Despite numerous studies focusing on periprosthetic joint infections (PJIs), there are no robust data on the risk factors and timing of metachronous infections. Metachronous PJIs are PJIs that can arise in the same or other artificial joints after a period of time, in patients who have previously had PJI. Between January 2010 and December 2018, 661 patients with multiple joint prostheses in situ were treated for PJI at our institution. Of these, 73 patients (11%) developed a metachronous PJI (periprosthetic infection in patients who have previously had PJI in another joint, after a lag period) after a mean time interval of 49.5 months (SD 30.24; 7 to 82.9). To identify patient-related risk factors for a metachronous PJI, the following parameters were analyzed: sex; age; BMI; and pre-existing comorbidity. Metachronous infections were divided into three groups: Group 1, metachronous infections in ipsilateral joints; Group 2, metachronous infections of the contralateral lower limb; and Group 3, metachronous infections of the lower and upper limb.Aims
Methods
Prosthetic joint infection (PJI) remains one of the most challenging complications to manage following total joint arthroplasty (TJA). There is a paucity of published data on the management of PJI in smaller, rural hospital settings. In this study, we investigate [1] the success rate of surgical management for PJI following TJA and [2] the microbiology of infecting organisms in this unique geographical environment. We performed a retrospective single-centre study at a rural hospital (Southland Hospital, Invercargill, New Zealand) over a 3-year period (2019 to 2022). All patients presenting with a first episode of PJI fulfilling Musculoskeletal Infection Society criteria after hip or knee arthroplasty were included. All patients had a minimum follow up of 6 months. Treatment success was defined eradication of infection. Twenty-one cases (14 hips and 7 knees) were identified. These were managed with Debridement, antibiotics, and implant retention (DAIR) procedure (n=14, 67%), single-stage revision (n=6, 29%), or long-term suppressive antibiotics (n=1, 4%). Of the DAIR patients, infection recurred in 50% and underwent subsequent revision. Of the single-stage revision patients, 17% failed and underwent subsequent revision. The overall success rate was 90%. Methicillin-sensitive Staphylococcus aureus (MSSA) was the most isolated pathogen (57%,) with no methicillin-resistance Staphylococcus aureus (MRSA) identified. Overall, 90% of infecting organisms were cefazolin sensitive. These results suggest that management of PJI is a safe and viable treatment option when performed in a rural hospital setting, with comparable treatment success rates to urban centres. The incidence of MRSA is low in this setting. Rates of antibiotic resistance were relatively low and most organisms were sensitive to cefazolin, the routine antibiotic used in prophylaxis.
It is unclear if the prevalence of resistance organisms causing (PJI) in total hip/knee arthroplasty is different among North/South American and European countries. Therefore, we sought to compare causative organisms, rates of resistant organisms, and polymicrobial infections in hospitals in North/South America, and Europe. We performed a retrospective study of 654 periprosthetic hip (n=361) and knee (n=293) infections (January 2006-October 2019) identified at two facilities in the United States (US) (n=159), and single institutions located in Argentina (n=99), Uruguay (n=130), United Kingdom (UK) (n=103), Germany (n=59), and Russia (n=104). The analyses were performed for the entire cohort, knees, and hips. Alpha was set at 0.05.Aim
Method
Modular dual-mobility (MDM) constructs are used to reduce dislocation rates after total hip replacement (THR). They combine the advantages of dual mobility with the option of supplementary acetabular screw fixation in complex revision surgery. However, there are concerns about adverse reaction to metal debris (ARMD) as a result of fretting corrosion between the metal liner and shell. Methods: The aim of this systematic review was to find and review all relevant studies to establish the outcomes and risks associated with MDM hip replacement. All articles on MDM THRs in the Medline, EMBASE, CINAHL, Cochrane Library, and Prospero databases were searched. A total of 14 articles were included. A random intercept logistic regression model was used for meta-analysis, giving estimated average values. Results: There were 6 cases of ARMD out of 1312 total. Estimated median incidence of ARMD from meta-analysis was 0.3% (95% CI 0.1 – 1.4%). Mean postoperative serum Cobalt was 0.81 μg/L (95% CI 0.33 – 1.29 μg/L), and Chromium was 0.77 μg/L (95% 0.35 – 1.19 μg/L), from 279 cases in 7 studies. Estimated median incidence of a serum cobalt or chromium ion measurement ≥1 μg/L was 7.9% (95% CI 3.5 – 16.8%), and ≥7 μg/L was 1.8% (95% CI 0.7 – 4.2%). Conclusions: ARMD is a rare but significant complication following total hip replacement using a MDM construct. Its incidence appears higher than that reported in non-metal-on-metal (MoM) hip replacements but lower than that of MoM hip replacements. MDM hip replacements are associated with raised serum metal ion levels postoperatively, but there was no correlation with worse clinical hip function within studies. Studies were poor quality and at high risk of confounding. Pending further work, MDM constructs should be used with caution, reserved for select cases at particularly high risk of dislocation.Objectives
Antibiotic-eluting calcium compounds can be used to deliver antibiotics in the management of prosthetic joint infection (PJI). Described omplications include wound drainage, heterotopic ossification(HO) as well as hypercalcaemia which is potentially life threatening. The aim of this study is to assess the incidence of hypercalcaemia and other complications between two calcium based antibiotic delivery systems. A retrospective study was performed. Thirty two patients treated with Stimulan or Cerament Calcium based antibiotic delivery system between August 2014 to January 2017 were included. Seven patients received Cerament, 21 cases received Stimulan and one patient received both. The volume used as well as pre- and post-operative serum calcium were recorded as well as any wound related complications and radiologic changes suggestive of heterotopic ossification. The postoperative serum adjusted Calcium were taken weekly during the initial post operative period. Patients with overactive parathyroid disease and pre-existing renal disease were excluded.Aim
Method
Revision surgery and debridement and implant retention are recognised approaches for managing prosthetic joint infections (PJI) but may not always be indicated. If the patient is unable to have or declines surgery, prolonged suppressive antibiotic therapy (PSAT) is an option. This study aims to define outcomes of PSAT from a single unit. A retrospective study was performed. All cases of PJI involving the hip or knee between 2012 and 2017 were identified from our institutional database and cross referenced with patient notes. One hundred and seventy eight cases were identified. Of these, 23 (12.9%) (10 hips, 13 knees) were treated with PSAT. Infection was diagnosed based on the MSIS criteria in all cases and all cases were managed by a multidisciplinary team which included specialist microbiologists. One case of long term antifungal therapy was additionally identified. Co-morbidity was assessed using the Charlson co-morbidity index. Exacerbations of infection and need for further surgery were recorded.Aim
Method
Fractures around total knee arthroplasties pose
a significant surgical challenge. Most can be managed with osteosynthesis
and salvage of the replacement. The techniques of fixation of these
fractures and revision surgery have evolved and so has the assessment
of outcome. This specialty update summarises the current evidence
for the classification, methods of fixation, revision surgery and
outcomes of the management of periprosthetic fractures associated
with total knee arthroplasty. Cite this article:
Revision of well cemented femoral components in revision THA can be technically challenging and time consuming. The cement in cement (CiC) technique addresses these issues. Results of femoral components which have undergone multiple CiC revisions have not previously been reported. We present the clinical and radiological results of femoral components which have undergone multiple CiC revisions with a minimum follow up of 5 years.Introduction
Objective
Reoperation within thirty days after hip fracture surgery is associated with increased mortality, length of stay and cost of care. The United Kingdom National Hip Fracture Database (NHFD) reported a significant increase in the 30-day reoperation rate for patients undergoing surgery for hip fractures in our unit from 2012 to 2014. We audited our data in order to validate this and identify any reversible trends. Between January 2012 and December 2014, 1757 consecutive procedures for hip fracture were performed in our unit. Patients who had a reoperation within 30 days and those recorded as ‘unknown’ under the reoperation category were identified. Patients with hip dislocations were included. Patient demographics, diagnosis, treatment and outcomes were recorded. This was compared with reoperation for all causes after 30 days over a 12-month period.Introduction
Methods
We present the extended follow-up (≥ 20 years)
of a series of fully hydroxyapatite-coated femoral components used in
72 primary total hip replacements (THRs). Earlier results of this
cohort have been previously published. All procedures were performed
between 1986 and 1991. The series involved 45 women and 15 men with
12 bilateral procedures. Their mean age at the time of surgery was
60 years (46 to 80) and the mean duration of follow-up was 22.5
years (20 to 25). At final follow-up, the mean Merle d’Aubigné and
Postel hip scores were 5.5 (4.5 to 6), 3.8 (3.5 to 5) and 3.3 (3.0
to 5.0) for pain, mobility and function, respectively. Of the patients
92% were very satisfied at the time of final follow-up. There were seven revisions: six of the acetabular component for
aseptic loosening and one of both the stem and the acetabular component
for loosening due to deep infection. The survival of this prosthesis
at 22.5 years with revision for any reason as the endpoint was 91.7%
(95% confidence interval (CI) 84 to 99). Survival with aseptic loosening
of the stem as the endpoint was 100% (95% CI 90 to 100). This prosthesis provides pain relief in the long term. Survival
of this component is comparable to the best results for primary
THR with any means of fixation. Cite this article:
The ideal method of fixation for femoral components in total hip arthroplasty (THA) is unknown. While good results have been reported for cemented and uncemented components, there is relatively little published prospective data with twenty years or more of follow up. Results of the Furlong femoral component have been presented at an average of 17 years follow up. We have extended this follow up period to an average of 22.5 years with a minimum of 22 years and a maximum of 25 years. This study included all patients treated using the Furlong femoral component between 1986 and 1991. Patients were reviewed preoperatively and then at 6, 12, 26 and 52 weeks post operatively and annually thereafter. They were assessed clinically and radiographically and the Merle d'Aubigne Postel hip score was calculated at each visit. A Visual Analog Score (VAS) was also recorded to assess patient satisfaction with their procedure. A Kaplan Meier survival analysis was performed.Introduction
Methods
Optimal results from uncemented total hip arthroplasty (THA) requires the prosthesis to obtain initial stability, restoration of biomechanics, bone contact along the ingrowth surface and uniform stress transfer to the proximal femur. Anatomic variation within the population makes this difficult to reproduce in every patient. To achieve optimal fit and fill of the proximal femur, options are reshaping the canal or creating an implant which precisely fits the patient's anatomy. The former increases bone loss and risks weakening the supporting bone, creating areas of stress concentration or shielding. Computer assisted design-computer assisted manufacture (CAD-CAM) femoral components were designed to overcome these issues. We present the long term results of CAD-CAM femoral components used in primary THA. This was a prospective study looking at a consecutive, single surgeon series of THA's. Patients were reviewed pre operatively then at 6 weeks, 3 and 12 months post operatively and then yearly. Clinical as well as radiological review was performed at each visit and Harris Hip Score (HHS), Oxford Hip Score (OHS) and Western Ontario McMaster's (WOMAC) scores were calculated. Kaplan-Meier survival analysis was performed.Introduction
Methods
The variability of the endosteal geometry after removal of the femoral component can make proximal fit difficult to achieve with an ‘off the shelf’ prosthesis. Whatever the anatomy of the proximal femur, it is important to achieve immediate stability, preserve bone stock and protect the femur from cortical defects which can lead to subsequent fracture. In revision Total Hip Arthroplasty (THA) this requires a large inventory of modular components. The use of custom computer-assisted design-computer-assisted manufacture (CAD-CAM) components negates this need. Little has been published on the use of custom-made components in revision THA. We report the results of a cohort of patients who underwent revision THA using CAD-CAM femoral components. A prospective study was performed between 1991 and 1998. A consecutive series of patients who had revision THA using custom components were assessed clinically and radiologically. The design of the femoral components was governed by the existing femoral bone stock. Patients were reviewed pre operatively then at 6 weeks, 3months and 12 months postoperatively and then annually. Radiographs were assessed at each visit and Oxford, Harris and WOMAC hip scores were calculatedIntroduction
Methods
Metal on metal hip resurfacing arthroplasty (MoM HR) has the highest revision rates according to the UK National Joint Registry. Revisions for lesions associated with soft tissue necrosis (pseudotumors) have been associated with poor outcomes. There is a relative paucity of information on early revision of painful HR prostheses. We present the results of a series of patients who underwent early revision of painful MoM HR procedures. This prospective study involved a consecutive series of patients undergoing revision of HR to THA. The diagnoses leading to revision are discussed. Clinical and radiological assessments were performed pre operatively as well as 6 weeks, 12 months postoperatively and yearly thereafter. Pre and post operative Harris Hip Score, Oxford Hip Score and WOMAC scores were calculated. Patient satisfaction was assessed using a visual analogue scale.Introduction
Methods
There is no consensus on the ideal management of young, active patients with disabling coxarthrosis. Within this group, patients with femoral head defects secondary to cysts or avascular necrosis pose particular challenges. Resurfacing arthroplasty is contraindicated and the results of traditional total hip arthroplasty are suboptimal in this group. The BMHR was designed to offer a bone conserving option for these patients. We report the outcome of this device in the short term. This prospective study examines the clinical and radiological outcome of a consecutive series of patients treated with the BMHR arthroplasty. All patients had femoral head defects and disabling hip pain. Patients were reviewed pre operatively and then at 6 weeks, 12 weeks, and 1year post operatively and then yearly. Oxford, Harris and WOMAC hip scores were calculated at each review. Radiological assessment was also performed at each follow up.Introduction
Methods
We present the 10- to 17-year results of 112 computer-assisted design computer-assisted manufacture femoral components. The total hip replacements were performed between 1992 and 1998 in 111 patients, comprising 53 men and 58 women. Their mean age was 46.2 years (24.6 to 62.2) with a mean follow-up of 13 years (10 to 17). The mean Harris Hip Score improved from 42.4 (7 to 99) to 90.3 (38 to 100), the mean Oxford Hip Score from 43.1 (12 to 59) to 18.2 (12 to 51) and the mean Western Ontario MacMasters University Osteoarthritis Index score from 57.0 (7 to 96) to 11.9 (0 to 85). There was one revision due to failure of the acetabular component but no failures of the femoral component. There were no revisions for aseptic loosening. The worst-case survival in this cohort of custom femoral components at 13.2 years follow-up was 98.2% (95% confidence interval 95 to 99). Overall survival of this series of total hip replacements was 97.3% (95% confidence interval 95 to 99). These results are comparable with the best medium- to long-term results for femoral components used in primary total hip replacement with any means of fixation.
Pre operative oxford, Harris and WOMAC scores in the THA group were 41.1, 46.4 and 50.9 respectively while the post operative scores were 14.8, 95.8 and 5.0. In the HR group, pre- operative scores were 37.0, 54.1 and 45.9 respectively compared to 15.0, 96.8 and 6.1 post operatively. The degree of improvement was similar in both groups.
There were 6 complications (3.8%) in this series; a periprosthetic fracture of the femoral diaphysis (1), posterior dislocation (2), failure secondary to aseptic loosening of the implant (1) and deep vein thromboses (2)
A novel adaptor was designed to correct for the differential radii and enable removal of the well fixed BHR socket with the explant. We present the results of our initial experience with this device.
The explant cup extractor was used with its standard centering head and curved blades. The size of the explanted cup, last reamer size and size of the implanted component were recorded
