Aim

There is insufficient evidence to support bony reconstruction of the pubis after a type III internal hemipelvectomy (resection of all or part of the pubis). In this study, we compared surgical complications, postoperative pain, and functional outcome in a series of patients who had undergone a type III internal hemipelvectomy with or without bony reconstruction.

Aims

There is an increased risk of dislocation of the hip after the resection of a periacetabular tumour and endoprosthetic reconstruction of the defect in the hemipelvis. The aim of this study was to determine the rate and timing of dislocation and to identify its risk factors.

Although the introduction of ultraporous metals in the forms of acetabular components and augments has substantially improved the orthopaedic surgeon's ability to reconstruct severely compromised acetabuli, there remain some revision THAs that are beyond the scope of cups, augments, and cages. In situations involving catastrophic bone loss, allograft-prosthetic composites or custom acetabular components may be considered. Custom components offer the potential advantages of immediate, rigid fixation with a superior fit individualised to each patient. These custom triflange components require a preoperative CT scan with three-dimensional (3-D) reconstruction using rapid prototyping technology, which has evolved substantially during the past decade. The surgeon can fine-tune exact component positioning, determine location and length of screws, modify the fixation surface with, for example, the addition of hydroxyapatite, and dictate which screws will be locked to enhance fixation. The general indications for using custom triflange components include: (1) failed prior salvage reconstruction with cage or porous metal construct augments, (2) large contained defects with possible discontinuity, (3) known pelvic discontinuity, and (4) complex multiply surgically treated hips with insufficient bone stock to reconstruct using other means. We previously reported on our center's experience with 23 patients (24 hips) treated with custom triflange components with minimum 2-year follow-up. This method of reconstruction was used in a cohort of patients with Paprosky Type 3B acetabular defects, which represented 3% (30 of 955) of the acetabular revisions we performed during the study period of 2003 to 2012. At a mean follow-up of 4.8 years (range, 2.3 – 9 years) there were four subsequent surgical interventions: two failures secondary to sepsis, and one stem revision and one open reduction internal fixation for periprosthetic femoral fracture. There were two minor complications managed nonoperatively, but all of the components were noted to be well-fixed with no obvious migration or loosening observed on the most recent radiographs. Harris hip scores improved from a mean of 42 (SD ±16) before surgery to 65 (SD ±18) at latest follow-up (p < 0.001). More recently, we participated in a multi-center study of 95 patients treated with reconstruction using custom triflange components who had a mean follow-up of 3.5 years. Pelvic defects included Paprosky Type 2C, 3A, 3B and pelvic discontinuity. Concomitant femoral revision was performed in 21 hips. Implants used a mean of 12 screws with 3 locking screws. Twenty of 95 patients (21%) experienced at least one complication, including 6% dislocation, 6% infection, and 2% femoral-related issues. Implants were ultimately removed in 11% of hips. One hip was revised for possible component loosening. Survivorship with aseptic loosening as the endpoint was 99%. Custom acetabular triflange components represent yet another tool in the reconstructive surgeon's armamentarium. These devices can be helpful in situations of catastrophic bone loss, achieving reliable fixation. Clinical results are inferior to both primary THA and more routine revision THA. Patients and surgeons should be aware of the increased complications associated with these complex hip revisions

Although the introduction of ultraporous metals in the forms of acetabular components and augments has substantially improved the orthopaedic surgeon's ability to reconstruct severely compromised acetabuli, there remain some revision THAs that are beyond the scope of cups, augments, and cages. In situations involving catastrophic bone loss, allograft-prosthetic composites or custom acetabular components may be considered. Custom components offer the potential advantages of immediate, rigid fixation with a superior fit individualised to each patient. These custom triflange components require a pre-operative CT scan with 3-D reconstruction using rapid prototyping technology. The surgeon can fine-tune exact component positioning, determine location and length of screws, modify the fixation surface with, for example, the addition of hydroxyapatite, and dictate which screws will be locked to enhance fixation. The general indications for using custom triflange components include: (1) failed prior salvage reconstruction with cage or porous metal construct augments, (2) large contained defects with possible discontinuity, (3) known pelvic discontinuity, and (4) complex multiply surgically treated hips with insufficient bone stock to reconstruct using other means. The general indications for using custom triflange components include: (1) failed prior salvage reconstruction with cage or porous metal construct augments, (2) large contained defects with possible discontinuity, (3) known pelvic discontinuity, and (4) complex multiply surgically treated hips with insufficient bone stock to reconstruct using other means. We previously reported on our center's experience with 23 patients (24 hips) treated with custom triflange components with minimum 2-year follow-up. This method of reconstruction was used in a cohort of patients with Paprosky Type 3B acetabular defects, which represented 3% (30 of 955) of the acetabular revisions we performed during the study period of 2003 to 2012. At a mean follow-up of 4.8 years (range, 2.3–9 years) there were 4 subsequent surgical interventions: 2 failures secondary to sepsis, and 1 stem revision and 1 open reduction internal fixation for periprosthetic femoral fracture. There were two minor complications managed non-operatively, but all of the components were noted to be well-fixed with no obvious migration or loosening observed on the most recent radiographs. Harris Hip Scores improved from a mean of 42 (SD ±16) before surgery to 65 (SD ±18) at latest follow-up (p<0.001). More recently, we participated in a multi-center study of 95 patients treated with reconstruction using custom triflange components w a mean follow-up of 3.5 years. Pelvic defects included Paprosky Type 2C, 3A, 3B and pelvic discontinuity. Concomitant femoral revision was performed in 21 hips. Implants used a mean of 12 screws with 3 locking screws. Twenty of 95 patients (21%) experienced at least one complication, including 6% dislocation, 6% infection, and 2% femoral-related issues. Implants were ultimately removed in 11% of hips. One hip was revised for possible component loosening. Survivorship with aseptic loosening as the endpoint was 99%. Custom acetabular triflange components represent yet another tool in the reconstructive surgeon's armamentarium. These devices can be helpful in situations of catastrophic bone loss, achieving reliable fixation. Clinical results are inferior to both primary THA and more routine revision THA. Patients and surgeons should be aware of the increased complications associated with these complex hip revisions

Aims

Few reconstructive techniques are available for patients requiring complex acetabular revisions such as those involving Paprosky type 2C, 3A and 3B deficiencies and pelvic discontinuity. Our aim was to describe the development of the patient specific Triflange acetabular component for use in these patients, the surgical technique and mid-term results. We include a description of the pre-operative CT scanning, the construction of a model, operative planning, and surgical technique. All implants were coated with porous plasma spray and hydroxyapatite if desired.

Additive manufacturing has enabled a radical change in how surgeons reconstruct massive acetabular defects in revision hip surgery. We report on the early clinical and radiological results from our methods for surgical planning, design, and implantation of 3D printed trabecular titanium implants in a cohort of patients with large unclassifiable pelvic defects. We set up a prospective investigation involving 7 consecutive patients. Inclusion criteria was the following: 1) A history of previous total hip replacement; and 2) Current imaging showing at least a Paprosky 3B defect. Planned acetabular inclination and version was 40° and 20° respectively. Post operatively all patients had a CT scan which was analysed with software to determine component position and compared to planned. Outpatient review was done at 2 weeks (For wound), 6 weeks (for weight bearing and fixation) and 52 weeks (for fixation and infection) post-operative. The median age at surgery was: 65 years (40–78). The median bone defect volume was 140cm. 3. Median surgery length was 5.2 hours (3–6.25). Median blood loss was 1300mL (450– 2000). Radiologically, components were stable and no screw breakages were identified. Achieved inclination was 41.0° (29.0–55.6) and achieved version was 15.8° (3.8–43.6). Median Oxford Hip score improved from 9 (2–44) to 25 (18–32). We have demonstrated a new series of pre, intra and post-operative methods for reconstruction of unclassifiable acetabular bony defects. Initial clinical and radiological results are excellent considering the severity of the bony defects. We recommend the use of our or similar methods when trying to reconstruct these defects

Aims

To evaluate the outcomes of cemented total hip arthroplasty (THA) following a fracture of the acetabulum, with evaluation of risk factors and comparison with a patient group with no history of fracture.

Although the introduction of ultraporous metals in the forms of acetabular components and augments has substantially improved the orthopaedic surgeon's ability to reconstruct severely compromised acetabuli, there remain some revision THAs that are beyond the scope of cups, augments, and cages. In situations involving catastrophic bone loss, allograft-prosthetic composites or custom acetabular components may be considered. Custom components offer the potential advantages of immediate, rigid fixation with a superior fit individualised to each patient. These custom triflange components require a pre-operative CT scan with three-dimensional (3-D) reconstruction using rapid prototyping technology, which has evolved substantially during the past decade. The surgeon can fine-tune exact component positioning, determine location and length of screws, modify the fixation surface with, for example, the addition of hydroxyapatite, and dictate which screws will be locked to enhance fixation. The general indications for using custom triflange components include: (1) failed prior salvage reconstruction with cage or porous metal construct augments, (2) large contained defects with possible discontinuity, (3) known pelvic discontinuity, and (4) complex multiply surgically treated hips with insufficient bone stock to reconstruct using other means. The general indications for using custom triflange components include: (1) failed prior salvage reconstruction with cage or porous metal construct augments, (2) large contained defects with possible discontinuity, (3) known pelvic discontinuity, and (4) complex multiply surgically treated hips with insufficient bone stock to reconstruct using other means. We previously reported on our center's experience with 23 patients (24 hips) treated with custom triflange components with minimum 2-year follow-up. This method of reconstruction was used in a cohort of patients with Paprosky Type 3B acetabular defects, which represented 3% (30 of 955) of the acetabular revisions we performed during the study period of 2003 to 2012. At a mean follow-up of 4.8 years (range, 2.3–9 years) there were 4 subsequent surgical interventions: 2 failures secondary to sepsis, and 1 stem revision and 1 open reduction internal fixation for periprosthetic femoral fracture. There were 2 minor complications managed nonoperatively, but all of the components were noted to be well-fixed with no obvious migration or loosening observed on the most recent radiographs. Harris hip scores improved from a mean of 42 (SD ± 16) before surgery to 65 (SD ± 18) at latest follow-up (p<0.001). More recently, we participated in a multi-center study of 95 patients treated with reconstruction using custom triflange components who had a mean follow-up of 3.5 years. Pelvic defects included Paprosky Type 2C, 3A, 3B and pelvic discontinuity. Concomitant femoral revision was performed in 21 hips. Implants used a mean of 12 screws with 3 locking screws. Twenty of 95 patients (21%) experienced at least one complication, including 6% dislocation, 6% infection, and 2% femoral-related issues. Implants were ultimately removed in 11% of hips. One hip was revised for possible component loosening. Survivorship with aseptic loosening as the endpoint was 99%,. Custom acetabular triflange components represent yet another tool in the reconstructive surgeon's armamentarium. These devices can be helpful in situations of catastrophic bone loss, achieving reliable fixation. Clinical results are inferior to both primary THA and more routine revision THA. Patients and surgeons should be aware of the increased complications associated with these complex hip revisions

Aims

The aims of this retrospective study were to report the feasibility of using 3D-printing technology for patients with a pelvic tumour who underwent reconstruction.

Peri-acetabular tumour resections and their subsequent reconstruction are among the most challenging procedures in orthopaedic oncology. Despite the fact that a number of different pelvic endoprostheses have been introduced, rates of complication remain high and long-term results are mostly lacking.

In this retrospective study, we aimed to evaluate the outcome of reconstructing a peri-acetabular defect with a pedestal cup endoprosthesis after a type 2 or type 2/3 internal hemipelvectomy.

A total of 19 patients (11M:8F) with a mean age of 48 years (14 to 72) were included, most of whom had been treated for a primary bone tumour (n = 16) between 2003 and 2009. After a mean follow-up of 39 months (28 days to 8.7 years) seven patients had died. After a mean follow-up of 7.9 years (4.3 to 10.5), 12 patients were alive, of whom 11 were disease-free. Complications occurred in 15 patients. Three had recurrent dislocations and three experienced aseptic loosening. There were no mechanical failures. Infection occurred in nine patients, six of whom required removal of the prosthesis. Two patients underwent hindquarter amputation for local recurrence.

The implant survival rate at five years was 50% for all reasons, and 61% for non-oncological reasons. The mean Musculoskeletal Tumor Society score at final follow-up was 49% (13 to 87).

Based on these poor results, we advise caution if using the pedestal cup for reconstruction of a peri-acetabular tumour resection.

Cite this article: Bone Joint J 2014;96-B:1706–12.

A pelvic discontinuity occurs when the superior and inferior parts of the hemi-pelvis are no longer connected, which is difficult to manage when associated with a failed total hip replacement. Chronic pelvic discontinuity is found in 0.9% to 2.1% of hip revision cases with risk factors including severe pelvic bone loss, female gender, prior pelvic radiation and rheumatoid arthritis. Common treatment options include: pelvic plating with allograft, cage reconstruction, custom triflange implants, and porous tantalum implants with modular augments. The optimal technique is dependent upon the degree of the discontinuity, the amount of available bone stock and the likelihood of achieving stable healing between the two segments. A method of treating pelvic discontinuity using porous tantalum components with a distraction technique that achieves both initial stability and subsequent long-term biological fixation is described.

Cite this article: Bone Joint J 2014;96-B(11 Suppl A):73–7.

Introduction

As population grows older, and patients receive primary joint replacements at younger age, more and more patients receive a total hip prosthesis nowadays. Ten-year failure rates of revision hip replacements are estimated at 25.6%. The acetabular component is involved in over 58% of those failures. From the second revision on, the pelvic bone stock is significantly reduced and any standard device proves inadequate in the long term [Villanueva et al. 2008]. To deal with these challenges, a custom approach could prove valuable [Deboer et al. 2007].

Intrapelvic migration of the acetabular component of a total hip replacement, with severe acetabular destruction making reconstruction impossible, is very rare. We present a patient in whom the component was removed using a laparotomy and a transperitoneal approach with subsequent salvage using a saddle prosthesis and a total femoral replacement.

Endoprosthetic replacement of the pelvis is one of the most challenging types of limb-salvage surgery, with a high rate of complications. In an attempt to reduce this and build greater versatility into the reconstruction process, a new type of pelvic endoprosthesis was developed in 2003, based on the old McKee-Farrar prosthesis. This study reviews the outcomes in 27 patients who had an ice-cream cone pelvic prosthesis inserted at two different specialist bone tumour centres in the United Kingdom over the past six years. The indications for treatment included primary bone tumours in 19 patients and metastatic disease in two, and six implants were inserted following failure of a previous pelvic reconstruction. Most of the patients had a P2+P3 resection as classified by Enneking, and most had resection of the ilium above the sciatic notch. The mean age of the patients at operation was 49 years (13 to 81). Complications occurred in ten patients (37.0%), of which dislocation was the most common, affecting four patients (14.8%). A total of three patients (11.1%) developed a deep infection around the prosthesis but all were successfully controlled by early intervention and two patients (7.4%) developed a local recurrence, at the same time as widespread metastases appeared. In one patient the prosthesis was removed for severe pain.

This method of treatment is still associated with high morbidity, but early results are promising. Complications are diminishing with increasing experience.

Fibula autograft reconstruction, both vascularised (v) and non-vascularised (nv), has been established as a standard method in limb salvage surgery of bone and soft tissue tumours of the extremities. This study retrospectively analyses the results of fibula autograft procedures in general and in relation to vascular reconstruction or simple bone grafting. Since the implementation of the Vienna Tumour Registry in 1969, 26 vascularised and 27 non-vascularised fibula transfers have been performed at our institution in 53 patients, 26 males and 27 females with an average age of 21 years (range 4 to 62 years). Indications included osteosarcoma in 18, Ewing’s Sarcoma in 15, adamantinoma in 5, leiomyosarcoma in 3 and others in 12. Thirty patients were operated for reconstruction of the tibia (8v/22 nv), 7 for the femur (6v/1nv), 7 for defects of the forearm (4v/3nv), 5 for metarsal defects (all v), 3 for the humerus (1v/2nv) and one patient was treated for a pelvic defect (nv). Average follow-up was 63 months (range 2 to 259 months). 43 patients showed successful primary bony union of the autograft. In 12 cases pseudarthrosis indicated further surgical revision, 9 of these patients were primarily reconstructed by use of a nv autograft. 4 patients, 2 with v and 2 with nv reconstruction, suffered a fracture of the transplant and were operated for secondary osteosynthesis. 10 patients with v bone graft developed wound healing disturbances which led to surgery, 2 patients with nv grafts suffered such complications. In 2 patients recurrent infection of a nv and a v fibula transfer led to the implantation of a modular tumour prostheses or amputation, retrospectively. Function of all patients with primary bone healing was rated satisfactory. The use of fibula autograft in limb-salvage surgery under oncological conditions allows biological reconstruction with good functional outcome, especially when primary bone healing is achieved. Vascularised bone grafting seems to have a better outcome in terms of primary bone healing than simple fibula bone grafting, and thus represents a feasible choice in the reconstruction of bone defects from tumour resection

A retrospective review of our prospectively collected database was undertaken to determine the functional and oncologic outcome following combined pelvic allograft and total hip arthroplasty (THA) reconstruction of large pelvic bone defects following tumour resection. There were twenty-four patients with a minimum followup of fifteen months. The complication rate following hemipel-vic allograft and THA reconstruction of resection Types I+II and I+II+III was high, but when successful this reconstruction resulted in reasonable functional outcome. In comparison, the functional outcome after allograft and THA reconstruction of isolated Type II acetabular resections was better and more predictable. Resection of large pelvic bone tumours often results in segmental defects with pelvic discontinuity and loss of the acetabulum. We reviewed the functional and oncologic outcomes following pelvic allograft and total hip arthroplasty (THA) reconstruction. Reconstruction of large pelvic defects including the acetabulum using hemipelvic allograft and THA is associated with high complication rates, however when successful provides reasonable function. In comparison, the outcomes of allograft and THA for acetabular defects alone are better and more predictable. A retrospective review of our prospectively collected database was undertaken. Minimum followup was fifteen months (15–167). Nineteen patients were hemipel-vic resections (twelve Type I+II and seven Type I+II+III, eleven cases including partial sacral resection) reconstructed by hemipelvic allograft and THA. Five patients had Type II acetabular resections, reconstructed with structural allograft, roof ring and THA. Osteosarcoma and chondrosarcoma were the most frequent tumours. All patients required walking aids. In the hemipelvic group there were two early deaths (peri-operative haemorrhage and aplastic anaemia). In seven patients (37%) the allograft remained intact without infection but three required revision THA for loosening. For these seven patients the functional outcome scores were TESS 64%, MSTS87 17/35 and MSTS93 of 45% (mean fifty-two months.). There were nine cases of deep infection (47%) with three patients maintaining a functional implant. The nineteenth patient was revised following allograft fracture. In the Type II acetabular group, three patients had no complications, and two patients dislocated. The average scores were TESS 78%, MSTS87 21/35 and MSTS93 64% (mean fifty-five months)

We report our early experience with a new peri-acetabular reconstruction endoprosthesis used for pelvic reconstruction after tumour resection. The outcome of 21 patients who underwent limb salvage following type II pelvic resection and reconstruction using the peri-acetabular reconstruction prosthesis between 2000 and 2006 was retrospectively reviewed. This prosthesis was designed to use the remaining part of the ilium to support a horizontally placed acetabular component secured with internal fixation and bone cement. Into this device a constrained acetabular liner is positioned which is articulates with a conventional femoral component to which a modular extension and modular head are attached. The mean follow-up was 20.5 months (1 to 77). The most common complications were deep infection, superficial wound infections, and dislocation. The mean musculoskeletal tumor society functional outcome score for the survivors was 20.1(11 to 27).

We recommend the use of the peri-acetabular reconstruction prosthesis for reconstruction of large defects after type II pelvic resection, as this design has a greater inherent stability over other available prostheses.

Introduction and Aims: The standard treatment for an infected total hip replacement involves removal of all foreign material and re-implantation in either one or two stages with antibiotic cement. This study has investigated the use of cementless reconstruction in infected hip arthroplasties to determine if there is a difference in the re-infection rate. Method: Thirteen patients (three females and 10 males) with an average age of 67 have been followed-up prospectively after revision hip surgery for infection. Removal of the prosthesis was followed by six weeks intravenous antibiotics and in some cases a period of oral therapy. Reconstruction was undertaken at a median of four months post Girdlestone’s arthroplasty, with the exception of a one-stage exchange for medical reasons. Cementless titanium femoral components were used in all revisions and titanium acetabular components where applicable. Allograft and cage reconstruction were employed for major pelvic defects. Results: Patients have been followed-up for an average of 58 months (range 12–96 months), with no loss to follow-up. Bacteria were cultured from eleven (11) of the thirteen (13) patients and the other two were clinically septic. Bacteria cultured included MRSA, Staph. Aureus, E.Coli and Strep. Faecalis. All prostheses remain in situ with improvement in both Charnley and Oxford hip scores. No recurrence of infection has been documented clinically or radiologically and no component is loose. Conclusion: Debate still exists about the merits of one vs. two-stage reconstruction for infected hip arthroplasty. This series with mid-term follow-up demonstrates that cementless reconstruction for infected hip arthroplasty is successful in providing an infection-free stable revision

Introduction and Aims: Resection of large pelvic bone tumors often results in segmental defects with pelvic discontinuity and loss of the acetabulum. We reviewed the functional and oncologic outcomes following pelvic allograft and total hip arthroplasty (THA) reconstruction. Method: A retrospective review of our prospectively collected database was undertaken. Minimum follow-up was 15 months (range 15–167 months). Nineteen patients were hemipelvic resections (12 Type I+II and seven Type I+II+III, 11 of these cases included partial sacral resection) reconstructed by hemipelvic allograft and THA. In comparison, five patients had Type II acetabular resections, reconstructed with structural allograft, roof ring and THA. Functional outcome was assessed by the Toronto Extremity Salvage score (TESS) and the Musculoskeletal Tumor Society scores (MSTS87 and MSTS93). Results: Osteosarcoma and chondrosarcoma were the most frequent tumors. All patients required walking aids. In the hemipelvic group there were two early deaths (peri-operative haemorrhage and aplastic anaemia). In seven patients (37%), the allograft remained intact without infection but three required revision THA for component loosening. For these seven patients, the functional outcome scores were TESS 64%, MSTS87 17/35 and MSTS93 45% (mean follow-up 52 months). There were nine cases of deep infection (47%) with three patients maintaining a functional implant with antibiotic suppression. Of the remaining six patients with infection, four patients required hindquarter amputation, one patient required allograft removal and the allograft fragmented in the remaining patient. The 19th patient was revised following allograft fracture. Five patients sustained at least one allograft fracture. In the Type II acetabular group, three patients had no complications, and two patients sustained dislocations. The average scores were TESS 78%, MSTS87 21/35 and MSTS93 64% (mean follow-up 55 months). Conclusion: Reconstruction of large pelvic defects including the acetabulum using hemipelvic allograft and THA is associated with high complication rates, however when successful provides reasonable function. In comparison, the functional outcome after allograft and THA reconstruction of isolated Type II acetabular resections was better and more predictable