Advertisement for orthosearch.org.uk
Results 1 - 5 of 5
Results per page:
Applied filters
Content I can access

Include Proceedings
Dates
Year From

Year To
Bone & Joint Research
Vol. 12, Issue 2 | Pages 113 - 120
1 Feb 2023
Cai Y Liang J Chen X Zhang G Jing Z Zhang R Lv L Zhang W Dang X

Aims

This study aimed to explore the diagnostic value of synovial fluid neutrophil extracellular traps (SF-NETs) in periprosthetic joint infection (PJI) diagnosis, and compare it with that of microbial culture, serum ESR and CRP, synovial white blood cell (WBC) count, and polymorphonuclear neutrophil percentage (PMN%).

Methods

In a single health centre, patients with suspected PJI were enrolled from January 2013 to December 2021. The inclusion criteria were: 1) patients who were suspected to have PJI; 2) patients with complete medical records; and 3) patients from whom sufficient synovial fluid was obtained for microbial culture and NET test. Patients who received revision surgeries due to aseptic failure (AF) were selected as controls. Synovial fluid was collected for microbial culture and SF-WBC, SF-PNM%, and SF-NET detection. The receiver operating characteristic curve (ROC) of synovial NET, WBC, PMN%, and area under the curve (AUC) were obtained; the diagnostic efficacies of these diagnostic indexes were calculated and compared.


Bone & Joint Research
Vol. 7, Issue 11 | Pages 587 - 594
1 Nov 2018
Zhang R Li G Zeng C Lin C Huang L Huang G Zhao C Feng S Fang H

Objectives

The role of mechanical stress and transforming growth factor beta 1 (TGF-β1) is important in the initiation and progression of osteoarthritis (OA). However, the underlying molecular mechanisms are not clearly known.

Methods

In this study, TGF-β1 from osteoclasts and knee joints were analyzed using a co-cultured cell model and an OA rat model, respectively. Five patients with a femoral neck fracture (four female and one male, mean 73.4 years (68 to 79)) were recruited between January 2015 and December 2015. Results showed that TGF-β1 was significantly upregulated in osteoclasts by cyclic loading in a time- and dose-dependent mode. The osteoclasts were subjected to cyclic loading before being co-cultured with chondrocytes for 24 hours.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 445 - 445
1 Nov 2011
Ren W Zhang R Hawkins M Markel D
Full Access

We have demonstrated that erythromycin (EM) inhibits wear debris-induced macrophage activation and osteo-clastogenesis (both in vitro and in vivo) through targeting NF-κB signalling. Our clinical trial further verified that oral EM can be efficiently delivered to periprosthetic tissue and improve local inflammation. The purpose of this study was to assess the efficacy of periprosthetic EM delivery in a rat osteolysis model.

The PA coated titanium (Ti) pin (Stryker) was loaded with EM (8 μl = 2.8 mg/pin). Drug release assay showed around 25% of loaded EM was remained in the PA layer 24 hours after loading. Rats were divided into three groups:

saline control (n=5);

UHMWPE particle injection (n=7), and

UHMWPE particle injection with EM treatment (n=7).

Uncoated Ti pins were pressfit inserted into right tibia following the injection 200 μl of either UHMWPE particles (5 mg/ml) or saline (control). The revision surgeries were performed 6 weeks after the first surgery. The previous implanted pins were replaced with new Ti pins either with or without EM coating. Rats were then sacrificed one month after “revision surgery”, and the knee joint samples were collected for μCT and histology analysis.

μCT analysis showed that the value of bone volume (bv/tv) in the group treated with EM (0.26 ± 0.07) was significantly higher than the group untreated (0.14 ± 0.04), while there was no significant difference between EM treated group and the saline control group (0.15 ± 0.11). The parameters of cancellous bone structure all pointed a trend of better structure in EM treated group than other two groups. However, this difference did not reach statistical significance. Histology analysis (H& E staining) demonstrated that in the saline control the tibia retained a smooth endocortical surface with a prominent periprosthetic membrane. In the EM-treated group, endocortical erosion was reduced and the peri-prosthetic tissue appeared thinner than uncoated pins.

The overall cellularity of periprosthetic membranes from the EM-treated group was decreased compared to the untreated group. Analysis of membrane thickness revealed a significantly thinner membrane in EM-treated group compared with untreated group and saline control (p< 0.05).

The results of this study seem to indicate that an EM coated Ti pin provided a sufficient drug source to effectively treat wear debris-induced periprosthetic inflammation and osteolysis.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_III | Pages 245 - 245
1 Jul 2011
Saran N Turcotte RÉ Zhang R
Full Access

Purpose: Extracortical bone bridging and ingrowth have been shown to reduce stresses on the stem and cement mantle of tumor endoprostheses. The purpose of this study was to assess the effect of bone morphogenetic protein 7 (BMP-7) delivered by Peri-Apatiteâ (PA, Stryker Orthopaedics) hydroxyapatite coating on porous segmental replacement prostheses.

Method: Eighteen mature mongrel canines were implanted with unilateral segmental replacement prostheses made of a cobalt-chromium (Co-Cr) alloy and coated with two layers of sintered Co-Cr alloy beads (diameter 600 to 800mm). The control group consisted of a plain porous coated segmental prosthesis without any PA coating. Group 2 consisted of a PA-coated segmental prosthesis coated with buffer solution. Group three consisted of a PA-coated segmental prosthesis loaded with rhBMP-7 (Stryker Biotech) in a buffer solution carrier. Group 1 had the implant only. Group 2 had the buffer solution evenly applied to the porous coat and group 3 had 2.9 mg of BMP-7 in liquid buffer solution evenly applied. The canines were allowed to fully bear weight without restrictions. The femurs were retrieved at twelve weeks for radiographic and histologic analysis.

Results: Gross and radiographic data of the retrieved specimens showed that all six PA-coated implants augmented with BMP-7 had complete bone bridging; only one of the PA-coated implants and only two of the plain porous implants were completely bridged. There was a greater percentage of bone apposition for the BMP-7 augmented PA-coated group compared to both the plain (p=0.0026) and the PA-coated (p=0.0001). There was no difference in bone formation or bone apposition between the plain and PA-coated groups. Histology revealed greater depth of bone ingrowth in the BMP-7 augmented PA-coated group as compared to the plain (p< 0.0001) and the PA-coated (p< 0.0001) groups. There was also significantly greater bone apposition in the BMP-7 augmented PA coated groups as compared to the plain (p=0.0014) and PA-coated (p=0.0067) groups. There was no significant difference in depth of bone ingrowth or bone apposition between the plain and PA-coated groups.

Conclusion: BMP-7 when used to augment PA-coated prostheses in a canine segmental defect model can significantly improve extracortical bone bridging and bone ingrowth. PA-coated implants may be considered to deliver the exogenous biological growth factors.


Orthopaedic Proceedings
Vol. 90-B, Issue SUPP_I | Pages 98 - 99
1 Mar 2008
Dickey I Hugate R Reach J Zobitz M Zhang R G M
Full Access

Trabecular materials show great promise for soft-tissue attachment to prosthetic implants. Results with Tantalum have been very encouraging, however, it remains unclear if this in-growth is secondary to the specific metal or its generic structure,. If structure, is there a specific tolerance with respect to porosity and pore size? In a canine model, bulk blocks of porous alumina ceramic were shown to be completely ingrown by four weeks. The type material was not a factor, and effect of pore size revealed that there is a wide tolerance in facilitating in-growth with the larger pores having the greatest attachment strength (p=0.004).

This study examines the in-vivo soft tissue in-growth potential of porous alumina ceramic and the effect of three distinct pore size ranges on this process.

Alumina ceramic implants of fixed porosity (~ 85%) were designed in three pore size ranges (100–200, 250–400 and 600–800 μM). Using an established canine model, six implants (two of each type) were implanted in the dorsal subcutaneous tissues of tweleve mature canines and examined histologically and mechanically at four, eight and sixteen weeks with respect to type, amount and strength of soft tissue in-growth.

Soft tissue in-growth was grossly evident in all implants at each time interval, and in each pore size. Microscopic examination revealed neo-vascularized in-growth throughout the implant, without evidence of inflammation or foreign body reaction. Numerous blood vessels were visible at the implant interface and within the porous alumina ceramic structure. With peel testing, the weakest attachment strength was with the small pore size with no differences between the medium and large pore sizes. An increase of attachment strength in each pore size was observed over time.

This study suggests that architecture of porous structures in general, and not the type of material used, confers the biologic activity and that there is a wide tolerance for pore size in facilitating this process in soft tissue in-growth. Further study of other inert foam structures will be useful in further defining the assets and limitations of this genre of trabecular materials as a whole.

Funding: Stryker Orthopaedics, Mahwah, NJ

Please contact author for figures, graphs, and/or diagrams.