The trend towards more minimal access has led to a series of instruments being developed to enable adequate access for Direct Anterior Approach (DAA) for hip arthroplasty. These include longer levers, hooks attached to the operating table and a series of special attachments to the operating table to position the leg and apply traction where necessary. The forces applied in this way may be transmitted locally, damaging muscle used as a fulcrum, or the knee and ankle joints when torque has to be applied to the femur through a boot. The arthroplasty surgeon's aim is to minimise the forces applied to both bone and soft tissue during surgery. We surmised that the forces needed for adequate access were related to the extent of the capsular and soft tissue releases, and that they could be measured and optimised. with the aim of minimising the forces applied to the tissues around the hip. Eight fresh frozen specimens from pelvis to mid tibia from four cadavers were approached using the DAA. A 6-axis force/torque sensor and 6-axis motion tracking sensor were attached to a threaded rod securely fastened to the tibial and femoral diaphysis. The torque needed to provide first extension, then external rotation, adequate for hip arthroplasty were measured as the capsular structures were divided sequentially. The Zona Orbicularis (ZO) and Ischiofemoral Ligament(IFL) contributed most of the resistance to both extension (4.0 and 3.1Nm) and external rotation torque (5.8 and 3.9Nm). The contributions of the conjoint tendon (1.5 and 2.4Nm) and piriformis (1.2 and 2.3Nm) were substantially smaller. By releasing the Zona Orbicularis and Ischiofemoral Ligament, the torque needed to deliver the femur for hip arthroplasty could be reduced to less than the torque needed to open a jar (2.9–5.5Nm)

With the identification of literature shortfalls on the techniques employed in intraoperative navigated (ION) spinal surgery, we outline a number of measures which have been synthesised into a coherent operative technique. These include positioning, dissection, management of the reference frame, the grip, the angle of attack, the drill, the template, the pedicle screw, the wire, and navigated intrathecal analgesia. Optimizing techniques to improve accuracy allow an overall reduction of the repetition of the surgical steps with its associated productivity benefits including time, cost, radiation, and safety.

Cite this article: Bone Joint J 2020;102-B(3):371–375.

Aims

Intraoperative 3D navigation (ION) allows high accuracy to be achieved in spinal surgery, but poor workflow has prevented its widespread uptake. The technical demands on ION when used in patients with adolescent idiopathic scoliosis (AIS) are higher than for other more established indications. Lean principles have been applied to industry and to health care with good effects. While ensuring optimal accuracy of instrumentation and safety, the implementation of ION and its associated productivity was evaluated in this study for AIS surgery in order to enhance the workflow of this technique. The aim was to optimize the use of ION by the application of lean principles in AIS surgery.

Aims

Minimally invasive transforaminal lumbar interbody fusion (MITLIF) has been well validated in overweight and obese patients who are consequently subject to a higher radiation exposure. This prospective multicentre study aimed to investigate the efficacy of a novel lumbar localisation system for MITLIF in overweight patients.

Aims

Computer hexapod assisted orthopaedic surgery (CHAOS), is a method to achieve the intra-operative correction of long bone deformities using a hexapod external fixator before definitive internal fixation with minimally invasive stabilisation techniques.

The aims of this study were to determine the reliability of this method in a consecutive case series of patients undergoing femoral deformity correction, with a minimum six-month follow-up, to assess the complications and to define the ideal group of patients for whom this treatment is appropriate.

Rib fracture fixation by orthopaedic and cardiothoracic surgeons has become increasingly popular for the treatment of chest injuries in trauma. The literature, though mainly limited to Level II and III evidence, shows favourable results for operative fixation. In this paper we review the literature and discuss the indications for rib fracture fixation, surgical approaches, choice of implants and the future direction for management. With the advent of NICE guidance and new British Orthopaedic Association Standards for Trauma (BOAST) guidelines in production, the management of rib fractures is going to become more and more commonplace.

Calcaneal fracture fixation over the past decade has been practised via an extensile lateral incision. This can be complicated by infection and wound breakdown.

We have developed a new technique for fixation of the calcaneal fractures – MACO. We utilise a 4 cm sub fibular incision to aid joint visualisation and fracture reduction. Fixation is via percutaneous screws.

We analysed our prospectively collected database. 26 fractures were fixed over an 18 month period at Glasgow Royal Infirmary by three consultant surgeons. 22 patients were male and half were smokers. Mean follow up was 5 months (range 1.5 – 18 months).

The mean age of our patients is 41 (range 25–68). The mean pre operative Bohler's angle was 16.7 degrees. Gissane's angle was similarly abnormal with a mean of 129 degrees.

The average duration of surgery was 73 minutes (range 45–100 minutes). Post operatively, Bohler's angle was improved. The mean was 29 degrees. There was no significant difference with Gissane's angle. The mean was 128 degrees.

There were no superficial wound infections. One patient was troubled by wound breakdown with subsequent deep infection. There was no need for metalwork removal in our series of patients. Two patients developed post traumatic osteoarthritis of the sub talar joint. Only one has required sub talar joint fusion.

We conclude that the novel technique which we describe is successful in restoring calcaneal anatomy with few complications. Further follow up is needed to determine the long term outcomes of such surgery.

Background:. Closed femoral shortening (CFS) is a recognised procedure for managing leg length discrepancy (LLD). Method:. We report twenty-nine consecutive patients with LLD who underwent CFS using an intramedullary saw and nail. Mean age was 29.2 years (16.1–65.8). The primary outcome was accuracy of correction. Secondary outcomes were complications, union, ASAMI score and re-operation, alongside Patient Reported Outcome Measures (PROMs), using EQ5D-5L and GROC. Results:. Mean pre-operative limb length discrepancy was 3.4 cm (1.5–6.5). Mean planned and achieved shortening was 2.9 cm (1.7–5.0). Mean follow-up was 2.0 years (0.2–8.4). Minimal access surgery was possible in all cases but careful technique is essential. All patients achieved a correction within 5mm of the planned shortening (range 0–5mm). 28 patients (97%) achieved uncomplicated union. One patient had a non-union requiring exchange nailing and subsequent compression plating. 13 patients had nail removal at a mean of 1.7 years and 3 had locking screw removal. Patients had an overall positive experience with 81% reporting high PROM scores. Discussion:. This technique offered accurate limb length correction with few complications. Patients rehabilitated well with good functional outcomes. Conclusion;. CFS with an intramedullary saw is a well-tolerated and effective technique when managing LLD up to 5cm

We have compared the time to recovery of isokinetic quadriceps strength after total knee replacement (TKR) using three different lengths of incision in the quadriceps. We prospectively randomised 60 patients into one of the three groups according to the length of incision in the quadriceps above the upper border of the patella (2 cm, 4 cm or 6 cm). The strength of the knees was measured pre-operatively and every month post-operatively until the peak quadriceps torque returned to its pre-operative level.

There was no significant difference in the mean operating time, blood loss, hospital stay, alignment or pre-operative isokinetic quadriceps strength between the three groups. Using the Kaplan–Meier method, group A had a similar mean recovery time to group B (2.0 ± 0.2 vs 2.5 ± 0.2 months, p = 0.176). Group C required a significantly longer recovery time (3.4 ± 0.3 months) than the other groups (p < 0.03). However, there were no significant differences in the mean Oxford knee scores one year post-operatively between the groups.

We conclude that an incision of up to 4 cm in the quadriceps does not delay the recovery of its isokinetic strength after TKR.

Cite this article: Bone Joint J 2014;96-B:902–6.

We examined the risk of thrombotic and major bleeding events in patients undergoing total hip and knee replacement (THR and TKR) treated with thromboprophylaxis, using nationwide population-based databases. We identified 83 756 primary procedures performed between 1997 and 2011. The outcomes were symptomatic venous thromboembolism (VTE), myocardial infarction (MI), stroke, death and major bleeding requiring hospitalisation within 90 days of surgery.

A total of 1114 (1.3%) and 483 (0.6%) patients experienced VTE and bleeding, respectively. The annual risk of VTE varied between 0.9% and 1.6%, and of bleeding between 0.4% and 0.8%. The risk of VTE and bleeding was unchanged over a 15-year period. A total of 0.7% of patients died within 90 days, with a decrease from 1% in 1997 to 0.6% in 2011 (p < 0.001). A high level of comorbidity and general anaesthesia were strong risk factors for both VTE and bleeding, with no difference between THR and TKR patients. The risk of both MI and stroke was 0.5%, which remained unchanged during the study period.

In this cohort study of patients undergoing THR and TKR patients in routine clinical practice, approximately 3% experienced VTE, MI, stroke or bleeding. These risks did not decline during the 15-year study period, but the risk of dying fell substantially.

Cite this article: Bone Joint J 2014;96-B:479–85.

The medial approach for the treatment of children with developmental dysplasia of the hip (DDH) in whom closed reduction has failed requires minimal access with negligible blood loss. In the United Kingdom, there is a preference for these children to be treated using an anterolateral approach after the appearance of the ossific nucleus. In this study we compared these two protocols, primarily for the risk of osteonecrosis. Data were gathered prospectively for protocols involving the medial approach (26 hips in 22 children) and the anterolateral approach (22 hips in 21 children) in children aged <  24 months at the time of surgery. Osteonecrosis of the femoral head was assessed with validated scores. The acetabular index (AI) and centre–edge angle (CEA) were also measured. . The mean age of the children at the time of surgery was 11 months (3 to 24) for the medial approach group and 18 months (12 to 24) for the anterolateral group, and the combined mean follow-up was 70 months (26 to 228). Osteonecrosis of the femoral head was evident or asphericity predicted in three of 26 hips (12%) in the medial approach group and four of 22 (18%) in the anterolateral group (p = 0.52). The mean improvement in AI was 8.8° (4° to 12°) and 7.9° (6° to 10°), respectively, at two years post-operatively (p = 0.18). There was no significant difference in CEA values of affected hips between the two groups. Children treated using an early medial approach did not have a higher risk of developing osteonecrosis at early to mid-term follow-up than those treated using a delayed anterolateral approach. The rates of acetabular remodelling were similar for both protocols. Cite this article: Bone Joint J 2014;96-B:406–13

The piriformis muscle is an important landmark in the surgical anatomy of the hip, particularly the posterior approach for total hip replacement (THR). Standard orthopaedic teaching dictates that the tendon must be cut in to allow adequate access to the superior part of the acetabulum and the femoral medullary canal. However, in our experience a routine THR can be performed through a posterior approach without sacrificing this tendon.

We dissected the proximal femora of 15 cadavers in order to clarify the morphological anatomy of the piriformis tendon. We confirmed that the tendon attaches on the crest of the greater trochanter, in a position superior to the trochanteric fossa, away from the entry point for broaching the intramedullary canal during THR. The tendon attachment site encompassed the summit and medial aspect of the greater trochanter as well as a variable attachment to the fibrous capsule of the hip joint. In addition we dissected seven cadavers resecting all posterior attachments except the piriformis muscle and tendon in order to study their relations to the hip joint, as the joint was flexed. At flexion of 90° the piriformis muscle lay directly posterior to the hip joint.

The piriform fossa is a term used by orthopaedic surgeons to refer the trochanteric fossa and normally has no relation to the attachment site of the piriformis tendon. In hip flexion the piriformis lies directly behind the hip joint and might reasonably be considered to contribute to the stability of the joint.

We conclude that the anatomy of the piriformis muscle is often inaccurately described in the current surgical literature and terms are used and interchanged inappropriately.

Cite this article: Bone Joint J 2013;95-B:764–9.

The technical advances in arthroscopic surgery of the hip, including the improved ability to manage the capsule and gain extensile exposure, have been paralleled by a growth in the number of conditions that can be addressed. This expanding list includes symptomatic labral tears, chondral lesions, injuries of the ligamentum teres, femoroacetabular impingement (FAI), capsular laxity and instability, and various extra-articular disorders, including snapping hip syndromes. With a careful diagnostic evaluation and technical execution of well-indicated procedures, arthroscopic surgery of the hip can achieve successful clinical outcomes, with predictable improvements in function and pre-injury levels of physical activity for many patients.

This paper reviews the current position in relation to the use of arthroscopy in the treatment of disorders of the hip.

Cite this article: Bone Joint J 2013;95-B:10–19.

Equinus contracture of the ankle due to a tight Gastrocnemius has been implicated in the pathogenesis of a number of foot and ankle conditions. There are numerous described procedures for release of the Gastrocnemius such as the Strayer procedure.

Our indications for release are in patients with a symptomatic forefoot and an equinus contracture of 5 degrees or more in extension as defined by the Silfverskiöld test. The release is usually combined with a reconstructive procedure. The advantages of our technique are its simplicity, excellent visualisation of the tendon and sural nerve, good wound healing and patient comfort post-operatively.

The procedure can be performed without tourniquet. A 2.5cm incision is made over the medial calf, just distal to the Gastrocnemius muscle indentation. The deep fascia is incised and the edge of the tendon can be visualised. Blunt digital dissection is performed on either side of the tendon to develop a plane. A metal Cusco speculum is inserted to visualise the full width of the tendon. The tenotomy is performed starting medially and the last 5mm of the lateral tendon is left uncut. This reduces the chance of iatrogenic injury to the nerve. The tendon bridge can be left if correction is sufficient, otherwise passive dorsiflexion of the ankle results in completion. Post-operatively, patients are able to mobilise fully with crutches and passive ankle physiotherapy is commenced immediately.

We performed 22 MAGS procedures in 17 patients. There were no Sural nerve injuries and no wound complications. All patients were delighted with cosmesis. Average pre-operative equinus contracture with the leg extended was 18 degrees. Average intra-operative correction of 24 degrees was obtained and at 3 months follow-up, all patients were able to dorsiflex past neutral.

To evaluate the clinical accuracy of computer-assisted fluoroscopy for the placement of percutaneous lumbosacral (LS) pedicle screws. A prospective computed tomographic (CT) analysis was performed in forty consecutive patients. Three independent observers were utilised. Postoperative CT scans of one hundred and fifty-nine titanium pedicle screws (n = 6(L3); thirty-eight(L4); sixty-five(l5) and fifty(S1)) were reviewed. All screws were percutaneously placed using the two-dimensional FluoroNavTM system. The relative position of the screw to the pedicle was graded as follows: I-completely in; II – < 2mm breach; III - = 2–4mm breach; IV – > 4mm breach. The direction of the breach was further classified as well as its trajectory. Correlation between observers was near perfect. The three observers rated 74.2%, 78.6%, and 78.0% of screws were completely contained within the pedicle. The data from the observer with the most significant pedicle breaches is as follows: thirty-five (22%) pedicle breaches (grade II -n=30; III - n=4; IV - n=1/n= 11 medial; n=19 lateral; 5 superior). Only one clinically significant breach occurred medially (grade III) at L5. This required screw revision (performed with a minimal access technique) with complete resolution of acute post-op L5 radiculopathy. The in-vivo percutaneous pedicle breach rate in this study was higher than that reported for similar open navigational techniques. The majority (85.7%) of breaches were minor (< 2mm) and over half (54.3%) were lateral with no potential for clinical squealae. This high lateral breach rate is due to a modified lateral starting point required for the percutaneous technique. However, there is concern that this technique resulted in one clinically significant medial breach and highlights the increased risk associated with percutatneous pedicle screw placement. The findings of this study suggest that improved screw placement accuracy for minimal access instrumented fusions is required

Fully automated robots for the planning and implantation of total hip arthroplasty have completely withdrawn from the market. Reasons were technical problems during the reaming process that lead to postoperative neurological problems. This lead, especially in Germany, to numerous court cases and created a hostile environment regarding robotic orthopaedic surgery. The first steps in the development of a robotic assisted system for total hip arthroplasty are presented. This system will be able to plan and mill both femoral and acetabular implant seat. This project aims to combine the advantages of minimally invasive techniques and navigational systems with the accuracy that robotic assisted bone milling can provide. One of the main goals is the study of the technical problems of previous systems and to develop methods to prevent those. The project-name is RomEo (Robotic minimally invasive Endoprosthetics), the main project partners are the Helmut-Schmidt University/Hamburg and the Department of Trauma and Orthopaedics of the BG Trauma Hospital Hamburg. The paper focuses on:. The determination of forces acting on the femur during milling: The determination of the ideal minimally invasive access route in cadaver operations. The “workspace” created in minimally invasive hip surgery as determined in cadaver operations, including a 3D reconstruction. Possible solutions of the problems of non-invasive patient fixation as determined in cadaver testing with different fixation methods. Feasibility of 3D operation simulation using Voxelman data, access route data and implant CAD data

We aimed to test the biomechanically predicted hypothesis that in massive rotator cuff tears irreparable by conventional methods the newly developed Nottingham Augmentation Device (NAD) would provide greater functional improvement than that gained from the gold standard of arthroscopic subacromial decompression. Thirty patients treated between 2001 and 2004 were assessed by pre- and six month post-operative Constant scoring. Fifteen underwent open acromioplasty and cuff reconstruction using the NAD (mean age 67.3), while 15 underwent a standard arthroscopic decompression (mean age 67.4). The two groups were matched retrospectively based on size of cuff tear, age and sex. Data was analysed using the student’s t-test at the 95% confidence interval. Both groups displayed a statistically significant increase in Constant score after surgery. The mean increase for NAD patients was 18.7 points compared with 17.6 points for those undergoing arthroscopic decompression. However there was no significant difference between the two groups’ improvement and this was even so in the power sub-category, where increased benefit was predicted with the NAD. The NAD requires greater surgical access, operating time and peri-operative analgesia, and no active mobilisation for six weeks. The arthroscopic technique is minimal access, rapid, involves no prosthesis or foreign body insertion and allows immediate mobilisation. However, with clear biomechanical benefits of the NAD seen in vitro, our results may simply reflect cuff tears in an older population group with irreversible tissue changes and less rehabilitative potential. A randomised prospective trial in a younger patient group with more acute tears and less tissue atrophy would appear the next step in determining the NAD’s place in the management of massive rotator cuff tears

We report the clinical and radiological results of a two- to three-year prospective randomised study which was designed to compare a minimally-invasive technique with a standard technique in total knee replacement and was undertaken between January 2004 and May 2007. The mini-midvastus approach was used on 50 patients (group A) and a standard approach on 50 patients (group B). The mean follow-up in both groups was 23 months (24 to 35).

The functional outcome was better in group A up to nine months after operation, as shown by statistically significant differences in the mean function score, mean total score and the mean Oxford knee score (all, p = 0.05). Patients in group A had statistically significant greater early flexion (p = 0.04) and reached their greatest mean knee flexion of 126.5° (95° to 135°) 21 days after operation. However, at final follow-up there was no significant difference in the mean maximum flexion between the groups (p = 0.08). Technical errors were identified in six patients from group A (12%) on radiological evaluation.

Based on these results, the authors currently use minimally-invasive techniques in total knee replacement in selected cases only.