Introduction

The degree of cartilage degeneration assessed intraoperatively may not be sufficient as a criterion for patellar resurfacing in total knee arthroplasty (TKA). However, single-photon emission tomography/computed tomography (SPECT/CT) is useful for detecting osteoarthritic involvement deeper in the subchondral bone. The purpose of the study was to determine whether SPECT/CT reflected the cartilage lesion underneath the patella in patients with end-stage osteoarthritis (OA) and whether clinical outcomes after TKA without patellar resurfacing differed according to the severity of patellofemoral (PF) OA determined by visual assessment and SPECT/CT findings.

Background

As the number of primary or revision TKA with stem extension cases are growing simultaneously, the number of periprosthetic fracture in these cases has also increased accordingly. However, there have been few reports on the classification and treatment of periprosthetic fracture following stemmed TKA and lack of information about the treatment outcome. The purposes of this study were 1) to demonstrate classification and management of periprosthetic fractures after stemmed TKA and 2) to report treatment outcome after the periprosthetic fractures.

For the management of displaced patellar fractures, surgical fixation using cannulated screws along with anterior tension band wiring is getting popular. Clinical and biomechanical studies have reported that using cannulated screws and a wire instead of the modified tension band with Kirschner wires improves the stability of fractured patellae. However, the biomechanical effect of screw proximity on the fixed construction remains unclear. The aim of this study was to evaluate the mechanical behaviors of the fractured patella fixed with two cannulated screws and tension band at different depths of the patella using finite element method.

A patella model with simple transverse fracture [AO 34-C1] was developed; the surgical fixation consisted of two 4.0-mm parallel partial-threaded cannulated screws with a figure-of-eight anterior tension band wiring using a 1.25-mm stainless steel cable. Two different locations, including the screws 5-mm and 10-mm away from the leading edge of the patella, were used. A tension force of 850 N was applied on the patellar apexes at two loading angles (45° and 0° [parallel] to the long axis) to simulate different loading conditions while knee ambulation. The proximal side (base) of the patella was fixed, and the inferior articular surface was defined as a compression-only support in ANSYS to simulate the support from distal femur condyles. Compression-only support enables the articular surfaces of the present patella to only bear compression and no tension forces.

Under different loading conditions, the fixed fractured patella yielded higher stability during 0° loading of tension force than during 45° loading. When the screws were parallel placed at the depth of 5 mm away from the patellar surface, the deformation of patellar fragment and maximum gap opening at the fracture site were smaller than those obtained by screws placed at the depth of 10 mm away from the patellar surface. Compared to the superficial screw placement, the deeper placement (10 mm) increased the maximum gap opening at the fracture site by 1.56 times under 45° loading, and 1.58 times under 0° loading. The load on the tension band wire of the 10-mm screw placement was 3.12 times (from 230 to 717 N) higher than that of the 5-mm placement. Under the wire, the contact pressure on the patellar surface was higher with the 10-mm screw placement than the 5-mm screw placement. The peak bone contact pressures with the 10-mm placement were 7.7 times (99.5 to 764 MPa) higher.

This is the first numerical study to examine the biomechanical effects of different screw locations on the fixation of a fractured patella using screws and tension band. Based on a higher stability and lower cable tension obtained by the superficial screws placement, the authors recommended the superficial screw placement (5 mm below the leading edge of the patella) rather than the deep screws while fixing the transverse patellar fracture with cannulated screws and cable.

Background

Joint line, patellar height and posterior condylar offset (PCO) are related to functional outcome such as stability and range of motion after revision total knee arthroplasty (TKA). The purpose of this study was (1) to determine whether revision TKA can restore the joint line, patella height and condylar offset after surgery, and (2) to assess factors associated with failed restoration.

Introduction

With the introduction of new technology in orthopaedics, surgeons must balance anticipated benefits in patient outcomes with challenges or complications associated with surgical learning curve for the technology. The purpose of this study was to determine whether the surgeon learning curve with a new multi-radius primary TKA system (primary TKA implant and instruments) designed for surgical team ease would impact clinical outcomes, surgical time and complications.

With the introduction of new technology in orthopaedics, surgeons must balance anticipated benefits in patient outcomes with challenges or complications associated with surgical learning curve for the technology. The purpose of this study was to determine whether surgeon learning curve with a new multi-radius primary TKA system and instruments designed to improve surgical team ease would impact clinical outcomes, surgical time, and complications.

From November 2012 to July 2015, 2369 primary TKAs were prospectively enrolled in two multicentre studies across 50 sites in 14 countries with a new knee system (NEW-TKA) evenly balanced across four configurations: cruciate retaining or posterior stabilised with either fixed bearing or rotating platform (CRFB, CRRP, PSFB, PSRP). 2128 knees had a<1 year visit and 1189 had a minimum 1 year visit. These knees were compared to a reference dataset of 843 primary TKAs from three manufacturers in the same four configurations with currently available products (CA-TKA). Demographics for NEW-TKA and CA-TKA were similar and typical for primary TKA. Operative times, clinical outcomes and a series of five patient reported outcomes were compared for NEW-TKA vs. CA-TKA. The first 10 New-TKA subjects for each surgeon were defined as learning curve cases (N=520) and were compared to all later subjects (N=1849). Patient reported outcome measure and clinical outcome analyses were covariate adjusted for patient demographics, pre-op assessment and days post-op.

Mean (SD) surgical time for NEW-TKA learning curve cases was 79.1 (24.3) minutes, which reduced thereafter to 73.6 (24.3) (p=0.002). Beyond 10 cases, there was a continued reduction in NEW-TKA surgical time (R-Squared = 0.031). After 10 cases, surgical time was on par with the mean (SD) 71.9 (21.6) for CA-TKA (p=0.078). PROM outcomes of the first 10 learning curve cases for NEW-TKA were not statistically different from later cases at less than 1 year or later when adjusted for relevant covariates including configuration, patient demographics, pre-op functional status, and time post-op (p-values > 0.01). PROM outcomes for NEW-TKA vs. CA-TKA under the same covariate adjustments showed a trend favoring KOOS ADL, Symptoms, and Sport and Recreation subscores at minimum 1 year (p-values < 0.01). The incidence of intraoperative operative site complications was 1.3% for the NEW-TKA learning curve cases which was similar to the 0.6% rate for historical CA-TKA (p=0.231) and the intraoperative complication rate for the NEW-TKA later cases was consistent with learning curve cases (p=0.158).

The introduction of new implants into the market place needs to have adequate data to support that they are safe and effective. Except for a minor increase in surgical time during the first 10 patients, this study found that surgeon learning curve with this new primary TKA system does not adversely affect patient short term outcomes and complication rates.

Introduction

Deformity of knee joint causes deviation of mechanical axis in the coronal plane, and the mechanical axis deviation also could adversely affect biomechanics of the ankle joint as well as the knee joint. Particularly, most of the patients undergoing total knee arthroplasty (TKA) have significant preoperative varus malalignment which would be corrected after TKA, the patients also may have significant changes of ankle joint characteristics after the surgery. This study aimed 1) to examine the prevalence of coexisting ankle osteoarthritis (OA) in the patients undergoing TKA due to varus knee OA and to determine whether the patients with coexisting ankle OA have more varus malalignment, and 2) to evaluate the changes of radiographic parameters for ankle joint before and 4 years after TKA.

Introduction

Even a number of studies have reported clinical outcomes after revision total knee arthroplasty (revision TKA), little information is still available on whether outcomes of patients undergoing a revision TKA as a second stage procedure because of infected TKA are poorer than those of the patients undergoing a single-stage revision TKA because of non-infectious causes. In addition, use of various revision prostheses in most previous studies may limit solid interpretation of the outcomes after revision TKA. This study sought to determine whether outcomes in patients undergoing revision TKA due to infected TKA would be different from those in patients undergoing revision TKA due to non-infectious causes.

Introduction

Total knee arthroplasty (TKA) is a proven treatment method for advanced knee arthritis in terms of pain relief, function restoration, and quality-of-life improvement. The TKA use has increased significantly over the past decade and the growing rate is more prominent in Asian countries. Thus, the revision TKA may also increase in recent days, which represents a burden to the national health care system. To the best of our knowledge, little information is currently available regarding the incidence and related factors of revision TKA in Asian countries on the basis of nationwide database. This study sought to find the incidence of revision TKA and related factors in South Korea using national database from 2007 to 2012.

Total knee arthroplasty(TKA) is a major surgery and the postoperative pain can be severe. Inadequate pain relief may lead to delayed mobilisation, greater risk of developing deep vein thrombosis, coronary ischemia, poor wound healing, longer hospital stay and decreased patient satisfaction. Severe postoperative pain also increase the risk of developing long term persisting pain. Conventional pain managements with intermittent parenteral opioids and non-steroid anti-inflammatory drugs have been proved to be less effective and are often lead to unwanted side effect. Currently, there is a trend to use multimodal pain management to minimize narcotic consumption and to avoid narcotic-related side effects. The use of transdermal opioid patch has not been well established. The purpose of this study was to investigate the analgesic effects of various transdermal non-opioid patches in patients after elective total knee arthroplasty in a prospective, randomised control trial.

After receiving Institutional Review Board approval, 89 patients(89 knees) received primary unilateral total knee arthroplasty were included in this study. All patients were randomly allocated into three groups. The 3 groups were demographically similar for sex, age, and body mass index. They received patches with 5% lidocaine, flurbiprofen and only vehicle patches without any medication. The patches were placed on the tourniquet area postoperatively, then on patient-directed area of discomfort every 6–8 hours. Each patient received the same standard postoperative analgesics including single intra-articular injection, NSAID, acetaminophen, and rescue opioids as needed. All patients were interviews everyday and the primary outcome was the visual analog scale. Besides, consumption of rescue opioids, progress of active movement, and inpatient stay were also recorded. Our hypotheses were transdermal non-opioid patches would provide effective pain relief and reduce the consumption of opioids as well as their side effects.

There were 30, 29, and 30 patients in group I, II and III. The mean ischemic time(tourniquet time) was 56.0, 61.4, 55.5 minutes, respectively. The narcotics consumptions were 11.77, 20.12, and 15.57 mg, respectively. The day achieved active flexion to 90 degrees were 1.83, 1.97, and 2.03 days, respectively. The inpatient stay was 6.47 days for group I patients, 6.81 days for group II patients, and 6.77 days for group III patients. The mean episodes of breakthrough pain(VAS>4) were 3, 3, and 3.7 times, respectively. There was no related adverse effects occurred with the use of non-opioid trasndermal patches.

Compared to placebo group, favourable results were noted in non-opioid transdermal patches, including opioid consumption, active knee flexion, inpatient stay and episodes of breakthrough pain in spite of insignificant statistical difference. High satisfaction without any complication were noted. Besides, non-opioid transdermal patches are also cost effective. There were only a few literature discussing about non-opioid patches in patients with total knee arthroplasty. The results showed indifferent pain improvement and no significant additional pain relief. Our results were compatible with current related studies, which showed no significant improvement. This is the first study to compare the analgesic efficacy of different non-opioid tansdermal patches in a prospective randomised trial.

Infection is a potentially disastrous complication of total knee arthroplasty (TKA). Although advances in surgical technique and antibiotic prophylaxis have reduced the incidence of infection to approximately 1% in primary TKA, there is still a substantial number of patients. Treatment options include antibiotic suppression, irrigation and debridement with component retention (with or without polyethylene exchange), one-stage or two-stage revision, resection arthroplasty and rarely arthrodesis or amputation. Salvage of prostheses has always been associated with low rates of success. It was reported a success rate of 27% for open debridement. It is suitable for selective cases where infection occurs within the first 4–6 weeks of primary TKA or in the setting of acute hematogenous gram positive infection with stable implants. With the advances in arthroscopic technique, arthroscopy after TKA has become an accepted method to assess and manage the complications of TKA. Arthroscopic treatment for infected TKA was reported and the successful rate was similar or better than open debridement in selected situations. We used arthroscopic debridement combined with continuous antibiotic irrigation and suction to treat acute presentation of infected TKA with acceptable result. From 2010∼2013, we has performed arthroscopic debridement and continuous antibiotic irrigation system for seven patients with infected TKA. All of the seven patients had no open wounds nor sinuses and no radiological evidence of prosthetic instability or evidence of osteomyelitis. Most of the surgical intervention was performed within two weeks from the onset of symptoms. Arthroscopic debridement was performed with a shaver using a multiportal technique (anterolateral, anteromedial, superolateral, superomedial, posterolateral, posteromedial) and a continuous antibiotic irrigation system was used to dilutes concentration of the causative microorganism and keep high local bactericidal concentration of antibiotics. We evaluated the efficacy by using follow up of the C-reactve protein (CRP) test, erythrocyte sedimentation rate (ESR) test and physical examination. Successful treatment was defined as prosthesis retention without recurrent infection by the final follow-up. Six of seven infected TKA were cured without recurrence at a mean follow-up of 23 months (range, 6–41 months). One case with rheumatoid arthritis under long-term steroid therapy had recurred after episode of upper respiratory tract infection for 3 times. However, the infection was controlled by arthroscopic debridement and retention of the prosthesis was achieved. We emphasize the importance of posterior portal to ensure adequate arthroscopic debridement. It is imperative to make early diagnosis and treatment for infected TKA. We should make more effort to preserve the prosthesis in acute infection(within 2 weeks). With the advantage of minimal morbidity, arthroscopic treatement shoulder be an alternative to open debridement.

TKR is a standard procedure for knee joint falure. Besides surgical technique, the main concerns at the perioperative care are: infection prophylaxis, blood loss management, & pain control. Pain is a normal part during the post-operative recovery stage.

Currently, I apply multimodal pain control cocktails: Parenteral narcotics (as pethidine, tramadol, morphine), oral analgesics (as NSAIDs, Acetaminophen, opioids), PCA (Patient controlled analgesia), LIA (local IA injection anesthetics, Marcaine), and immediate Ice Packing.

How about the usage of transdermal, non-opioid devices as Lidocaine patch. It shows the advantages of: less invasiveness, less ambulation-impeding, easy monitor & control, patient-activated, and absence of opioid-induced complications. Also it can be an adjuvant in the multi-modal anesthesia.

In this Randomized prospective study, we investigate the analgesic effects of various transdermal non-opioid patches in patients after elective TKR

Introduction

Total knee arthroplasty [TKA] is a common procedure to relieve painful disability from advanced knee arthritis. However, related blood loss, ranging from 800 to 1200 ml, increase risk and disruption of recovery in anemic patients following TKA. Various methods for blood conservation had been proposed and examined. In the literature, the intra-articular administration of a solution mixing bupivacaine and epinephrine was commonly used after knee surgeries. Therefore, we conducted a retrospective, case controlled review of our primary TKAs to determine the hemostatic efficacy of this regimen following TKAs.

Cannulated screw is commonly used in the fixation of proximal femoral neck fractures. In the literature, several configurations had been proposed for best mechanical support with clinical experiences or biomechanical tests. Although screws in triangle configuration contribute certain fixation stability, but sometimes the surgeons made their own choices have to conduct another fixation pattern for some factors such as fracture type, economic issues, and so on. Therefore the aim of this study is to analyze the mechanical responses of a fractured femur fixed with screws in different configurations, screw materials and screw diameters with finite element method, trying to find the most stable construct.

A solid femur model was built from the CT images of a standard saw bone. Three fracture types of the femoral neck were created according to Pauwel's classification (30?, 50?, 70?) by CAD software. The models of implanted screws were built according to a commercial cannulated screw (Stryker Osteosynthesis, Schoenkirchen/Kiel, Germany) with diameter 6.5mm and 4.5mm by CAD software, too. Three fixation configurations were analyzed in this study, including triangle with superior single screw with titanium diameter 6.5mm, triangle with inferior single screw with diameter 6.5mm and diamond with four stainless screw diameter 4.5mm (fig.1). Totally there were nine models constructed in this study, and all of them were then imported into ANSYS WORKBENCH v14 (Swanson Analysis, Houston, PA, USA) to mesh and further analysis. 700N vertical downward force was applied on the femur head and the distal end of femur shaft was totally fixed.

The triangle fixation with superior single screw resulted in a best stability, but the fracture fixed with screws in a diamond configuration has least fracture gap. The difference of the maximum displacement of the femur head with Pauwel's classification 70?between triangle fixation with superior single screw and diamond configuration is only 0.03mm (1.72–1.69 mm). In most unstable femoral neck fracture [Pauwel's classification 70], the maximum gap distance is 0.59mm under the diamond configuration, while it is 0.63mm as the fracture fixed with a triangle configuration.

Therefore, this study suggests that four 4.5mm stainless screws in a diamond configuration is an alternative for proximal femur fracture once 6.5mm titanium screws are not available.

Introduction

Persistent problems and relatively high complication rates with reverse total shoulder arthroplasty (RTSA) are reported (1, 2). It is assumed that some of these complications are affected by improper intraoperative soft tissue tension. Achieving proper intraoperative soft tissue tension is an obvious surgical goal. However, intraoperative soft tissue tension measurements and methods for RTSA have not been reported. One way to quantify soft tissue tension is to measure intraoperative joint forces using an instrumented prosthesis. Hence, we have developed an instrumented RTSA to measure shoulder joint forces intraoperatively. The goal of this study was to measure intraoperative shoulder joint forces during RTSA.