were seeded on Objectives
Materials and Methods
Bone tissue engineering constructs (BTEC) combining natural resorbable osteoconductive scaffolds and mesenchymal stem cells (MSCs) have given promising results to repair critical size bone defect. Yet, results remain inconsistent. Adjonction of an osteoinductive factor to these BTEC, such as rh-BMP-2, to improve bone healing, seems to be a relevant strategy. However, currently supraphysiological dose of this protein are used and can lead to adverse effects such as inflammation, ectopic bone and/or bone cyst formation. Interestingly, in a preliminary study conducted in ectopic site in a murine model, a synergistic effect on bone formation was observed only when a low dose of rh-BMP-2 was associated with MSCs-seeded coral scaffolds but not with a high dose. The objective of the study was then to evaluate a BTEC combining coral scaffold, MSCs and a low dose of rh-BMP-2 in a large animal model of clinical relevance. Sixteen sheep were used for this study. MSCs were isolated from an aspirate of bone marrow harvested from the iliac crest of each sheep receiving BTEC with MSCs, cultivated and seeded on Rh-BMP-2, used at two different doses (low dose: 68μg/defect and high dose: 680μg/defect), was diluted and absorbed on Metatarsal segmental bone defects (25 mm) were made in the left metatarsal bone of the sheep, stabilized by plate fixation, and filled with Bone volumes (BV) evaluated by μCT and bone surfaces (BS) evaluated by histomorphometry did not differ between groups (BV: 1914±870, 1737±841, 1894±1028 and 1835±1342 mm3; BS: 25,41±14,25, 19,85±8,31, 25,54±16,98 and 26,08±22,52 %; groups 1, 2, 3 and control respectively); however, an higher bone union was observed in group 1 compared to the others (3, 1, 2 and 2 sheep with bone union in groups 1, 2, 3 and control respectively). No histological abnormalities were observed in any group. Coral resorption was almost complete in all specimens. No significant difference in coral volumes and coral surfaces was observed between groups. A trend towards a higher variability in coral resorption was noted in group 1 compared to the others. There seems to be a benefit to associate low dose of rh-BMP-2 with MSCs-seeded coral scaffolds as this strategy allowed an increase of bone unions in our model. Yet, results remain inconsistent. Although, defective coupling between scaffold resorption and bone formation impaired bone healing in some animals, adjunction of rh-BMP-2 (even at low dose) to CSMs loaded construct is a promising strategy for bone tissue engineering.
MSCs could promote bone regeneration in sheep when loaded on natural fully-resorbable scaffolds, but results are highly variable. Improving the ultimate performance of cell-containing constructs cannot be limited to the decreased rate of scaffold resorption. Introduction. Tissue constructs containing mesenchymal stem cells (MSCs) are an appealing strategy for repairing massive segmental bone defects. However, their therapeutic effectiveness does not match that of autologous bone grafts; among the failure reasons the scaffold resorbability has been identified as a critical feature for achieving bone regeneration. In the present study, the osteogenic potential of 2 constructs obtained by expanding in a bioreactor autologous MSCs onto granules of Acropora or Porites coral, natural fully-resorbable scaffolds, was compared. 15 sheep underwent a 25 mm long metatarsal ostectomy stabilised with a 3.5 DCP plate. Bone defects were replaced with (i) MSCs-Acropora constructs (n=7), (ii) MSCs-Porites constructs (n=6), (iii) autograft (n=2). Animals were sacrificed 4 months later and bone healing and coral resorption was documented by radiographic, histologic and microCT studies.Summary
Materials and methods
In this study, we challenged the current paradigm of human Mesenchymal Stem Cells survival, which assigned a pivotal role to oxygen, by testing the hypothesis that exogenous glucose may be key to their survival. The survival of human mesenchymal stem cells (hMSCs) has elicited a great deal of interest, because it is relevant to the efficacy of engineered tissues. However, to date, hMSCs have not met this promise, in part due to the high death rate of cells upon transplantation. In this study, we challenged the current paradigm of hMSC survival, which assigned a pivotal role to oxygen, by testing the hypothesis that exogenous glucose may be key to hMSC survival.Summary
Introduction
Despite similar, early and massive death, hMSCs promote bone formation which was higher in orthotopic than ectopic site suggesting a trophic effect of hMSCs. Ectopic implantation is suitable to evaluate cell survival, but assessment of bone formation requires orthotopic implantation Tissue constructs containing mesenchymal stem cells (MSCs) are appealing strategies for repairing large segmental bone defects but they do not allow consistent bone healing and early and massive MSCs death was identified as a cause of failure. However, little is known about cell survival in the clinical micro-environment encountered during bone healing process, whereas ectopic evaluation is well documented.
Summary
Introduction
The use of mesenchymal stem cells (MSCs) loaded on osteoconductive scaffolds has emerged as a potential new treatment of large bone defects but has generated marginally successful results in terms of new bone formation. It is supposed that MSC massive death post implantation is a major obstacle for the exhibition of their osteogenic potential. Yet, the very few studies conducted using primary human MSCs derived from bone marrow (hMSCs), a clinically pertinent cell source, did not demonstrate that cell survival is required for new bone formation. In order to elucidate whether cell survival is needed for hMSC to express their osteogenic potential, the present study examined in an ectopic mouse model the relationship between cell survival and osteogenic potential of hMSCs loaded onto osteoconductive scaffold. hMSCs (106) were seeded on 40-mg calcium carbonate (Biocoral) particles (size: 610–1000 µm), wrapped in fibrin gel (Baxter), and implanted subcutaneously into immunodeficient (nu/nu) mice (n=8/group). The fate of implanted cells was analysed using the bioluminescence and immunohistochemistry. For this, hMSCs were transduced with Luc-GFP (Luciferase-Green fluorescent protein) lentiviral vectors prior to experimentation. Bone formation was analysed 8 weeks post implantation on both non-decalcified and decalcified samples.Introduction
Materials and Methods
The present study demonstrated the feasibility of culturing a large number of standardised granular MSC-containing constructs in a packed bed/column bioreactor that can produce sheep MSC-containing constructs to repair critical-size bone defects in sheep model. Endogenous tissue regeneration mechanisms do not suffice to repair large segmental long-bone defects. Although autologous bone graft remains the gold standard for bone repair, the pertinent surgical technique is limited. Tissue constructs composed of MSCs seeded onto biocompatible scaffolds have been proposed for repairing bone defects and have been established in clinically-relevant animal models. Producing tissue constructs for healing bone defects of clinically-relevant volume requires a large number of cells to heal an approximately 3 cm segmental bone defect. For this reason, a major challenge is to expand cells from a bone marrow aspirate to a much larger, and sufficient, number of MSCs. In this respect, bioreactor systems which provide a reproducible and well-controlled three-dimensional (3D) environment suitable for either production of multiple or large size tissue constructs are attractive approaches to expand MSCs and obtain MSC-containing constructs of clinical grade. In these bioreactor systems, MSCs loaded onto scaffolds are exposed to fluid flow, a condition that provides both enhanced access to oxygen and nutrients as well as fluid-flow-driven mechanical stimulation to cells. The present study was to evaluate bioreactor containing autologous MSCs loaded on coral scaffolds to repair critical-size bone defects in sheep model.Short Summary
Introduction
Shear stress and hydrostatic effects on the hMSCs early mechano gene response were similar. For the same magnitude gene response, the hydrostatic compression (1.5×105 Pascal) is a 200000 times greater than the force exerted by shear stress (0.7 Pascal). In the lab, a perfusion bioreactor designed to automate the production of bone constructs was developed. The proof of concept was established in a large animal model of clinical relevance. The cells perfused in the bioreactor are likely to perceive 2 types of stresses: shear stress and hydrostatic pressure. Optimization of this bioreactor implies a better understanding of the effects of these forces on the cells in order to have better proliferation and differentiation. An understanding of the response of one cell layer submit to various strength is relevant. The primary objective of this study was to test the hypothesis that hMSCs have the fundamental ability to distinguish between different types of mechanical signals as evidenced by distinct gene expression. The effect of shear stress on one cell layer cultures of hMSCs will be evaluated using a commercially available system called Ibidi. For the hydrostatic pressure as there is no commercial device available, our group has developed a prototype capable of delivering a well-defined mechanical loading to cells in culture. Validation of the techniques: In order to validate the systems (shear stress and cyclic pressure apparatus) used in this study, we have used an osteocytes-like cell line, MLO-Y4. When stimulated by a 30 minutes PFF at 7 dyn/cm2 or hydrostatic compression at 1.5 bar, cells responded by producing NO in the culture media NO release after mechanical stimulation of hMSCs: hMSCs were subjected to increased PFF (7 to 42 dyn/cm2) for 30 minutes. This stimulation resulted in an increased release of NO in the media compared to non-stimulated cells (p<0.05). Interestingly the level of NO was maximal at 7 dyn/cm2 and decreased with higher flow rate. Similar observation was made after hMSCs stimulation by hydrostatic pressure for 30 minutes: a peak of NO release at 1.5 bar was observed Early gene expression of known mechano-sensitive genes: Gene expression analysis immediately after stimulation (PFF or hydrostatic compression) was performed on a range of known mechano-sensitive genes: NOS2, PTGS2, PTGES, IER3 and EGR1. Immediately after stimulation by PFF at 7 dyn/cm2 or hydrostatic pressure at 1.5 bars, the expression of all the genes of interest appear to be up regulated in stimulated cellsSummary
Introduction
Osteoporosis is a metabolic disease of the bone responsible for a loss of bone resistance and an increase in fracture risk. World Health Organization (WHO) estimations are about 6.3 millions of femoral neck fractures in the world by 2050. These estimations make osteoporosis a real problem in term of public health. Knowledge in biological tissues mechanical behaviour and its evolution with age are important for the design of diagnosis and therapeutic tools. From the mechanical aspect, bone resistance is dependent on bone density, bone architecture and bone tissue quality. If the importance of bone density and bone architecture has been well explored, the bone tissue quality still remains unstudied because of the lack of biomechanical tools suitable for testing bone at this microscopic dimension. Therefore the goal of this study is to estimate the osteoporotic cancellous bone tissue mechanical behaviour at its microscopic scale, using an approach coupling mechanical assays and digital reconstruction. The experimental study is based on cancellous bone tissue extracted from human femoral head. Forty 8mm diameters bone cylinders have been removed from femoral head explanted after a femoral neck fracture treated by arthroplasty. These cylinders have been submitted to a digitally controlled compressive trial. Before and after the trials, microscanner analyses with an 8 μm spatial resolution have been realized in order to determine the micro structural parameters. The cylinders have been rebuilt with the digital model-building in order to estimate the mechanical behaviour and the bone quality.Introduction
Materials and methods
