header advert
Results 41 - 60 of 62
Results per page:
Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_16 | Pages 53 - 53
1 Dec 2015
Tan T Manrique J Gomez M Chen A Parvizi J
Full Access

It is strongly recommended that tissue and synovial fluid culture samples be obtained during reimplantation performed as part of a two-stage exchange arthroplasty. The incidence of positive cultures during reimplantation and the influence of positive cultures on subsequent outcome are unknown. This aim of this study was to determine the incidence of positive cultures during reimplantation and to investigate the association between positive cultures at reimplantation and the subsequent outcome

A retrospective review was conducted on 267 patients that met the Musculoskeletal Infection Society (MSIS) criteria for PJI that completed both stages of two-stage exchange arthroplasty (Table 1). Intraoperative culture results from tissue and/or synovial fluid were obtained. Cultures were positive in 33 cases (12.4%) undergoing reimplantation surgery (Figure 1). Treatment failure was assessed based on the Delphi consensus definition. Logistic regression analysis was performed to assess the predictors of positive culture and risk factors for failure of two-stage exchange arthroplasty.

Treatment failure was 45.5% for those with a positive intraoperative culture and 20.9% in those with negative cultures at the time of reimplantation. When controlling for organism virulence, comorbidities, and other confounding factors, treatment failure was higher (odds ratio [OR]: 3.3; 95% confidence interval [CI]: 1.3–4.5) and occurred at an earlier time point (hazard ratio: 2.5; 95% CI: 1.3–4.5) in patients with a positive reimplantation culture. The treatment failure rate was not different between cases with two or more positive cultures (36.4%) and one positive culture (42.8%).

Positive intraoperative cultures during reimplantation, regardless of the number of positive samples were independently associated with two times the risk of subsequent infection and earlier treatment failure. Surgeons should be aware that a positive culture at the time of reimplantation independently increases the risk of subsequent failure and needs to be taken seriously. Given the significance of these findings, future studies are needed to evaluate the optimal management of positive cultures during reimplantation surgery.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_16 | Pages 58 - 58
1 Dec 2015
Tan T Maltenfort M Chen A Shahi A Madden A Parvizi J
Full Access

Considerable efforts have been invested into identifying risk factors for periprosthetic joint infection (PJI) after total joint arthroplasty (TJA). Preoperative identification of risk factors for developing PJI is imperative for medical optimization and targeted prophylaxis. The purpose of this study was to create a preoperative risk calculator for PJI by assessing a patient's individual risks for developing PJI with resistant organisms and S.aureus.

A retrospective review of 27117 patients (43253 TJAs) from 1999 to 2014, including 1035 PJIs, was performed. A total of 41 risk factors including demographics, comorbidities (using the Elixhauser and Charlson Index), and the number of previous TJAs, were evaluated. Multivariate analysis was performed; coefficients of the models were scaled to produce useful integer scoring. Predictive model strength was assessed employing area under the curve (AUC) analysis.

Among the 41 assessed variables, the following were significant risk factors in descending order of significance: prior surgeries (p<0.0001), drug abuse (p=0.0003), revision surgery (p<0.0001), human immunodeficiency virus (p=0.0004), coagulopathy (p<0.0001), renal disease (p<0.0001), congestive heart-failure (p<0.0001), psychoses (p=0.0024), rheumatological disease (p<0.0001), knee involvement (p<0.0001), diabetes (p<0.0001), anemia (p<0.0001), males (p<0.0001), liver disease (p=0.0093), smoking (p=0.0268), and high BMI (p<0.0001). Furthermore, presence of heart-valve disease (p=0.0409), metastatic disease (p=0.0006), and pulmonary disease (p=0.0042) increased the resistant organism PJIs. Patients with metastatic disease were also more likely to be infected with S. aureus (p=0.0002). AUCs were 0.83 for any PJI, 0.86 for resistant PJI, and 0.84 for S.aureus PJI models.

This large-scale single-institutional study has determined various risk factors for PJI. Some factors are modifiable and need to be addressed before elective arthroplasty. It is imperative that surgeons are aware of these risk factors and implement all possible preventative measures, including targeted prophylaxis, in patients with high-risk of PJI. Continued efforts are needed to find novel and effective solutions to minimize the burden PJI.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_16 | Pages 59 - 59
1 Dec 2015
Tan T Springer B Parvizi J Chen A
Full Access

Perioperative antibiotic prophylaxis remains one of the most important strategies for prevention of periprosthetic joint infection (PJI) with current guideline recommending a first or second generation cephalosporin. Penicillin (PCN) allergy is often reported by patients, which often results in avoidance of administration of cephalosporins due to fear of cross-reactivity. Alternative medications, such as vancomyin, are often used despite reduced antimicrobial coverage. The purpose of this study was to determine if PCN allergic patients who received vancomycin alone prior to elective primary total joint arthroplasty were at increased risk of developing a subsequent PJI.

A retrospective review of 7,602 primary total joint arthroplasties (TJAs) performed between 2005 and 2013 in two institutions were identified using a prospective institutional database. Patient reported PCN or cephalosporin allergy was electronically queried from the anesthesia note. Patients who recieved multiple prophylactic antibiotics, or had unavailable perioperative antibiotic information, or those who received medication other than cefazolin and vancomycin were excluded. PJI was determined using a cross-match with an institutional PJI database constructed from International Classification of Diseases (ICD)-9 codes. Logistic regression analysis was then performed to evaluate the risk of subsequent PJI.

The rate of PJI was 1.4% (32/2296) in patients with a reported PCN allergy that received vancomycin alone versus 1.1% (59/5306) in non-PCN allergic patients that received cefazolin alone. The multivariate analysis, with the given sample size, did not detect a statistically significant increased risk of PJI when vancomycin was administered alone (adjusted odds ratio: 1.23, 95% CI 0.6–3.1, p=0.35). While there was no significant differences in the organism profile between PJIs in both groups, the rate of PJI caused by resistant organisms was higher in patients who received vancomycin alone (11.9%, 7/59) compared to those who received cefazolin (3.1%, 1/32).

While administration of perioperative prophylactic vancomycin alone during elective primary arthroplasty does not seem to result in a higher rate of subsequent PJI, patients who received vancomycin alone and developed a PJI were more likely to develop an infection with an antibiotic resistant organism. Future studies are needed to determine the most appropriate prophylactic antibiotic for patients who undergo elective arthroplasty and report PCN allergy.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_16 | Pages 56 - 56
1 Dec 2015
Shahi A Tan T Chen A Maltenfort M Parvizi J
Full Access

Periprosthetic joint infection (PJI) is one of the most devastating complications of total joint arthroplasty (TJA). Only a few studies have investigated PJI's impact on the most worrisome of all endpoints, mortality. The purpose of this study was to perform a large-scale study to determine the rates of PJI associated in-hospital mortality, and compare it to other surgical procedures.

The Nationwide Inpatient Sample was queried from 2002 to 2010 to assess the risk of mortality for patients undergoing revision for PJI or aseptic failures. Elixhauser comorbidity index and ICD-9 codes were used to obtain patients’ medical conditions and identify PJI. Multiple logistic-regression analyses were used to determine the associated variables with mortality. In-hospital mortality was compared to the followings: coronary-artery bypass graft, mastectomy, prostatectomy, appendectomy, kidney transplant, carotid surgery, cholecystectomy, and coronary interventional procedures.

PJI was associated with an increased risk (odds ratio 2.04) of in-hospital mortality (0.77%) compared to aseptic revisions (0.38%). The in-hospital mortality of revision THAs done for PJI (1.38%, 95%CI, 1.12–1.64%) was comparable to or higher than interventional coronary procedure (1.22%, 95%CI, 1.20–1.24%), cholecystectomy (1.13%, 95%CI, 1.11–1.15%), kidney transplantation (0.70%, 95%CI, 0.61%–0.79%) and carotid surgery (0.89%, 95%CI, 0.86%–0.93%) (Figure 1). The following comorbidities were independent risk factors for in-hospital mortality after TJA: liver disease, metastatic disease, fluid and electrolyte disorders, coagulopathy, weight loss and malnutrition, congestive heart failure, pulmonary circulation disorder, renal failure, and peripheral vascular disease.

PJI is associated with a two-fold increase in mortality and have mortality rates comparable to kidney transplantation and carotid surgery. Considering the fact that patients with PJI often require multiple surgical procedures, the rate of actual in-hospital mortality for patients with PJI may be considerably higher. Surgeons should be cognizant of the potentially fatal outcome of PJI and must emphasize the importance of infection control to reduce the risk of mortality.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_16 | Pages 55 - 55
1 Dec 2015
Gomez M Manrique J Tan T Chen A Parvizi J
Full Access

Failure of a two-stage exchange arthroplasty for management of periprosthetic joint infection (PJI) poses a major clinical challenge. There is a paucity of information regarding the outcome of further surgical intervention in these patients. Thus, we aim to report the clinical outcomes of subsequent surgical intervention following a failed prior two-stage exchange.

Our institutional database was used to identify 60 patients (42 knees and 18 hips) with a failed prior two-stage exchange from infection, who underwent further surgical intervention between 1998 and 2012 and had a minimum of two years follow-up. A retrospective review was performed to extract relevant clinical information, such as mortality, microbiology, and subsequent surgeries. Musculoskeletal Infection Society criteria were used to define PJI, and treatment success was defined using the Delphi criteria as previously reported.

Irrigation and debridement (I&D) was performed after a failed two-stage exchange in 61.7% (37/60) patients. The failure rate of I&D in this cohort was 51.3% (19/37). Two patients underwent amputation after I&D due to uncontrolled infection. A total of 40 patients underwent an intended a second two-stage exchange. Reimplantation occurred in only 65% of cases (26/40), and infection was controlled in 61.6% (16/26) of patients. An interim spacer exchange was required in 15% (6/40) of the cases. Of the 14 cases that did not undergo a second stage reimplantation, 5 required amputation, 6 had retained spacers, 1 underwent arthrodesis, and 2 patients died.

Further surgical intervention after a failed prior two-stage exchange has poor outcomes. I&D has a high failure rate and many of the patients who are deemed candidates for a second two-stage exchange either do not undergo reimplantation for various reasons or fail after reimplantation. The management of PJI clearly remains imperfect, and there is a dire need for further innovations that may improve the care of these PJI patients.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_1 | Pages 116 - 116
1 Feb 2015
Parvizi J
Full Access

Periprosthetic joint infection (PJI) is one the most devastating complications of joint arthroplasty. Although PJI is an infrequent complication (the reported incidence is 1%-2% in the United States), it is the most common indication for revision total knee arthroplasty in the Medicare population and the third most frequent indication for revision total hip arthroplasty. Moreover, the prevalence of PJI appears to be on the rise, with a projected number exceeding 60,000 to 70,000 cases in the United States by 2023.

It is estimated that more than 25% of revision procedures annually are attributed to PJI and this number is expected to increase in the upcoming years. The increase in the prevalence of obesity, diabetes, and other comorbidities among the patient population and the emergence of resistant infecting organisms are some of the reasons for the expected rise in the number of infections that medical community will witness.

The challenges that PJI presents to the orthopaedic community are on many fronts. Prevention of PJI has proven to be a difficult task indeed. Effective strategies for prevention of PJI are being refined. The Center for Disease Control will be publishing its updated Surgical Site Prevention Guidelines in the next few months that consists of specific recommendations for prevention of PJI. In recent years, strides are made in introducing novel molecular techniques for diagnosis of PJI, which may stand to change our practices. The current surgical technique for management of PJI, besides the immense cost, fall short of delivering high success to the patients. The major problem in eradication of infection relates to formation of biofilm, on the implant surface and internalization of the organisms by affected cells. Biofilm is a sophisticated structure comprising of organisms embedded in multiple layers of glycoccalyx that allows the organisms to evade host immunity and is impenetrable to antibiotics. These organisms are capable or communicating through molecular mechanisms such as quorum sensing that affords them advantage for survival in the host environment. In recent years strategies to prevent colonization of the implant surface, an essential first step in formation of biofilm, or biofilm disruption techniques have been introduced. A recent International Consensus meeting on PJI that assembled more than 350 experts identified some of the best practices in this field and identified areas in need of future research. Moving into the future, the field of orthopaedics in general and PJI in particular stand to benefit from the discoveries in the field of molecular diagnostics, metabolomics and epigenetics.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_1 | Pages 107 - 107
1 Feb 2015
Parvizi J
Full Access

Introduction:

The safety of simultaneous bilateral knee replacement (BTKA) remains controversial. Some studies have proposed a higher incidence of serious complications, even death, following BTKA whilst others refute the latter. The objective of this meta-analysis was to evaluate the safety of BTKA.

Methods:

A computerised literature search was conducted to identify all citations, between 1966 to 2005, concerning BTKA. All the English-language abstracts were obtained. A multistage assessment was then used to identify articles fulfilling the inclusion criteria for the study. All randomised, prospective studies reporting the outcome of BTKA were included. Details of any reported data were extracted and extensive analysis of relevant variables carried out.


Orthopaedic Proceedings
Vol. 96-B, Issue SUPP_12 | Pages 27 - 27
1 Jul 2014
Parvizi J
Full Access

Introduction

The safety of simultaneous bilateral knee replacement (BTKA) remains controversial. Some studies have proposed a higher incidence of serious complications, even death, following BTKA whilst others refute the latter. The objective of this meta-analysis was to evaluate the safety of BTKA.

Methods

A computerised literature search was conducted to identify all citations, between 1966 to 2005, concerning BTKA. All the English-language abstracts were obtained. A multistage assessment was then used to identify articles fulfilling the inclusion criteria for the study. All randomised, prospective studies reporting the outcome of BTKA were included. Details of any reported data were extracted and extensive analysis of relevant variables carried out.


Orthopaedic Proceedings
Vol. 96-B, Issue SUPP_8 | Pages 29 - 29
1 May 2014
Parvizi J
Full Access

Developmental dysplasia of the hip (DDH) is relatively a common condition that can lead to early arthritis of the hip. Although total hip arthroplasty is the surgical treatment of choice for these patients with end stage arthritis, some patients afflicted with DDH may present early. Acetabular osteotomy, in particular Bernese or periacetabular osteotomy (PAO as described by Professor Ganz and Jeff Mast back in 1980s) may be an option with patients with symptomatic DDH who have joint space available. PAO has many advantages. First, it is performed through a single incision (modified Smith Peterson approach) without breaching the abductor mechanism. The periacetabular fragment has, hence, excellent blood supply and avascular necrosis of the acetabular portion is not an issue. In addition, the osteotomy is so versatile allowing for great mobility of the fragment to obtain coverage even in the worst of circumstances. The osteotomy does not affect the posterior column and hence allows for earlier weight bearing. Most joint preservation surgeons in North America and Europe prefer PAO to other types of osteotomy.

The indications for PAO are a patient with symptomatic DDH who has good joint space and a congruent joint. The congruency of the joint is usually determined by the abduction views (obtained at 30 degrees abduction and neutral rotation). Although the joint space may be measured on plain radiographs, in recent years some centers have been utilising cross sectional imaging, such as dGEMERIC for evaluation of the articular cartilage, which has been shown to be a good predictor of outcome for PAO.


The Bone & Joint Journal
Vol. 96-B, Issue 5 | Pages 569 - 573
1 May 2014
Sullivan MP McHale KJ Parvizi J Mehta S

Nanotechnology is the study, production and controlled manipulation of materials with a grain size < 100 nm. At this level, the laws of classical mechanics fall away and those of quantum mechanics take over, resulting in unique behaviour of matter in terms of melting point, conductivity and reactivity. Additionally, and likely more significant, as grain size decreases, the ratio of surface area to volume drastically increases, allowing for greater interaction between implants and the surrounding cellular environment. This favourable increase in surface area plays an important role in mesenchymal cell differentiation and ultimately bone–implant interactions.

Basic science and translational research have revealed important potential applications for nanotechnology in orthopaedic surgery, particularly with regard to improving the interaction between implants and host bone. Nanophase materials more closely match the architecture of native trabecular bone, thereby greatly improving the osseo-integration of orthopaedic implants. Nanophase-coated prostheses can also reduce bacterial adhesion more than conventionally surfaced prostheses. Nanophase selenium has shown great promise when used for tumour reconstructions, as has nanophase silver in the management of traumatic wounds. Nanophase silver may significantly improve healing of peripheral nerve injuries, and nanophase gold has powerful anti-inflammatory effects on tendon inflammation.

Considerable advances must be made in our understanding of the potential health risks of production, implantation and wear patterns of nanophase devices before they are approved for clinical use. Their potential, however, is considerable, and is likely to benefit us all in the future.

Cite this article: Bone Joint J 2014; 96-B: 569–73.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 386 - 386
1 Dec 2013
Kurtz S Zielinska O MacDonald D Cates H Mont M Malkani AL Parvizi J Rimnac C
Full Access

Introduction:

First generation highly crosslinked polyethylenes (HXPLEs) have proven successful in lowering both penetration and osteolysis rates. However, 1st generation annealing and remelting thermal stabilization have been associated with in vivo oxidation or reduced mechanical properties. Thus, 2nd generation HXLPEs were developed to improve oxidative stability while still maintaining material properties. Little is known about the in vivo clinical failure modes of these 2nd generation HLXPEs.

The purpose of this study was to assess the revision reasons, wear, oxidative stability, and mechanical behavior of retrieved sequentially annealed Vitamin E diffused HXLPE in THA and TKA.

Methods:

251 2nd Generation HXLPE hip and knee components were consecutively retrieved during revision surgeries and continuously analyzed in a prospective, IRB approved, multicenter study. 123 acetabular liners (Implanted 1.2y; Range 0–5.0y) and 117 tibial inserts (Implanted 1.6y; Range 0–5.8y) were highly crosslinked and annealed in 3 sequential steps (X3). Five acetabular liners (Implanted 0.6y; Range 0–2.0y) and six tibial inserts (Implanted 1.3y; Range 0.5–1.8y) were diffused with Vitamin E (E1). Patient information was collected from medical records (Table 1).

Linear penetration of liners was measured using a calibrated digital micrometer (accuracy: 0.001 mm). Surface damage of tibial components was assessed using the Hood method. Thin sections were taken from the acetabular liners (along the superior/inferior axis) and the tibial components (along the medial condyle and central spine) for oxidation analysis and analyzed according to ASTM 2102. Mechanical behavior was assessed via the small punch test (ASTM 2183).


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 45 - 45
1 Dec 2013
Deirmengian C Kardos K Kilmartin P Cameron A Chung D Booth R Parvizi J
Full Access

INTRODUCTION:

The diagnosis of periprosthetic joint infection (PJI) remains a serious challenge. Based on previous work, we believe that biomarkers will become the mainstay of diagnosing PJI in the future. We report on completion of our 8 year comprehensive biomarker program, evaluating the diagnostic profile of the 15 most promising synovial fluid biomarkers.

METHODS:

Synovial fluid was prospectively collected from 99 patients being evaluated for infection in the setting of revision hip or knee arthroplasty. All synovial fluid samples were tested by immunoassay for 15 putative biomarkers that were developed and optimized specifically for use in synovial fluid. Sensitivity, specificity and receiver operating Characteristic (ROC) curve analysis were performed for all biomarkers.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 110 - 110
1 Dec 2013
MacDonald D Kurtz S Kocagoz S Hanzlik J Underwood R Gilbert J Lee G Mont M Kraay M Klein GR Parvizi J Rimnac C
Full Access

Background:

Previous studies regarding modular head-neck taper corrosion were largely based on cobalt chrome (CoCr) alloy femoral heads. Less is known about head-neck taper corrosion with ceramic femoral heads.

Questions/purposes:

We asked (1) whether ceramic heads resulted in less taper corrosion than CoCr heads; (2) what device and patient factors influence taper fretting corrosion; and (3) whether the mechanism of taper fretting corrosion in ceramic heads differs from that in CoCr heads.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 387 - 387
1 Dec 2013
Kurtz S MacDonald D Higgs G Gilbert J Klein GR Mont M Parvizi J Kraay M Rimnac C
Full Access

Introduction:

Degradation of modular head-neck tapers was raised as a concern in the 1990s (Gilbert 1993). The incidence of fretting and corrosion among modern, metal-on-polyethylene and ceramic-on-polyethylene THA systems with 36+ mm femoral heads remains poorly understood. Additionally, it is unknown whether metal debris from modular tapers could increase wear rates of highly crosslinked PE (HXLPE) liners.

The purpose of this study was to characterize the severity of fretting and corrosion at head-neck modular interfaces in retrieved conventional and HXLPE THA systems and its effect on penetration rates.

Patients & Methods:

386 CoCr alloy heads from 5 manufacturers were analyzed along with 166 stems (38 with ceramic femoral heads). Metal and ceramic components were cleaned and examined at the head taper and stem taper by two investigators. Scores ranging from 1 (mild) to 4 (severe) were assigned in accordance with the semi-quantitative method adapted from a previously published technique. Linear penetration of liners was measured using a calibrated digital micrometer (accuracy: 0.001 mm). Devices implanted less than 1 year were excluded from this analysis because in the short-term, creep dominates penetration of the head into the liner.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_22 | Pages 22 - 22
1 May 2013
Parvizi J
Full Access

Direct anterior approach (DAA) using the Hueter interval for total hip replacement (THA) provides an inter-nervous and inter-muscular access to the hip joint. Although it is technically demanding, the learning curve has been shown to be around 40 cases and 6 months in a high-volume joint surgeon's practice. A level-one study has demonstrated that DAA provides equal or better results and an equivalent rate of complications when compared to the highly utilized direct lateral approach. Using the available evidence to perform a multi-criteria decision analysis we demonstrated that DAA can be the most efficient approach to perform THA. From our standpoint, there is no reason to speculate a surgical approach with such advantages will be abandoned in the future. The DAA is here to stay, and may become the gold standard for THA.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_22 | Pages 102 - 102
1 May 2013
Parvizi J
Full Access

Total knee arthroplasty is an operation that can be performed with or without the use of tourniquet. Two systematic reviews and meta-analyses of the available literature have demonstrated that the use of tourniquet leads to a reduction in blood loss and also shortens the operative time. The opponents for use of tourniquet cite development of complications such as skin bruising, neurovascular injury, and metabolic disturbances as a deterrent for the use of tourniquet. Although the latter may be true for some patients such as those with previous vascular grafts, there is little evidence that routine use of tourniquet during TKA results in any of the above complications. The use of tourniquet on the other hand provides a bloodless field that allows the surgeon to perform the procedure with expediency and optimised visualisation. Blood conservation has gained extreme importance in recent years because of increased understanding of problems associated with blood transfusion such as increased surgical site infection (due to immunomodulation effect), increased length of hospital stay, increased cost and so on. Based on our understanding of the available evidence, we believe that routine use of tourniquet during TKA is justified and a good surgical practice.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_15 | Pages 280 - 280
1 Mar 2013
Nevelos J Boucher F Parvizi J Nessler JP Kolisek FR
Full Access

A novel cementless tapered wedge femoral hip implant has been designed at a reduced length and with a geometry optimized to better fit a wide array of bone types (Accolade II, Stryker, Mahwah, USA). In this study, finite element analysis (FEA) is used to compare the initial stability of the new proposed hip stem to predicate tapered wedge stem designs. A fit analysis was also conducted. The novel stem was compared to a predicate standard tapered stem and a shortened version of that same predicate stem.

Methods

The novel shortened tapered wedge stem geometry was designed based on a morphological study of 556 CT scans. We then selected 10 discrete femoral geometries of interest from the CT database, including champagne fluted and stove pipe femurs. The novel and the predicate stems were virtually implanted in the bones in ABAQUS CAE. A total of thirty FEA models were meshed with 4 nodes linear tetrahedral elements. Bone/implant interface properties was simulated with contact surface and a friction coefficient of 0.35. Initial stability of each stem/bone assembly was calculated using stair-climbing loading conditions. The overall initial stability of the HA coated surface was evaluated by comparing the mean rotational, vertical, gap-opening and total micromotion at the proximal bone/implant interface of the novel and predicate stem designs.

To characterize the fit of the stem designs we analyzed the ratio of a distal (60 mm below lesser trochanter) and a proximal (10 mm above lesser trochanter) cross section. A constant implantation height of 20 mm above the lesser trochanter was used. The fit of the stems was classified as Type 1 (proximal and distal engagement), Type 2 (proximal engagement only) and Type 3 (distal engagement only).

Results

The mean % micromotion of the HA coated surface greater than 50 mm was lowest at 40.2% (SD 11.5%) for the novel tapered wedge stem compared to the clinically successful predicate stem design (Accolade TMAZ, Stryker, Mahwah, USA) at 44.9% (SD 13.2%) and its shortened version at 48.5% (SD 9.0%) as shown in Figure 1. Improved initial stability of the new stem was also confirmed for rotational, vertical and gap-opening micromotion. However, there was no statistically significant difference.

The novel tapered stem design showed a well balanced proximal to distal ratio throughout the complete size range. The novel tapered stem design showed a reduced percentage of distal engagements (2.8%) compared to the predicate standard stem (17.2%). In the 40 to 60 year old male group the distal engagement for the standard stem increases (28.2%), whereas the distal engagements for the novel stem remains unchanged (1.3%).


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_15 | Pages 232 - 232
1 Mar 2013
Kurtz S MacDonald D Kocagoz S Tohfafarosh M Parvizi J Klein GR Lee G Marshall A Mont M Kraay M Stulberg B Rimnac C
Full Access

Introduction

Sequentially annealed highly crosslinked polyethylenes (HXLPEs) were introduced in total knee replacement (TKR) starting in 2005 to reduce wear and particle-induced osteolysis. Few studies have reported on the clinical performance of HXLPE knees. In this study, we hypothesized that due to the reduced free radicals, sequentially annealed HXLPE would have lower oxidation levels than gamma inert-sterilized controls.

Methods

145 tibial components were retrieved at consecutive revision surgeries at 7 different surgical centers. 74 components were identified as sequentially annealed HXLPE (X3, Stryker) while the remainder (n = 71) were conventional gamma inert sterilized polyethylene. The sterilization method was confirmed by tracing the lot numbers by the manufacturer. The conventional inserts were implanted for 1.7 years (Range: 0.0–9.3 years), while the X3 components were implanted 1.1 years (Range: 0.0–4.5 years). Surface damage was assessed using the Hood method. Oxidation analysis was performed in accordance with ASTM 2102 following submersion in boiling heptane for 6 hours to remove absorbed lipids. 30 of the conventional and 29 of the HXLPE inserts were available for oxidation analysis.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_15 | Pages 108 - 108
1 Mar 2013
Higgs G Kurtz S Hanzlik J MacDonald D Kane WM Day J Klein GR Parvizi J Mont M Kraay M Martell J Gilbert J Rimnac C
Full Access

Introduction

Wear debris generation in metal-on-metal (MOM) total hip arthroplasty (THA) has emerged as a compelling issue. In the UK, clinically significant fretting corrosion was reported at head-taper junctions of MOM hip prostheses from a single manufacturer (Langton 2011). This study characterizes the prevalence of fretting and corrosion at various modular interfaces in retrieved MOM THA systems used in the United States.

Methods and Materials

106 MOM bearing systems were collected between 2003 and 2012 in an NIH-supported, multi-institutional retrieval program. From this collection, 88 modular MOM THA devices were identified, yielding 76 heads and 31 stems (22 modular necks) of 7 different bearing designs (5 manufacturers) for analysis. 10 modular CoCr acetabular liners and 5 corresponding acetabular shells were also examined. Mean age at implantation was 58 years (range, 30–85 years) and implantation time averaged 2.2 ± 1.8 years (range, 0–11.0 years). The predominant revision reason was loosening (n=52). Explants were cleaned and scored at the head taper, stem taper, proximal and distal neck tapers (for modular necks), liner, and shell interfaces in accordance with the semi-quantitative method of Goldberg et al. (2002).


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_15 | Pages 107 - 107
1 Mar 2013
Kurtz S MacDonald D Parvizi J Klein GR Lee G Marshall A Mont M Kraay M Stulberg B Malkani AL Rimnac C
Full Access

Introduction

The purpose of this multicenter study was to assess the oxidative stability, mechanical behavior, wear and reasons for revision of 2nd generation sequentially annealed HXLPE, X3, and compare it to 1st generation XLPE, Crossfire. We hypothesized that X3 would exhibit similar wear rates but lower oxidation than Crossfire.

Methods

182 hip liners were consecutively retrieved during revision surgeries at 7 surgical centers and continuously analyzed over the past 12 years in a prospective, multicenter study. 90 were highly crosslinked and annealed (Crossfire; Implanted 4.2±3.4 years, max: 11 years), and 92 were highly crosslinked and annealed in 3 sequential steps (X3; Implanted 1.2±1.5 years; max: 5 years). Oxidation was characterized in accordance with ASTM 2102 using transmission FTIR performed on thin sections (∼200μm) from the superior/inferior axis. Mechanical behavior was assessed via the small punch test (ASTM 2183).