The October 2023 Hip & Pelvis Roundup³⁶⁰ looks at: Femoroacetabular impingement syndrome at ten years – how do athletes do?; Venous thromboembolism in patients following total joint replacement: are transfusions to blame?; What changes in pelvic sagittal tilt occur 20 years after total hip arthroplasty?; Can stratified care in hip arthroscopy predict successful and unsuccessful outcomes?; Hip replacement into your nineties; Can large language models help with follow-up?; The most taxing of revisions – proximal femoral replacement for periprosthetic joint infection – what’s the benefit of dual mobility?

The purpose was to determine the lifetime risk of re-operation due to specific complications related to dual mobility using re-operation as a competing risk, excluding loosening, periprosthetic fracture, and infection. 1503 mono-block dual mobility total hip arthroplasty (DM-THAs). Defining the re-operation when anesthesia (for dislocation) and revision when the implant changed. Surgery (801 for primary, 702 for revision with 201 for recurrent dislocation and 501 for loosening) performed between 1990 and 2020 in average 81-year-old (range 50–102) patients, with 522 living patients at 10 years follow-up. During the first month, outer dislocation (60 cases; 4%) was the cause re-operation (1% among primary and 6 % among revisions). Twenty-four intra-prosthetic dislocations (IPD) were an iatrogenic consequence of a failed closed reduction (reduction maneuver dissociating the inner head) with 1.6% revision. Between 1 month and 1 year, 22 new outer dislocations, while 25 of the 60 “first month” dislocations had recurrent dislocation. Fifteen other IPDs as iatrogenic consequences were observed. At one year, the cumulative revision was 3% (49 of 82 dislocations). Between 1- 10-year FU, 132 other dislocations, and 45 other revisions for dislocations were observed. Corrosion was another cause of revision (37 cases): between the cobalt-chromium shell and the femoral neck (23 hips), or 14 crevice corrosion between the trunnion and the metal head (trunnion damage). In summary, at 10-year: dislocation first cause of re-operation (214 anesthesia, 14%), while among 131 revisions (8.9 %) the 55 iatrogenic intra-prosthetic dislocations were the first revision cause before 39 recurrent dislocations and 37 corrosions. The 522 patients followed ten years or more had a 15% risk revision due to DM specific complications during their lifetime and 10% more risk associated with loosening (6%), periprosthetic fracture (2%) and infection (2%)

Aims

In the native hip, the hip capsular ligaments tighten at the limits of range of hip motion and may provide a passive stabilizing force to protect the hip against edge loading. In this study we quantified the stabilizing force vectors generated by capsular ligaments at extreme range of motion (ROM), and examined their ability to prevent edge loading.

Aims

Dual mobility (DM) implants have been shown to reduce the dislocation rate after total hip arthroplasty (THA), but there remain concerns about the use of cobalt chrome liners inserted into titanium shells. The aim of this study was to assess the clinical outcomes, metal ion levels, and periprosthetic femoral bone mineral density (BMD) at mid-term follow-up in young, active patients receiving a modular DM THA.

Aims. To evaluate the rate of dislocation following dual mobility total hip arthroplasty (DM-THA) in patients with displaced femoral neck fractures, and to compare rates of dislocation, surgical-site infection, reoperation, and one-year mortality between DM-THA and bipolar hemiarthroplasty (BHA). Methods. Studies were selected based on the following criteria: 1) study design (retrospective cohort studies, prospective cohort studies, retrospective comparative studies, prospective comparative studies, and randomized controlled studies (RCTs)); 2) study population (patients with femoral neck fracture); 3) intervention (DM-THA or BHA); and 4) outcomes (complications during postoperative follow-up and clinical results). Pooled meta-analysis was carried out to evaluate the dislocation rate after DM-THA and to compare outcomes between DM-THA and BHA. Results. A total of 17 studies (ten cohort studies on DM-THA and seven comparative studies of DM-THA and BHA) were selected. These studies included 2,793 patients (2,799 hips), made up of 2,263 DM-THA patients (2,269 hips) and 530 BHA patients (530 hips). In all, 16 studies were analyzed to evaluate dislocation rate after DM-THA. The cumulative dislocation rate was 4% (95% confidence interval (CI) 3 to 5). Seven studies were analyzed to compare the rates dislocation and surgical-site infection. The rate of dislocation was significantly lower in the DM-THA group than in the BHA group (risk ratio (RR) 0.3; 95% CI 0.17 to 0.53, p < 0.001, Z −4.11). There was no significant difference in the rate of surgical-site infection between the two groups (p = 0.580). Six studies reported all-cause reoperations. The rate of reoperation was significantly lower in the DM-THA group than in the BHA group (RR 0.5; 95% CI 0.32 to 0.78, p = 0.003, Z −3.01). Five studies reported one-year mortality. The mortality rate was significantly lower in the DM-THA group than in the BHA group (RR 0.58 95% CI 0.45 to 0.75, p < 0.0001, Z −4.2). Conclusion. While the evidence available consisted mainly of non-randomized studies, DM-THA appeared to be a viable option for patients with displaced fractures of the femoral neck, with better reported rates of dislocation, reoperation, and mortality than BHA. Cite this article: Bone Joint J 2020;102-B(11):1457–1466

Aims

The rate of dislocation when traditional single bearing implants are used in revision total hip arthroplasty (THA) has been reported to be between 8% and 10%. The use of dual mobility bearings can reduce this risk to between 0.5% and 2%. Dual mobility bearings are more expensive, and it is not clear if the additional clinical benefits constitute value for money for the payers. We aimed to estimate the cost-effectiveness of dual mobility compared with single bearings for patients undergoing revision THA.

INTRODUCTION

Component impingement in total hip arthroplasty (THA) can cause implant damage or dislocation. Dual mobility (DM) implants are thought to reduce dislocation risk, but impingement on metal acetabular bearings may cause femoral component notching. We studied the prevalence of (and risk factors for) femoral notching with DM across two institutions.

The hip's capsular ligaments (CL) passively restrain extreme range of motion (ROM) by wrapping around the native femoral head/neck, and protect against impingement and instability. We compared how CL function was affected by device (hip resurfacing arthroplasty, HRA; dual mobility total hip arthroplasty, DM-THA; and conventional THA, C-THA), and surgical approach (anterior and posterior), with and without CL surgical-repair. We hypothesized that CL function would only be preserved when native head-size (HRA/DM-THA) was restored. CL function was quantified on sixteen cadaveric hips, by measuring ROM by internally (IR) and externally rotating (ER) the hip in six functional positions, ranging from full extension with abduction to full flexion with adduction (squatting). Native ROM was compared to ROM after posterior capsulotomy (right hips) or anterior capsulotomy (left hips), and HRA, and C-THA and DM-THA, before and after CL repair. Independent of approach, ROM increased most following C-THA (max 62°), then DM-THA (max 40°), then HRA (max 19°), indicating later CL engagement and reduced biomechanical function with smaller head-size. Dislocations also occurred in squatting after C-THA and DM-THA. CL-repair following HRA restored ROM to the native hip (max 8°). CL-repair following DM-THA reduced ROM hypermobility in flexed positions only and prevented dislocation (max 36°). CL-repair following C-THA did not reduce ROM or prevent dislocation. For HRA and repair, native anatomy was preserved and ligament function was restored. For DM-THA with repair, ligament function depended on the movement of the mobile-bearing, with increased ROM in positions when ligaments could not wrap around head/neck. For C-THA, the reduced head-size resulted in inferior capsular mechanics in all positions as the ligaments remained slack, irrespective of repair. Choosing devices with anatomic head-sizes (HRA/DM-THA) with capsular repair may have greater effect than surgical approach to protect against instability in the early postoperative period

The hip joint capsular ligaments (CL) passively restrain extreme range of motion (ROM) by wrapping around the native femoral head, and protect against impingement, edge loading wear and dislocation. This study compared how ligament function was affected by device (hip resurfacing arthroplasty, HRA; dual mobility total hip arthroplasty, DM-THA; and conventional THA, C-THA), with and without CL repair. It was hypothesized that ligament function would only be preserved when native anatomy was preserved: with restoration of head-size (HRA or DM-THA) and repair. Eight normal male cadaveric hips were skeletonised, retaining the hip capsule. CL function was quantified by measuring ROM by internally (IR) and externally rotating (ER) the hip in six functional positions, ranging from full extension with abduction to full flexion with adduction (squatting). Native ROM was compared to ROM after posterior capsulotomy and HRA, and C-THA and DM-THA, before and after surgical CL repair. ROM increased most following C-THA (max 62°), then DM-THA (max 40°), then HRA (max 19°), indicating later engagement of the capsule and reduced biomechanical function with smaller head-size. Dislocations also occurred in squatting after C-THA and DM-THA. CL-repair following HRA restored ROM to the native hip (max 8°). CL-repair following DM-THA reduced ROM hypermobility in flexed positions only and prevented dislocation (max 36°). CL-repair following C-THA did not reduce ROM or prevent dislocation. When HRA was combined with repair, native anatomy was preserved and ligament function was restored. For DM-THA with repair, ligament function depended on the movement of the mobile bearing resulting in near-native function in some positions, but increased ROM when ligaments were unable to wrap around the head/neck. Following C-THA, the reduced head-size resulted in inferior capsular mechanics in all positions as the ligaments remained slack, irrespective of repair. Choosing devices with anatomic head-sizes (resurfacing or dual-mobility) and repairing the capsular ligaments may protect against instability in the early postoperative period

Aims

Instability remains a challenging problem in both primary and revision total hip arthroplasty (THA). Dual mobility components confer increased stability, but there are concerns about the unique complications associated with these designs, as well as the long-term survivorship.

Introduction

The causes for revision of primary total hip arthroplasty (THA) are various and quite well known. The developing use of dual-mobility THA (DM-THA) seems a relevant option to decrease the risk of instability. Due to lack of long-term follow-up, this innovative retentive concept is suspected to increase the risk of polyethylene (PE) wear. The aim of the study was to analyse the causes for DM-THA revision and assess whether or not its occurrence is different from that of fixed-standard (FS) THA, particularly for aseptic loosening or wear and/or osteolysis.

Background. Instability and dislocation are some of the most important postoperative complications and potential causes of failure that dual mobility total hip arthroplasty (THA) systems continue to address. Studies have shown that increasing the relative head size provides patients implanted with smaller and larger cups increased stability, greater ROM and a lesser incidence of impingement, without compromising clinical results. The purpose of the current study was to review clinical outcomes in three groups of primary THA patients receiving a dual mobility acetabular shell. Methods. In two US based, post-market, multicenter studies, 450 patients received a primary cementless dual mobility THA. Patients were split into three groups based on cup size: ≤ 50mm, 52mm–56mm, and ≥ 58mm. Harris Hip Scores (HHS), Short Form 12 Physical Components (SF12 PCS), Lower Extremity Activity Scores (LEAS), and Euroqol 5D Score (EQ-5Ds) were collected preoperatively and through 2 years postoperative. Results. The current study displays gender differences among the three groups, with 90% female patients in the ≤ 50mm group, 66% male patients in the 52mm–56mm group and 100% males in the largest cup size group. A posterior/posterolateral approach was used in 94% of cases. The mean age range among the 3 groups was 60.5–61.7 and the two most common concurrent medical conditions were cardiovascular and musculoskeletal. There were no differences observed in clinical outcomes among any of the groups, all of which displayed significant increasing trends through 2 years postoperative (Figure 1). The HHS increased significantly from an average preoperative score of 54.5 to 92.9 and 93.7 at 1 and 2 years. Clinically significant improvements were seen at 2 years in SF12 PCS (+16.5) and the LEAS (+2.4) (Figures 1 and 3). The EQ-5D TTO increased from 0.62 preoperative to 0.91 at 2 years postoperative (Figure 2). There have been no failures due to dislocation reported in the current study population. Conclusion. Positive clinical outcomes for primary THA patients receiving a dual mobility system were seen in the current study, supporting their effectiveness. Regardless of the relative head size, all patients showed significant improvements postoperative with continued stability. As the primary risk factors for instability can include gender, age and increased comorbidities, the contemporary dual mobility system used in this study can address each patient's anatomic differences, improving quality of life and reducing the risk for dislocation, as well as the significant cost implications

Hip dislocation and recurrent instability continue to be a major cause of failure despite advances in materials to optimise offset and head size. The most common cause of revision after total hip arthroplasty (THA) remains recurrent dislocation (22.5%). Dislocation rates following revision THA are even higher than primary THA, and can be as high as 27%. Dual mobility acetabular components were introduced in 1974 by Bousquet to reduce dislocation risk and maintain the low friction concept introduced by Charnley. Dual mobility THA has gained wide acceptance in Europe, but there are still concerns regarding its long-term outcomes in the United States. However, even with noncrosslinked polyethylene and poor implant design, survivorship at 22 years has been shown to be 75%. Little has been published on modular dual mobility (MDM) THA in the revision setting. During revision THA, the benefits of enhanced stability may outweigh the risks of potential unforeseen complications. We present the early results of MDM revision THAs with a low complication rate. In our series, we had a 1.6% dislocation rate, which is significantly lower than what has been published in the literature. However, we urge caution with its use in off label cases, as one of the dislocations was intraprosthetic upon attempted reduction requiring revision to a constrained liner

Background:. Dual mobility components in total hip arthroplasty have been successfully in use in Europe for greater than 25 years. However, these implants have only recently obtained FDA approval and acceptance among North American arthroplasty surgeons. Both decreased dislocation rate and decreased wear rates have been proposed benefits of dual mobility components. These components have been used for primary total hip arthroplasty in patients at high risk for dislocation, total hip arthroplasty in the setting of femoral neck fracture, revision for hip instability, and revision for large metal-on-metal (MoM) hip articulation. The literature for the North American experience is lacking. Purpose:. We report indications, short term outcomes, and complications of a series of subjects who received dual mobility outcomes at one institution. Study Design:. Consecutive subjects who received dual mobility total hip arthroplasty components from February 2010 and April 2013 were identified. Charts were retrospectively reviewed for surgical indications, comorbidities, component sizes, and perioperative complications including infection, dislocation, mechanical failure, and reoperation. Results:. 86 hips in 83 subjects underwent total hip arthroplasty or revision total hip arthroplasty using dual mobility components. There were 56 primary total hips and 30 revision total hips. Indications included small acetabular components in the setting of AVN (13 hips), DDH (12 hips) or severe inflammatory arthritis (5 hips), femoral neck fracture (5 hips), intraoperative instability (6 hips), recurrent postoperative instability (5 hips), and revision of large MoM articulations in the setting of failed hip resurfacing (10 hips) or failed MoM total hip arthroplasty (6 hips). Mean follow up was 1 year (3 months to 3.3 years). There were no complications in the primary total hip group. In the revision total hip group, only one hip dislocated and this was in a patient with familial dysautonomia and insensitivity to pain. One subject underwent reoperation for acute prosthetic joint infection. No other complications were encountered. Overall dislocation rate was 1.1% and overall complication rate was 2.2%. Conclusions:. These results closely mirror that of the European literature. Dual mobility articulations in total hip arthroplasty have a low short term complication rate in this cohort and provide a simple solution to difficult cases. Indications for these implants include primary and revision total hip arthroplasty in patients at high risk for instability and revision of large MoM implants including hip resurfacing

Introduction:. Dual mobility total hip arthroplasty (DM-THA) allows for very large femoral head size, which may be beneficial for hip range of motion (ROM). No clinical study has objectively compared ROM in patients with DM-THA and large (36-mm head) total hip arthroplasty (36-THA). The aim of this prospective case-control study is to test the hypotheses that DM-THA provides superior hip ROM compared to 36-THA by dynamic radiography, and that surgical approach (posterolateral [PL] versus modified anterolateral [AL]) has effect on post-operative hip ROM. Materials and Methods:. Sixteen patients (11 males, 5 females) who had undergone DM-THA with a minimum follow up of one year were age, sex and body mass index (BMI) matched to twenty patients (12 males, 8 females) with 36-THA, all operated upon by the senior author. Maximum hip-trunk flexion, extension and total hip-trunk ROM was calculated on standing lateral digital radiographs of the lower lumbar spine, pelvis and hip, using commercially available software (TraumaCad®, BrainLab, Munich, Germany) from three upright positions; standing neutral, standing with maximum hip flexion and standing with maximum hip extension. Contributions to motion from lumbo-sacral spine (LSS) and pelvic tilt were calculated and subtracted from hip-trunk measurements to quantify true hip flexion, extension and total true hip ROM. Statistical analysis (SPSS software, Chicago, IL) was performed on all radiographic measurements to detect difference in ROM between DM-THA and 36-THA, and to detect difference in ROM between THAs performed through posterolateral (THA-PL) and anterolateral (THA-AL) approaches. Results:. There was no significant difference in age, sex and BMI between groups (p > 0.05). In DM-THA versus 36-THA, hip-trunk flexion (118° +15.3° vs. 112.75° +16.44°), hip-trunk extension (20.88° +6.72° vs. 21.00° +6.00°) and total hip-trunk ROM (139.50° +17.86° vs. 133.75° +16.29°) revealed no statistically significant difference between groups (p > 0.05). Similarly, true hip flexion (100.63° +14.77° vs. 99.85° + 13.55°), extension (12.75 + 6.01° vs. 12.20 + 3.71°) and total true hip ROM (113.38° +19.28° vs. 112.05° +14.84°) did not show statistically significant difference between groups (p > 0.05). No significant difference in true hip flexion or extension existed between THA-PL and THA-AL (p > 0.05). There was no significant difference in total hip-trunk and total true hip ROM between males and females (p > 0.05). Patients with degenerative/stiff LSS (LSS ROM <15°) exhibited significant reduction in hip-trunk total ROM (130.62° +15.97°) compared to patients with flexible (ROM >15°) LSS (144.27° +15.56°) (p = 0.015), without any significant reduction in true total hip ROM (112.81° +16.59° vs. 112.40° +17.46, respectively) (p = 0.943). Conclusion:. DM-THA does not provide superior ROM compared to 36-THA as evidenced by dynamic radiography. PL/AL surgical approach, with presumptive violation of hip extensors/flexors, does not affect post-operative hip extension/flexion, respectively. THA patients with flexible LSS may exhibit apparent increased hip ROM due to compensatory movement at the LSS, rather than an actual increase in true hip ROM

Introduction:. Microseparation has resulted in more than ten-fold increase in ceramic-on-ceramic and metal-on-metal bearing wear, and even fracture in a zirconia head [1–4]. However, despite the greater microseparation reported clinically for metal-on-polyethylene wear, less is known about its potential detrimental effects for this bearing couple. This study was therefore designed to simulate the effects of micromotion using finite element analysis and to validate computational predictions with experimental wear testing. Methods:. Experimental wear rates for low and highly crosslinked polyethylene hip liners were obtained from a previously reported conventional hip wear simulator study [5]. A finite element model of the wear simulation for this design was constructed to replicate experimental conditions and to compute the wear coefficients that matched the experimental wear rates. We have previous described out this method of validation for knee wear simulation studies [6,7]. This wear coefficient was used to predict wear in a Dual-Mobility hip component (Fig 1). Dual mobility total hip arthroplasty components, Restoration ADM (Fig 1), with highly crosslinked acetabular liners were experimentally tested: the control group was subjected to wear testing using the ISO 14242-1 waveform on a hip wear simulator. The microseparation group was subjected to a nominal 0.8 mm lateral microseparation during the swing phase by engaging lateral force springs and reducing the swing phase vertical force. Results:. The wear coefficients that matched experimental wear rates for the low and highly crosslinked polyethylene liners were 4.57×10. −10. and 5.89×10. −11. mm. 3. N. −1. mm. −1. , respectively. Introducing microseparation in the conventional hip increased the wear rate by 15.59 mm. 3. /million cycles in the low crosslinked liner and by 1.12 mm. 3. /million cycles in the highly crosslinked liner (Fig 2). Discussion:. Microseparation did increase predicted wear rates for the low crosslinked polyethylene liner and supports the hypothesis that microseparation can adversely affect the wear of hip arthroplasty. However, the predicted and experimental increase for the dual mobility highly crosslinked liners due to microseparation was low (3.3 mm. 3. and 2.9 mm. 3. /million cycles, respectively) and below the threshold for clinical relevance. The small increase in wear rate in our study supports the high wear tolerance to wear of a dual-mobility sequentially crosslinked polyethylene liner