Advertisement for orthosearch.org.uk
Results 1 - 7 of 7
Results per page:
Applied filters
Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 90-B, Issue SUPP_III | Pages 449 - 449
1 Aug 2008
Gowda VP Kumar A Kakarala G Fraser AM Kumar N
Full Access

We describe results of a new ‘two needle technique’ of selective nerve root blocks done through posterior triangle of neck in the management of cervical radiculopathy with 2 year results.

Methods: Patients presenting with cervical radiculopathy were evaluated clinically and radiologically and were initially managed with supervised physiotherapy, analgesics and rest. Selective cervical nerve root block was offered to the patients, who did not respond to conservative management. The procedure was performed as a day case, under local anesthesia, with image intensifier guidance, using ‘two needle technique’. A thinner needle is rail-roaded through the lumen of large diameter guide needle to reach the target nerve root foramen and a mixture of Bupivacaine and Triamcinolone acetonide is injected. The outcome was measured using visual analogue score (VAS) and neck disability index (NDI) done on the day of the procedure and compared to the scores at 3 months and 1 year after the procedure.

Results: Outcome in 30 patients who underwent this procedure over three years’ period is presented. Average Visual Analogue Score was 7.36 (range 6 – 10) before the intervention, which improved to 2.27 (range 0 – 7) at 3 months and 1.9 (range 0 – 4) at 1 year. The average Neck Disability Index score prior to intervention was 66.87 (range 44 to 82), which improved to 31.67 (range 18 – 66) at 3 months and 30.44 (range 20 – 48) at 1 year. There were no major complications noted. We conclude that selective cervical nerve root block using ‘two-needle technique’ is safe and reproducible. The therapeutic effect achieved is long lasting, making this procedure a good alternative to surgical management in patients with cervical radiculopathy who do not respond to conservative management.


Orthopaedic Proceedings
Vol. 90-B, Issue SUPP_II | Pages 335 - 335
1 Jul 2008
Arya A Kakarala G Kulshreshtha R Groom G Sinha J
Full Access

Proximal humeral fractures are common injuries but there is no general agreement on the best method for fixing unstable and displaced 3 & 4 part fractures. A new implant – Proximal Humeral Internal Locking System (PHILOS) – has recently been introduced to fix these fractures. The aim of this study was to assess the effectiveness of the PHILOS plate in the surgical treatment of these fractures.

We operated upon 36 patients between March 2002 and December 2004. 33 of them were available for follow up, which ranged from 12–45 months. Assessment at follow up included radiological review, Constant and DASH scoring.

While recovery of movements and relief in pain was satisfactory, the strength of shoulder did not recover fully in any patient. There were two failures in our series, one due to breakage of plate. 4 patients have shown radiological signs of avascular necrosis of humeral head. The plate was removed in 4 patients due to impingement and / or mechanical block in abduction. Another 2 patients had to undergo arthroscopic subacromial decompression for the same reasons. We encountered the problem of cold welding and distortion of screw heads, while removing the PHILOS plate.

The broken plate was subjected to biomechanical and metallurgical analysis, which revealed that the plate is inherently weak at the site of failure.

The PHILOS plate does have inherent advantages over other implants for fixation of 3 and 4 part proximal humeral fractures but we are not convinced about its strength. Design of its proximal screws also appears less than satisfactory. The plate may cause impingement in some patients necessitating its removal later on, which itself may not be easy.


Orthopaedic Proceedings
Vol. 88-B, Issue SUPP_III | Pages 414 - 414
1 Oct 2006
Kakarala G Toms A Chue L Kuiper JH
Full Access

Introduction: Bio mechanical tests under realistic loading conditions of prostheses in bone can help to improve the design of joint implants. Cadaveric bones are most realistic but highly variable and difficult to obtain and conventional bone models have been used so far. Stereo lithography (SLA) techniques are used in industry to generate 3-D rapid prototypes. These techniques could serve to produce bones with complex geometries, but the material used is less stiff than cortical bone.

Aim: The purpose of the study was to answer the following two questions? 1. Does stability of and cortical strains around implants in SLA-made bones matched those of conventional artificial bones? 2. Whether increasing cortical wall thickness brings these variables closer?

Methods: Four artificial cortical shells of proximal tibiae were made from resin (SL5170, 3D systems Europe Ltd., Hemel Hempstead, UK) using SLA process. Two third generation large composite tibiae #3302 (Sawbones Europe AB, Malmö, Sweden) were chosen and the polyurethane foam that represents the cancellous bone was removed. All six cortices were filled with polyurethane foam (Tripor 224, ABL (STEVENS), Cheshire, UK) with an average compressive modulus of 53.9±7.2 SD MPa. The tibiae were prepared to receive a standard size cemented tibial tray for all models. The models were loaded with 100 cycles of 2000 N at 1 Hz along the longitudinal axis, separately on the lateral and on the medial condyle. Medial cortical strain and tray migration during load was determined.

Results: Cyclic loading gave a general pattern of cyclic movements, superimposed on a very small permanent movement. The first cycle gave most permanent displacement, after which further migration occurred at a decreasing rate. Permanent and cyclic migration of all four trays implanted in SLA-made tibiae fell within the range of those implanted in conventionally available tibiae. Strains at the proximal medial cortex were low and on the same order for all six tibiae. Strains more distally were approximately inversely proportional to the material stiffness and cortical thickness of the tibiae.

Conclusion: The study concludes that migration of tibial trays in all SLA models was with in the range of those in conventional models. Hence these models can be used to test early mechanical stability of joint implants despite their lower stiffness. The small difference may be related to load bearing mechanism of tibial trays which is largely through cancellous bone and not cortical bone. The low strains at the proximal cortex in this study also suggest that the cortex carried little direct load. The polyurethane foam representing cancellous bone in our study was identical for each tibia, which may explain that movements of the trays were comparable. Distal cortical strains reflected the stiffness of the tibiae and were directly influenced by cortical thickness.


Orthopaedic Proceedings
Vol. 88-B, Issue SUPP_II | Pages 275 - 275
1 May 2006
Arya A Kakarala G Sinha J
Full Access

Proximal humeral non-unions are uncommon, but when they occur they are disabling and often present a surgical challenge.

We have treated 55 cases of proximal humeral fractures by internal fixation from March 2002 to March 2004. Of these, 18 were non-unions out of which 16 were treated using AO Cannulated blade plate and bone grafting. Results of these patients are presented in this report.

14 out of 16 were available for follow up, which ranged from 18–30 months. Patients were regularly reviewed clinically and radiologically and had constant and DASH scoring at final follow up. Average Constant score was 64 and DASH score was 35.3. Range of movement recovered to 50% or more in every patient but only 3 had full range of movements. Maximum recovery in the strength of shoulder muscles measured with myometer was about 75% as compared to other side. Although X-rays showed sound bony healing in all but one case, none of the patients was completely symptom free at final review. However, they were all satisfied with the outcome of their operation.

Stable internal fixation is the key to success of surgical treatment of non-unions. We are satisfied with the usefulness of AO cannulated blade plate in providing a rigid fixation in our cases. However, it is difficult to achieve perfect results in terms of pain relief and recovery of normal function due to various reasons, which would be highlighted in our presentation. The report would also discuss the technical difficulties encountered in using this implant.


Orthopaedic Proceedings
Vol. 88-B, Issue SUPP_I | Pages 24 - 24
1 Mar 2006
Kakarala G Elias D
Full Access

Introduction: The unique architecture of the tarsometa-tarsal joints gives rise to a complex articulation between the midfoot and forefoot. The Lisfranc injury has a classic pattern leaving its telltale signs in an arch pattern starting at the medial cuneiform, continuing through the second, third and fourth tarsometatarsal regions and finally may end as a fracture of the cuboid. However, various other patterns and classifications of Lisfranc fracture dislocation have been recorded in medical literature.

Aim: To highlight the hitherto undescribed arch patterns of Lisfranc injuries.

Methodology: 8 patients with atypical Lisfranc injuries were studied prospectively.

Arch patterns: In 2 patients the arch started at the medial aspect of the ankle with injury to the medial malleolus or the deltoid ligament, passed through the tarsometatarsal region and ended at the cuboid. In one patient the arch started at the tarsometatarsal joints and ended at the lateral malleolus and in another patient the lateral end point resulted in tear of the calcaneofibular ligament. One patient had the medial starting point at the Lisfranc ligament but the arch of injuries went through the forefoot fracturing the midshaft of the 2nd, 3rd and 4th metatarsal shafts without injuring the tarsometatarsal region, thus forming an arch pattern much more distal than usual. Six of the 8 patients had operative management. On follow up, in terms of activities of daily living, 75% had excellent function of the foot. It is not the aim of this paper to highlight the management of these injuries.

Conclusion: In the process of listing the telltale signs of a Lisfranc injury it is mandatory to bear in mind that the arch of injuries may extend to as proximal as the ankle joint or as distal as the forefoot and this will enable us to define the entire spectrum of the Lisfranc injury, however atypical it may be.


Orthopaedic Proceedings
Vol. 88-B, Issue SUPP_I | Pages 37 - 37
1 Mar 2006
Singh R Kakarala G Persaud I Roberts M Standring S Compson J
Full Access

Suture anchors have changed the practice of repair of tendons in modern Orthopaedics. The purpose of the study was to identify the ideal suture anchor length for anchoring flexor digitorum profundus tendon to the distal phalanx.

We dissected 395 distal phalanges from 80 embalmed hands. Phalanges from two little fingers and three thumbs were damaged, hence were excluded from the study. We measured the Anteroposterior and Lateral dimensions at three fixed points on the distal phalanges of all 395 fingers using a Vernier’s Callipers with 0.1mm accuracy.

The mean value of the Anteroposterior width of the distal phalanx at the insertion of the FDP was found to be 3.4mm for the little finger; 3.9mm for the ring finger; 4.3mm for the middle finger; 4.0mm for the index finger and 5.0mm for the thumb respectively. The commonly available anchors and drill bits were found to be too long when used for anchoring the flexor digitorum profundus tendon in certain distal phalanges. Our findings may be a reason for poor outcome of FDP repair to distal phalanx using suture anchors. New designs for tissue anchors for distal phalanges may be necessary.


Orthopaedic Proceedings
Vol. 88-B, Issue SUPP_I | Pages 35 - 35
1 Mar 2006
Arya A Kakarala G Singh R Persaud I Kulshreshtha R Reddy S Compson J
Full Access

Disorders of the pisotriquetral joint can cause ulnar sided wrist pain. This joint is not usually seen during routine wrist arthrosopy because it often has a separate joint cavity. The senior author believes that it is more commonly seen from the 6R portal if looked for, than one would expect from the assumed anatomy.

This study assessed the frequency with which the pisotriquetral joint could be observed in 36 consecutive wrist arthroscopies. The connection between the radiocarpal and the pisotriquetral joint were found to vary from a complete membrane separating the two, to no membrane at all, with variations in between. The types of connections are described. The anatomy of the connections was also studied by dissecting the wrist joints of eight fresh frozen cadavers. The findings matched the arthroscopic observations.

In more than 50% of patients, the pisotriquetral joint could be clearly visualised by arthroscopy. The technique and findings have been recorded on video and form part of the presentation.