Advertisement for orthosearch.org.uk
Results 1 - 3 of 3
Results per page:
Applied filters
Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 90-B, Issue SUPP_I | Pages 126 - 126
1 Mar 2008
Austman R Dunning C King G Dunham C Gordon K
Full Access

Purpose: To develop an experimental testing method to measure bone strains as a function of multiple implant stem designs in a single specimen, and to show the efficacy of this method with an application in the distal ulna.

Methods: Twenty-four strain gauges were applied to the surface of an isolated cadaveric ulna to measure anterior-posterior (AP) and medial-lateral (ML) bending loads at six locations along its length. The bone was potted in a custom-designed jig and positioned in a materials testing machine. Loads (5-25N) were applied to the ulnar head while strains were recorded. The ulnar head was removed and an 8cm threaded rod (diameter=5.8mm) was cemented into the canal, and subsequently removed after cement curing. This established a threaded cement mantle that would accept various threaded stem designs. To show the efficacy of this technique, testing was repeated with 5 and 7cm stems. The entire canal was then filled with cement and testing repeated to determine the effect of the residual cement void.

Results: All 24 strain gauges provided quality signals throughout the testing period. Strain varied linearly with load (R-squared=0.94–0.99). The initial threaded rod was easily removed, and there was no difficulty in placing subsequent stems within the mantle. Comparing the 5 and 7cm stems, little difference in strains was observed for the most proximal gauges (2%), with higher variations in the stem exit regions (17%). The cement-filled canal exhibited distal strains similar to the intact baselines (average 2% difference at 25N).

Conclusions: A reliable method has been developed that allows multiple stems to be tested in a single bone. Observed strain differences are therefore a function of implant parameters only (such as stem length), and are not influenced by differences in bone properties as occurs when testing multiple specimens. The layer of threaded bone cement did not impact the native bone strains. This experimental method will be useful to compare stem designs in a variety of bones, avoiding the need for large numbers of specimens due to the repeated measure experimental protocol.


Orthopaedic Proceedings
Vol. 90-B, Issue SUPP_I | Pages 131 - 132
1 Mar 2008
Dunham C Austman R King G Johnson J Dunning C
Full Access

Purpose: Anterior flanges have been added to the humeral components of some total elbow arthroplasty systems. Surgeons have the option of placing a wedge of bone or bone cement between the anterior surface of the humerus and the flange in an effort to improve implant stability and load transfer. The purpose of this study was to quantify the cortical strains in the humerus after arthroplasty for different materials placed behind the flange.

Methods: Five fresh-frozen cadaveric distal humeri were thawed and cleaned of all soft tissues. Strain gauges were applied to the anterior and posterior surfaces to record bending and axial strains. The bending gauges were positioned just proximal to the location of the flange tip. Cantilever bending and axial compression were applied using a materials testing machine. Following intact testing, the humeral component of a total elbow was implanted by an experienced surgeon and fixed using bone cement. Testing was repeated three times, each with a different material behind the flange: no graft (simulating a humeral component without an anterior flange), cancellous bone graft, and cement graft. Strains were normalized to the intact state and for the applied moments. Data were analyzed using repeated-measure ANOVAs (p< 0.05).

Results: For bending, the strain values were approximately 80% of the intact values with no graft material, 80% with the bone graft, and 87% with the cement graft. These differences among the graft materials were not significant (p=0.5). Similar results were found for the axial strains (p=0.3).

Conclusions: The intention of the anterior flange is to transfer a portion of the load carried by the implant stem to the distal humerus, thereby reducing stress-shielding and improving strength of the construct. In this investigation that employed bending and axial loads, the presence of an anterior flange had no significant effect on load transfer through the distal humerus regardless of graft material used. This would suggest that for the humeral component employed in this study, the flange might not be fulfilling its intended purpose.


Orthopaedic Proceedings
Vol. 90-B, Issue SUPP_I | Pages 98 - 98
1 Mar 2008
Dunham C Takaki S Johnson J Dunning C
Full Access

Three 3mm transverse slices were sectioned from the distal cancellous region of seven fresh-frozen cadaveric humerii. Each slice was marked with a 3x3mm grid, and subjected to compressive testing using a flat cylindrical indenter (1.6mm diameter). Indentation modulus and strength were calculated for each site, and pooled into nine anatomically-defined regions. The most distal slice had higher moduli values (p< 0.05), and the posterior capitellar region had lower moduli values (p< 0.05). There were no slice or regional differences in strength. This suggests that surgical procedures requiring cancellous fixation utilize the most distal aspect of the humerus while avoiding the posterior capitellum.

To quantify the indentation strength and modulus of distal humeral cancellous bone, and identify any regional variations.

Cancellous bone modulus in the distal humerus decreases from distal to proximal. The posterior capitellum has a lower modulus than the other regions of the distal humerus.

The influence of slice depth emphasizes the importance of minimizing the amount of bone removed during prosthetic replacement. Regional variations in modulus suggest that the posterior capitellum should be avoided during fixation of implants or placement of screws.

Three 3mm transverse cancellous bone slices obtained from the distal end of each of seven fresh-frozen cadaveric specimens were subjected to compressive testing using a materials testing machine with a 1.6mm flat cylindrical indenter. Testing was performed in a 3x3mm grid. The indentation modulus and local strength were calculated for each test site, and then averaged into nine regions defined by the capitellum, medial and lateral trochlea, and anterior, central and posterior sections for each slice. Mean modulus was found to be 309.8±242.0 MPa (range: 2.9–1041.7 MPa). Yield strength averaged 4.4±2.5 MPa (range: 0.6–16.3 MPa). The highest modulus was found in the distal-most slice (p< 0.05). The lowest modulus region was the posterior capitellum (p< 0.05). There were no differences in strength between slices or across the nine regions. A comparison with proximal tibial cancellous bone properties suggests the distal humerus may carry loads approaching 30% of those at the knee, assuming that bone adapts to stress magnitudes.

Funding: Natural Sciences and Engineering Research Council; University of Western Ontario