The proximity of neural structures to the coracoclavicular ligaments limits the amount of coracoid process that can be harvested. The purpose of this study of 100 dry human scapulae was to define the anatomic limitations.

We found the mean measurement of the horizontal arm of the coracoid process anterior to the conoid tubercle was 21.5 mm (SD 0.9 mm). In 10% of the scapulae, it was larger than 30 mm. In 66%, the posterior aspect of the conoid fused with the vertical ramus and the lateral lip of the suprascapular notch.

This amount of coracoid appears to be large enough to expand the glenoid vault, and to hold two AO small fragment screws. It can be safely harvested if the conoid ligament is respected. Partial sacrifice of the trapezoid ligament is unavoidable, but does not compromise coracoclavicular stability. If the coracoid osteotomy is extended medial to the conoid tubercle it encroaches on the vertical ramus of the coracoid and can damage the suprascapular nerve. Posterior advancement of the osteotomy can extend onto the anterosuperior glenoid.

We evaluated the clinical outcome of arthroscopic labroplasty in 56 patients treated for shoulder instability owing to ligamentous laxity.

In our technique, the antero-inferior labral capsular complex is detached and mobilised from the glenoid. It is advanced superiorly and plicated to create a new labrum, retensioning the capsule and decreasing the articular volume. Usually, a rotator interval plication is also added. Postoperatively, patients wear an adduction sling for three weeks, but movement is permitted within pain limits.

The mean time to follow-up, when patients were clinically reviewed and assessed on the Walch-Du Play score, was 26 months (12 to 74). No intra-operative complications or nerve injuries were encountered. There was a single failure with frank redislocation. The mean Walch-Du Play score was 88/100 (10 to 100).

Redundant capsule and a hypoplastic labrum are common in unstable shoulders owing to ligamentous laxity. The labroplasty creates a ‘bumper’ and addresses the excess of capsule. In our short-term experience, this arthroscopic technique is superior to the open capsular shift.

Between 1996 and 2001 we used a modification of the Latarjet procedure to treat 70 patients with bony insufficiency of the glenoid. Our modification involves detaching a long piece of coracoid and rotating it to match its concave inferior surface with the surface of the glenoid. The coracoid graft is placed extra-articularly and the capsule repaired with bone anchors to the edge of the glenoid.

Postoperatively no sling is applied and rehabilitation is started early.

At a mean of 24 months (9 to 72) patients were clinically reviewed and assessed on the Walch-Du Play score. The results were excellent in 68%, moderate in 6% and poor in 1%. There were no redislocations.

The results were most satisfactory in this group of patients, most of whom participated in contact sports, where soft tissue procedures (e.g., open and arthroscopic Bankarts) carry unacceptable failure rates.

The capsular shift procedure is done to treat instability due to ligamentous laxity. Usually there is no traumatic avulsion of the labroligamentous tissues.

In surgical repair the anterior labrum is separated from the glenoid. The labrum and attached ligaments are shifted superiorly and attached with bone anchors to the decorticated glenoid. The labrum and ligaments are rolled into a soft tissue ‘bumper’ (we refer to this as labroplasty). Arthroscopic rotator interval plication is added to the procedure.

For six months to six years we followed up 67 patients treated between 1994 and 2000. There were two cases of recurrent subluxation (3%). Patient satisfaction was high.

The acromion is a bony process that juts out from the lateral end of the scapular spine. It is continuous with the blade and the spinous process. The process is rectangular, and carries a facet for the clavicle. Inferiorly is sited the subacromial bursa. Inferior encroachment or displacement of the acromion can result in impingement.

The aim of this osteological study was to assess the presence of acromial displacement and variations predisposing to compaction of the subacromial space. Using the method described by Morrison and Bigliana, we assessed the scapulae of 128 men and women ranging from 35 to 92 years of age. We found a flat acromion in 30%, no hook in 48%, a small hook in 18% and a large hook in 4%. The presence of a hook was associated with a subacromial facet and a large hook with glenoid erosion.

This study confirms the presence of four types of acromion.

We discuss aspects of glenohumeral instability and rotator cuff tears in a clinically orientated approach, presenting a new way of quantifying structural bone loss from the anterior glenoid and defining the Glenoid Index as an indicator of the appropriate surgical approach to address anterior instability.

Repair of the rotator cuff depends on viable and functional muscular tissue. We discuss the potential for repair of the supraspinatus tendon in relation to the tangent sign, fat infiltration and retraction. Comparing MRI and arthroscopic findings, we highlight pitfalls in the diagnosis and repair of the subscapularis tendon.

Painful conditions of the acromioclavicular (AC) joint are common in South Africa, particularly among sportsmen. These conditions are often treated by open excision of the distal end of the clavicle, but an arthroscopic procedure offers many advantages.

From February 1994 to February 2000, we performed 138 procedures. The mean age of patients ({71% men and 29% women) was 29 years (19 to 53). In cases of rotator cuff impingement, arthroscopic acromioplasty was followed by clavicular excision via the subacromial route. With a normal acromion and rotator cuff the AC joint was approached through two superior AC portals, avoiding removal of the AC ligaments. In all cases a standard 3.5-mm arthroscope was placed in one portal for viewing and the mechanical shaver inserted through the other. About 7 mm to 8mm of bone was removed from the clavicle. Patients were in hospital for about a day and 87% were discharged the same day.

The mean follow-up time was 34 months (2 months to 4 years). Patient satisfaction was high in 32%, fair in 60% and poor in 8%. Most patients (92%) returned to all previous sports and activities.

We concluded that the arthroscopic Mumford procedure is at least as successful as its open equivalent. It can be done as an outpatient procedure and permits a rapid return to activities. Cosmesis is excellent and stability of the AC joint is preserved.

The rotator cuff is sited on the anatomical neck of the humerus and is formed by the insertion of the supraspinatus (SP), infraspinatus (IS), teres minor (TM) and subscapularis. All play a vital role in the movement of the glenohumeral joint, and the anatomy is of critical importance in arthroscopic rotator cuff repair. We undertook an osteological and gross anatomical dissection study of the insertion mechanism of these tendons, in particular the SP .

The SP inserts by a triple or quadruple mechanism. The ‘heel’ (medial) and capsule fuse, inserting into the anatomical neck proximal to the anterior facet of the greater humeral tubercle. The ‘foot arch’ inserts as a strong, flat, fibrous tendon into the facet. This area is cuboidal, rectangular, or ellipsoid, and measures 36 mm² to 64 mm². In about 5%, the insertion is fleshy (pitted), rendering it weaker than a tendinous attachment. The ‘toe’ lips over the edge of the facet laterally and fuses with the periosteum, fibres of the inter-transverse ligament and the IS. A proximal ‘hood’ of about 4 mm stretches down inferiorly and fuses with the periosteum of the humeral shaft. The subacromial or subdeltoid synovial bursa are sited laterally.

The IS and TM insert into the middle and posterior facets (225 mm and 36 mm²) at respective angles of 80° and 115°. The inferior portion of the TM facet is not fused with the shoulder capsule. The subscapularis inserts broadly into the lesser tubercle, and the superior fibres fuse with the shoulder capsule and intertransverse ligament. The insertion of the subscapularis does not contribute directly to the formation of the ‘hood’, which belongs exclusively to the SP, IP and TM.

This study confirms the complexity of the SP insertion and suggests that an unfavourable attachment or biomechanical anatomical malalignment may lead to eventual tendon/cuff degeneration.

We have long suspected that patients treated at our institution have narrower femoral canals than the literature suggests. This has implications when it comes to nail size and the question of using reamed or unreamed nails. Using CT analysis, we studied the morphology of the femoral isthmus.

We prospectively evaluated 30 men with a mean age of 26 years (20 to 35). Patients with previous femoral fractures were excluded from the study. A scanogram determined the level of the isthmus and axial cuts at this level accurately revealed canal size and shape.

We found a canal size of less than 12 mm in 62%. In a third of these, canal size was less than 11 mm. Axial cuts showed three types of femoral canals: 14 patients had thick femoral cortices and a narrow canal, seven had thin cortices and a wider canal, and nine had an oval canal, with the larger diameter in the sagittal plane.

If one adheres to the principle of reaming until cortical clutter is heard, the recommended 12-mm or 13-mm reamed femoral nail is not suitable for the majority of non-Caucasian men in our population. Larger nails may cause such complications as delayed union, nonunion and fracture. Smaller nails of 10-mm and 11-mm diameter result in satisfactory clinical and radiological outcomes.

The supraspinatus tendon (SP) often ruptures. Gray established that the tendinous insertion always attaches to the highest facet of the greater tubercle of the humerus. Our osteological study of 124 shoulders in men and women between the ages of 35 and 94 years refocuses on the humeral insertion of the SP in relation to infraspinatus (IS) and teres minor (TM).

We found type-I SFs (cubic) in 53 shoulders (43%) and type-II SFs (rectangular or oblong) in 21 (17%). Type-III (ellipsoid) SFs were present in 20 shoulders (16%) and type-IV (angulated or sloping) in 11 (9%). SFs were type V (with tuberosity) in 12 shoulders (10%) and type VI (pitted) in three (2%). The facet area of the SP, IP and TM varied from 49 mm, 225 mm and 36mm2. Of the three muscles, the IS facet was consistently the largest (p < 0.05) and shaped rectangularly.

The SP inserted in a cubic or rectangular facet format in 75% of people. SP facet-size may relate to tendon strength, degeneration and rupture. This information may contribute to the understanding of tears of the rotator cuff.

Traumatic atlanto-axial subluxation is a rare injury which may not be revealed on routine radiographs, especially when there is muscle spasm. We report on seven patients with atlanto-axial subluxation as a result of neck injury; only two of them had significant head injuries. Three patients presented with a neurological deficit attributable to the injury, one immediate and two with delayed onset. Traumatic atlanto-axial instability, occurring in an otherwise healthy patient, has a potential for neurological disaster; early consideration of operative treatment is indicated.

Isolated traumatic dislocation of the radial head in children is not as rare as sometimes supposed. Attention to detail in radiographic interpretation is the key to diagnosis. Early closed reduction and immobilisation in an above-elbow plaster in 90 degrees of flexion and full supination for three to six weeks is recommended. Seven cases are presented, two of which were treated operatively and had unsatisfactory results. The applied anatomy, management and complications are discussed.